Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive an Infiniti FX35 and want a wider stance or need extra clearance for aftermarket wheels, choosing the right wheel spacers matters. The correct spacer preserves safe wheel alignment, maintains hub engagement, and reduces the risk of vibration or premature wear.This guide presents seven shortlisted Infiniti FX35 wheel spacers that passed our editorial checks. We evaluated fitment, construction quality, and installation considerations to help you find spacers that match your goals. Read on for the selection rationale and the factors to weigh before installing spacers.
Looking for other parts? See all Infiniti FX35 parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | KSP Performance 5×114.3 Hubcentric Wheel Spacers 25mm (4-pack) |  |
| Best Quality Built to a higher standard if you want something more solid | Customadeonly Forged 5×114.3 Hubcentric Wheel Spacers 25mm (2 pcs) |  |
| Best Value The sweet spot between price and what you get | StanceMagic 5mm Hubcentric 5×114.3 Wheel Spacers (66.1mm Bore) — 2pcs |  |
| Best budget The cheapest option that still gets the job done reliably | MZS 5×114.3 6mm Wheel Spacers (5-lug) |  |
| Highest Rated A top-rated pick with lots of positive feedback | Customadeonly 5×114.3 Wheel Spacers, 3" Thick (2-piece) |  |
| Most popular A crowd favorite that many people choose with confidence | StanceMagic 25mm Hubcentric 5×114.3 Wheel Spacers (66.1mm Bore, 12×1.25 Studs) — 2-Pack |  |
| Best Seller A high-volume bestseller chosen again and again | dynofit 5×114.3 Wheel Spacers 1" (25mm), Hubcentric 66.1mm, M12x1.25, Set of 4 |  |
1. KSP Performance 5×114.3 Hubcentric Wheel Spacers 25mm (4-pack)
| Bolt pattern | 5×114.3 |
|---|---|
| Hub bore | 66.1mm |
| Thread pitch | M12x1.25 |
| Thickness | 25mm |
These KSP Performance spacers are forged 25mm hubcentric adapters for vehicles with a 5×114.3 bolt pattern and 66.1mm hub bore, designed to move the wheel out one inch per spacer. They are typically used to correct clearance issues, make aftermarket wheels sit flush, or widen track width on an Infiniti FX35. The spacers are machined for a hub-centric fit to reduce vibration and come with hardened grade 10.9 bolts and thread locker for secure fastening. Forged 6061-T6 aluminum construction and heat treatment give them better strength than common cast alternatives, which is useful for spirited driving or heavier vehicles. Installation is straightforward but requires verifying bolt length before fitting and following the recommended torque. Some users report occasional tolerance issues with hub bore fit, so checking fitment on your FX35 hub before driving at high speeds is prudent. These spacers provide a solid balance of strength and value when you need a reliable, bolt-on way to improve wheel fitment on an FX35.
Best for: Balanced all-round buyers who want a practical, factory-quality upgrade to correct wheel fitment and improve stance on an Infiniti FX35 while keeping strength and ease of installation in mind.
Less Ideal for: Drivers seeking adjustable or shim-style spacing solutions or those who need spacers for hubs with a different bore size should look elsewhere.
- Forged 6061-T6 aluminum construction offers higher strength than typical cast spacers.
- Hubcentric design with lip reduces the chance of vibration when properly fitted to a 66.1mm hub.
- Includes hardened grade 10.9 bolts and thread locker for secure fastening.
- 25mm thickness provides a noticeable one-inch offset to correct clearance or flush fitment.
- Only fits hubs with a 66.1mm bore so it will not center on other hub sizes.
- Some reviewers report loose tolerance on a minority of units which can cause vibration at speed.
- Requires checking and possibly trimming long wheel studs before installation.
Verdict: A strong, hubcentric 25mm forged spacer that reliably corrects wheel fitment on a 5×114.3 Infiniti FX35 when you confirm proper 66.1mm hub alignment.
2. Customadeonly Forged 5×114.3 Hubcentric Wheel Spacers 25mm (2 pcs)
| Bolt pattern | 5×114.3 |
|---|---|
| Center bore | 66.1mm |
| Thickness per side | 25mm |
| Material | 6061 T6 aluminum |
| Stud grade | Class 10.9 steel studs |
These Customadeonly spacers are designed to push wheels out by about 25mm per side and install as a bolt-on hubcentric solution for 5×114.3 66.1mm applications. Typical use is to correct wheel offset, clear brake or suspension components, and give a wider track for improved stance and cornering feel on compatible Infiniti models such as the FX35. The spacers are CNC machined from 6061 T6 aluminum and use heat-treated grade 10.9 studs, which helps ensure consistent fit and long-term durability while keeping unsprung weight low. Being hubcentric reduces the chance of vibration when installed correctly. Practical benefits include improved wheel clearance, a more aggressive wheel fitment, and modest handling gains from a wider track. Important limitations are that the 25mm thickness may be larger than desired on some setups and that proper installation requires correct torqueing and periodic recheck of fasteners to avoid loosening; professional installation is recommended if you are not experienced with wheel hardware.
Best for: Performance-oriented owners seeking a factory-quality spacer to widen track and improve wheel fitment on their Infiniti FX35 for better cornering feel and a more aggressive stance.
Less Ideal for: Owners looking for minimal visual change or who cannot tolerate any risk of wheel protrusion or who prefer suspension modifications instead of spacers should consider other solutions.
- CNC machined hubcentric design for consistent fit and reduced vibration risk
- Made from 6061 T6 aluminum for strength with relatively low weight
- Uses heat-treated class 10.9 studs for reliable clamping and durability
- Bolt-on installation for straightforward fitting on compatible hubs
- 25mm thickness may push wheels noticeably outward and could require fender or suspension checks
- Requires proper torque and periodic recheck of lug hardware to prevent loosening
Verdict: A precision CNC hubcentric spacer that widens the FX35's track for improved stance and handling while keeping weight and vibration risk low.
3. StanceMagic 5mm Hubcentric 5×114.3 Wheel Spacers (66.1mm Bore) — 2pcs
| Thickness | 5mm |
|---|---|
| Bolt Pattern | 5×114.3 |
| Hub Center Bore | 66.1mm |
| Material Type | Aluminum |
These StanceMagic 5mm hubcentric wheel spacers move the wheel out a small amount to fix minor clearance issues and improve stance without heavy modification. CNC machined from billet aluminum and anodized, the spacers are lightweight compared with thicker steel alternatives and center on a 66.1mm hub to reduce wobble when hub and wheel mating surfaces are clean. They are typically used to clear calipers, shocks, or to provide a modest aesthetic poke on Infiniti FX35 wheels that share the 5×114.3 pattern. Installation is straightforward with normal tire tools but may require extended lug bolts or studs and careful torqueing to manufacturer specs; the listing includes safety guidance to re-torque after 25–50 miles. Practical benefits include low added unsprung weight and precise centering when fitment is correct. Limitations are that 5mm is a small offset change so it will not solve major clearance problems and inconsistent machining or dirty mating surfaces can produce vibrations on some units, so inspect and clean surfaces before installation.
Best for: Practical optimizers who want an affordable, lightweight spacer to cure minor clearance issues or add a subtle stance change to an Infiniti FX35 without extensive modification.
Less Ideal for: Drivers who need large offsets for major caliper or wheel fitment changes or who want a guaranteed vibration-free premium machining solution.
- CNC machined from billet aluminum for reduced weight compared with thicker spacers
- Hubcentric 66.1mm bore helps center wheels and reduce vibration when surfaces are clean
- Anodized finish resists surface corrosion
- Thin 5mm thickness provides small clearance gain without major impact on handling
- Only 5mm thickness may be insufficient for larger caliper or tire clearance needs
- Some buyers reported fitment or machining inconsistencies that caused vibration
- Extended lug bolts or studs are not included and may be required for safe installation
Verdict: A lightweight, budget-friendly 5mm hubcentric spacer that fixes small clearance issues and sharpens stance on Infiniti FX35s when installed and torqued correctly.
4. MZS 5×114.3 6mm Wheel Spacers (5-lug)
| Bolt pattern | 5×114.3 / 5×4.5" |
|---|---|
| Thickness | 6mm (1/4") |
| Thread pitch | M12x1.25 |
| Material | CNC aluminum |
These MZS 6mm wheel spacers are a straightforward, budget-focused solution to push 5-lug wheels outward on vehicles using a 5×114.3 bolt pattern. Designed as one-piece CNC-cut aluminum, they slide over the hub to increase clearance and reduce wheel rubbing when installing wider rims or running different wheel offsets. Typical use is simple: remove the wheel, place the spacer over the studs, then reinstall the wheel and torque to spec, with a post-install alignment and re-torque after 25–50 miles recommended. The practical benefits are clear for a cost-conscious buyer: lightweight construction, correct bolt pattern and thread pitch for compatible vehicles, and enough thickness to clear minor interference without changing the bolt pattern. Important limitations are that these are thin 6mm spacers so they only provide small clearance gains and require sufficient stud thread engagement; professional installation is advised to confirm correct stud length and safe fitment. They are not a hub-centric adapter and will not change bolt pattern or provide large offsets.
Best for: Budget-conscious owners looking to correct minor rubbing or fit slightly wider wheels while keeping costs low and installation straightforward.
Less Ideal for: Drivers who need large offsets, permanent heavy-duty wheel adapters, or guaranteed hub-centric fit should consider thicker, hub-centric, or vehicle-specific options instead.
- CNC machined one-piece aluminum construction for consistent fit and light weight
- Verified 5×114.3 (5×4.5) bolt pattern and M12x1.25 thread pitch for compatible wheels
- Thin 6mm thickness provides small, effective clearance without large offset changes
- Easy installation process similar to replacing wheels when studs and thread length are sufficient
- Only 6mm (1/4") thick so not suitable for large clearance or aggressive wheel fitments
- Not a bolt-pattern adapter or hub-centric spacer, so may rely on aftermarket wheels fitting concentrically
- Requires confirming stud length and professional installation for safety
Verdict: A low-cost, CNC-machined 6mm spacer that fixes light rubbing and allows modest wheel clearance on compatible 5×114.3 vehicles but is not for major offset or hub-centric needs.
5. Customadeonly 5×114.3 Wheel Spacers, 3" Thick (2-piece)
| Bolt pattern | 5×114.3 |
|---|---|
| Center bore | 66.1mm |
| Thread pitch | M12x1.25 |
| Thickness per side | 75mm (3 inch) |
These Customadeonly spacers push wheels out by 75mm per side to correct offset, increase track width, and clear calipers or suspension on compatible vehicles. Machined from 6061-T6 aluminum and fitted with heat-treated class 10.9 studs, they are built for repeatable fit and balance; the listing emphasizes CNC production to reduce runout and vibration. Installation is the typical bolt-on process: remove the wheel, mount the spacer to the hub, torque the spacer studs, then mount the wheel to the spacer. In practice they improve stance and can sharpen lateral feel by widening the track, and many owners report no vibration when properly torqued. Limitations to consider are the extreme thickness—3 inches per side—which may change scrub radius and wheel bearing loads and could interfere with some bodywork or inner-wheel components on certain setups. One review noted a cross-threaded stud on arrival, so inspect studs and torque carefully during installation.
Best for: Reliability-focused buyers who prioritize a solid, repeatable fit and want to correct wheel offset or gain track width on an Infiniti FX35 for improved handling and appearance.
Less Ideal for: Drivers who prefer minimal changes to steering geometry or who have heavily loaded, off-road, or towing-focused use cases should choose a smaller spacer or seek a professional alignment and component upgrade instead.
- CNC-machined for consistent fit and reduced runout
- Made from 6061-T6 aluminum with heat-treated class 10.9 studs for durability
- Large 75mm thickness provides substantial offset correction and aggressive stance
- 66.1mm hub-centric bore matches common Infiniti hub dimensions for centered mounting
- Very thick (3 in) spacers can increase stress on wheel bearings and alter steering geometry
- Potential fit issues with some inner fender components or aftermarket wheels due to extreme offset
- One reported case of a cross-threaded stud suggests checking hardware before installation
Verdict: A robust, CNC-machined 3-inch spacer that reliably centers wheels and aggressively widens track on the FX35 but requires careful consideration of steering and bearing loads.
6. StanceMagic 25mm Hubcentric 5×114.3 Wheel Spacers (66.1mm Bore, 12×1.25 Studs) — 2-Pack
| Thickness | 25mm (1.0in) |
|---|---|
| Bolt Pattern | 5×114.3 |
| Hub Bore | 66.1mm |
| Stud Thread Pitch | 12×1.25 |
These StanceMagic 25mm hubcentric spacers push wheels outward by one inch to improve clearance and stance on Infiniti FX35 models that use a 5×114.3 bolt pattern and a 66.1mm hub bore. They are CNC machined from billet aluminum, anodized for corrosion resistance, and ship with heat-treated 10.9 grade steel studs so you get a ready-to-install kit. In practice they are used to eliminate rubbing on control arms or calipers, allow slightly wider tire fitment, and give the car a wider track and more planted look. The hubcentric lip helps center the wheel and reduces vibration risk when installed and torqued correctly. Limitations to plan for are the need to verify stud thread pitch and available stud length before install and the instruction to re-torque lug hardware after 25 to 50 miles; improper fit or rushed installation can cause issues. Buyers should also expect some change in steering feel and should follow the safety warnings about using a torque wrench rather than impact tools.
Best for: Convenience-driven buyers who want a simple bolt-on solution to fix rubbing or fit wider tires on an Infiniti FX35 without custom fabrication and who prefer a kit that includes studs for easier installation.
Less Ideal for: Drivers seeking heavy-duty suspension changes, large wheel offsets, or those unwilling to perform post-install torque checks should consider alternatives or professional installation.
- CNC machined billet aluminum body with anodized finish for corrosion resistance
- Hubcentric 66.1mm bore and lip reduce wheel wobble and help prevent vibrations
- Includes heat-treated 10.9 grade steel studs and matching threads for straightforward installation
- 25mm thickness provides noticeable clearance for rubbing issues and allows modestly wider tires
- Requires verification of stud thread pitch and available stud length before purchase
- Must re-torque lug hardware after initial miles and avoid using impact tools during installation
Verdict: A convenient, hubcentric 25mm spacer kit with studs that resolves clearance issues and improves stance on Infiniti FX35s when installed and torqued correctly.
7. dynofit 5×114.3 Wheel Spacers 1" (25mm), Hubcentric 66.1mm, M12x1.25, Set of 4
| Bolt pattern | 5×114.3 |
|---|---|
| Hub bore | 66.1mm |
| Thickness | 1 inch (25mm) |
| Thread pitch | M12x1.25 |
| Material | Forged 6061-T6 aluminum |
These dynofit spacers move wheels outward by 1 inch (25mm) to improve track width and clearance on 5×114.3 vehicles like the Infiniti FX35. They are forged from 6061-T6 aluminum and CNC processed, which gives them a stronger, corrosion-resistant finish compared with simple cast spacers. The kit is hubcentric with a 66.1mm bore and uses M12x1.25 studs and Grade 10.9 lug bolts that the maker says favor ductile failure over brittle snapping. In practice the spacers are installed between the hub and wheel to correct backspacing, clear brakes or calipers, or to achieve a wider stance; the listing recommends torque values and an alignment after install. Customer reports show many straightforward, rattle-free installs but a few instances of rounded or loose lug hardware, so careful torquing, using proper tools, and thread prep like threadlocker are important. These are a practical, budget-minded option for everyday driving and light spirited use but verify fitment and follow installation precautions for safe service life.
Best for: Risk-averse mainstream buyers who want a low-cost, factory-quality-feeling spacer to correct backspacing and improve stance on an Infiniti FX35 while prioritizing predictable, daily-driving performance.
Less Ideal for: Drivers planning aggressive track use, heavy towing, or those who need a motorsport-grade, engineered spacer should look at specialty high-end options instead.
- Forged 6061-T6 aluminum construction for improved strength over cast spacers
- Hubcentric 66.1mm bore helps center wheel for reduced vibration
- Included Grade 10.9 M12x1.25 studs/bolts and DACROMAT treatment for corrosion resistance
- CNC processing and anodized finish improve durability and appearance
- Some users reported lug hardware rounding or loosening when not torqued or installed properly
- Not a direct safety substitute for high-end branded spacers intended for heavy track or race use
Verdict: A budget-friendly forged aluminum 1-inch spacer that gives the Infiniti FX35 improved stance and clearance when installed and torqued carefully, but not intended for heavy track duty.
Choosing the Right Infiniti FX35 Wheel Spacers: Key Factors to Consider
Bolt Pattern and Fitment
Bolt pattern and stud pattern are the first things to confirm because they determine whether a spacer will physically mount to your vehicle. Choosing a spacer with the exact FX35 lug pattern ensures the studs or bolts align properly and that the wheel studs receive sufficient engagement.
Incorrect fitment can cause uneven load transfer, excessive stud stress, or inability to torque fasteners to specification. Always verify the stud type and mounting orientation so the spacer seats flush against the hub and the wheel sits correctly on the spacer face.
Hub-Centric Vs Lug-Centric Design
Hub-centric spacers center on the vehicle hub and transfer load through the hub flange, which typically reduces runout and the chance of vibration. Lug-centric designs rely on the lug nuts to center the wheel and can be more prone to slight misalignment if tolerances vary.
For the FX35, prioritizing a hub-centric spacer that matches the hub bore diameter helps keep the wheel concentric to the hub. If you must use lug-centric spacers, ensure very tight manufacturing tolerances and thorough balancing after installation to minimize vibration.
Spacer Thickness and Intended Use
Thickness affects track width, clearance, and wheel offset. Small increases can correct minor clearance issues or change stance subtly, while larger thicknesses push wheels outward for a more aggressive look but increase leverage on hub bearings and studs.
Consider the intended use: moderate thicknesses often solve fitment problems with minimal added stress, while very thick spacers are better for purely aesthetic stance but require careful assessment of bearing loads and suspension geometry. Use a thickness guide to balance the look versus mechanical impact.
Material and Manufacturing Quality
Spacers are typically made from aluminum alloys or steel. High-quality, billet-machined aluminum with proper anodizing can offer strength with reduced weight, while steel options may provide different durability characteristics.
Look for precision machining, full-face contact surfaces, and corrosion-resistant finishes. Poorly manufactured spacers can introduce runout, crack under load, or allow water and salt to corrode mounting surfaces, so build quality directly affects long-term safety and reliability.
Fasteners and Torque Specifications
Fasteners must be rated and sized for the increased leverage that spacers introduce. Correct torque specs and proper fastener length are essential to maintain clamping force without over-stressing studs.
Verify that the spacer design includes clear torque guidance and compatible lug nut or bolt lengths. If an installation kit is required, ensure it contains hardware rated to vehicle specifications. Following recommended torque specs and rechecking torque after initial use reduces the risk of loosening or component damage.
Wheel Balance and Vibration Risk
Any spacer changes wheel position and can affect balance and vibration characteristics. Minor mismatches or runout can become more pronounced once a spacer is added, especially with lug-centric designs or low-quality machining.
After installation, wheels often need rebalancing. Pay attention to signs of vibration at different speeds and inspect hub and spacer mating surfaces for unevenness. Choosing hub-centric spacers and verifying concentric fit reduces the likelihood of vibration and improves ride quality.
How We Chose the Best Infiniti FX35 Wheel Spacers
To build this list we applied vehicle-specific fitment and safety-focused criteria to identify wheel spacers suitable for the Infiniti FX35. Key evaluation points included bolt pattern and hub-centric fit, material and manufacturing quality, thickness range and intended use, fastener retention and torque compatibility, and whether installation hardware or an installation kit was available.We favored spacers that matched the FX35 bolt pattern and provided hub-centric contact to minimize runout risk. Materials and manufacturing tolerances were judged by suggested construction methods and finish to resist corrosion. Thickness options were considered for stance versus clearance needs, while fastener design and documented torque specs were examined to ensure safe clamping force. Products lacking clear hub-centric design or without appropriate hardware recommendations were excluded. We also excluded spacers intended only for other vehicles or with unclear fit data. The result is a focused shortlist that balances safe fitment, durability, and practical installation needs for the FX35.
Our full evaluation process is outlined in our review methodology.
FAQ
Are wheel spacers safe for an Infiniti FX35?
Wheel spacers can be safe when they match the FX35 bolt pattern, use hub-centric design where possible, and are installed with proper torque and hardware. Safety depends on correct fitment, material quality, and adherence to torque and maintenance guidance. Regular inspections after installation help catch issues early.
How thick can wheel spacers be before causing problems?
Thickness affects leverage on bearings and studs, so thicker spacers increase mechanical loads. Moderate thicknesses that resolve clearance or slight offset issues usually pose limited risk, while very large spacers may accelerate bearing wear or affect steering geometry. Consider the tradeoffs and consult a thickness guide for recommended ranges.
Do wheel spacers cause vibration on the FX35?
Spacers themselves do not inherently cause vibration, but poor machining, lug-centric designs, or incorrect hub fit can create runout that leads to vibration. Choosing hub-centric spacers, ensuring precise fit, and rebalancing wheels after installation reduces the likelihood of vibration.
Do I need an installation kit or special hardware?
Many spacers require longer studs or specific lug nuts to maintain proper thread engagement. An installation kit that includes rated hardware simplifies the process and ensures correct fastener length. Always confirm the spacer's hardware requirements and use torque specs appropriate for the FX35.
How often should I recheck torque after installing spacers?
Rechecking torque is recommended after the first 50 to 100 miles of driving and again periodically thereafter. New installations can settle, and fasteners may require retorqueing. Regular inspections of spacer and wheel mating surfaces help ensure continued safe clamping.
Conclusion
Choosing the right wheel spacer for an Infiniti FX35 means balancing fitment, hub engagement, and the mechanical tradeoffs of added leverage. Prioritize hub-centric designs that match the FX35 bolt pattern, adequate material and machining quality, and clear fastener and torque guidance.Think about the intended use—small spacers for clearance versus larger spacers for stance—and plan for wheel balancing and periodic inspection. Following these priorities will help you achieve the desired look or clearance while minimizing vibration and wear risks.
Explore More:
- Check out all Infiniti FX35 parts & accessories
- Explore Wheel Spacers Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
