Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Selecting the right wheel hub assembly for your Infiniti QX60 matters for safety, steering stability, and road noise. A properly matched hub keeps the wheel centered, ensures smooth bearing operation, and can prevent vibration or ABS faults that affect drivability. This guide presents seven shortlisted wheel hub assemblies chosen for their fit and expected longevity. We evaluated candidates on bearing precision and construction quality, plus how they affect vehicle handling and noise. Read on to see which features and specs to prioritize before installation.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | FKG 512388 Rear Wheel Bearing Hub Assembly, 5-Lug |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Front Wheel Hub Bearing Assembly for Infiniti QX60 / JX35 (5‑lug) |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Rear Wheel Hub and Bearing Assembly, 2‑pc (with ABS) |  |
| Best Budget The cheapest option that still gets the job done reliably | KUSATEC Rear Wheel Bearing and Hub Assembly 512388 (w/ ABS) |  |
| Most Sold A high-volume bestseller chosen again and again | KUSATEC Front Wheel Hub and Bearing Assembly (2-Pack) |  |
| Best Value for Money The sweet spot between price and what you get | Aspligo Front Wheel Hub Bearing Assembly, 2-Pack (513296) |  |
| Best Overall The best all-around choice for most situations | KNOLET Pair Rear Wheel Bearing Hub Assembly (512388) with ABS Sensor |  |
1. FKG 512388 Rear Wheel Bearing Hub Assembly, 5-Lug
| Bearing Number | 512388 |
|---|---|
| Bearing Type | Ball Bearing |
| Specification Met | ISO 16949 |
| Voltage | 12 Volts |
This FKG 512388 rear hub assembly is a direct-fit replacement intended for the rear position on select Infiniti QX60 (except 4WD) models. It arrives as a complete hub with integrated ball bearing and five-lug pattern so installation replaces the worn assembly without pressing out a separate bearing. The part is built to ISO/TS 16949 standards and ships pre-greased, which helps reduce prep work and gets the vehicle back on the road faster. For a reliability-focused buyer the practical benefits are straightforward: it addresses hub noise and vibration, restores proper wheel mounting, and reduces the chance of premature failure compared with reusing a worn bearing. Expect typical use as a like-for-like repair during routine wheel bearing replacement or when diagnosing a rear humming or grinding noise. Limitations are that longevity still depends on installation quality and driving conditions, and this aftermarket option may not match the exact materials or testing regimen of some factory-sourced parts.
Best for: Reliability-focused owners seeking a dependable, direct-fit rear hub replacement for an Infiniti QX60 who prioritize restoring quiet, stable rear-wheel operation with minimal installation complexity.
Less Ideal for: Drivers who want an exact factory-sourced part backed by manufacturer-specific testing or those who prefer professional shop-only replacements with OEM part numbers directly from the dealer.
- Direct-fit rear hub assembly for compatible Infiniti QX60 models, simplifying replacement
- Integrated ball bearing and five-lug hub eliminates separate bearing press work
- Manufactured to ISO/TS 16949 standards indicating factory-quality production controls
- Pre-greased bearing reduces installation prep and initial break-in wear
- Aftermarket part that may differ from factory-sourced components in materials or validation
- Performance and service life depend heavily on correct installation and vehicle conditions
Verdict A practical, ISO-certified direct-fit rear hub assembly that restores rear-wheel stability and quietness on the Infiniti QX60 without needing a separate bearing press.
2. Detroit Axle Front Wheel Hub Bearing Assembly for Infiniti QX60 / JX35 (5‑lug)
| Position | Front Left or Right |
|---|---|
| Lugs | 5 Bolts |
| ABS Type | Encoder |
| Flange Type | 4‑Bolt Square |
This Detroit Axle front wheel hub bearing assembly is sold as a complete front hub for Infiniti QX60/JX35 models and installs in place of the factory unit to restore wheel support and ABS sensor function. It is typically used when a worn bearing produces noise, vibration, or excessive wheel play; replacing the entire hub simplifies the job compared with pressing a separate bearing. The part ships with a 5‑bolt flange and encoder‑style ABS provision so the vehicle's wheel speed sensing remains intact. Customers report the hubs reduce noise and return solid wheel fitment when installed correctly, and the part is fatigue tested for durability. Expect a straightforward swap for a convenience‑minded DIYer or a quick job for a shop, though careful handling of the ABS connector and correct torqueing are important. Some buyers note packaging can leave the sensor area exposed during transit and there have been occasional fitment mismatches on other vehicle models, so confirm alignment and wheel stud length before installation on the QX60.
Best for: Convenience‑driven buyers who want a ready‑to‑install replacement that gets a QX60 back on the road quickly with minimal shop time.
Less Ideal for: Buyers seeking a direct dealer replacement with guaranteed factory packaging or those who prefer to have individual bearings pressed rather than replacing the entire hub.
- Complete hub assembly replaces bearing and hub in one unit for faster installation
- Built with encoder ABS provision to maintain wheel speed sensor function
- Designed and tested to resist impact and fatigue for long service life
- Reported to quiet noise and restore solid wheel fitment on compatible QX60 vehicles
- Packaging has been reported as insufficiently protective for the ABS connector during shipping
- One review history shows occasional fitment variability on non‑QX60 vehicles, so double‑check fit before final installation
Verdict A practical, ready‑to‑install hub assembly for Infiniti QX60 owners who prioritize convenience and a fast repair, but check the ABS connector and fitment on arrival.
3. Detroit Axle Rear Wheel Hub and Bearing Assembly, 2‑pc (with ABS)
| Position | Rear Left and Right |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Bearing Type | Roller Bearing |
| Specification Met | ISO 16949 |
This Detroit Axle kit supplies two rear wheel hub and bearing assemblies intended as direct replacements for the vehicle listed. Each assembly integrates the bearing and ABS encoder so installation replaces the complete hub rather than pressing in a separate bearing. In use it restores wheel support and corrects bearing noise, vibration, or ABS sensor issues caused by a worn hub. The listing highlights impact, wear, and fatigue testing and the parts meet ISO 16949, which suggests manufacturing controls aimed at durability. Buyers report straightforward fitment when the correct year/application is selected and the assemblies save time versus rebuilding a hub. Limitations to consider are variability in long-term life across heavy-duty or high-mileage use and occasional reports of cosmetic rust or returns; technicians may still need to address stubborn rusted fasteners during installation. These are a practical, performance-minded replacement when you want a ready-to-install hub with an integrated ABS encoder for the Infiniti QX60 named in the article goal.
Best for: Performance-oriented buyers who prioritize restoring precise wheel support and ABS function quickly on an Infiniti QX60, and prefer a ready-to-install, factory-replacement style part that gets the car back to driving condition.
Less Ideal for: Owners seeking the highest-mileage, factory-original longevity for intensive towing or continuous heavy loads should consider higher-end factory-quality options or dealer-sourced parts instead.
- Complete hub-and-bearing assembly replaces the unit in one install, saving time versus separate bearing service
- Built-in ABS encoder ring avoids separate sensor transfer and helps maintain ABS function
- Meets ISO 16949 quality specification indicating controlled manufacturing processes
- Sold as a two-piece kit so both rear hubs can be replaced together for matched performance
- May show cosmetic rust or signs of prior returns in some units, per user reports
- Long-term durability can vary under high-mileage or heavy towing conditions compared with premium OE-level parts
Verdict A convenient, performance-focused replacement that restores rear hub and ABS function on the Infiniti QX60 with a ready-to-install hub-and-bearing assembly.
4. KUSATEC Rear Wheel Bearing and Hub Assembly 512388 (w/ ABS)
| Part number | 512388 |
|---|---|
| Position | Rear |
| Flange bolt holes | 4 |
| Compatible models | Infiniti QX60 (2014-2019), Infiniti JX35 (2013) |
This KUSATEC 512388 rear wheel bearing and hub assembly replaces a worn hub on compatible Infiniti QX60 JX35 and a range of Nissan/Mitsubishi rear applications. It arrives as a complete hub and bearing unit with the flange and ABS interface ready to bolt in, so installation is straightforward for a professional or experienced DIYer removing the old assembly. Notable features called out by the maker include protective coating on the hub bolts to resist rust, a sealed bearing design intended to reduce noise and vibration, and factory-quality inspection claims. In practice this unit gives the expected functional benefits of a direct replacement: it restores smooth wheel rotation, clears bearing noise, and preserves ABS signal functionality. Expectations should be tempered on longevity versus higher-end or OEM replacements since some users report early failure while many others report quiet operation and accurate fit. For budget repairs this hub delivers competent fit and function but may not match the long-term durability of premium aftermarket or factory parts.
Best for: A budget-conscious buyer who needs a functional rear hub replacement for an Infiniti QX60 and prioritizes low upfront cost and straightforward installation.
Less Ideal for: Buyers who prioritize maximum long-term durability or want a factory-branded replacement should consider higher-tier or OEM-sourced hubs instead.
- Sold as a complete hub and bearing assembly for easier installation
- Includes ABS sensor interface so vehicle systems remain functional
- Protective coating on hub bolts helps resist rust and corrosion
- Sealed bearing design aimed to reduce noise and vibration during operation
- Durability varies across user reports and may be shorter than higher-end alternatives
- Not a branded factory replacement so fitment can depend on correct part selection
Verdict A cost-focused, ready-to-install rear hub assembly that restores function and ABS operation for QX60 owners but may not match OEM longevity.
5. KUSATEC Front Wheel Hub and Bearing Assembly (2-Pack)
| Position | Front |
|---|---|
| Part Number | 513296 |
| Flange Bolt Holes | 4 |
| Flange Bolt Thread | M12X1.5 |
| Lug Pattern | 5 Lug Bolts |
This KUSATEC two-pack supplies front wheel hub and bearing assemblies intended as direct replacements for the factory front hubs. It installs at the front position and includes the flange bolt pattern and thread sizing to match the listed part number, so it is used when a worn or noisy hub or a failing wheel bearing needs replacement. Notable features called out by the manufacturer include protective coating on hub bolts to resist corrosion and a seal design aimed at reducing noise and vibration. For a risk-averse buyer the unit is attractive because many owners report straightforward installation and quiet operation after fitting, and the two-pack covers both sides for a paired replacement. Limitations to consider are inconsistent warranty information on the sales page and a handful of mixed reviews reporting premature failure, so buyers should inspect parts on receipt and consider professional installation and a post-installation check of ABS sensor function. This part is best treated as an affordable factory-quality replacement with the usual caution of validating fit and longevity after installation.
Best for: Risk-averse mainstream buyers who prioritize replacing worn front hubs with a complete, ready-to-install pair and prefer a product that many owners have used successfully.
Less Ideal for: Buyers seeking premium, long-term-lifetime hub assemblies backed by explicit manufacturer warranty coverage or those who prefer an OEM-branded part with documented guarantee.
- Sold as a two-pack so both front hubs can be replaced at once
- Protective coating on hub bolts to reduce corrosion and ease wheel nut tightening
- Seal design intended to minimize noise and vibration after installation
- Many customers report easy fit and correct ABS sensor operation after installation
- No clear seller warranty information provided on the product page
- Several isolated reviews report premature failures, indicating variable long-term durability
Verdict A budget-friendly two-pack front hub assembly that fits the listed vehicles and often installs and runs quietly, but verify warranty coverage and inspect parts due to mixed durability reports.
6. Aspligo Front Wheel Hub Bearing Assembly, 2-Pack (513296)
| Brand | Aspligo |
|---|---|
| Item model number | 513296 |
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| ABS sensor | Yes |
These Aspligo front hub assemblies are sold as a two-pack and are intended to replace the factory front hubs on applicable Infiniti QX60 years. Each assembly arrives preassembled with the bearing sealed and an integrated ABS tone ring so you do not need to repack bearings or transfer sensors. Typical use is a direct replacement when a worn or noisy front hub needs swapping; installation is bolt-on and the listing notes no bearing clearance adjustment is required, which speeds up a standard hub swap. The product emphasizes improved sealing, reduced noise, and higher load capacity compared with worn originals. Practical benefits include receiving both left and right hubs together and compatibility with the vehicle's ABS system. Limitations to consider are mixed user reports about packaging and isolated serious failures with lug studs reported by a small number of buyers, so inspect hardware on arrival and torque to spec during installation. This is a budget-conscious aftermarket option for replacing worn front hubs on the QX60 but verify fitment before installing.
Best for: Practical optimizers looking to lower repair cost while getting both front hubs at once and who prioritize straightforward, faster installations over paying for dealer parts.
Less Ideal for: Buyers who need guaranteed dealer-level reliability for high-mileage or heavy-duty use should consider higher-end or OEM-sourced replacements instead.
- Sold as a two-piece set for both front hubs so you can replace both sides at once.
- Preassembled sealed bearings with integrated ABS tone ring for straightforward bolt-on installation.
- Manufacturer states improved sealing and higher load capacity to reduce noise and extend service life.
- Some customers reported poor packaging that can damage studs during transit.
- A small number of reports describe catastrophic stud failures after limited use, indicating potential quality variance.
Verdict A cost-effective two-pack hub assembly that simplifies front-hub replacement on the QX60, but inspect hardware on arrival and be aware of a small number of quality complaints.
7. KNOLET Pair Rear Wheel Bearing Hub Assembly (512388) with ABS Sensor
| Bearing Type | Ball Bearing |
|---|---|
| Compatible Lubricant | Grease |
| Position | Rear Left and Right Axle |
| ABS Sensor Included | Yes |
| Material | Carbon Steel |
These KNOLET hub assemblies replace the rear wheel hubs and integrated bearings and include the ABS sensor required for modern traction and stability systems. They are sold as a pair and are built from forged carbon steel with protective coatings and seals to resist moisture and contamination. In practice they install like a factory replacement: bolt the hub in place, connect the ABS wiring, torque fasteners to spec, and the assembly restores quiet rolling, eliminates rumble and corrects ABS/traction faults caused by worn bearings. Buyers report the fit and electrical connections match the factory units, and the sealed bearing design reduces maintenance and noise. Limitations are typical of aftermarket hubs: removing corroded original hubs can be time consuming and some installs demand impact tools or heat to free stuck parts, and long-term durability compared with high-end OE suppliers is still based on real-world use rather than extended manufacturer history. For QX60 owners this is a budget-friendly, all-in-one replacement that simplifies rear hub repairs while maintaining ABS functionality.
Best for: Balanced owners who want a complete, economical rear hub replacement that restores ABS function and reduces road noise without overpaying for branded OEM parts.
Less Ideal for: Owners seeking OE-branded or long-proven dealer parts for high-mileage restoration projects or those who prefer professional installation-only solutions should consider factory-sourced alternatives.
- Includes ABS sensor so traction and ABS systems remain functional after replacement
- Sealed bearing and protective coating help reduce noise and resist moisture intrusion
- Machined to match factory mounting points for direct fit and straightforward installation
- Sold as a pair which simplifies replacing both sides at once
- Some installations require heavy tools, heat, or penetrating spray to remove corroded original hubs
- Long-term lifespan versus established OEM suppliers depends on real-world time in service
Verdict A practical, budget-friendly rear hub assembly pair for the QX60 that restores ABS operation and eliminates bearing noise while matching factory fitment.
Choosing the Right Infiniti QX60 Wheel Hub Assembly: Key Factors to Consider
Fitment and Mounting Accuracy
Correct fitment is the most important factor because the hub must match the Infiniti QX60's bolt pattern, flange thickness, and mounting face offset. Even small deviations in these dimensions can cause wheel runout, uneven tire wear, or stress on suspension components.
Confirm that the hub assembly lists explicit compatibility with the QX60 and provides mounting dimension data. Accurate mounting reduces the need for shims or modifications, which helps preserve factory alignment settings and steering geometry. Properly matched hubs also simplify installation and reduce the risk of fastener loosening over time.
Bearing Precision and Sealing
The bearing inside the hub controls smooth rotation and longevity, so inspect bearing tolerances, preload design, and sealing. Bearings with tight manufacturing tolerances exhibit less play and lower friction, which improves steering feel and fuel efficiency.
Effective seals keep contaminants and moisture out, preventing premature wear and corrosion. Look for assemblies that specify bearing material, load ratings, and sealing method, since these affect operating life under different road and weather conditions.
ABS Sensor and Tone Ring Compatibility
Many Infiniti QX60 models use wheel speed sensors that rely on a tone ring integrated into or paired with the hub. Compatibility with the vehicle's ABS sensor is essential to avoid error codes and ensure proper braking and stability control function.
Verify whether the hub includes a tone ring or is designed to work with the existing sensor location. Mismatched tone ring spacing or missing features can trigger warning lights and may require sensor recalibration or replacement, increasing install complexity.
Material Quality and Corrosion Resistance
Hubs operate in harsh environments and must resist corrosion to maintain mounting surfaces and fastener threads. Materials and protective finishes affect long-term durability, especially in areas that see road salt or moisture.
Look for hubs made from appropriately rated steel or alloy with coatings that prevent rust on the flange and mounting face. Good material quality also reduces the risk of stress cracking or fatigue under repeated loading from potholes or heavy braking.
Torque Specifications and Fastener Design
Correct torque on hub fasteners ensures even clamp load and prevents premature bearing wear or loosening. The hub and wheel studs should be designed to accept the factory torque values for the Infiniti QX60 without thread damage.
Check whether the assembly documentation provides torque specs or whether the hub retains the factory stud pattern and thread engagement. Proper fastener design and accessible torque instructions reduce the chance of installation errors and align with safe maintenance practices.
Serviceability and Installation Complexity
Consider how easy the hub is to install and service, whether you plan to do the work yourself or have it done professionally. Some assemblies are direct bolt-on replacements that include studs and seals, while others may require transferring sensors or pressing bearings.
Lower-complexity installs save time and reduce the need for specialized tools, but confirm that the unit does not omit necessary components. Also factor in whether the hub allows for future bearing inspection or replacement without major disassembly.
FAQ
How do I know if my Infiniti QX60 needs a wheel hub assembly replacement?
Common signs include persistent grinding or growling from a wheel area, noticeable vibration at speed, or an illuminated ABS or traction control warning. Excessive play when the wheel is rocked while lifted can also indicate bearing wear. If you notice any of these symptoms, inspect the hub area and consider professional diagnosis.
Can I replace a wheel hub assembly on an Infiniti QX60 myself?
Many mechanically inclined owners can perform a hub replacement with the right tools and service manual. The job usually involves removing the wheel, brake components, and axle nut, then unbolting the hub. However, tasks like correctly torquing fasteners, ensuring ABS sensor alignment, and setting bearing preload can require experience or specific tools, so evaluate your skill level honestly.
Should I replace the front and rear hubs at the same time on my QX60?
It depends on condition and mileage. Hubs do not always wear evenly, so replacing only the worn hub is common. However, if one hub has failed due to age or contamination, inspecting the opposite side is prudent. Replacing both at once can be convenient to ensure consistent performance and reduce future labor.
What role does the hub play in ABS and stability control systems?
The hub often includes or interfaces with a tone ring that provides wheel speed information to ABS and stability control modules. If the tone ring is damaged or misaligned, those systems may receive incorrect signals and trigger warnings or altered braking behavior. Ensuring tone ring and sensor compatibility preserves proper system function.
How long does a wheel hub assembly typically last on an Infiniti QX60?
Lifespan varies with driving conditions, load, and maintenance, but wheel hub assemblies often last many tens of thousands of miles under normal use. Exposure to water, road salt, or heavy loads can shorten service life. Regular inspection for play, noise, or corrosion helps identify wear before failure.
Will a noisy hub always show a diagnostic trouble code?
Not necessarily. Mechanical noise from a worn bearing can occur before sensors detect an electrical fault. ABS or traction control codes may appear if the tone ring or sensor signal is affected, but grinding or rumbling can be present without any codes. Listen for changes during cornering and straight-line driving to help pinpoint the source.
How We Chose the Best Infiniti QX60 Wheel Hub Assembly
We focused on fitment and bearing performance specific to the Infiniti QX60 to build this list. Key evaluation criteria included bearing tolerance and preload consistency, hub flange integrity and bolt pattern accuracy, ABS sensor integration or compatibility, corrosion-resistant finishes and materials, and overall manufacturing tolerances that influence vibration and longevity. We also considered ease of installation in typical DIY and professional settings by checking mounting interfaces and whether the assemblies require additional parts like hub bolts or sensors. We excluded units that lacked clear fitment data for the Infiniti QX60, hubs without validated bearing life specifications, and assemblies with inconsistent ABS or tone-ring compatibility. The final shortlist favors products that align with the vehicle's factory mounting geometry, maintain recommended bearing preload ranges, and promise consistent rotational runout and seal effectiveness.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a wheel hub assembly for an Infiniti QX60, prioritize correct fitment, bearing precision, and ABS tone-ring compatibility. These factors most directly affect ride quality, braking system performance, and long-term reliability. Balance ease of installation and material quality against serviceability. Address symptoms like noise or wheel play promptly to avoid secondary damage and maintain safe vehicle handling.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
