Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive an Infiniti QX60, the right suspension kit can meaningfully change how the vehicle rides, handles corners, and responds to road imperfections. Choosing the correct kit matters because the wrong components can degrade comfort, introduce noise, or affect alignment and tire wear. This guide highlights the top shortlisted suspension kits for the Infiniti QX60 and explains the practical tradeoffs we considered, including fitment, ride quality, and durability. Read on to see which options matched our criteria and why they earned a spot on the list.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
1. Detroit Axle Front 10‑Piece Suspension Kit for Infiniti QX56/QX80 and Nissan Armada/Titan
| Fitment note | Lists Infiniti QX56 and QX80 among compatible models |
|---|---|
| Kit contents | 2 upper control arms with ball joints, 4 tie rod pieces, 2 sway bar links, 2 boots |
| Position | Front Upper |
| Manufacturer | Detroit Axle |
This Detroit Axle 10-piece front suspension kit groups the common wear items you replace during a front-end overhaul into one package. It supplies two upper control arms with ball joints, four tie rod pieces, two sway bar links, and two protective boots so you can service both sides of the front suspension in one job. The parts are described as factory-quality aftermarket components and Detroit Axle reports durability testing; buyers in practice report solid fit and straightforward installation for vehicles they match to. The kit is useful for a reliability-minded owner who wants to refresh steering and control interfaces that cause play, vibration, or uneven tire wear. Potential downsides are the usual variability of kit shipments and occasional wrong-fit parts reported by some customers, so double-check part numbers before installation and be prepared to handle a warranty or return if a mismatched piece arrives. For a coordinated front-end refresh this kit simplifies ordering and can save time over sourcing parts individually.
Best for: A reliability-focused buyer who prefers doing a thorough front-end service at once and values consolidating compatible replacement parts to restore factory steering feel and reduce future failures.
Less Ideal for: Buyers who need guaranteed correct single-component replacements or who prefer OEM direct-source parts for dealer-level exactness should consider individual parts or dealer options instead.
- Includes common front-end components in one package so you can replace both sides in a single job
- Manufacturer states parts undergo impact, wear and fatigue testing for durability
- Multiple reviews report accurate fit and heavy‑duty construction
- Saves time compared with buying individual parts separately
- Some buyers have received incorrect or mismatched parts in kits requiring returns or replacements
- Individual items like sway links or ball joints may wear sooner than expected on high‑mileage vehicles
Verdict A convenient, reliability-oriented front suspension bundle that simplifies a coordinated replacement but check fitment closely since kit packaging can sometimes include wrong parts.
2. Detroit Axle Rear Suspension Kit—Rear Lower Control Arms with Ball Joints and Sway Bar End Links
| Manufacturer | Detroit Axle |
|---|---|
| Model | Control Arms Kit |
| Position | Rear Lower |
| Includes | 2 Rear Lower Forward Control Arms with Ball Joint, 2 Rear Stabilizer/Sway Bar End Links |
This Detroit Axle kit supplies the rear lower control arms with ball joints plus two sway bar end links intended as a direct replacement for compatible vehicles. It is typically used to restore rear suspension geometry and reduce play or clunking from worn joints. The control arms arrive with ball joints installed and the parts are tested for impact and fatigue, which translates to a ready-to-install repair for a shop or experienced DIYer. Practical benefits include having both control arms and end links in one package so you can replace multiple wear items at once and simplify alignment work afterward. Reported limitations include occasional mismatch with vehicle-specific end link sizes and some users needing to reuse original fasteners or skip the supplied links if they do not fit; greased fittings on lower joints may also differ from sealed modern parts. Plan for wheel alignment after installation and verify supplied hardware before starting the job.
Best for: A convenience-driven buyer who wants a consolidated rear-lower suspension repair that minimizes parts sourcing and speeds up a shop or DIY replacement process.
Less Ideal for: Drivers seeking fully sealed, maintenance-free joints or a kit guaranteed to include every vehicle-specific fastener should consider vehicle-specific OEM-style assemblies or confirm hardware before purchasing.
- Complete rear-lower kit bundles control arms and sway bar end links for one-stop replacement
- Ball joints come preinstalled to reduce prep time during installation
- Designed and tested for impact, wear, and fatigue for durability under normal driving
- Fits factory rear-lower position and restores suspension control when worn parts are replaced
- Sway bar end links in the kit may not match every vehicle variant and sometimes must be reused from the original car
- Some fasteners shown may not be included, requiring reuse of existing hardware
- Lower ball joints use grease fittings rather than sealed joints, requiring occasional greasing
Verdict A convenient bundled rear-lower suspension kit that speeds replacement for Infiniti QX56/QX60-era rear suspension but check supplied end links and fasteners for exact fit before installation.
3. TUCAREST 10‑Piece Front Suspension Control Arm and Tie Rod Kit for 2013–2020 Nissan Pathfinder / 2014–2020 Infiniti QX60
| Fitment | 2013–2020 Nissan Pathfinder; 2014–2020 Infiniti QX60 |
|---|---|
| Kit contents | 2 lower control arms w/ ball joints, 2 inner tie rod ends, 2 outer tie rod ends, 2 sway bar end links, 2 rack boots |
| Material | Alloy steel and aluminum |
| Position | Front |
This TUCAREST kit bundles the main front suspension components you typically replace when restoring steering feel and firming up handling on a QX60: two lower control arms with ball joints, inner and outer tie rod ends, sway bar end links and rack boots. It is designed as a vehicle-specific replacement set intended for front‑end suspension refresh during a comprehensive repair or upgrade. The parts are machined alloy steel and aluminum and are claimed to follow factory-spec production with multiple quality checks during manufacturing. For a performance-oriented buyer this kit simplifies sourcing by grouping matching components and cuts installation time compared with buying pieces separately. Expect improved steering response and reduced play after installation plus the convenience of a matched set for alignment. Keep in mind this is a full mechanical replacement kit without upgraded performance bushings or adjustable geometry, so drivers looking for track-level tuning or thicker-duty motorsport components will need aftermarket performance parts instead.
Best for: Performance-oriented owners who want a matched, vehicle-specific front suspension refresh to restore steering precision and handling balance on an Infiniti QX60.
Less Ideal for: Drivers seeking race-spec adjustable control arms, polyurethane bushing upgrades, or heavy-duty competition parts should look at dedicated performance suspension components instead.
- Includes all primary front suspension components needed for a full lower-end refresh on the QX60, reducing parts sourcing hassle.
- Vehicle-specific fitment for 2013–2020 Pathfinder and 2014–2020 QX60 improves chances of correct fit and faster installation.
- Machined alloy steel and aluminum construction aims to match factory-spec durability and fit.
- Bundled parts help restore steering precision and reduce play when replaced together and followed by alignment.
- Does not include upgraded performance bushings or adjustable arms for alignment tuning.
- Kit is focused on mechanical replacement and not designed as a heavy-duty or track-oriented performance upgrade.
Verdict A convenient, factory-spec replacement bundle that restores front-end feel on the QX60 but is not a track-grade performance overhaul.
4. Aeagle Front Upper Control Arm and Suspension Kit with Tie Rods and Ball Joints
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Upper |
| Material | Alloy Steel, Iron |
| Special Features | Pre-greased |
This Aeagle kit bundles two front upper control arms with preinstalled ball joints plus outer and inner tie rod ends, sway bar end links, and lower ball joints so you can refresh most front suspension connection points at once. It is intended for vehicle-specific fitment and is typically used when worn bushings or ball joints cause clunking, uneven tire wear, or loose steering. Components use alloy steel and iron with an electrophoretic coating and arrive pre-greased, which reduces initial installation prep. The practical benefit is a coordinated replacement package that saves time versus buying parts individually and helps restore steering feel and front-end stability. Limitations are that this is a budget aftermarket kit rather than a factory-quality assembly and long-term durability may vary depending on driving conditions and installation quality. Also the kit targets front suspension items only, so other related wear parts like shocks or alignment are separate expenses.
Best for: Budget-conscious buyers who prioritize replacing multiple worn front suspension parts at once to restore steering response and eliminate noise without paying for premium brand components.
Less Ideal for: Owners seeking long-term, high-mileage durability or exact factory-spec replacements should consider higher-end or OEM-equivalent parts instead.
- Comprehensive kit covers major front suspension pieces so you can replace multiple worn parts in one job.
- Pre-greased components reduce initial installation work and help with smoother startup operation.
- Vehicle-specific fitment aims to simplify installation and improve compatibility.
- Electrophoretic coating and alloy steel construction offer corrosion resistance and basic durability.
- Aftermarket construction may not match longevity of higher-end factory-quality parts.
- Kit only addresses front control arms and steering linkages and does not include related components like shocks or alignment hardware.
Verdict A cost-focused, all-in-one front suspension kit that makes replacing multiple steering and control-arm components quick and affordable, but it is a budget aftermarket alternative rather than a premium factory-quality solution.
5. TRQ Front Steering & Suspension 10-Piece Kit (front)
| Brand | TRQ |
|---|---|
| Fit Type | Vehicle Specific Fit |
| Auto Part Position | Front |
| Material | Alloy Steel |
This TRQ kit bundles the main front steering and suspension components you would replace when refreshing an Infiniti QX60 front end. It includes tie rods, lower and upper control arms with ball joints, and sway bar links designed for direct-fit installation so no modifications are needed. Parts arrive pre-greased where specified and feature anti-corrosion coating and machined exterior surfaces intended to extend service life and ease installation. For a risk-averse buyer the kit simplifies sourcing all major front components in one package and TRQ provides extensive DIY videos to guide the install. Practical benefits include restored steering feel and reduced front-end noise when worn parts are replaced, plus fewer separate orders to manage. Limitations to note are mixed long-term durability reports from other vehicle owners and the kit covers front steering/suspension only, so additional components like struts or wheel hub parts are not included. Confirm compatibility with your specific QX60 year and trim before purchase.
Best for: A risk-averse mainstream buyer who wants a factory-replacement style, all-in-one front steering and suspension solution for routine restoration and improved ride confidence.
Less Ideal for: Drivers seeking a complete suspension overhaul including shocks or performance upgrades, or those who prefer OEM dealer service for parts and warranty handling.
- Comprehensive package includes tie rods, upper and lower control arms with ball joints, and sway bar links for one-stop front-end repair.
- Vehicle-specific direct-fit design reduces the need for modifications during installation.
- Anti-corrosion coating and machined exterior intended to extend part life and improve fit.
- Pre-greased components where indicated and extensive DIY videos simplify installation for home mechanics.
- Does not include struts, shocks, wheel bearings, or other suspension hardware outside the front steering components.
- Some user reports indicate variable long-term durability on different vehicle applications.
- Fitment must be double-checked for exact QX60 model year and options before ordering.
Verdict A convenient, vehicle-specific front steering and suspension kit that simplifies restoring Infiniti QX60 front-end handling but verify fitment and accept variable long-term results.
6. TRQ Front Steering & Suspension 8-Piece Kit (fit for Infiniti QX60)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Lower |
| Unit Count | 1.0 Count |
| Model | TRQ PSA64908 8 Piece Steering & Suspension Kit |
This TRQ front steering and suspension kit bundles the common front wear items—inner and outer tie rods, lower control arms with ball joints, and sway bar links—into one vehicle-specific package for the Infiniti QX60. Designed as direct-fit replacements, the parts arrive pre-greased and anti-corrosion coated to simplify installation and reduce prep work. For a practical DIYer or independent shop, the kit removes the hassle of sourcing each component separately and can quickly restore tight steering and improved road feel after worn parts cause looseness or uneven handling. Users report generally solid fit and finish and noticeable stability gains when the whole front end is refreshed. Limitations to expect are occasional fitment variance on some chassis or 4WD configurations and the absence of zerk fittings for future greasing, so long-term serviceability may require different upkeep. The kit is a value-focused choice that prioritizes ease of installation and a complete repair over premium factory-brand components.
Best for: Practical optimizers who want a cost-effective, all-in-one front suspension refresh for an Infiniti QX60 and prefer completing the job themselves or through a local shop.
Less Ideal for: Buyers seeking factory-brand parts with guaranteed dealer-level fitment or those who need long-term serviceable joints with grease fittings should consider alternatives.
- Complete front kit includes tie rods, lower control arms with ball joints, and sway bar links to avoid multiple orders
- Vehicle-specific design intended for direct fit on Infiniti QX60 to simplify installation
- Pre-greased joints and anti-corrosion coating reduce initial maintenance and improve longevity
- Kitted approach restores handling and steering feel by replacing interacting components together
- Some users have reported occasional fitment interference on specific chassis or axle arrangements
- No service zerk fittings on joints, so future lubrication requires disassembly or aftermarket fittings
Verdict A budget-friendly, complete front steering and suspension kit that simplifies restoring QX60 handling but may need close fit verification for certain chassis variations.
7. Detroit Axle Front 10‑Piece Suspension Kit for INFINITI QX56 / Nissan Titan / Pathfinder / Armada
| Manufacturer | Detroit Axle |
|---|---|
| Position | Front |
| Manufacturer Part Number | 10CS2501369 |
| Compatible Models | INFINITI QX56, Nissan Titan, Pathfinder, Armada |
This Detroit Axle front suspension kit supplies a complete set of front upper and lower control arms with ball joints, inner and outer tie rod ends, and rack boot covers with clamps so you can rebuild the front steering and suspension in one job. For an Infiniti QX60 (note: kit lists compatibility with INFINITI QX56 family), the kit is typically used when worn ball joints, bushings, and tie rod ends cause looseness, uneven tire wear, or a vague steering feel. The parts are ready to install and most users report straightforward fitment and noticeably improved handling and ride quality after replacement. The practical benefits are convenience of a one‑stop kit and replacement of multiple wear items at once, lowering labor time compared with sourcing parts individually. Important limitations: a few customers reported fitment and tolerance issues on certain vehicles that required adjustments or replacement of a specific arm, and some installers noted the long sway bar hardware and potential clearance differences versus factory parts. Expect good short‑term value and improved steering response, but check fitment and inspect mounting clearances during installation.
Best for: Balanced buyers who want a practical, all‑in‑one front suspension refresh to restore steering precision and reduce shop time without sourcing individual parts.
Less Ideal for: If you prioritize a lifetime heavy‑duty upgrade or exact factory reproduction without any fitment checks, this kit may not meet those needs and you should consider specialty or OEM replacement components.
- Complete 10‑piece kit replaces both upper and lower front control arms plus inner and outer tie rod ends and rack boots for a full front rebuild
- Saves time by consolidating multiple wear items into one purchase, reducing shop labor compared with buying parts separately
- Many users report improved steering feel and ride quality after installation
- Manufactured in ISO certified facilities and marketed as meeting factory replacement fit and performance
- Some reports of dimensional/tolerance issues where shocks or brackets interfered with the supplied control arms
- Longevity concerns from a few users who needed replacement ball joints within about a year
- May require minor hardware trimming or adjustment during installation due to long sway bar bolts or fit differences
Verdict A convenient, time‑saving complete front suspension kit that restores steering feel for a practical buyer, but verify fitment and clearances during installation.
Choosing the Right Infiniti QX60 Suspension Kit: Key Factors to Consider
Fitment and Compatibility
Correct fitment is essential because suspension components must align with factory mounting points and clear surrounding parts. A kit designed specifically for the Infiniti QX60 reduces the need for adapters, cutting, or re-drilling, which preserves structural integrity and simplifies installation.
Compatibility also affects alignment specs. If components change suspension geometry, you may need additional alignment adjustments or correction components. Prioritize kits that list exact model years and trim compatibility to avoid surprises and extra work.
Ride Quality and Damping Characteristics
Ride quality depends on spring rates and damper tuning. Softer springs and tuned dampers favor comfort and smooth traversal of bumps, while stiffer setups improve body control at the cost of a firmer ride. Consider your driving conditions and whether daily comfort or performance handling is the priority.
Damping characteristics determine how quickly the vehicle settles after a disturbance, which influences both comfort and control. Look for kits that describe rebound and compression behavior so you can match the kit to your expectations for ride firmness and stability.
Durability and Materials
Suspension parts are exposed to road salt, moisture, and debris, so materials and protective finishes matter. Corrosion-resistant coatings, sealed bearings, and hardened steel components extend service life and maintain performance under stress.
Inspect the specification for spring type, shock body construction, and whether bushings or mounts are reinforced. Durable parts reduce long-term maintenance and the likelihood of performance degradation from wear or rust.
Adjustability and Tuning Options
Adjustable kits let you fine-tune ride height and damping to suit driving preferences or load conditions. Height adjustability helps correct stance, clearance, or leveling issues, while adjustable damping permits balancing comfort against body control.
If you plan to carry heavy loads or occasionally tow, choosing a kit with a useful adjustability range helps maintain proper handling. Understand the adjustment steps and whether tools or additional components are required to make changes.
Installation Complexity and Required Hardware
Some kits are bolt-on replacements while others require special tools, additional brackets, or professional alignment after installation. The complexity affects labor time, potential for installation errors, and overall cost to get the system working properly.
Check whether the kit includes all necessary mounting hardware, instructions, and alignment specs. If the kit changes ride height or geometry, factor in the need for alignment, corner balancing, or additional components to ensure optimal performance.
Intended Use and Performance Goals
Different kits target comfort, towing, off-road capability, or sportier handling. Define your primary use first because that determines acceptable compromises between compliance and control. A kit optimized for sport handling may increase road harshness, while one aimed at improved load capacity may add stiffness under heavy weight.
Consider how often you drive on rough roads, whether you carry passengers or cargo frequently, and if you expect to adjust the suspension later. Matching the kit’s intended purpose to your day-to-day use yields the best long-term satisfaction.
FAQ
How do I know which suspension kit fits my Infiniti QX60?
Start by checking the kit's stated model-year and trim compatibility for the Infiniti QX60. Look for detailed fitment notes that list mounting points and whether any additional parts are required. If fitment details are unclear, consult a qualified installer who can confirm whether the kit aligns with your vehicle’s configuration.
Will changing the suspension affect alignment or tire wear?
Yes, installing a different suspension kit often changes ride height or geometry, which can alter alignment settings. It is common to require a professional alignment after installation to prevent uneven tire wear and to restore proper handling. Some kits may also recommend specific alignment targets or additional components to correct geometry.
Can I install a suspension kit at home, or should I use a shop?
That depends on your mechanical experience and the kit’s complexity. Many bolt-on replacement kits can be installed by a competent DIYer with proper tools and safety equipment. More complex kits that change ride height, require press-in bushings, or need precise torque sequences are better handled by a professional to ensure safety and correct setup.
Does a suspension upgrade kit impact towing or load capacity?
Some kits are designed to improve load handling or reduce sag under towing conditions, while others focus on handling or ride comfort. If you frequently tow or carry heavy loads, choose a kit that specifies improved load capacity or includes stiffer springs and reinforced mounting hardware. Confirm the kit’s stated capability before installation.
How long do suspension components usually last on the Infiniti QX60?
Component life varies based on materials, driving conditions, and maintenance. Under normal driving, well-made springs and dampers can last many years, but exposure to harsh roads, salt, or heavy loads can shorten service life. Regular inspections for leaks, corrosion, and unusual noises help catch issues early and extend longevity.
How We Chose the Best Infiniti QX60 Suspension Kit
We focused on products specifically designed for the Infiniti QX60 and evaluated each option across multiple real-world dimensions. Key criteria included fitment accuracy, which ensures correct alignment points and mounting without modifications; ride quality, assessing how kits balance comfort and control on typical road surfaces; durability and materials, looking for corrosion resistance and robust construction of springs and dampers; and adjustability or tuning range, for drivers who want to dial in ride height or firmness. We also considered ease of installation and availability of mounting hardware, since simpler fitment reduces shop time and potential for errors. Items were excluded if they required extensive vehicle modification, lacked clear fitment details for the QX60, or had consistently poor reports for ride harshness or premature failure. These filters helped us present only practical, well-specified options for this vehicle.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right suspension kit for an Infiniti QX60 means balancing fitment accuracy, ride quality, and durability against your intended use. Prioritize kits that list clear compatibility, match your comfort versus performance goals, and offer the durability needed for your driving conditions. Factor in installation complexity and whether adjustability is important for future tuning or load-carrying needs. Following these priorities will help you select a kit that improves driving experience without introducing avoidable downsides.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Suspension & Steering
- Browse all Auto Parts
