Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
When a headlight assembly on your Infiniti QX60 is damaged or failing, replacing it matters for visibility, safety, and reliable performance. The right assembly restores correct beam pattern and ensures proper alignment so you can drive confidently at night and in poor weather. This guide highlights six top headlight assemblies shortlisted for fit, beam quality, and durability. We evaluated each option against practical criteria like mounting and wiring compatibility, light output, and lens clarity. Read on to find options that suit repair or restoration needs and to understand what to prioritize when choosing a replacement.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | SOCKIR Front Right Headlight Assembly for Infiniti QX60 / JX35 (HID/Xenon, Ballast Included) |  |
| Best Quality Built to a higher standard if you want something more solid | SOCKIR HID/Xenon Headlight Assembly for 2016–2018 Infiniti QX60, Driver Side |  |
| Best Budget The cheapest option that still gets the job done reliably | Partzer Full LED Headlight Assembly for 2019-2020 Infiniti QX60 Right (Passenger) |  |
| Most Sold A high-volume bestseller chosen again and again | AKKON Projector LED Headlight Assembly Pair for 2013 Infiniti JX35 / 2014–2015 QX60 (HID Model) |  |
| Best Value for Money The sweet spot between price and what you get | ACANII Driver Side Projector Headlight Assembly for 2013-2015 Infiniti JX35/QX60 (HID/Xenon) |  |
| Best Overall The best all-around choice for most situations | TRQ Driver and Passenger Side Headlight Assembly Set for Infiniti G37 / G25 / Q40 |  |
1. SOCKIR Front Right Headlight Assembly for Infiniti QX60 / JX35 (HID/Xenon, Ballast Included)
| Vehicle fit | 2013 Infiniti JX35, 2014–2015 Infiniti QX60 |
|---|---|
| Bulbs included | D2S high/low, PY21W turn signal, W5W parking |
| Ballast | Included (for HID/Xenon) |
| Lens material | Polycarbonate |
| Special features | Shockproof, Waterproof |
This SOCKIR headlight assembly is a direct-fit replacement for the right/front HID/Xenon unit used on 2013 Infiniti JX35 and 2014–2015 QX60 models. It arrives with the required D2S high/low beam bulb, turn signal and parking bulbs, and a ballast, so you can swap the entire unit without sourcing separate components. The housing uses polycarbonate lenses and sealed construction with one-way vents to resist moisture and impacts, which is useful for durability in wet or rough-road conditions. Metal parabolic reflectors and side microprism detailing aim to improve beam spread and visibility. Installation is described as plug-and-play and does not require cutting or drilling, though professional installation is recommended if you are not comfortable with OEM-style replacements. Buyers should note the listing emphasizes vehicle-specific fit and that no separate instructions are included; expect to follow factory removal steps or consult a technician. For reliability-focused shoppers this is a straightforward factory-style replacement that prioritizes sealed construction and complete hardware inclusion.
Best for: Reliability-focused buyers who prioritize a complete, factory-style replacement that minimizes future moisture and impact issues and prefer a product that arrives ready to install.
Less Ideal for: Drivers looking for an upgraded lighting technology, custom styling, or multi-vehicle compatibility should consider other options.
- Includes D2S high/low beam bulb, turn signal and parking bulbs, and ballast so no extra parts are needed
- Fully sealed housing with one-way vents to resist moisture and reduce corrosion risk
- Polycarbonate lens and impact-resistant shell improve durability against road debris
- Plug-and-play vehicle-specific fit designed to replace the factory unit without modification
- No installation instructions included so novice installers may need professional help
- Fitment is limited strictly to specified 2013 JX35 and 2014–2015 QX60 HID/Xenon variants
Verdict A complete, sealed HID/Xenon right headlight assembly built as a direct replacement for the QX60/JX35, aimed at shoppers who want a ready-to-install, reliability-focused swap.
2. SOCKIR HID/Xenon Headlight Assembly for 2016–2018 Infiniti QX60, Driver Side
| Fitment | 2016 Infiniti QX60, 2017 Infiniti QX60, 2018 Infiniti QX60 |
|---|---|
| Bulbs Included | D2S high/low beam, PY21W turn signal |
| Ballast Included | HID/Xenon control ballast |
| Lens Material | Polycarbonate |
| Special Features | High Beam, Shockproof, Waterproof |
This SOCKIR headlight assembly replaces the driver-side HID/Xenon unit on 2016–2018 Infiniti QX60 models and arrives with the D2S high/low beam bulb, turn signal bulb, and an HID ballast so you can swap it in without sourcing extra parts. It is built with polycarbonate lens and metal parabolic reflectors to deliver a focused beam and wider light spread, while silicone sealing and one-way vents reduce moisture intrusion for reliable output in wet conditions. The unit is described as plug-and-play and designed for direct bolt-on installation without cutting or drilling, which simplifies installation for shops and experienced DIYers. Practical limits include the need for professional alignment to ensure proper beam pattern and the possibility that aftermarket fitment quality or finish may differ slightly from factory items. For performance-minded buyers this assembly aims to restore strong HID illumination and improved nighttime visibility but expect variation in finish and mounting tolerances compared with factory-original parts.
Best for: Performance-oriented QX60 owners who prioritize restoring or improving HID nighttime visibility and prefer a ready-to-install replacement that focuses on light output and durability.
Less Ideal for: Buyers seeking an exact factory-matched finish, paint-matched trim, or guaranteed OEM mounting tolerances should consider sourcing a factory-quality replacement or visiting a dealer.
- Includes D2S HID high/low beam bulb, turn signal bulb, and HID ballast for ready installation
- Polycarbonate lens with metal parabolic reflector for brighter, focused beam and wider spread
- Sealed design with silicone and one-way vents to resist moisture and condensation
- Plug-and-play vehicle-specific fitment for 2016–2018 Infiniti QX60 to simplify replacement
- Aftermarket fit and finish can vary compared with factory parts which may affect alignment or trim gap
- Installation may still require professional headlight aiming to achieve correct beam pattern
Verdict A performance-focused, plug-and-play HID replacement for 2016–2018 Infiniti QX60 owners who want stronger, sealed HID illumination without sourcing bulbs or ballast separately.
3. Partzer Full LED Headlight Assembly for 2019-2020 Infiniti QX60 Right (Passenger)
| Vehicle fit | 2019-2020 Infiniti QX60 (right passenger, factory LED non-AFS models) |
|---|---|
| Special features | Dustproof, Waterproof, High Beam, Low Beam, LED |
| Lens material | Polycarbonate |
| Assembly required | No |
This Partzer full LED headlight assembly replaces the passenger-side unit on 2019–2020 Infiniti QX60 models that came with factory LED but without adaptive AFS. It installs as a bolt-on replacement with no drilling or modification, and uses clear lenses and micro-prism reflectors to deliver a defined Z-shaped low-beam cutoff for reduced glare and improved road illumination. The housing is sealed with butyl and rated IP65 for water resistance, and the seller states the unit meets SAE and DOT standards. Bulbs are not included so you must transfer or source bulbs separately. As a budget-focused replacement it offers factory-style fitment and a bright LED projector look at a lower cost than dealer parts, but expect potential differences in long-term finish or internal component sourcing compared with factory-quality original parts.
Best for: Budget-conscious Infiniti QX60 owners who need a cost-effective, direct-fit replacement headlight and prioritize immediate fitment and improved night visibility over buying dealer parts.
Less Ideal for: Buyers seeking a factory-sourced or dealer-level unit with guaranteed identical internal components and finish should consider OEM replacements instead.
- Vehicle-specific bolt-on fit for 2019–2020 Infiniti QX60 passenger side, so installation avoids drilling or modification
- Full LED projector design and clear micro-prism reflectors for a sharp beam pattern and improved nighttime visibility
- IP65-rated, butyl-sealed housing designed to resist water ingress and reduce internal fogging
- SAE and DOT compliance claimed, indicating it meets common regulatory illumination and safety requirements
- Bulbs are not included so additional parts or bulb transfer from the old unit are required
- Aftermarket sourcing may yield variance in long-term finish and internal components compared with factory replacement parts
Verdict A budget-friendly, bolt-on full LED passenger headlight for 2019–2020 Infiniti QX60 that delivers strong fitment and visibility but requires separate bulbs and may differ from factory-quality internals.
4. AKKON Projector LED Headlight Assembly Pair for 2013 Infiniti JX35 / 2014–2015 QX60 (HID Model)
| Fitment | 2013 Infiniti JX35 / 2014-2015 Infiniti QX60 |
|---|---|
| Compatibility | Factory HID/Xenon headlight models only |
| Wattage | 35 watts |
| Special feature | Waterproof |
These AKKON projector headlight assemblies are a direct-fit replacement for the HID/Xenon headlight models on the 2013 Infiniti JX35 and 2014–2015 QX60. They use projector housings and integrated LED light tubes to produce a more focused beam pattern than older crystal-style lenses, and are intended to work with existing HID ballasts and bulbs. Typical use is a full headlight swap to update appearance and light pattern while retaining factory HID performance. Notable features include DOT and SAE approval, waterproof housing, and a chrome finish. Practical benefits are improved beam control from the projector lenses and a modern LED halo appearance. Important limitations are that bulbs or ballasts may not be included so additional purchases or wiring changes could be required for halo and LED connections, and some buyers have reported moisture intrusion issues which suggests careful inspection and professional installation are advisable.
Best for: Risk-averse mainstream buyers who want a factory-style replacement that refreshes lighting and appearance while keeping fitment and on-road legality straightforward.
Less Ideal for: Drivers who want a plug-and-play upgrade without any wiring or additional component purchases, or those seeking a guaranteed long-term moisture-sealed aftermarket option.
- Vehicle-specific fit for 2013 Infiniti JX35 and 2014–2015 QX60 HID models reduces modification during installation
- Projector-style design yields a sharper, more controlled beam pattern than traditional reflector housings
- DOT and SAE approval indicate the assemblies meet basic street-legal standards
- Waterproof housing helps protect internal components from weather exposure
- Bulbs and HID ballasts are not guaranteed included so you may need to buy or reuse components
- Some users reported moisture inside the assembly after installation which may affect long-term durability
Verdict A factory-style projector headlight pair that modernizes the QX60/JX35 HID setup but may require bulbs, wiring work, and careful installation to avoid moisture issues.
5. ACANII Driver Side Projector Headlight Assembly for 2013-2015 Infiniti JX35/QX60 (HID/Xenon)
| Vehicle fit | 2013-2015 Infiniti JX35 / 2014-2015 QX60 |
|---|---|
| Side | Driver Side |
| Compatible lighting | Factory HID/Xenon systems |
| Lens material | Polycarbonate |
| Regulatory markings | DOT & SAE stamped |
This ACANII driver-side projector headlight replaces the factory assembly for 2013–2015 Infiniti JX35 and 2014–2015 QX60 vehicles equipped with HID/Xenon lighting. It ships as a complete housing and lens only, meant to re-use the vehicle’s original Xenon components and ballast. The unit features a chrome housing, polycarbonate lens with UV protection, and factory-style projector and leveling motor so it provides the same beam control and DOT/SAE compliance as the stock part. Installation requires alignment and reuse of the factory bulb and wiring, and some buyers report the D1S bulb socket and projector trim require careful positioning during bulb installation. The housing uses butyl sealant to limit condensation and is sold as a vehicle-specific aftermarket replacement rather than a factory component. For a practical owner looking to restore correct beam pattern and appearance on a QX60 without paying dealer prices, this offers a close, functional match but expect some hands-on fitting when swapping bulbs.
Best for: Practical optimizers who want a factory-style replacement that restores appearance and beam control at a lower cost than dealer parts and are comfortable doing a moderate DIY install or working with a local shop.
Less Ideal for: Buyers seeking a plug-and-play swap with included bulbs or a certified factory unit should consider alternatives or dealer replacement parts instead.
- Direct-fit, vehicle-specific design for 2013–2015 Infiniti JX35/QX60 HID/Xenon models
- Polycarbonate lens with UV protection and butyl sealant to reduce condensation and impact damage
- Includes projector and headlight tilting motor to restore proper beam pattern and leveling
- Meets DOT and SAE marking for legal road use in USA and Canada
- Does not include bulb or ballast so factory Xenon components must be reused or purchased separately
- Some users report a less robust D1S bulb socket that requires careful alignment during installation
Verdict A cost-effective, vehicle-specific HID projector replacement for QX60 owners who want factory-style beam performance while accepting minor installation fiddling.
6. TRQ Driver and Passenger Side Headlight Assembly Set for Infiniti G37 / G25 / Q40
| Fitment | Infiniti G25/G37/Q40 specific years listed |
|---|---|
| Lens Material | Polycarbonate |
| Quantity | 2 Piece Headlight Set |
| Bulb Technology | HID/halogen compatible |
This TRQ two-piece headlight set replaces both driver and passenger assemblies and is intended as a direct-fit replacement for specified Infiniti G25, G37 and Q40 model years. It arrives pre-assembled with clear polycarbonate lenses and chrome bezels and is typically used by DIYers to restore exterior appearance and night-time visibility without modifying the vehicle. Notable features include vehicle-specific fitment, included halogen/HID-capable housings, and TRQ support materials such as step-by-step installation videos. In practice the housings generally line up with factory mounting points and remove the need for extensive body work during swap-out, and reviewers note improved brightness and a refreshed look. Important caveats are mixed reports on beam aiming and adjustment mechanism reliability and occasional variability in beam pattern; some users had to re-aim the lights or address fitment/adjuster issues after installation. Expect a straightforward cosmetic and functional replacement for worn or damaged housings, but plan time to aim the low beams and verify proper alignment after install.
Best for: A balanced all-round buyer who wants a cost-effective, factory-style replacement to refresh an Infiniti's front end and restore regular night-time visibility while keeping the repair process largely DIY-friendly.
Less Ideal for: Drivers who need guaranteed, out-of-the-box, precisely tuned beam patterns for performance driving or who prefer dealer-sourced factory units for warranty-backed fitment should consider other options.
- Direct-fit, pre-assembled left and right housings that simplify DIY replacement for compatible Infiniti models.
- Clear polycarbonate lenses and chrome bezels restore factory-style appearance.
- Designed for standard replacement bulbs with HID/halogen compatibility, enabling reuse or upgrading of bulbs.
- Includes access to installation videos and manufacturer guidance to help with DIY installs.
- Several reviews report issues with the headlight aiming mechanism or inconsistent beam pattern that may require additional adjustment.
- Some users experienced condensation, cracked or poorly finished units in isolated cases, indicating variable quality control.
Verdict A practical, pre-assembled direct-replacement set that restores appearance and basic function for compatible Infiniti sedans but may require beam re-aiming and inspection after installation.
Choosing the Right Infiniti QX60 Headlight Assembly: Key Factors to Consider
Fitment and Mounting
Correct fitment is the first priority because the assembly must align with factory mounting points and body contours to seat properly. A precise fit reduces installation time and avoids the need for aftermarket brackets or drilling.
Poorly fitting assemblies can cause misalignment, gaps that allow water ingress, and stress on adjacent panels. When fitment matches the Infiniti QX60 mounting points, you maintain original alignment of the beam and preserve body aesthetics, which helps ensure predictable headlight aiming and long-term durability.
Beam Pattern and Light Output
Beam pattern determines how light is distributed on the road and whether it produces a usable cutoff to prevent glare. Look for assemblies that reproduce a clear low-beam cutoff and a focused high beam for distance illumination.
Light output affects night-time visibility directly. Consider assemblies designed for the correct bulb type and reflector geometry so the beam is even and consistent. Inconsistent patterns can create dark spots or excessive scatter that reduce usable visibility.
Lens Material and UV Resistance
Lens clarity influences how much light actually reaches the road and how evenly it spreads. Polycarbonate lenses are common and should include a UV-resistant coating to prevent yellowing and hazing over time.
A durable lens coating preserves output and reduces the need for frequent polishing or replacement. When a lens resists UV degradation and surface abrasion, maintenance is easier and long-term visibility remains more consistent.
Sealing and Moisture Protection
Proper sealing prevents water, dust, and condensation from entering the assembly, which can fog lenses and corrode internal components. Look for assemblies with reliable gaskets, solvent-welded seams, or factory-style seals to reduce the risk of moisture intrusion.
Water inside a headlight can cause bulbs or reflectors to fail prematurely and create uneven light output. Good moisture protection extends service life and maintains consistent beam performance under wet conditions.
Bulb Compatibility and Electrical Connections
Compatibility with the vehicle s existing bulb types and connectors simplifies installation and avoids splicing or adapter work. Verify the assembly supports the correct low- and high-beam bulb formats and that the harness connectors match factory terminals.
Electrical compatibility also matters for features such as daytime running lights or integrated turn signals. Assemblies designed for plug-and-play connection reduce installation errors and ensure all lighting functions operate as intended.
Durability and Construction Quality
Construction quality affects how well the assembly stands up to vibration, road debris, and temperature cycles. Robust housings and secure mounting tabs reduce the risk of cracks or breakage from everyday use or minor impacts.
Materials and internal finishes influence reflector longevity and resistance to corrosion. Choosing an assembly with solid build quality helps maintain consistent light output and reduces the likelihood of premature replacement.
FAQ
How do I know if my Infiniti QX60 needs a full headlight assembly replacement?
If the housing is cracked, the lens is severely discolored, or there is persistent moisture inside that cannot be dried, a full assembly replacement is often the most reliable fix. Minor surface haze or small scratches can sometimes be restored, but structural damage or compromised seals typically require replacement to restore proper performance.
Can I replace the headlight assembly myself on an Infiniti QX60?
Many owners can handle a headlight assembly replacement with basic tools and some mechanical aptitude, since the process usually involves removing fasteners, unplugging the harness, and swapping the assembly. However, tasks like aiming the beam and ensuring watertight seals may benefit from professional assistance if you are unsure.
Will a replacement assembly affect beam aim or require adjustment?
A replacement that matches factory mounting points should allow straightforward aiming or require only minor adjustments. It is common to check and adjust the beam after installation to ensure correct height and lateral alignment, especially to avoid glare or poor roadway coverage.
Are LED-style assemblies compatible with the Infiniti QX60 electrical system?
Compatibility depends on the assembly design and whether it is intended to use the same bulb type or includes its own LED driver electronics. Assemblies that directly accept the vehicle s specified bulb types are simpler to fit, while those with integrated LEDs may require verification of wiring compatibility and may need additional components for proper function.
How important is lens maintenance after installing a new assembly?
Routine cleaning and protection of the lens surface help preserve light output and prevent premature yellowing. Using mild cleaners and applying a UV protectant if recommended can extend clarity. Good maintenance reduces glare and keeps beam performance consistent over time.
How We Chose the Best Infiniti QX60 Headlight Assembly
We focused on products that directly fit the Infiniti QX60 and that meet core expectations for correct mounting and electrical compatibility. Key evaluation criteria included fitment accuracy to factory mounting points, beam pattern and cutoff to ensure correct illumination without glare, and lens clarity and UV resistance for long-term visibility. We also assessed materials and sealing quality to limit moisture intrusion, and compatibility with the vehicle s existing wiring and bulb types to simplify installation. We excluded assemblies that required significant body modification or custom adapters, as well as items with unclear fitment data. Our shortlist emphasizes options that balance straightforward installation, durable construction, and consistent light output for typical driving conditions. The result is a selection intended to minimize installation hassle while restoring factory-like function.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing a headlight assembly on an Infiniti QX60, prioritize correct fitment, beam pattern, and reliable sealing. These factors most directly affect visibility, safety, and how long the assembly will perform without issues. Balance bulb compatibility and construction quality with ease of installation. Focusing on mounting accuracy, lens durability, and moisture protection will help you restore factory-like illumination and minimize future maintenance.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Lighting
- Browse all Auto Parts
