Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
When an ABS wheel speed sensor fails, you can experience unpredictable braking behavior, warning lights, and impaired traction control. Choosing the right replacement for your Infiniti QX60 matters because proper fitment and signal accuracy directly influence the vehicles anti-lock braking and stability systems. This guide highlights the top shortlisted sensors for the QX60 and explains the practical differences that affect everyday driving. Below you will find the top picks for the Infiniti QX60 ABS wheel speed sensor, along with the evaluation criteria we used to identify reliable options and what to watch for during installation.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium ABS Wheel Speed Sensor Set for Infiniti Q50/Q60 Rear (2-Pack) |  |
| Most Popular A crowd favorite that many people choose with confidence | YHTAUTO Front ABS Wheel Speed Sensors (Set of 2) for Infiniti FX35/FX45 |  |
| Best Quality Built to a higher standard if you want something more solid | SEADEAR ABS Wheel Speed Sensor Set of 4 for Infiniti Q50/Q60 (Front and Rear) |  |
| Best Budget The cheapest option that still gets the job done reliably | Wbsteanaten ABS Wheel Speed Sensor for Infiniti QX60 (Front) |  |
| Most Sold A high-volume bestseller chosen again and again | TRQ Rear ABS Wheel Speed Sensor Set for Infiniti QX60 / JX35 / Nissan Pathfinder (Rear, 2-piece) |  |
| Best Value for Money The sweet spot between price and what you get | Ynovvo Front ABS Wheel Speed Sensor (Left & Right) |  |
| Best Overall The best all-around choice for most situations | A-Premium ABS Wheel Speed Sensor for Nissan Pathfinder and Infiniti QX60 (Rear, Driver and Passenger) |  |
1. A-Premium ABS Wheel Speed Sensor Set for Infiniti Q50/Q60 Rear (2-Pack)
| Vehicle fitment | Infiniti Q50 2014-2020, Q60 2017-2019 |
|---|---|
| Location | Rear left and right |
| Terminal quantity | 2 Pins |
| Material | Acrylonitrile Butadiene Styrene |
This two-piece A-Premium ABS wheel speed sensor set is intended as a direct replacement for rear left and right sensors on compatible Infiniti vehicles. It installs where the factory sensor reads wheel speed for the ABS and traction control systems, so fitment and connector match are important for a straightforward swap. The sensors are molded from ABS plastic with flange mounts and a two-pin terminal, and the listing cites OEM reference numbers for compatibility. In use the parts clear ABS/traction codes and restore normal system operation based on multiple user reports. Practical benefits include replacing a failed sensor quickly to regain braking and stability features and avoiding dealer-level diagnostic charges. Limitations are that these are aftermarket replacements rather than factory-brand units and long-term durability will depend on installation and local conditions. Also the set is specific to rear positions only, so front-sensor issues require a different part.
Best for: Reliability-focused buyers who prioritize restoring safe, factory-quality braking and stability behavior without unnecessary complexity; ideal when you want a straightforward replacement to clear ABS faults and return systems to normal.
Less Ideal for: Buyers seeking factory-brand parts for long-term OEM provenance or those who need front wheel sensors or a full vehicle sensor overhaul should look elsewhere.
- Sold as a matched two-piece rear set for driver and passenger sides
- Direct-fit design with flange mount and factory-style two-pin connector for simple installation
- Lists OEM reference numbers to help confirm vehicle compatibility
- Multiple customer reports of immediate resolution of ABS/traction warning lights
- Aftermarket construction may not match the long-term durability of factory-brand sensors
- Set covers rear wheel positions only and will not replace front sensors if those are faulty
Verdict A practical, direct-fit rear sensor pair that reliably clears ABS/traction faults on compatible Infiniti models but is an aftermarket alternative to factory-brand parts.
2. YHTAUTO Front ABS Wheel Speed Sensors (Set of 2) for Infiniti FX35/FX45
| Connector | 2 Pins |
|---|---|
| Location | Front Left and Right |
| Mounting Type | Flange Mount |
| Specific Uses For Product | Speed |
These two YHTAUTO ABS wheel speed sensors are sold as a direct-replacement pair for the front left and right positions on compatible Infiniti vehicles. They monitor wheel speed and feed that signal to the vehicle’s ABS and traction control systems. Installation follows the factory procedure: remove the wheel, unbolt the sensor, unplug the 2-pin connector and swap in the new unit. The sensors are made from plastic with a flange mount and push-pull output, so they match typical factory-style fitment and routing. For a convenience-minded buyer this set provides a quick way to restore ABS and speed-signal function without sourcing individual parts. However, buyer experiences vary: many report straightforward fit and function while a minority found signal or durability problems, so long-term reliability may not match higher-cost factory-quality sensors. If you want a low-effort replacement that usually gets the job done, this is a practical option, but expect to verify ABS operation after installation and be prepared to replace again if issues arise.
Best for: Convenience-driven buyers who want an affordable, ready-to-install replacement to quickly restore ABS and speed-sensor function without sourcing separate parts.
Less Ideal for: Buyers seeking a long-term, professional-grade factory-quality replacement or those unwilling to risk a potential re-replacement should consider higher-end alternatives.
- Sold as matched left and right pair for front wheel positions
- Factory-style flange mount and 2-pin connector for straightforward swap-in
- Simple installation follows standard wheel removal and sensor bolt procedure
- Compatible with Infiniti front ABS and traction control systems so it restores speed signal functions
- Some users report intermittent signal or early failure compared with factory-quality sensors
- Made of basic ABS plastic which may be less durable in harsh environments
Verdict A low-effort, budget-friendly pair of front ABS sensors that usually restore function quickly but may not match long-term durability of higher-end factory-quality replacements.
3. SEADEAR ABS Wheel Speed Sensor Set of 4 for Infiniti Q50/Q60 (Front and Rear)
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Electrical signal |
| Sensing Distance | 5 Centimeters |
| Measurement Accuracy | ±2% |
This SEADEAR four-piece ABS wheel speed sensor kit replaces front and rear sensors on applicable Infiniti Q50 and Q60 models to restore proper wheel speed signals used by the ABS and traction control systems. Installers typically use these sensors when a faulty sensor triggers ABS, AWD or traction-control warnings or when diagnosing intermittent speed-signal faults. The sensors are molded ABS plastic with flange mounts and an electrical signal output; the listing notes a 5 centimeter sensing distance and claimed ±2% measurement accuracy, which helps ensure consistent wheel-speed reporting. In practice this kit provides a full-axle replacement so you can swap all affected corners without hunting for individual parts. Limitations to consider are that these are aftermarket replacements rather than factory-brand parts and longevity will depend on installation quality and local driving conditions. Also the listing does not include detailed vehicle fitment beyond model years, so double-check connector and harness compatibility before purchase.
Best for: Performance-oriented Infiniti owners who prioritize restoring accurate ABS and traction control function quickly and prefer replacing all wheel sensors at once to eliminate intermittent faults.
Less Ideal for: Drivers who require direct factory-brand replacement parts for warranty or long-term fleet reliability should consider OEM sensors instead.
- Complete four-sensor set covers both front and rear wheels for a single repair event
- Flange-mount design matches factory mounting style for straightforward replacement
- Electrical signal output with specified sensing distance and measurement accuracy aimed at reliable speed reporting
- Aftermarket part rather than factory brand so fit and long-term durability can vary
- Product listing omits detailed connector diagrams which may require verifying plug compatibility before install
Verdict A convenient four-sensor aftermarket kit that restores wheel-speed signals on Infiniti Q50/Q60 models but requires confirming connector fit and accepting an aftermarket part.
4. Wbsteanaten ABS Wheel Speed Sensor for Infiniti QX60 (Front)
| Fitment | Infiniti QX60 2014-2019 V6 3.5L |
|---|---|
| Position | Front Left & Right |
| Special Features | High sensitivity chip; IPX9K water resistant; rapid signal transmission |
| Manufacturer | Wbsteanaten |
This Wbsteanaten front ABS wheel speed sensor is a direct-fit replacement aimed at Infiniti QX60 owners who need a low-cost remedy for ABS or traction warnings. It plugs into the factory harness and supplies wheel speed data to the vehicle computer, restoring ABS, traction control, and stability functions after a failed sensor. Notable features include a claimed high-sensitivity chip for fast signal response, IPX9K water resistance for reliability in wet conditions, and heat-rated operation across a wide temperature range for durability. In practice the sensor is intended for simple swap-in installation without modifications and should return consistent wheel-speed readings that clear warning codes when the rest of the braking system is sound. The main limitations are the typical uncertainties with aftermarket parts: long-term durability vs a factory unit is less documented and fitment must be confirmed for year and position before buying. For a cost-focused repair this sensor offers the key functions most drivers need at a low price, but buyers who want extended proven longevity may prefer a higher-end or factory-quality unit.
Best for: Budget-conscious Infiniti QX60 owners looking for an affordable, quick repair to clear ABS or traction-control warnings and return normal system operation.
Less Ideal for: Drivers seeking a long-term, dealership-grade replacement or a sensor with an extended proven service history should consider higher-end factory-quality options instead.
- Designed to fit Infiniti QX60 2014–2019 front application for straightforward replacement
- Claims ultra-high sensitivity chip for fast, accurate wheel-speed signal output
- IPX9K water resistance and wide temperature rating for reliable performance in wet or extreme conditions
- Limited long-term reliability data compared with higher-cost factory-quality sensors
Verdict A low-cost, direct-fit front speed sensor that restores ABS functionality on Infiniti QX60s while trading off the long-term assurance of a factory-quality unit.
5. TRQ Rear ABS Wheel Speed Sensor Set for Infiniti QX60 / JX35 / Nissan Pathfinder (Rear, 2-piece)
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Push Button |
| Quantity | 2 Piece |
This TRQ kit provides two rear ABS wheel speed sensors intended as direct replacement parts for the specified Infiniti QX60/JX35 and Nissan Pathfinder years. It installs in the rear driver and passenger positions and is offered as a pre-assembled, flange-mount sensor set that matches common factory fitment and electrical connections. In typical use it replaces failed or noisy sensors to restore accurate wheel-speed data for ABS and traction control systems. Notable practical features include plug-and-play design to simplify DIY or shop installation and TRQ's catalog of how-to videos to guide the repair. The kit lists multiple reference numbers for cross-referencing and arrives as a matched pair to avoid sourcing individual sensors separately. Limitations are that compatibility is limited to the listed vehicles and years so fitment must be confirmed before purchase, and the listing does not include extended testing data or warranty details in the product specs, so buyers relying on long-term durability claims should consider that uncertainty.
Best for: Risk-averse mainstream buyers who prioritize a straightforward, factory-style replacement and prefer parts backed by clear fitment guidance and installation support.
Less Ideal for: Shoppers needing universal or cross-vehicle sensor options or those seeking suppliers with detailed longevity testing and documented extended warranties should look elsewhere.
- Sold as a matched pair for both rear wheel positions, avoiding the need to buy sensors individually
- Designed for flange-mount direct replacement to simplify installation and ensure correct alignment
- Pre-assembled components and available DIY videos reduce installation time and help non-expert installers
- Fitment applies only to the listed Infiniti and Nissan models and years so incorrect selection will require return or replacement
- Manufacturer-supplied details do not include independent durability testing or explicit warranty information
Verdict A practical, direct-fit rear sensor pair for Infiniti QX60/JX35 owners who want a plug-and-play replacement with DIY installation support.
6. Ynovvo Front ABS Wheel Speed Sensor (Left & Right)
| Manufacturer | Ynovvo |
|---|---|
| Manufacturer Part Number | 47910-1WW0A |
| OEM Part Number | 0265008383, 47910-1WW0A, 479101WW0A, 5S13336, 2ABS0908, AB1101, ALS2358 |
These Ynovvo front ABS wheel speed sensors are sold as a left-and-right pair and are designed to replace factory front speed sensors on compatible Infiniti models. Installed at the wheel hub, they restore the vehicle speed signal used by the ABS and traction control systems. The listing emphasizes OE-equivalent fit and simple bolt-and-plug installation, so routine DIY swaps or quick shop installs are straightforward. Buyers will appreciate that both sides are included and that the sensors match common Infiniti part numbers, which helps ensure correct electrical connectors and mounting. On the practical side the sensors are presented as tested for reliable operation and come with multiple product images to confirm connector and bracket shape. Limitations are that fitment must be confirmed against your vehicle VIN and the listing does not include detailed electrical specs or a vehicle-specific installation guide, so someone replacing sensors for the first time should be prepared to reference a service manual or follow online guides.
Best for: Practical optimizers who want an affordable, ready-to-install replacement pair that restores ABS and traction control function without unnecessary extras.
Less Ideal for: Buyers who need manufacturer-backed electrical specs, a dealer-level fitment guarantee, or sensors pre-programmed for specific VINs should consider factory-quality alternatives.
- Sold as a matching left and right front sensor pair for a complete front-axle repair
- Marketed to match factory part numbers for correct connector and mounting fit
- Simple bolt-and-plug installation suitable for basic DIY or quick shop replacement
- Multiple product images and listings of compatible part numbers help verify fit
- No detailed electrical specifications or calibration information provided
- Compatibility requires careful vehicle verification since listings cover multiple Infiniti models
Verdict A budget-conscious pair of front Infiniti speed sensors that aim to match factory fit for practical, no-frills ABS repairs.
7. A-Premium ABS Wheel Speed Sensor for Nissan Pathfinder and Infiniti QX60 (Rear, Driver and Passenger)
| Compatible vehicles | Infiniti QX60 2014-2019; Nissan Pathfinder 2013-2020 |
|---|---|
| Connector pins | 2 Pins |
| Location | Rear driver and passenger side |
| Output type | Digital |
| Mounting type | Flange Mount |
This A-Premium ABS wheel speed sensor plugs into the vehicle harness and replaces the rear left and right sensors to restore accurate wheel speed signals to the anti-lock brake system. It is sold as a direct-fit replacement for Infiniti QX60 models from 2014–2019 and is typically used when a faulty sensor triggers ABS or traction control warnings or causes stability control issues. Notable features include a two-pin connector, flange-mount design, and digital output for consistent signal transmission. Buyers will appreciate the claimed factory-spec fit, included retainer clip locations that match the harness, and a one-year unlimited-mileage guarantee for peace of mind. Installation is straightforward for a competent DIYer, though removing rusted retainers on older vehicles can be the hardest part. A small number of users report occasional premature failure or tight dimensional tolerance that required minor trimming during installation, so there is a slight risk of a defective unit or fitment variance. For QX60 owners this sensor offers a practical, lower-cost alternative to dealer parts with mostly reliable real-world performance.
Best for: Balanced owners wanting a reliable, cost-conscious factory-style replacement sensor for routine ABS or stability-control repairs on an Infiniti QX60.
Less Ideal for: Drivers seeking a premium OE-branded dealer part or those who prefer professional diagnosis and installation for complex electrical faults should consider alternatives.
- Direct-fit replacement specified for Infiniti QX60 2014–2019 rear sensor locations
- Two-pin digital output and flange mount match factory connector style for simple plug-in installation
- Includes matching retainer clip placements and factory-spec connector for correct harness routing
- One-year unlimited-mileage guarantee provides added buyer confidence
- Some buyers reported a small number of early failures requiring replacement
- Occasional tight dimensional tolerance on the housing that in rare cases needed minor trimming to fit
Verdict A practical, mostly reliable factory-style rear ABS sensor for the QX60 that delivers OEM-like fit and function at a lower cost, with occasional fit or early-failure risks.
Choosing the Right Infiniti QX60 ABS Wheel Speed Sensor: Key Factors to Consider
Electrical Signal Accuracy
A wheel speed sensor must generate a clean, consistent waveform so the vehicles ABS module can accurately interpret wheel speed. Variations in amplitude or noise can trigger warning codes or cause the ABS to disengage temporarily.
Assessing signal accuracy matters because it affects braking modulation and traction control decisions. Even if a sensor fits mechanically, poor magnetic or Hall-effect performance can produce intermittent faults or false readings during cornering and stops.
Connector and Pin Compatibility
Correct electrical connector geometry and pin assignment are essential for plug-and-play replacement on the Infiniti QX60. Mismatched pins or loose terminals can lead to poor contact, intermittent signals, or short circuits.
Ensure the replacement sensor uses the same connector type and wiring orientation as the original. Reliable terminals and secure locking features reduce the risk of vibration-related disconnection or corrosion-driven resistance increases.
Mechanical Fit and Mounting
Proper mounting location and secure fasteners keep the sensor at the correct distance from the tone ring or reluctor wheel. If the sensor is misaligned or mounted too far from the target, the ABS module may receive weak or no signals.
Consider bracket shape, mounting hole spacing, and any integrated clips. Sensors designed for the vehicle will maintain correct air gap and resist movement from road vibration, which helps prevent intermittent faults after installation.
Sealing and Environmental Resistance
Wheel speed sensors are exposed to moisture, road salt, and debris. Effective sealing prevents water ingress that can short the sensing element or corrode contacts. Materials that resist salt and chemical exposure extend service life in varied climates.
Look for robust overmolding, corrosion-resistant metals, and durable cable jacketing. Good environmental protection reduces the likelihood of early failure and helps maintain consistent readings over the long term.
Thermal and Vibration Durability
Under-hood temperatures and road vibration place mechanical and electrical stress on sensors. Components that withstand thermal cycling and repeated vibration maintain their calibration and connection integrity.
Durability affects how often a sensor will need attention and whether it will produce intermittent fault codes. Prioritizing sensors with proven resistance to heat and mechanical fatigue can minimize future troubleshooting.
Installation Accessibility and Serviceability
Ease of installation matters because it influences the risk of damage during replacement and the time needed to restore ABS functionality. Sensors that allow straightforward access, use common fasteners, and include clear wiring orientation reduce installation errors.
Consider whether harness length and mounting hardware are adequate. Service-friendly designs make it simpler to verify wiring and perform tests such as an ABS sensor wiring test without complex disassembly.
FAQ
What are common symptoms of a failing ABS wheel speed sensor on an Infiniti QX60?
Common signs include the ABS warning light illuminating and, in many cases, reduced traction control function. You may also notice inconsistent braking feel or intermittent activation of the ABS under normal conditions. These symptoms often prompt a diagnostic trouble code related to wheel speed input.
Where is the ABS wheel speed sensor located on the Infiniti QX60?
On the QX60, wheel speed sensors are mounted at each wheel hub assembly near the tone ring or reluctor. Access typically requires lifting the vehicle and removing the wheel to reach the sensor and its mounting hardware. Exact access steps depend on whether the sensor is front or rear mounted.
Can I perform an ABS sensor wiring test myself?
You can perform basic checks such as inspecting the connector for corrosion and testing continuity with a multimeter. Measuring resistance and checking for signal while spinning the wheel can indicate sensor function. For accurate waveform and voltage testing, a scope or professional diagnostic tool is often required.
Will replacing the wheel speed sensor clear ABS-related codes?
Replacing a faulty sensor often resolves codes tied to that sensor, but stored codes may persist until the system completes a self-test or the codes are cleared with a scanner. It is also important to verify that wiring and connectors are intact, since replacement alone will not fix a wiring fault.
How can I tell if an ABS sensor is faulty versus the wiring or module?
Diagnosing involves inspecting connectors and harnesses for damage, testing sensor resistance and output, and checking for consistent signals while the wheel turns. If the sensor output is stable and wiring is intact yet faults remain, the issue may be upstream with the ABS module or control circuitry. A structured diagnostic approach reduces unnecessary part replacements.
Are there tradeoffs between OEM and aftermarket wheel speed sensors?
OEM parts are designed to match original fit and specifications, which can simplify installation. Aftermarket options may offer similar performance but can vary in construction and long-term durability. Evaluating connector compatibility, sealing quality, and documented fitment for the QX60 helps assess whether a given aftermarket sensor is a reliable choice.
How We Chose the Best Infiniti QX60 ABS Wheel Speed Sensor
Our selection focused on parts that deliver correct electrical output and secure mechanical fit for the Infiniti QX60. Primary criteria included signal accuracy under load, compatible connector and mounting design, and resistance to common failure modes such as moisture intrusion and corrosion. We also considered durability factors like housing material, thermal stability, and sealing quality to ensure long-term reliability on this vehicle. Additional filters covered ease of installation and the availability of clear installation information specific to the QX60. We excluded items that lacked explicit QX60 fitment data, non-functional or cosmetic duplicates, and parts without documented resistance to environmental exposure. The result is a shortlist emphasizing proper fit, reliable signal performance, and robust construction—dimensions that most affect braking system behavior and real-world safety.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing an Infiniti QX60 ABS wheel speed sensor, prioritize proper fitment, signal accuracy, and environmental durability. These factors directly affect ABS and traction control performance and influence how often you will need to revisit the repair. Expect tradeoffs between ease of installation and long-term robustness. Focus on sensors with verified connector compatibility and durable sealing, inspect wiring during installation, and verify correct operation after fitting to ensure the system returns to normal function.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Electrical System
- Browse all Auto Parts
