Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive an Infiniti QX60, a properly fitted fender liner helps keep road grime, water, and debris away from the body and critical components. Choosing the right liner matters because materials, mounting design, and fitment affect corrosion prevention, noise reduction, and long-term durability. This guide highlights the top shortlisted fender liners for the Infiniti QX60 and explains the evaluation criteria we used, including material strength and fit accuracy. Read on to see which options made our list and why they perform well for typical driving conditions.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Parts N Go Front Right Fender Liner Splash Guard (Passenger Side) |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front Right Inner Fender Liner for 2015–2020 Infiniti QX60 |  |
| Best Quality Built to a higher standard if you want something more solid | Parts N Go Fender Liner Set with Clips for 2004–2010 Titan (Front L&R) |  |
| Best Budget The cheapest option that still gets the job done reliably | Garage-Pro Front Passenger Fender Liner for Nissan Altima (2016–2018) |  |
| Most Sold A high-volume bestseller chosen again and again | TRQ Inner Fender Liner Set for 2015–2020 Infiniti QX60 (Driver & Passenger) |  |
| Best Value for Money The sweet spot between price and what you get | KarParts360 Front Left Fender Liner – Replacement for 638413TA0D (Driver Side) |  |
| Best Overall The best all-around choice for most situations | TRQ Front Inner Fender Liner Set for 2013 Infiniti JX35 / 2014 QX60 |  |
1. Parts N Go Front Right Fender Liner Splash Guard (Passenger Side)
| Auto Part Position | Front Right |
|---|---|
| Installation Type | Screw-In |
| Finish Type | Powder Coated |
| Automotive Fit Type | Vehicle Specific Fit |
| Manufacturer Part Number | DS3101I8-PNG |
This replacement front right fender liner is an aftermarket, vehicle-specific splash guard intended to restore the inner wheelwell protection on compatible vehicles. It installs using the vehicle's screw-in points and is finished with a powder coat to resist surface wear. In use it keeps road debris, water, and salt off suspension and body components, which helps prevent corrosion and reduces cleaning and repair needs. Several buyers report straightforward installation when the original mounting points are intact, though some said squeezing it into the fender rim can take patience or a heat gun to finesse the plastic around tight areas. The part is made to match the referenced factory part number and generally fits without modifications, but it may not include new mounting hardware so expect to reuse clips or fasteners. For a reliability-focused replacement this liner offers a durable, factory-replacement option, but allow extra time during installation if alignment is tight or old fasteners are brittle.
Best for: Reliability-focused buyers who prioritize restoring factory-level protection and corrosion prevention on their vehicle rather than cosmetic upgrades.
Less Ideal for: Buyers seeking a universal liner or a plug-and-play kit that includes all new mounting hardware should consider alternatives that explicitly bundle fasteners and trim pieces.
- Vehicle-specific design that replaces the referenced factory part number for direct fit intent
- Powder coated finish improves surface durability against road wear
- Screw-in installation uses factory mounting points for a secure attachment
- Made to OEM specifications so no major modifications are typically required
- May arrive without new mounting hardware so original clips or screws might need to be reused or replaced
- Can require force, patience, or heat to fully seat around the fender rim on some vehicles
Verdict A practical, factory-replacement style front right fender liner that restores wheelwell protection for reliability-minded owners but may need extra patience and fasteners at install.
2. TRQ Front Right Inner Fender Liner for 2015–2020 Infiniti QX60
| Auto Part Position | Front Right |
|---|---|
| Fit Type | Vehicle Specific Fit |
| Material | Plastic |
| Compatible Years | 2015-2020 |
This TRQ front right inner fender liner is a direct-fit replacement intended for the 2015–2020 Infiniti QX60 passenger side. It installs in the wheel well to protect the engine bay and bodywork from road debris, water, and salt. The part is molded from plastic and designed as a vehicle-specific fit so most mounting holes line up with factory attachment points, which speeds installation and avoids trimming for many owners. TRQ emphasizes DIY support and supplies installation videos to guide fitment. In use it performs the expected protective function and reviews indicate a mix of thicker-feeling pieces and some that required minor drilling or adjustment to align perfectly. The liner does not include mounting hardware, so plan to reuse factory fasteners or source replacements. Buyers should expect a more budget-oriented aftermarket material compared with a factory-quality part, but for routine repairs this liner offers a practical, lower-cost way to restore fender protection on an Infiniti QX60.
Best for: Convenience-driven Infiniti QX60 owners who want a quick, lower-cost repair that gets the car back to protected operation without sourcing an OEM part.
Less Ideal for: Owners seeking an exact factory-quality replacement with included hardware or those unwilling to make minor fitment adjustments should consider alternative factory-quality parts.
- Made as a vehicle-specific front right replacement for 2015–2020 Infiniti QX60 for straightforward fitment
- Molded plastic construction provides protection against road debris and moisture
- Installation resources and DIY videos available to assist owners
- Generally lines up with most factory mounting points, reducing installation time
- Mounting hardware not included so fasteners must be reused or purchased separately
- Fitment can vary slightly and some units may require drilling or minor trimming
- Material is aftermarket plastic and can feel thinner than factory-quality liners
Verdict A practical, vehicle-specific replacement that restores fender protection on a 2015–2020 Infiniti QX60 at a lower cost but may need reused fasteners or minor fitment tweaks.
3. Parts N Go Fender Liner Set with Clips for 2004–2010 Titan (Front L&R)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front |
| OEM Part Number | 638307S200, 638317S200 |
This Parts N Go fender liner set supplies both left and right front inner liners plus the necessary clips so you can replace damaged or missing wheelwell protection. It is designed as a vehicle-specific fit and installs in the front wheelhouses to shield wiring, suspension components, and the body from road debris and moisture. The listing emphasizes factory-quality fit and says no modifications are required, which speeds installation for a professional or experienced DIYer. Several buyers report occasional hole misalignment that can require drilling or repositioning clips, so expect minor trimming or extra fasteners in some cases. The plastic appears durable and comes with clips to simplify reassembly, but exact alignment issues mean a little time under the fender may be needed. For a performance-minded owner looking to restore proper under-hood airflow and protect brake and suspension components, this set offers a direct replacement option with a practical balance of fit and value.
Best for: Performance-oriented buyers who prioritize restoring or maintaining factory airflow and component protection while keeping installation practical and cost-effective.
Less Ideal for: Buyers seeking perfect bolt‑in fit without any adjustment or owners uncomfortable with minor trimming or drilling should consider alternatives with guaranteed hole alignment.
- Sold as a complete front left and right set with retaining clips for a single purchase
- Marketed to match factory-style fit so no major modifications should be needed
- Durable plastic construction protects wheelwell components from debris and moisture
- Includes clips to simplify reinstalling the liners during service
- Some mounting holes may not line up perfectly and can require drilling or relocation of clips
Verdict A practical, factory-style front fender liner set that protects wheelwell components and suits performance-focused owners, though minor hole alignment tweaks may be needed.
4. Garage-Pro Front Passenger Fender Liner for Nissan Altima (2016–2018)
| Position | Front passenger side |
|---|---|
| Interchange Part Number | 638409HS0A-PFM, NI1249157 |
| Quantity | Sold individually |
| Manufacturing | Vacuum Form |
| Compatible Years | 2016-2018 |
This Garage-Pro fender liner is an aftermarket replacement intended to restore the front passenger-side wheel well protection after damage or wear. It installs in the passenger front position and is vacuum-formed to match the OEM contour listed by the manufacturer part numbers. Typical use is a direct repair on vehicles that require the listed part interchange numbers, where it protects the engine bay and suspension from road debris, moisture, and salt. Notable features include CAD-verified fit claims and images suggesting simple installation with basic tools. The practical benefits are straightforward: it gives a low-cost option to replace a cracked or missing liner and helps prevent water and grime from reaching vulnerable components. Limitations are that fitment is specified for Nissan Altima 2016–2018 passenger side and the listing does not provide detailed material thickness or impact resistance data, so durability versus a factory-quality liner may vary. It is sold individually, so buyers replacing both sides will need two units.
Best for: Budget-conscious buyers looking to quickly and affordably replace a damaged passenger-front wheelwell liner as a practical, no-frills repair solution.
Less Ideal for: Drivers seeking a high-durability, lifetime repair or a liner specifically for an Infiniti QX60 should consider parts made and specified for that vehicle instead.
- Low-cost aftermarket replacement for a damaged passenger front fender liner
- Vacuum-formed with CAD-guided shape for a closer fit to factory mounting points
- Simple installation advertised with minimal tools required
- Matches listed OEM part numbers for straightforward parts-matching
- Fitment is specified for Nissan Altima 2016–2018 passenger side only
- Manufacturer does not list material thickness or detailed durability ratings
Verdict A very affordable passenger-side fender liner replacement for the listed Altima years that gives quick protection but may not match factory-grade durability.
5. TRQ Inner Fender Liner Set for 2015–2020 Infiniti QX60 (Driver & Passenger)
| Fitment | 2015-2020 Infiniti QX60 front driver & passenger |
|---|---|
| Quantity | 2 piece kit |
| Material | Metal |
| Manufacturer | TRQ |
This TRQ inner fender liner set replaces the front driver and passenger inner liners on 2015–2020 Infiniti QX60 models. The kit includes two preformed liners intended as direct-fit replacements to protect the wheel wells and engine bay from road debris and moisture. TRQ emphasizes ease of installation with predrilled mounting locations and DIY video support, which helps a risk-averse owner complete the job without specialized tools. Customer reports show generally good fit where holes line up, though a few buyers needed to flex or heat and massage the parts for perfect alignment. Material feels thinner than factory parts to some reviewers, so durability may be lower under heavy off-road use or in very cold climates. Hardware is not consistently included, so plan to reuse factory fasteners or have clips and screws on hand. This set is practical for routine repairs where you want a near-factory fit at lower cost, but expect occasional minor fitting work and to verify mounting hardware before starting installation.
Best for: A risk-averse mainstream buyer who wants a straightforward, lower-cost replacement that is easy to install with step-by-step guidance and minimizes time in the shop.
Less Ideal for: Not the best choice for owners planning heavy off-road use or those who want the longest-lasting, factory-quality materials without any fit adjustment.
- Vehicle-specific two-piece kit covers both front driver and passenger inner liners for 2015–2020 Infiniti QX60.
- Predrilled mounting locations and available step-by-step installation videos simplify DIY replacement.
- Lower-cost alternative to dealer parts for routine repairs and protection of wheel wells.
- Some customers report thinner material and variable fit compared with factory parts.
- Hardware is not consistently supplied so replacement clips or screws may be needed.
Verdict A practical, vehicle-specific replacement that makes DIY repair easier and saves money, but expect lighter materials and possibly extra fasteners or minor fitting.
6. KarParts360 Front Left Fender Liner – Replacement for 638413TA0D (Driver Side)
| Material | ABS Plastic |
|---|---|
| Position | Front, Driver Side |
| Fit Type | Vehicle Specific Fit |
| Safety Rating | DOT Certified |
This KarParts360 front fender liner is an aftermarket replacement intended to match the factory part number 638413TA0D and Partslink NI1248134. Made from ABS plastic, it installs in the front driver-side wheel well to protect the engine bay and suspension from road debris and moisture. The liner is vehicle-specific and sold unfinished, so it arrives ready to trim or paint if desired. Real-world benefits include a close fit to the referenced factory part number for straightforward bolt-in installation for compatible vehicles and DOT compliance for basic safety standards. Several customers note good fit after minor adjustments and that warming the part can make it more flexible during installation. Limitations are that it is not a factory-made part so hole alignment and supplied fasteners may not be exact and clips are not included, meaning you may need to reuse OEM hardware or buy fasteners separately. Expect a practical, budget-conscious replacement rather than a direct factory-supplied component.
Best for: Practical optimizers who want a low-cost, functional replacement part that restores protection without paying for a dealer part, and who are willing to handle minor installation tweaks.
Less Ideal for: Buyers seeking an exact factory-produced part with guaranteed clip hardware included or users who prefer fully finished, plug-and-play replacements should consider OEM sources instead.
- Vehicle-specific replacement matched to part numbers for simplified fit verification
- ABS construction offers reasonable durability and flexibility when warmed
- DOT and SAE compliance noted, meeting common safety standards
- Sold unfinished and without mounting clips or hardware
- Aftermarket fit can require minor trimming or hole alignment adjustments
Verdict A budget-friendly, vehicle-specific front fender liner that restores protection if you accept minor fitment fiddling and provide your own clips.
7. TRQ Front Inner Fender Liner Set for 2013 Infiniti JX35 / 2014 QX60
| Fitment | 2013 Infiniti JX35, 2014 Infiniti QX60 |
|---|---|
| Quantity | 2 Piece (driver and passenger front liners) |
| Material | Plastic |
| Auto Part Position | Front |
This TRQ two-piece front inner fender liner set replaces the factory front driver and passenger liners on 2013 Infiniti JX35 and 2014 QX60 (QX60) models. It is supplied as matched left and right pieces and intended to bolt into the factory mounting locations, so installation is typically a straightforward swap using existing clips and fasteners. The liners are molded plastic and TRQ markets them as direct-fit replacements to keep splash, road grime, and debris away from inner wheelhouse components. Buyers report that holes generally line up with factory locations and pre-assembled features reduce install time, though some users needed minor persuasion or heat forming to coax perfect alignment. Build quality varies in reports from thicker, OEM-like pieces to thinner, more flexible parts, so longevity may differ by vehicle use and climate. The kit does not include fasteners in all cases, so you may need to reuse OEM clips or buy hardware separately. For a balanced buyer, the set delivers a cost-effective, mostly reliable replacement with a mix of fitment ease and occasional fiddliness during installation.
Best for: A balanced all-round buyer who wants an affordable, direct-replacement liner set that restores wheelhouse protection without spending dealer prices and who values straightforward DIY installation.
Less Ideal for: Not the best choice for owners seeking the highest-end, long-life OEM-equivalent materials or for those who prefer a plug-and-play kit that includes every fastener and clip.
- Vehicle-specific two-piece set covers both front driver and passenger sides
- Molded to match factory mounting locations for mostly straightforward installation
- Pre-assembled components reduce install time compared with fully generic liners
- Keeps splash, debris, and road grime away from wheelhouse components
- Fasteners are not consistently included so hardware may need to be reused or purchased separately
- Plastic thickness and fit quality vary between units according to user reports
Verdict A budget-friendly, vehicle-specific front fender liner set that restores protection for the 2014 Infiniti QX60 with mostly good fitment but variable material quality.
Choosing the Right Infiniti QX60 Fender Liner: Key Factors to Consider
Material and Durability
The material determines how well a fender liner stands up to road debris, salt, and temperature swings. Stiffer plastics resist tearing and punctures from stones and rough roads, while more flexible polymers can absorb impacts without cracking.
UV resistance and chemical stability matter for long-term use. Materials that resist fading and embrittlement reduce the chance of failure over multiple seasons, which helps maintain protection for sheet metal and underbody components.
Fitment and Mounting
Accurate fitment ensures the liner aligns with factory screw and clip locations, reducing gaps where water and debris can enter. A liner that matches factory mounting points also speeds installation and reduces the need for extra fasteners or trimming.
Check whether the design covers typical entry points around the wheel well, bumper seam, and splash areas. Proper mounting influences aerodynamics and prevents flapping or rubbing that can cause noise or wear.
Coverage and Protection
Look at how much of the wheel well the liner covers, including vulnerable areas near brake lines, wiring harnesses, and suspension components. Deeper, well-contoured liners offer better splash protection and limit exposure of metal parts to corrosive elements.
Coverage also affects how well the liner deflects mud and water away from sensors and connectors. Consider whether the liner provides comprehensive protection for both front and rear wheel wells where applicable.
Ease of Installation
Installation complexity affects who can realistically replace or upgrade the liner. Some liners are designed for straightforward, bolt-on installation using existing hardware, while others require trim work or additional clips.
A design that uses factory fastener locations, includes necessary hardware, or allows installation without removing major components will save time and reduce the likelihood of improper fitting. Consider required tools and recommended access points when planning the job.
Noise and Vibration Dampening
Beyond physical protection, liners can reduce road noise and vibration transmitted into the cabin. Thicker or layered liners tend to absorb more impact noise, while thin panels may allow more sounds from the wheel well.
If you prioritize a quieter ride, look for liners with built-in damping or those that pair well with sound-absorbing undercoatings. Proper attachment also prevents rattles and flutter at highway speeds.
Maintenance and Serviceability
Consider how easy it is to access components behind the liner for routine service. Some designs include access panels or are simple to remove and reinstall, which speeds maintenance tasks like brake work or inspection.
Durable mounting points that tolerate repeated removal without breaking are important. Also evaluate how the liner handles road cleaning and whether it traps debris that would require periodic clearing.
FAQ
How do I know if my Infiniti QX60 needs a new fender liner?
Look for cracks, missing sections, or pieces hanging loose inside the wheel well. You may notice increased road noise, water intrusion into the engine bay, or visible rust forming on inner panels. If mounting tabs are broken or the liner no longer holds securely, replacement is usually warranted.
Can I install a fender liner myself, or do I need a professional?
Many fender liners are designed for owner installation using basic hand tools and the vehicle's existing fasteners. If the liner requires access to tight spaces, removal of wheels, or specialized clips, you may prefer professional help. Choose a liner that matches factory mounting points to simplify DIY installation.
What is the difference between an inner fender liner and a wheel well liner?
Those terms are often used interchangeably to describe the panel that shields the wheel well and adjacent components. The key differences come down to shape and coverage for a specific vehicle. For the Infiniti QX60, focus on a liner engineered to fit its wheel well contours and attachment points.
Will replacing a damaged liner prevent corrosion on my QX60?
A properly fitted liner reduces exposure of metal components to water, salt, and debris, which lowers the risk of corrosion. It does not reverse existing rust, but restoring effective coverage helps prevent new corrosion and limits further damage in vulnerable areas.
Are plastic fender liners durable enough for harsh winter conditions?
Quality automotive-grade plastics can be resilient in cold and resist damage from road salt and gravel. UV-stabilized and chemically resistant formulations perform better over time. Choose a liner with proven material durability and secure mounting to withstand seasonal stresses.
How We Chose the Best Infiniti QX60 Fender Liner
We focused on products designed specifically for the Infiniti QX60 and filtered choices by material resilience, exact fitment to factory mounting points, resistance to road salt and moisture, and overall ease of installation. Additional criteria included structural design that shields wiring and suspension components, compatibility with common wheel and tire sizes, and long-term wear under seasonal conditions. We excluded universal or generic panels that require significant trimming or modification, as well as any liner types that do not provide coverage for both front and rear wheel wells. Our process prioritized parts that preserve factory attachment methods and avoid permanent body alterations. The resulting shortlist reflects practical durability, installation practicality, and protection performance for real-world driving.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a fender liner for an Infiniti QX60, prioritize accurate fitment to factory mounting points, durable materials that resist road debris and salt, and sufficient coverage for vulnerable components. Balance ease of installation and maintenance with the level of protection you need for your driving conditions. Expect tradeoffs between flexibility and stiffness, and consider noise dampening and service access when selecting a liner. Focusing on fitment accuracy and material longevity will deliver the most reliable protection over time.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Body & Exterior
- Browse all Auto Parts
