Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
When a steering linkage component fails, you can notice sloppy steering, uneven tire wear, or noisy front-end behavior. Choosing the right replacement matters because the steering response and front suspension alignment depend on correct fit and durable construction. This guide highlights the top shortlisted tie rod ends for your Acura TSX and explains the most important specs and installation considerations. Use these top picks and the evaluation notes below to narrow options and prepare for service or DIY installation.
Looking for other parts? See all Acura TSX parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | BOXI Front Outer Tie Rod Ends (pair) for Acura TSX |  |
| Most Popular A crowd favorite that many people choose with confidence | MOOG ES80288 Outer Steering Tie Rod End |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Front Outer Tie Rod Ends and Front Sway Bar Links Kit |  |
| Best Budget The cheapest option that still gets the job done reliably | MYSMOT Front Outer Tie Rod Ends for Acura TSX (Pack of 2) |  |
| Most Sold A high-volume bestseller chosen again and again | SCITOO Front Suspension Kit — Inner and Outer Tie Rod Ends for 2004–2008 Acura TSX |  |
| Best Value for Money The sweet spot between price and what you get | Detroit Axle Front Outer Tie Rods (pair) for 2009-2014 Acura TSX / 2008-2012 Honda Accord |  |
| Best Overall The best all-around choice for most situations | TRQ Front Left Outer Tie Rod End (PSA68372) Compatible with 2004–2008 Acura TSX / 2003–2007 Honda Accord |  |
1. BOXI Front Outer Tie Rod Ends (pair) for Acura TSX
| Position | Front |
|---|---|
| Fitment years | 2009–2014 |
| Manufacturer | ShangHai BOXI Auto Parts Co., Ltd. |
| OEM Part Number | ES800460 ES800459 |
These BOXI front outer tie rod ends replace the factory outer tie rods on Acura TSX models from 2009 through 2014. They are supplied as a left and right pair intended for direct replacement during a steering or front-end suspension service. The parts are finished with a polished exterior and come with manufacturer part references that match common Acura replacement numbers, which helps ensure fitment. In use they restore steering responsiveness and correct toe alignment when installed and aligned by a technician, reducing play and steering wander. Buyers should expect typical replacement procedures including removal of the old tie rod ends, installation, and a professional alignment afterward. The product appears to be quality-tested to meet or exceed factory specifications, but it does not include inner tie rods or additional hardware beyond the two outer ends, so plan accordingly if other front-end components are worn. Fitment is limited to the specified TSX years so confirming year and model before purchase is important.
Best for: Reliability-focused owners who prioritize restoring factory steering feel on a 2009–2014 Acura TSX and prefer a tested, direct-fit replacement for routine suspension maintenance.
Less Ideal for: Anyone looking for a comprehensive front-end overhaul kit or a DIY buyer who wants every related part included in one purchase should consider a more complete kit instead.
- Sold as a matched left and right pair for simultaneous replacement
- Designed to match factory replacement part numbers for direct fitment to Acura TSX 2009–2014
- Polished finish that resists corrosion and presents a clean factory look
- Manufacturer claims testing to meet or exceed original performance specifications
- Does not include inner tie rods or alignment hardware, so additional parts may be needed
- Requires professional alignment after installation to ensure correct steering geometry
Verdict A reliability-minded, direct-fit pair of front outer tie rod ends for Acura TSX 2009–2014 that restores steering feel but requires alignment and may need additional front-end parts.
2. MOOG ES80288 Outer Steering Tie Rod End
| Compatible vehicles | 2004-2008 Acura TSX; 2003-2007 Honda Accord |
|---|---|
| Bearing type | Ball Bearing |
| Lubrication | Grease (greasable socket) |
| Manufacturer | MOOG Chassis Products |
The MOOG ES80288 is an outer steering tie rod end meant to replace a worn factory unit and restore precise steering response. It installs at the steering knuckle to connect the steering gear to the wheel assembly and is commonly used when you have loose steering, uneven tire wear, or a failed tie rod. Notable features include a heat-treated ball stud for improved fatigue strength, a pressed-in cover plate that keeps debris out, and a greasable socket that lets you refresh lubrication to extend life. MOOG also uses a gusher-style bearing design and a Belleville preload washer to keep the bearing tight as it wears, which helps maintain alignment between services. Installation is straightforward for anyone doing suspension work, and the part is sized for a direct fit so alignment is the expected follow-up. The part is a focused replacement component so buyers should check fitment carefully and be prepared to perform or pay for an alignment after installation.
Best for: Buyers who value convenience and want a ready-to-install, reliable replacement that simplifies steering repairs and reduces the chance of premature failure.
Less Ideal for: Drivers seeking a lifetime maintenance-free solution or a complete steering overhaul should consider upgraded kits or professional remanufactured assemblies instead.
- Direct-fit replacement engineered to match factory steering geometry
- Heat-treated ball stud for improved durability and fatigue resistance
- Greasable socket allows periodic lubrication to extend service life
- Pressed-in cover plate and gusher bearing design help keep contaminants out and reduce wear
- Part numbers and fitment listings can be confusing so verify vehicle application before buying
- This is a single outer tie rod end so replacements often require swapping the matching side and an alignment afterward
Verdict A convenience-focused, direct-fit replacement tie rod end with greasable serviceability and durability features, but confirm fitment and plan for an alignment.
3. Detroit Axle Front Outer Tie Rod Ends and Front Sway Bar Links Kit
| Fitment | 2009–2014 Acura TSX; 2008–2012 Honda Accord |
|---|---|
| Kit contents | 2 front outer tie rod ends, 2 front sway bar/stabilizer links |
| Manufacturer | Detroit Axle |
| Manufacturer Part Number | 80409-4D |
This Detroit Axle kit bundles two front outer tie rod ends with two front sway bar/stabilizer links intended as direct-fit replacements for select Honda Accord and Acura TSX models. It is typically used when steering play, uneven tire wear, or clunking from the front suspension indicates worn tie rods or sway bar links. The parts are described as premium alloy with enhanced structural strength and grease fittings on the tie rod ends for serviceability, which helps extend component life and makes periodic lubrication straightforward. Direct-fit design aims to simplify installation and restore factory steering feel and alignment stability without modification. Limitations include that this is a small kit covering only outer tie rod ends and front sway bar links, so additional worn suspension parts may still need replacement to fully resolve handling issues. Also, fitment is vehicle-specific so confirm model year before purchase.
Best for: Performance-oriented buyers who prioritize restoring crisp steering response and stability on an Acura TSX and who are willing to replace key front suspension wear items for improved handling.
Less Ideal for: Buyers seeking a complete front suspension overhaul or who need components for vehicles outside the specified Acura TSX and listed Honda Accord years should look for broader or different kits.
- Includes both front outer tie rod ends and front sway bar links for a coordinated front-end refresh
- Direct-fit replacements designed to match factory fit, reducing installation adjustments
- Premium alloy construction and reinforced structure for improved wear resistance
- Tie rod ends include grease fittings for easier maintenance and longer service life
- Kit only covers outer tie rod ends and front sway bar links so inner tie rods or other suspension parts may still need replacement
- Fitment limited to specific model years and requires verification before ordering
Verdict A practical, performance-minded front-end replacement kit that restores steering feel and serviceability on compatible Acura TSX models, but it only covers outer tie rods and sway bar links.
4. MYSMOT Front Outer Tie Rod Ends for Acura TSX (Pack of 2)
| Fits Models | Acura TSX 2009-2014 |
|---|---|
| Included Parts | Front outer tie rod end – driver and passenger (pack of 2) |
| Manufacturer | MYSMOT |
| OEM Part Numbers | ES800460, ES800459 |
These MYSMOT front outer tie rod ends replace the driver and passenger outer ends on Acura TSX 2009–2014 models. They arrive as fully assembled outer tie rod ends intended to restore steering connection and alignment after wear or damage. The parts are described as solid steel and aluminum with an electrophoretic coating to resist corrosion and wear, so they should hold up to routine road exposure. Installation is typical for outer tie rod replacement and can be done during a steering alignment service; the package includes both left and right pieces so you can replace both sides at once. The main benefits are straightforward compatibility with the TSX, corrosion-resistant finish, and the convenience of a matched pair for synchronized replacement. Limitations are that no installation instructions are included and professional installation with alignment is recommended, which adds labor cost, and the listing does not provide extensive performance testing or lifetime durability data compared with higher-end aftermarket or OE parts.
Best for: Budget-conscious buyers who need a direct-fit, no-frills replacement set to restore steering function on an Acura TSX and prefer replacing both sides at once.
Less Ideal for: Drivers seeking premium, performance-grade steering components or those who want parts with detailed longevity testing and documented aftermarket validation.
- Sold as a matched left and right pair to simplify full-front replacement.
- Fully assembled units so no additional assembly is required before installation.
- Electrophoretic coating claimed to improve corrosion and wear resistance.
- Direct fit for Acura TSX 2009–2014 which eases part selection and compatibility checks.
- No printed installation instructions included, so professional installation is recommended.
- Listing lacks independent durability or performance test data versus factory-quality parts.
Verdict A straightforward, wallet-friendly matched pair of front outer tie rod ends for Acura TSX owners who want an affordable direct-fit replacement.
5. SCITOO Front Suspension Kit — Inner and Outer Tie Rod Ends for 2004–2008 Acura TSX
| Fitment | 2004–2008 Acura TSX with 2.4L engine |
|---|---|
| Includes | 2 inner and 2 outer front tie rod ends |
| Position | Front |
| Pre-greased | Yes |
This SCITOO kit supplies two inner and two outer front tie rod ends packaged for use on 2004–2008 Acura TSX models with 2.4L engines. The parts arrive pre-greased and are designed as direct replacement steering components to restore steering feel and reduce play. Typical use is a front-end steering refresh during routine suspension repair or when you hear steering noise, feel rough steering, or experience poor tracking. The kit is made from high-strength steel and includes both inner and outer pieces so you can replace matching sides at once instead of scavenging individual parts. Practical benefits include easier alignment after installation and fewer trips to source matching components. Limitations to keep in mind are that fitment is specific to TSX 2.4L years listed and some buyers reported receiving incorrect items, so careful order verification and professional installation are recommended if you prefer low-risk repairs.
Best for: Risk-averse mainstream buyers who prioritize getting a complete, factory-style steering replacement for a 2004–2008 Acura TSX and want straightforward parts that minimize sourcing extra components.
Less Ideal for: Shoppers looking for parts that fit multiple vehicle models or years outside the specified TSX 2.4L range should look elsewhere, and do-it-yourselfers who want hand-matched OEM parts with dealer support may prefer factory replacements.
- Complete set includes both inner and outer tie rod ends so both sides can be serviced at once
- Parts come pre-greased which reduces immediate prep work at installation
- Made from high-strength steel for durability and stable steering response
- Designed specifically for 2004–2008 Acura TSX 2.4L which simplifies fitment checks
- Some buyers have reported receiving incorrect or duplicate parts in the package, requiring returns or reorders
- Installation requires proper alignment afterward and professional installation is advised for safety
Verdict A budget-friendly, full front tie rod end kit tailored for 2004–2008 Acura TSX 2.4L owners who want a complete steering refresh, but verify the contents before installation.
6. Detroit Axle Front Outer Tie Rods (pair) for 2009-2014 Acura TSX / 2008-2012 Honda Accord
| Fitment | 2009-2014 Acura TSX |
|---|---|
| Quantity | 2x Front Outer Tie Rods |
| Service feature | Grease zerk fittings |
| Manufacturer | Detroit Axle |
These Detroit Axle front outer tie rods are a straightforward replacement for a 2009–2014 Acura TSX. Sold as a pair, they replicate factory fit and steering geometry so installation is typically direct with no modification. Notable details include grease zerk fittings for easier service and parts that the brand says undergo impact and fatigue testing to improve durability. In real-world use the parts restore steering response and remove play or vibration caused by worn ends, and many DIYers will find them quick to swap using common tools and a local alignment afterward. Limitations to expect are typical of aftermarket tie rods: longevity can vary with driving conditions and repeated high-mileage use, and some users report missing auxiliary hardware like a washer or locking nut which may require reusing the OEM fasteners. For a practical optimizer looking to repair steering without paying dealer prices, these provide a reliable balance of fit, serviceability, and value when paired with a professional alignment after installation.
Best for: Practical optimizers who want a cost-effective, serviceable steering repair for an Acura TSX and are comfortable doing or arranging a simple swap and alignment.
Less Ideal for: If you want a lifetime performance upgrade or race-spec steering components, choose a performance-oriented aftermarket option instead.
- Direct-fit replacement engineered for Acura TSX steering geometry
- Grease zerk fittings improve serviceability and allow periodic lubrication
- Sold as a pair so both sides can be refreshed at once to maintain balanced steering response
- Parts undergo impact and fatigue testing according to the manufacturer
- May not include small fastener hardware such as washers or a self-locking nut
- Service life can vary with driving conditions and heavy use
Verdict A budget-friendly, serviceable direct-fit pair that restores steering feel on the Acura TSX while offering good value for routine repairs.
7. TRQ Front Left Outer Tie Rod End (PSA68372) Compatible with 2004–2008 Acura TSX / 2003–2007 Honda Accord
| Fitment | Front left outer — Acura TSX 2004-2008, Honda Accord 2003-2007 |
|---|---|
| Finish | E-Coated |
| Material | Steel housing and tie rod |
| Pre-greased | Yes |
This TRQ front left outer tie rod end is a ready-to-install replacement engineered to match factory fit and function for the specified Acura TSX years. It arrives pre-greased with a dust boot and machined steel housing so you can swap it in without modifying the steering linkage. Typical use is a straightforward front suspension repair when an outer tie rod shows play or torn boots; the pre-assembled design speeds installation and helps restore steering feel and alignment. Notable features include an e-coated finish for corrosion resistance and a sealed joint that does not require a grease zerk. Practical benefits are ease of installation, a factory-style fit, and parts-level cost savings compared with a dealer unit. Limitations are that the joint is permanently sealed so it cannot be re-greased in service, and compatibility must be confirmed for the exact year and side before purchase. Fitment is specific to the vehicle years listed, so verify the correct left/front outer location.
Best for: Balanced buyers who want a practical, factory-style replacement that simplifies installation and restores steering performance on their Acura TSX without premium dealer parts.
Less Ideal for: Drivers seeking a serviceable tie rod end with a grease fitting or those who need parts for vehicles outside the listed Acura TSX and Accord years should look elsewhere.
- Direct-fit design pre-assembled for straightforward replacement without modifications
- Pre-greased joint and dust boot reduce initial maintenance and help sealing
- E-coated machined steel finish improves corrosion resistance for longer service life
- Matches factory fit for the specified Acura TSX and Honda Accord model years
- Sealed design lacks a grease fitting so you cannot re-grease the ball joint during service
- Fitment is year- and side-specific so it will not work outside the listed vehicle applications
Verdict A practical, factory-fit replacement tie rod end for the listed Acura TSX years that simplifies installation but comes as a permanently sealed, non-serviceable joint.
Choosing the Right Acura TSX Tie Rod End: Key Factors to Consider
Fitment and Thread Specifications
Correct fitment is essential because the tie rod end must match the Acura TSX steering knuckle taper and inner tie rod thread pitch for secure installation. Mismatched threads or taper sizes can lead to failed installation or premature loosening, which compromises steering safety.
Check that the replacement lists the exact model years and chassis codes it fits, and verify stud diameter, taper angle, and thread direction. Proper fit reduces the need for thread adapters and ensures the steering geometry remains unchanged after replacement.
Ball Joint Design and Durability
The ball joint is the wear point that transfers steering inputs while allowing suspension movement, so its construction determines longevity and feel. Look for hardened bearing surfaces and seals that keep contaminants out while retaining lubrication.
A robust ball joint design resists play and maintains predictable steering response over time. Sealing quality and grease retention are key to preventing accelerated wear from water, grit, and road salt.
Material and Corrosion Protection
Tie rod ends are exposed to road debris and moisture, so corrosion resistance affects service life and ease of removal later. Components made from high-strength steel with protective coatings or plated finishes last longer in wet or salted environments.
Corrosion protection also matters for the threads and tapered stud, where rust can seize components and complicate future replacement. Consider coatings, zinc plating, or additional rust inhibitors when longevity is a priority.
Servicing Features and Greaseability
Some tie rod ends include grease fittings that allow periodic lubrication, while others are sealed for life. Greaseable units can often outlast sealed versions if maintained properly, but they require occasional access and attention during routine service.
Evaluate whether a greaseable stud and a replaceable dust boot fit your maintenance habits and garage access. For drivers who prefer minimal service, a well-sealed, high-quality unit may be preferable despite lacking a grease nipple.
Alignment and Adjustability
After replacing a tie rod end, you must achieve correct toe alignment for safe handling and even tire wear. Some replacements preserve the original adjustment range, while others require additional adjustments or an alignment at a shop.
Check whether the unit allows fine adjustment without changing inner tie rod settings, and whether installation requires pre-measuring or re-centering the steering. A replacement that preserves factory adjustment range reduces alignment complexity and potential labor.
Installation Ease and Tools Required
Ease of installation affects whether you can complete the job at home or need professional help. Factors include whether the stud uses a standard castle nut and cotter pin, whether the dust boot must be pried off, and whether special pullers or presses are needed to separate the joint.
Consider whether the replacement includes hardware and clear instructions, and whether common hand tools and a tie rod puller suffice. Simpler installations reduce labor time and the chance of installation errors that impact steering performance.
FAQ
What are common symptoms of a failing tie rod end on an Acura TSX?
Common signs include looseness in the steering wheel, uneven or accelerated tire wear on the front tires, and clunking or knocking noises when turning. You may also notice the vehicle pulling slightly to one side or reduced steering precision. If you observe these symptoms, have the steering linkage inspected promptly.
How long does a typical tie rod end last under normal driving conditions?
Lifespan varies widely depending on driving conditions and maintenance, but tie rod ends often last many tens of thousands of miles. Exposure to harsh weather, rough roads, and lack of lubrication will shorten service life. Regular inspections during tire rotations can catch early wear before it affects safety.
Can I replace a tie rod end myself, or should a professional do it?
Many mechanically inclined owners can replace an outer tie rod end with basic tools, a puller, and a torque wrench, provided they follow correct procedures. However, the vehicle will need a proper wheel alignment afterward, and removing a seized stud can require additional tools. If you are not comfortable with steering work or lack alignment access, a professional installation is safer.
Will replacing a tie rod end fix steering vibration or pulling?
Replacing a worn tie rod end can correct looseness that contributes to vibration or pulling, but these symptoms can also stem from other suspension components, tires, or alignment issues. After replacement, a professional alignment and a full inspection of adjacent components help ensure the underlying cause is addressed.
How soon should I get an alignment after replacing a tie rod end?
You should have a wheel alignment performed immediately after replacing a tie rod end, or at least before driving extensively. Even if the install was done to preserve factory adjustment, swapping steering linkage typically changes toe settings, and a verified alignment ensures safe handling and even tire wear.
How We Chose the Best Acura TSX Tie Rod End
We prioritized products that deliver correct fitment geometry for the Acura TSX and durable construction that tolerates typical road conditions. Our editorial filters included verifying OEM-style ball-joint taper and thread specifications, assessing materials and corrosion protection, checking load and wear ratings where available, and confirming compatibility with standard steering linkage and alignment specs for this vehicle. We also considered serviceability factors such as replaceable grease fittings, ease of installation, and whether the unit supports standard alignment adjustments after installation.Units were excluded if documentation did not clearly state fitment for the Acura TSX, if construction details were missing, or if the design required extensive modification to install. We focused on items that match factory geometry, offer reliable wear resistance, and simplify post-installation alignment for typical owners and professional installers alike.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting a replacement for an Acura TSX tie rod end, prioritize correct fitment, durable ball-joint construction, and adequate corrosion protection. Balance the benefits of greaseable versus sealed units with your willingness to perform routine maintenance and the typical road conditions you drive in.Remember that replacing the tie rod end is only part of restoring steering performance. Plan for a professional alignment and a quick inspection of adjacent suspension parts to confirm the repair restores safe handling and even tire wear.
Explore More:
- Check out all Acura TSX parts & accessories
- Explore Tie Rod Ends Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
