Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Acura TLX shows vibration, noise, or uneven tire wear, the wheel hub assembly is a common culprit that affects handling and safety. Choosing the right assembly matters because it integrates the bearing, mounting flange, and wheel studs into one component that directly influences ride smoothness and steering stability.This guide covers the seven shortlisted wheel hub assemblies selected as top picks for the Acura TLX. We evaluated each option on durability, bearing precision, and fitment reliability so you can quickly narrow down replacements that suit your driving needs. Read on to see the evaluation criteria and what to watch for when choosing an assembly.
Looking for other parts? See all Acura TLX parts & accessories.
Top Picks at a Glance
1. Detroit Axle Rear Wheel Hub Bearing Assembly Kit (Rear Left & Right) for 2015-2020 Acura TLX and Select Honda Accord GAS Models
| Bearing Number | 512544 |
|---|---|
| Specification Met | ISO 16949 |
| Bearing Type | Wheel Bearing |
| Compatible Lubricant | automotive grease |
This Detroit Axle kit supplies two rear wheel hub and bearing assemblies intended as direct replacements for FWD Acura TLX models from 2015 to 2020. Each assembly arrives pre-assembled with the bearing installed, so installation is mainly bolt-on after removing the old hub and associated hardware. The parts use high-quality bearing steel and a high-frequency quench heat treatment the manufacturer says improves wear and corrosion resistance, and the integrated ABS encoder saves the extra step of transferring sensors. For a balanced buyer this kit delivers near-factory fit and reduced road noise when worn hubs are replaced, and multiple customer reports show good real-world durability up to thousands of miles. Limitations include occasional packaging or sensor damage reported by some buyers and at least one report of premature failure, so careful inspection on arrival is prudent. These assemblies are specifically for FWD, gas-only TLX fitment and are not compatible with hybrid or SH-AWD models.
Best for: Buyers seeking a balanced, value-focused factory-replacement for rear hubs who prioritize reliable fit, quiet operation, and straightforward installation on a FWD Acura TLX.
Less Ideal for: Owners of hybrid or SH-AWD TLX variants or buyers who want an OEM-branded dealer part and factory-backed service should consider other options.
- Pre-assembled hub and bearing reduces installation time compared with separate components
- Includes ABS encoder so speed sensor transfer or integration is simplified
- Manufactured from high-quality bearing steel with high-frequency quench for improved wear and corrosion resistance
- Designed to match factory fit and function for FWD Acura TLX 2015–2020
- Not compatible with hybrid or SH-AWD TLX models
- Some buyers reported packaging damage or broken speed sensors on arrival in isolated cases
- At least one reported early failure, so longevity may vary by use and installation
Verdict: A practical, near-factory replacement rear hub kit that simplifies installation and restores quiet, reliable rear-end performance on FWD Acura TLX models.
2. Detroit Axle Pair Rear Wheel Bearing and Hub Assembly for Honda Accord / Acura TLX, 5-Lug
| Bearing Number | 512353 |
|---|---|
| Unit Count | 2.0 Count |
| Included Components | Wheel Bearing and Hub Assembly |
| Material Type | Alloy Steel |
| Specification Met | Oe |
This Detroit Axle kit supplies two rear wheel bearing and hub assemblies intended as factory-replacement units for compatible Honda Accord and Acura TLX models. The assemblies arrive ready to install with a 5-lug flange and encoder-style ABS provision, so they replace worn hubs without needing extra machining or bearing servicing. Constructed from alloy steel and tested for impact and fatigue, they aim to restore smooth, quiet rear-wheel operation and wheel alignment stability during regular driving and spirited use. Installation is straightforward for a shop or experienced DIYer and reviewers report fitment that matches factory geometry. The practical benefits are immediate: reduced noise, secure wheel mounting, and restored ABS sensor compatibility. Expect the obvious limitation of aftermarket hubs versus long-term factory originals in extreme high-mileage durability, and remember proper hub bore cleaning before fitting to avoid installation issues. For buyers focused on performance and high-quality replacements, these hubs offer a balance of solid build and vehicle-specific fitment.
Best for: Performance-oriented owners seeking a high-quality, vehicle-specific replacement that restores rear-wheel stability and ABS function without heavy modification.
Less Ideal for: Buyers wanting an OEM-sourced part for guaranteed factory lifespan or those unwilling to perform basic prep work before installation should consider alternatives.
- Factory-replacement design with 5-lug flange and ABS encoder to match vehicle systems
- Alloy steel construction tested for impact, wear, and fatigue
- Ships as a pair ready to install, simplifying rear-end repairs
- Multiple positive user reports of quiet operation and good fitment
- Aftermarket longevity may not match original factory parts under extreme high-mileage use
- Requires cleaning of the hub bore prior to install to ensure proper seating
Verdict: A ready-to-install pair of rear hub assemblies that restore quiet, accurate rear-wheel operation and ABS compatibility for compatible Acura TLX and Honda Accord models.
3. TRQ Rear Wheel Bearing & Hub Assembly for Acura TLX and Honda Accord (BHA51497)
| Bearing Type | Ball Bearing |
|---|---|
| Material Type | Alloy Steel |
| Included Components | Wheel Bearing & Hub Assembly |
| Wheel Stud Quantity | 5 |
| Compatible Lubricant | Grease |
This TRQ rear wheel bearing and hub assembly is a pre-assembled direct-replacement unit intended to restore rear wheel bearing function and wheel mounting for compatible Acura TLX and Honda Accord models. It installs in place of the original hub assembly and includes wheel studs and the bearing pre-pressed into the hub, which simplifies a DIY swap or shop installation and reduces labor time. Notable features include a ball bearing design, included wheel studs, grease-compatible lubrication, and an available installation video library from the manufacturer to guide the job. In practice the unit quiets rumbling or grinding from worn hubs and returns correct wheel alignment and ABS sensor operation where applicable. Build quality is alloy steel and many users report clean bolt-in fitment and solid short-term performance, though there are mixed long-term reports so periodic inspection on high-mileage vehicles is prudent. Fitment covers specific rear driver or passenger sides for TLX (2015–20) and numerous Accord rear fits across several years, so confirm side and year before ordering.
Best for: Practical optimizers who want a budget-conscious, ready-to-install replacement that minimizes shop time and lets them complete a reliable rear hub repair without sourcing multiple components.
Less Ideal for: Owners seeking an upgraded performance or heavy-duty hub for towing, racing, or extreme-duty use should consider specialty or OEM+ options instead.
- Direct-fit, pre-assembled unit reduces install time and need for bearing press.
- Includes wheel studs so fewer additional parts are required during replacement.
- Manufacturer provides step-by-step installation videos to help DIYers and shops.
- Alloy steel construction with grease-compatible bearing for standard service conditions.
- Some customers report early failures on rare units so long-term durability varies.
- Flange bolts and ABS sensor may not be included for every vehicle application.
Verdict: A ready-to-install, budget-friendly rear hub assembly that restores rear wheel function and simplifies DIY or shop replacement on specified Acura TLX and Honda Accord models.
4. maXpeedingrods Rear Wheel Bearing and Hub Assembly (fits Acura TLX 2015–2020, 5-lug)
| Application | Acura TLX 2015-2020 FWD rear |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Position | Rear left or right |
This hub-and-bearing assembly provides a direct replacement for the rear left or right on Acura TLX 2015–2020 FWD models. It combines the bearing and wheel hub with an integrated ABS tone ring so you can swap the entire unit without separate bearing press work. Typical use is a brake or wheel-end repair to eliminate noise, vibration, or looseness; installation is a straightforward bolt-in job when you follow service procedures. The listing specifies forged steel construction and claims OEM-matching fitment for 5-lug wheels, which translates to solid mounting and reduced road noise compared with a worn hub. Included flange and stud locations match the TLX pattern and the built-in encoder tone ring preserves ABS function after replacement. Limitations are that longevity depends on installation torque and driving conditions, and this is an aftermarket part rather than a factory brand, so buyers should expect variable long-term durability versus a dealer-sourced unit.
Best for: Budget-conscious TLX owners looking for a low-cost, practical replacement that restores quiet operation and ABS function without specialty tools.
Less Ideal for: Owners seeking an exact factory-branded part or who prioritize dealer warranty coverage and long-term proven durability should consider dealer-sourced replacements instead.
- Direct-fit replacement for Acura TLX 2015–2020 rear hub positions left or right
- Integrated ABS tone ring preserves wheel speed sensor function without modification
- Forged high-grade steel construction for smoother rotation and reduced vibration
- Sold as a complete hub assembly so no bearing press is required during installation
- Aftermarket part so long-term durability may vary compared with factory-brand replacements
- Fit and finish can depend on installation technique and wheel torque settings
Verdict: A wallet-friendly, bolt-in rear hub assembly that restores quiet, ABS-compatible operation on Acura TLX 2015–2020 FWD models while trading off the assurance of a factory-branded unit.
5. MOOG 512544 Wheel Bearing and Hub Assembly for Honda/Acura
| Brand | MOOG |
|---|---|
| Material | Alloy Steel |
| Bearing Number | 512544 |
| Bearing Type | Wheel Bearing |
| Compatible Lubricant | Grease |
This MOOG hub assembly replaces the wheel bearing and hub as a single unit to restore safe wheel rotation and ABS sensor alignment on compatible Honda and Acura vehicles. It is typically used as a direct replacement during front or rear hub repairs when noise, vibration, or ABS warnings indicate bearing failure. Notable features include a roll-form bearing to maintain proper preload, quad-lip seals to keep out water and debris, and coated wheel studs to resist rust and make future removal easier. In practice the part installs quickly and eliminates the need to press a separate bearing into the hub, which speeds DIY or shop labor. MOOG emphasizes application-specific raceway design for longer service life, but longevity still depends on driving conditions and installation quality. The assembly is a solid factory-quality replacement, though buyers should confirm vehicle-year fitment before purchase and expect professional-level tools for removal of the old hub on some vehicles.
Best for: A reliability-focused buyer who prioritizes a durable, factory-quality replacement to restore safe wheel operation and minimize return visits for the Acura TLX.
Less Ideal for: Buyers looking for the cheapest short-term fix or those who need a universal part for multiple vehicle models should consider other options.
- Integrated hub and bearing simplifies installation and removes need for pressing bearings
- Quad-lip seal design reduces moisture and debris intrusion
- Roll-form bearing and application-specific raceway for consistent preload and reduced wear
- Coated wheel studs resist rust for easier future removal
- Requires proper tools and sometimes heat or a slide hammer to remove the old hub assembly
- Fitment must be verified vehicle-by-vehicle to avoid ordering the wrong application
Verdict: A durable, application-specific hub assembly that gives reliability-focused TLX owners a near-factory replacement with easier installation compared with separate bearing-and-hub repairs.
6. Detroit Axle Rear Wheel Bearing & Hub Assembly (5-Lug) for Acura TLX / Honda Accord (Gas)
| Fitment | 2015-2020 Acura TLX (FWD); select 2013-2015 & 2018-2023 Honda Accord (GAS) |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Material | Carbon Steel |
| Specification Met | ISO 16949 |
This Detroit Axle rear wheel bearing and hub assembly replaces the rear left or right hub on FWD Acura TLX (2015–2020) and specified gasoline Honda Accord years. It arrives as a complete hub assembly with a built-in ABS encoder, so installation replaces the worn hub and the wheel speed sensor interface in one step. For routine repairs this part is used when you hear bearing noise, experience rough rotation, or have ABS/traction warnings tied to a faulty sensor. The steel construction and ISO 16949 spec suggest factory-style manufacturing consistency, and owners report straightforward fitment and quiet operation after installation. It does not include mounting bolts, which means you may need to source hardware separately during a repair. While it covers common gas-model fitments and comes with a long warranty, this unit is not for hybrid or SH-AWD TLX models, so confirm drivetrain before ordering.
Best for: Convenience-driven buyers who prioritize a straightforward, drop-in repair that restores wheel rotation and ABS function with minimal parts sourcing and shop time.
Less Ideal for: Buyers with hybrid or SH-AWD Acura TLX models or those who prefer a rebuild/press-in bearing approach should look for a different part or service option.
- Integrated ABS encoder eliminates a separate wheel speed sensor replacement step.
- Complete hub assembly simplifies installation compared with pressed-in bearing jobs.
- Made to ISO 16949 manufacturing standards for consistent aftermarket quality.
- Multiple user reports of good fit and quiet operation after installation.
- Mounting bolts are not included, so additional parts may be required for installation.
- Not compatible with hybrid or SH-AWD drivetrain variants of the TLX.
Verdict: A convenient, factory-style replacement hub with built-in ABS encoder for gas FWD TLX owners who want a quick, reliable drop-in repair.
7. TRQ Rear Wheel Bearing and Hub Assembly Set, 2-Piece
| Compatible models | Acura TLX 2021-2023 base model rear |
|---|---|
| Quantity | 2 piece kit (left and right rear) |
| Bearing type | Ball Bearing |
| Compatible lubricant | Grease |
This TRQ two-piece rear wheel bearing and hub assembly set replaces both left and right rear hubs on compatible Acura TLX base models and is intended as a direct-fit, factory-quality replacement. Installation is straightforward for a competent DIYer or professional technician because the assemblies arrive pre-assembled to match factory fitment and eliminate the need for bearing press work. TRQ highlights grease-compatible ball bearings and machined exterior surfaces that help reduce vibration and road noise after installation. The kit includes parts referenced to factory numbers for easier verification. Expect practical benefits like time saved during the job, restored wheel stability, and the potential to clear wheel-bearing noise or play. However, some users report occasional quality-control variability and fitment issues like mismatched wheel studs on certain applications, so inspect parts on arrival and be prepared to reuse original studs if needed.
Best for: Risk-averse mainstream buyers who prioritize a near-factory replacement and want a ready-to-install solution that minimizes garage time and repair uncertainty for their Acura TLX.
Less Ideal for: Owners seeking premium OE-brand longevity or those who prefer to upgrade to a heavy-duty or performance hub should consider higher-end alternatives or OEM factory parts.
- Direct-fit replacements for rear left and right wheel hubs on specified Acura TLX base models
- Pre-assembled hub and bearing design reduces installation time and the need for special pressing tools
- Machined exterior and factory-referenced part numbers simplify fitment verification and improve sealing against contaminants
- Some reported variability in quality control across units
- Occasional mismatch with wheel stud length or thread requiring reuse of original studs
Verdict: A practical, ready-to-install rear hub and bearing pair that restores factory-style fit and function for Acura TLX owners, but inspect parts on arrival for occasional fitment or quality variations.
Choosing the Right Acura TLX Wheel Hub Assembly: Key Factors to Consider
Bearing Precision and Play
Proper bearing tolerance directly affects noise, vibration, and steering feel. Bearings with excessive internal play allow the wheel to move under load, which shows up as looseness at the steering wheel, uneven tire wear, and potential handling instability.
When assessing assemblies, look for specifications or construction notes indicating low tolerance or preloaded bearings. Even small differences in bearing clearance can change the perceived smoothness of the ride and the expected service life, so bearing precision is a key determinant of long-term performance.
Seal Design and Contaminant Protection
Seals keep out water, road salt, and debris that accelerate bearing failure. A robust sealing arrangement prevents lubricant loss and contamination, which are common causes of early hub assembly failure, especially in areas with frequent wet driving or winter road treatments.
Consider assemblies with multi-lip seals or integrated labyrinth designs that reduce ingress. Better seals often translate into longer intervals between replacements and more consistent performance over time.
Fitment and Mounting Integrity
Correct fitment ensures the hub aligns with the vehicle's knuckle, brake rotor, and wheel studs without forcing components into improper positions. Precise mounting dimensions and accurate stud patterns reduce stress on fasteners and maintain correct wheel alignment.
Assemblies that match factory mounting interfaces minimize installation adjustments and help avoid issues like hub runout, premature rotor wear, and uneven torque distribution. Always verify the part's specifications against the Acura TLX mounting points to ensure a secure, correct fit.
ABS Sensor Compatibility
Many modern vehicles, including the Acura TLX, rely on wheel speed signals for ABS and stability control systems. Assemblies that incorporate the proper ABS tone ring or sensor interface prevent error codes and maintain safety system performance.
If the hub assembly does not include the correct sensor interface, additional components or sensor reprogramming may be necessary. Ensuring compatibility avoids diagnostic lights and preserves the functioning of driver assistance systems that depend on wheel speed data.
Material Strength and Corrosion Resistance
Hubs are exposed to road debris, salt, and mechanical loads, so material choice and surface treatment matter. Strong hub flanges resist bending and cracking under load, while corrosion-resistant coatings slow degradation that can seize fasteners or impair fit over time.
Opting for assemblies with hardened steel components and protective finishes improves longevity and reduces the likelihood of extraction difficulties during future service. Material robustness also contributes to consistent wheel alignment and structural safety.
Installation Considerations and Serviceability
An assembly designed for straightforward installation lowers the risk of installation errors that can shorten service life. Features like included hub nuts, compatible studs, or pre-pressed bearings reduce the number of steps and tools required.
Ease of serviceability also matters for future repairs. Parts that allow for clear torque procedures and accessible mounting points help technicians achieve correct clamping force and alignment, which supports reliable performance and reduces the chance of rework.
How We Chose the Best Acura TLX Wheel Hub Assembly
Our selection focused on parts that provide reliable service for the Acura TLX while minimizing premature bearing wear and fitment problems. We prioritized assemblies with strong bearing tolerance and sealed designs that resist contaminants, as these aspects have the biggest impact on longevity in everyday driving. Mounting integrity and correct stud pattern were essential filters because poor fitment leads to installation issues and safety risks. We also examined material quality for the hub flange and the durability of corrosion-resistant finishes, since structural strength matters for absorbing road loads.Additional criteria included compatibility with factory ABS sensor interfaces and ease of installation, which reduces the chance of installation-related failures. We excluded kits that lack complete mounting hardware or do not explicitly match Acura TLX specifications. We did not consider items sold only as bearings without the hub assembly, since integrated assemblies reduce labor and alignment risk. Overall, we filtered for durability, precise bearing play, correct fitment, sealed protection, ABS compatibility, and installation readiness.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common signs the Acura TLX wheel hub assembly needs replacement?
Common signs include persistent wheel vibration, rumbling or grinding noises from the wheel area, uneven tire wear, and looseness or play felt in the steering wheel. Some drivers also notice ABS warning lights if the hub's tone ring or sensor interface is failing. These symptoms often appear gradually and may worsen with speed or load.
Can I replace just the bearing instead of the entire hub assembly on an Acura TLX?
In some cases bearings can be serviced separately, but modern designs often use integrated assemblies where the bearing is pre-pressed into the hub. Replacing the entire assembly is usually simpler and reduces the risk of incorrect press-fit or contamination during installation. The best choice depends on the specific hub design and available tools.
How long does a wheel hub assembly typically last in regular driving?
Lifespan varies with driving conditions, but assemblies often last many tens of thousands of miles under normal use. Exposure to heavy moisture, road salt, or frequent impacts can shorten service life. Regular inspections for play, noise, and seal condition help identify wear before it becomes a safety issue.
Will a failing hub assembly affect braking or ABS performance?
Yes, a compromised hub assembly can impact braking by increasing rotor runout and causing uneven pad contact. If the hub assembly includes the ABS tone ring or sensor interface and it is damaged, wheel speed signals may be incorrect, which can trigger ABS warnings or affect braking modulation. Maintaining correct hub function supports reliable braking behavior.
Are there installation steps that reduce the chance of premature hub failure?
Proper torqueing of mounting fasteners, using the correct hub nuts, and following manufacturer torque sequences help avoid excess preload or looseness. Ensuring the mounting surface is clean and free of corrosion improves seating, and using thread locking where specified prevents fastener back-off. These practices reduce the chance of installation-related failures.
Conclusion
When selecting a wheel hub assembly for an Acura TLX, prioritize bearing precision, correct fitment, and robust sealing to maximize durability and maintain steering and braking performance. Balance material strength and ABS compatibility with installation ease to reduce risk of fitment issues and future service headaches.Ultimately, pick an assembly that meets the vehicle's mounting and sensor interfaces and offers proven sealing and bearing tolerance. That approach minimizes downtime and helps ensure consistent, safe operation over the long term.
Explore More:
- Check out all Acura TLX parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
