Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Nissan Murano feels floaty, bounces excessively, or transmits more road noise, the right shock absorbers can make a noticeable difference in daily driving comfort and safety. Choosing the correct shocks matters because they control body motion, influence braking stability, and maintain tire contact with the road. This guide presents seven shortlisted options that address common Murano ride issues and focuses on durability and damping performance.Below you will find the top picks selected for common driving conditions and maintenance needs, along with the criteria we used to evaluate them.
Looking for other parts? See all Nissan Murano parts & accessories.
Top Picks at a Glance
1. TRQ Rear Shock Absorber Set for 2009–2023 Nissan Murano
| Auto Part Position | Rear |
|---|---|
| Quantity | 2 Piece |
| Automotive Fit Type | Vehicle Specific Fit |
| Material | Metal |
This TRQ rear shock absorber set replaces both left and right rear shocks on a 2009–2023 Nissan Murano to restore ride control and damping. Designed as vehicle-specific direct replacements, the pair installs like factory-quality units and is typically used to stop rear-end bounce, reduce vibration, and improve stability when cornering or carrying passengers. Notable features include pre-assembled components for simpler installation and TRQ’s DIY video resources to guide first-time installers. In practice the shocks soften harsh impacts and return the car to a composed stance, improving comfort on rough roads and promoting more even tire wear. Some users report a firmer-than-original feel while others praise a smoother, factory-like ride, and a few reports indicate early failure on isolated units. Expect generally solid performance and easier fitment compared with generic universal shocks, but be aware that longevity can vary and occasional defective items have been reported.
Best for: Reliability-focused buyers who prioritize restoring factory-like ride and stability with a direct-fit replacement and prefer parts backed by installation guidance and a large aftermarket catalog.
Less Ideal for: Drivers seeking performance-tuned or heavy-duty off-road shocks should look elsewhere since this set targets factory replacement ride quality.
- Direct-fit rear replacement specifically for 2009–2023 Nissan Murano for simpler installation
- Sold as a matched two-piece set so both rear sides are updated at once
- Pre-assembled components and supporting installation videos reduce time and installation guesswork
- Claims factory-quality fit and components that improve ride stability and reduce vibration
- Some customers reported premature failures or defective units in isolated cases
- Ride character reported inconsistently between firmer-than-original and softer-than-original across users
Verdict A convenient, vehicle-specific rear shock pair that restores Nissan Murano rear ride and handling for buyers focused on reliable, factory-style replacement.
2. Complete Struts Front Complete Strut Assemblies with Coil Springs and Rear Shock Absorbers – Set of 4
| Fitment | Nissan Murano 2009-2014 |
|---|---|
| Quantity | 4 Units |
| Includes | Front complete struts with coil springs and rear gas shock absorbers |
This kit supplies a ready-to-install pair of front complete struts (with coil springs) and a pair of rear gas shock absorbers so you can replace all four corners at once. It is typically used by DIYers or independent shops to restore ride height, damping and reduce noises from worn struts without having to rebuild components. Notable features include vehicle-specific top mounts, polyurethane spring isolators to reduce noise, cold-rolled coil springs engineered to restore original height, and twin-tube struts with hydraulic oil and nitrogen for consistent damping. The practical benefit is a quicker, lower-effort suspension refresh since the fronts arrive fully assembled and the kit targets direct fitment for Nissan Murano 2009–2014. Important limitations are variable build quality reported by some users and occasional fitment details like brake-line mount angle that may require minor adjustment during installation; an alignment after installation is still required to reset suspension geometry.
Best for: Buyers who prioritize convenience and want a straightforward, time-saving way to refresh the suspension on a Nissan Murano 2009–2014 without rebuilding parts individually.
Less Ideal for: Shoppers seeking premium or performance-tuned suspension or those who need guaranteed long-term durability should consider higher-end branded or dealer-specified alternatives.
- Complete front struts arrive fully assembled for faster installation
- Vehicle-specific top mounts and spring isolators reduce noise and vibration
- Coil springs engineered to restore factory ride height
- Includes both front and rear units so you can replace all four corners at once
- Some customers report inconsistent build quality and early failures
- Minor fitment issues such as brake-line mount angle may require on-vehicle adjustment
Verdict A convenient, all-in-one replacement kit for Murano owners who want a quick, direct-fit suspension refresh but may face variable quality and occasional minor fitment tweaks.
3. AutoShack Front Complete Strut & Rear Shock 4‑Piece Kit for 2003–2007 Nissan Murano
| Fitment | 2003-2007 Nissan Murano All Trims |
|---|---|
| Bundle contains | 2 Front complete struts and 2 Rear shocks |
| Standards | Manufactured to ISO/IATF 16949 |
| Finish | Rust Protected |
This AutoShack 4-piece kit supplies two fully assembled front struts and two rear shock absorbers engineered to directly replace worn units on 2003–2007 Nissan Murano models. The front assemblies arrive prebuilt with coil springs, mounts, boots, bumpers and isolators so installation is faster than assembling parts separately, while the rear shocks are rust-protected to resist corrosion. In use the kit aims to restore stable handling, reduce bouncing and improve braking control compared with worn components. It is manufactured to ISO/IATF 16949 standards, which suggests consistent production quality across parts. Downsides to expect are that ride comfort is not as refined as premium-brand dampers and a few users reported slight differences between shock units in appearance or damping feel. The bundle is intended for professional installation and carries a limited six-month warranty, so expect a basic coverage window and possible need to upgrade if you want long-term premium comfort.
Best for: Performance-oriented buyers who prioritize restoring handling and steering control on a Nissan Murano and prefer a direct-fit replacement that simplifies installation and returns predictable on-road behavior.
Less Ideal for: Drivers seeking the softest, luxury-level ride or long-term premium damping should consider higher-end shock and strut brands instead.
- Front struts arrive fully assembled with springs, mounts and isolators for faster installation.
- Rust-protected finish on struts and shocks helps resist corrosion in wet climates.
- Vehicle-specific fit for 2003–2007 Nissan Murano reduces fitment guesswork.
- Manufactured to ISO/IATF 16949 production standards for consistent part quality.
- Ride damping is firmer and less refined than higher-end aftermarket shocks.
- Warranty coverage is limited to six months.
- Some buyers reported minor mismatches between shock units in appearance or feel.
Verdict A practical, vehicle-specific strut and shock kit that restores Murano handling affordably, but riders seeking plush comfort or long warranty coverage may prefer premium alternatives.
4. PM Auto Pair of 2 Rear Complete Shock Absorber Kit for Nissan Murano
| Brand | PM Auto |
|---|---|
| Position | Rear |
| Model | APM6002180 |
This PM Auto rear shock absorber kit replaces the factory rear dampers on Nissan Murano models from 2009 through 2024. It is sold as a pair and designed for straightforward replacement during routine suspension repair or while refreshing worn rear shocks. The listing emphasizes fit accuracy and the kit arrives as a complete unit ready for installation, which simplifies work for DIYers and independent shops. Buyers will appreciate the low-cost positioning that makes it practical to replace both sides at once without a big parts bill. Limitations include that this is an aftermarket budget brand rather than a premium supplier, so long-term durability and ride tuning may not match higher-end shocks. Also, confirm vehicle fitment notes carefully before purchase since fitment claims are model-specific. For drivers wanting an economical, serviceable rear shock replacement for a Murano, this kit covers the basics with minimal fuss.
Best for: Budget-conscious owners seeking an affordable, no-frills replacement to restore rear ride control on a Murano without paying for premium-brand parts.
Less Ideal for: Drivers looking for performance-tuned damping, extended durability for heavy towing, or OEM-equivalent ride refinement should consider higher-end or factory-quality replacements instead.
- Sold as a complete pair for replacing both rear shocks at once
- Advertised as direct-fit for 2009–2024 Nissan Murano which simplifies selection
- Low-cost option that makes full rear suspension refresh affordable
- Comes ready for installation as complete shock assemblies
- Aftermarket budget brand so longevity and damping sophistication may be below premium alternatives
- Fitment must be double-checked against vehicle notes to avoid compatibility errors
Verdict A practical, low-cost rear shock kit for Nissan Murano owners who need an affordable, ready-to-install replacement rather than premium performance.
5. AUTOMUTO Complete Strut Spring Assembly Set for Nissan Murano (Front & Rear, Set of 4)
| Vehicle Service Type | 2003 2004 2005 2006 2007 for Nissan Murano |
|---|---|
| Style | Complete Strut Spring Assemblies |
| Auto Part Position | Front, Rear |
| Manufacturer | AUTOMUTO |
| Model | struts |
This AUTOMUTO kit supplies four complete strut spring assemblies—front and rear left and right—preassembled with coil springs, mounts, boots, and bump stops to replace worn Murano struts quickly. Installers will appreciate that the units arrive fully loaded so you do not need to transfer springs or mounts from the old struts; that makes a garage or DIY swap faster and safer. The assemblies are built to meet or exceed factory specifications according to the manufacturer and are intended to reduce body bounce, absorb road impacts, and improve steering stability. Practical benefits include easier installation, immediate improvement in ride comfort for a high-mileage vehicle, and parts coverage for all four corners in one purchase. Limitations to expect are that aftermarket quality can vary from OEM level and long-term durability may be lower than premium branded struts, so longevity is less certain on high‑use vehicles.
Best for: Risk-averse mainstream buyers who prioritize restoring safe, comfortable daily driving on a 2003–2007 Nissan Murano without complex parts sourcing or lengthy shop labor.
Less Ideal for: Drivers seeking top-tier performance dampers or longest possible service life should consider premium branded or performance-oriented replacement options instead.
- Full set of four complete assemblies reduces installation time by avoiding spring transfer
- Sold as vehicle-specific fit for 2003–2007 Nissan Murano which simplifies ordering
- Preassembled components include mounts, boots, and bump stops for a ready-to-install solution
- Designed to meet or exceed factory specifications for improved ride comfort and stability
- Aftermarket construction may not match longevity or refinement of higher-end OEM or premium-brand struts
- Some buyers have reported occasional shipping damage or quality-control issues
Verdict A convenient, vehicle-specific complete strut kit that brings quick ride and stability improvements to older Nissan Murano models, with typical aftermarket durability considerations.
6. KAX Front Complete Strut Assembly for Nissan Murano (2009–2014)
| Fitment | Nissan Murano 2009-2014 |
|---|---|
| Position | Front |
| Manufacturer Part Number | 6572SAA833SUS |
| OEM Reference Numbers | 172606, 172607, SR4280, SR4281 |
This KAX front strut assembly is a bolt-on replacement engineered specifically for the Nissan Murano (2009–2014). It arrives as a complete unit—shock absorber, coil spring, upper mount, and dust boot—so you can replace the factory front strut without sourcing separate parts or doing a spring compression job. The gas-charged damper and high-tensile spring aim to reduce heat buildup and support heavier loads compared with basic hydraulic units, and a triple-lip seal plus PTFE-coated piston rod are intended to limit noise and resist corrosion in wet conditions. For a practical owner this kit cuts installation time and restores ride control and front-end support at a lower cost than many brand-name assemblies. Expect variable long-term durability across units based on user reports, so plan for inspection after installation and consider professional alignment. This is a cost-focused upgrade that improves function and convenience but is not positioned as a premium, lifetime shock solution.
Best for: Practical optimizers who want a cost-effective, ready-to-install front strut that restores ride control and saves workshop time on a Nissan Murano 2009–2014.
Less Ideal for: Drivers seeking a top-tier performance or long-life factory-quality replacement should consider higher-end branded or dealer parts instead.
- Pre-assembled complete strut saves significant installation time compared to buying parts separately
- Designed specifically for Nissan Murano 2009–2014 for direct bolt-on fitment
- Gas-charged damper and high-tensile spring for better heat management and heavier load support
- Sealing and PTFE coating reduce road noise and help resist corrosion in wet or snowy conditions
- Mixed user reports on durability and premature sagging mean longevity may vary
- Not marketed as a premium or professional-grade performance strut
Verdict A budget-friendly, pre-assembled front strut for Nissan Murano 2009–2014 that speeds installation and restores function but may show variable long-term durability.
7. Detroit Axle 8pc Suspension Kit — Front Struts with Coil Springs, Rear Shocks and Sway Bar Links for 2009–2013 Nissan Murano (FWD)
| Vehicle Fitment | 2009-2013 Nissan Murano (FWD) |
|---|---|
| Kit Contents | 2 front struts with coil springs, 2 rear shock absorbers, 4 sway bar end links |
| Material | Steel or Aluminum |
| Manufacturer Part Number | 8AQS47401 |
This Detroit Axle 8-piece kit is designed as a one-stop replacement for worn suspension on 2009–2013 Nissan Murano FWDs, supplying two preassembled front struts with springs, two rear shocks, and four sway bar end links. Because the front struts come factory preassembled, installation is faster and safer for DIYers and small shops since you do not need a spring compressor. Detroit Axle reports impact and fatigue testing and the parts aim to match factory fitment and mounting points, which reviewers say improves ride quality and reduces front-end noises and body roll. Practical benefits include restoring ride height and cornering confidence without buying individual components, and the included sway bar links make it sensible to refresh the whole system at once. Important limitations: some buyers note a slightly firmer feel than original equipment and a small number of fitment hiccups on non-matching vehicles, so confirm compatibility with the Murano FWD. The kit is marketed with a long warranty and replaces several OEM part numbers, but heavier-than-stock springs may change ride characteristics for drivers who prefer the softest original feel.
Best for: Balanced all-round buyers who want a full, practical suspension refresh for a 2009–2013 Nissan Murano FWD and value a mix of DIY-friendly installation and factory-style fitment.
Less Ideal for: Drivers seeking an exact factory-soft ride feel or high-performance tuning should consider alternative springs or specialty dampers instead.
- Complete 8-piece kit replaces front struts, rear shocks, and all sway bar end links for a coordinated refresh
- Front struts arrive preassembled with coil springs for faster, safer installation without a spring compressor
- Designed to match factory mounting points and OEM part numbers for direct fit on 2009–2013 Murano FWD
- Testing claims for impact, wear, and fatigue suggest attention to durability
- Some owners report a firmer ride compared with original suspension
- A minority of buyers experienced fitment or assembly issues that required adjustments
Verdict A convenient, DIY-friendly full suspension kit that restores handling and ride for 2009–2013 Murano FWDs, with slightly firmer feel than some factory units.
Choosing the Right Nissan Murano Shock Absorber: Key Factors to Consider
Damping Characteristics
Damping determines how the shock absorber controls compression and rebound when the vehicle meets bumps or changes direction. Consistent damping helps maintain tire contact with the road, which improves braking and steering response.
Different damping profiles favor comfort or sportier handling. For a Nissan Murano, look for shocks that offer predictable mid-speed damping to smooth common road imperfections while still resisting large compressions during cornering or heavy loads. Avoid units with overly soft or excessively firm damping that could cause instability or harsh ride quality.
Fitment And Mounting
Correct fitment ensures the shock absorber mounts securely and works with the vehicle s existing suspension geometry and bump stops. Proper top mounts, bushings, and lower eyelet or stud designs reduce noise and prevent premature wear.
Using a shock specified for the Murano s front or rear position reduces the chance of binding, misstroke, or unexpected handling changes. Confirming fitment also minimizes installation hassles and reduces the risk of loose hardware that can cause shock absorber noise or rattles.
Build Quality And Corrosion Resistance
Materials, seals, and protective coatings directly affect how long a shock will function as intended in real-world road conditions. Good plating, high-quality seals, and durable piston rods reduce the risk of fluid leaks and surface pitting, which degrade damping performance.
In regions with road salt or moisture, corrosion resistance is especially important because rusted bodies or mounts can shorten service life. Solid construction also contributes to consistent performance under repeated cycling and reduces the likelihood of needing early replacement.
Service Life And Maintenance
Shock absorbers are wear items that gradually lose effectiveness. Expected service life depends on driving conditions, load, and build quality. Choosing units with proven longevity reduces frequency of replacement and long-term maintenance costs.
Consider whether replacement parts, such as top mounts or bushings, are available separately. Easy serviceability and clear replacement intervals make it simpler to keep the suspension operating properly and to replace worn shocks at the right time to avoid secondary wear to tires and other suspension components.
Ride Comfort Versus Handling Tradeoffs
There is often a compromise between a cushioned ride and sharp handling. Softer valving improves comfort over rough pavement but can increase body roll and reduce steering precision. Firmer valving sharpens response but may transmit more jolts into the cabin.
Decide which outcome matters more based on your driving style and typical roads. For daily commuting and long-distance comfort, prioritize mid-range damping and compliance. For more responsive handling, select shocks designed to resist excessive compression without becoming unacceptably harsh.
Noise And NVH Considerations
Noise, vibration, and harshness can change noticeably when shock absorbers are worn or when replacement units do not match the vehicle s NVH expectations. Internal valving, bushings, and mounts all influence the amount of transmitted noise.
Selecting shocks with quality bushings and well-sealed construction limits squeaks, clunks, and hydraulic thumps. Pay attention to mounting hardware and torque specifications during installation to avoid introducing new noise sources that can be mistaken for shock absorber problems.
FAQ
What are common signs of bad shocks on a Nissan Murano?
Common signs often include excessive bouncing after hitting a bump, increased body roll in turns, and longer stopping distances under hard braking. You may also notice uneven tire wear patterns and more pronounced road noise during normal driving. These symptoms usually develop gradually, so comparing ride feel before and after replacement can help confirm the diagnosis.
How long do shock absorbers typically last on a crossover like the Murano?
Shock absorber life varies with driving conditions, mileage, and build quality, but they commonly last many tens of thousands of miles under normal use. Rough roads, heavy loads, and exposure to corrosive elements shorten life. Regular inspection for fluid leaks, damaged seals, or degraded bushings helps identify when replacement is needed.
Should I replace front and rear shock absorbers at the same time?
It often makes sense to replace shocks in pairs on the same axle to maintain balanced damping and consistent handling. Replacing only one shock can lead to uneven response and potential differences in tire wear. If front and rear units show similar wear, coordinating replacements provides a more consistent steering and ride feel.
Can worn shock absorbers cause other car handling problems?
Yes, worn shocks can contribute to several handling issues including reduced steering precision, increased body roll, and instability during lane changes. They can also affect braking stability by allowing weight transfer to be less controlled. Addressing worn shocks promptly helps preserve tire life and overall vehicle control.
Will replacing shocks reduce shock absorber noise and vibrations?
Replacing worn or damaged shocks often reduces hydraulic thumps and excessive vibration because new units restore proper damping and seal integrity. However, some noises may stem from mounts, bushings, or other suspension components. Inspecting related hardware during replacement helps ensure the source of noise is resolved.
Is specialized equipment needed to replace shocks on a Nissan Murano?
Basic shock replacement typically requires standard hand tools, a jack, and proper supports, but some installations may benefit from a spring compressor or specific torque tools depending on the mount design. Following manufacturer torque specs and safe lifting procedures helps ensure a correct and secure installation.
How We Chose the Best Nissan Murano Shock Absorber
We selected shock absorbers for the Nissan Murano by focusing on performance characteristics and long-term ownership concerns specific to this crossover. Key evaluation criteria included damping consistency across varied road surfaces, build quality and corrosion resistance, and compatibility with the Murano s suspension geometry. We also weighed expected service life and the unit s resistance to fade under repeated compression and rebound cycles, plus the quality of seals and mounting hardware.We excluded units that lacked clear vehicle fitment data or used ambiguous construction materials. We also filtered out options that rely only on universal fit claims without specific considerations for the Murano s front and rear suspension loads. The final list favors products that balance ride comfort with control, offer reliable sealing and finish to resist road corrosion, and provide predictable damping behavior for everyday driving and occasional spirited use.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing shock absorbers for a Nissan Murano, prioritize fitment, consistent damping, and corrosion-resistant construction. Those factors most directly affect ride comfort, handling, and service life.Balance the tradeoff between comfort and responsiveness based on your driving habits and typical road conditions. Regular inspections and replacing worn shocks in coordinated pairs will help maintain stable handling and extend the life of related suspension components.
Explore More:
- Check out all Nissan Murano parts & accessories
- Explore Shock Absorbers Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
