Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing a worn engine mount can noticeably reduce vibration, prevent extra drivetrain wear, and restore a smoother ride in your Nissan Murano. Picking the right mount matters because fit, material, and mounting geometry affect how well the engine is isolated and how long the repair lasts. This guide covers the top shortlisted engine mounts for the Nissan Murano and explains the evaluation criteria we used, including build quality and fitment accuracy. Read on to find mounts that match your needs and the considerations to keep in mind when deciding on a replacement.
Looking for other parts? See all Nissan Murano parts & accessories.
Top Picks at a Glance
1. TRQ Front Right Engine Torque Strut Mount (Passenger Side)
| Brand | TRQ |
|---|---|
| Model | TRQ MTA34519 Engine Torque Strut Mount |
| Manufacturer Part Number | MTA34519 |
| Fitment note | Front Passenger Side compatible with Nissan Murano 2009-2014 |
This TRQ torque strut mount replaces the passenger-side front engine mount and is intended as a direct-fit factory-quality replacement for compatible Nissan and Infiniti V6 models including the Murano. It arrives pre-assembled with a machined exterior and is used to stabilize the engine, reduce vibration and control engine movement under acceleration and deceleration. For a reliability-focused buyer the appeal is straightforward: the part mirrors original fitment, simplifies DIY installation, and includes TRQ support resources and installation videos to guide the job. Practical benefits include a precise fit that avoids modification, restored engine alignment that reduces drivetrain wear, and reduced cabin vibration compared with a failed mount. Limitations are that this is a single replacement part so confirm exact fitment for year and side before purchase and professional installation may be preferable if you lack tools or access to lifts. The product is aimed at a straightforward, no-frills replacement rather than an upgraded performance mount.
Best for: Reliability-focused buyers who prioritize restoring factory-like operation and minimizing downtime through a direct replacement part and clear installation guidance.
Less Ideal for: Drivers seeking performance-oriented or heavy-duty mounts for motorsport or high-torque modifications should consider purpose-built alternatives.
- Direct-fit design for passenger-side front torque strut to match factory replacement fit.
- Pre-assembled component reduces installation time and need for modifications.
- Machined exterior and parts from a brand that provides DIY installation videos and guidance.
- Sold as a single passenger-side unit so matching or replacing other mounts may be required to fully address vibration.
- Not marketed as an upgraded performance or heavy-duty mount compared with specialty aftermarket options.
Verdict A straightforward, factory-quality passenger-side torque strut mount for restoring engine stability and reducing vibration on compatible Murano models.
2. Kepler Front and Rear Engine and Transmission Mount Kit for Nissan Murano 3.5L (2003–2007)
| Compatible vehicle | 2003–2007 Nissan Murano V6 3.5L AWD |
|---|---|
| Set contents | Front motor mount, front right motor mount, rear motor mount, transmission mount |
| Finish | Powder Coated |
| Manufacturer | Kepler |
This Kepler mount kit supplies the front, front right, rear engine mounts and a transmission mount as a one-stop replacement for a 2003–2007 Nissan Murano V6 AWD. It is powder coated and marketed for improved temperature and wear resistance with an anti-corrosion finish, so the parts arrive ready to install or store without immediate surface rust concerns. Typical use is to eliminate vibration, clunks, and excessive engine movement caused by aged mounts; replacing all mounts at once helps restore factory alignment and reduces repeat labor. Buyers report the parts look very similar to factory units and can solve idle vibration and driveline shudder when they fit correctly. Limitations include the usual fitment sensitivity of aftermarket kits — some buyers needed patience during installation and one report noted missing fasteners, so expect to verify hardware and part numbers before starting the job. This kit suits a DIYer or technician who wants a full replacement set at once rather than sourcing individual pieces.
Best for: A convenience-driven buyer who wants a single kit to replace all worn mounts at once and minimize repeat trips to parts suppliers or the shop.
Less Ideal for: Those seeking OEM-branded factory mounts or a mount-by-mount, professional-grade billet solution should consider alternatives tailored to performance or exact factory specification.
- Complete four-piece kit replaces engine and transmission mounts together to avoid repeat labor
- Powder coated finish for corrosion resistance and longer shelf life
- Designed specifically for 2003–2007 Nissan Murano V6 AWD fitment which simplifies selection
- Multiple users report the kit stops vibration and restores normal engine stability
- Some installers report tight or difficult fit during replacement, requiring extra manipulation or jacking
- Does not include vehicle-specific fasteners in all cases so you may need to reuse or source bolts separately
- One reviewer reported a failed unit on a different vehicle, indicating occasional quality variance
Verdict A convenient, full replacement kit for 2003–2007 Murano owners that can stop vibration and save time, with occasional fitment or hardware caveats.
3. CNYGO 6-Piece Engine and Transmission Mount Set for Nissan Murano 3.5L V6 (2009–2014)
| Compatibility | 2009-2014 Nissan Murano 3.5L V6 AWD |
|---|---|
| Unit Count | 6.0 Count |
| Manufacturer | rao jintang |
This six-piece mount kit replaces the motor and transmission mounts on a 2009–2014 Nissan Murano 3.5L V6 AWD to restore engine stability and reduce vibration. It includes the front right motor mount, two main motor mounts, torque strut mounts, an upper torque mount, and the transmission mount so you can replace all worn points at once rather than swapping parts piecemeal. The parts are described as alloy with rubber isolators, which should provide a firmer, longer-lasting connection than older degraded mounts and help cut engine movement under load. Installation is intended as a direct factory-quality replacement for the listed part numbers and typically requires basic to intermediate mechanical skill and common tools. Expect a quieter, more composed feel after replacing worn mounts, though you should confirm part numbers before purchase and factor in alignment and labor if you are not doing the work yourself. The kit is practical for a comprehensive repair but may be more than needed if only a single mount is failing.
Best for: Performance-oriented Murano owners who prioritize restoring tight engine control and reducing drivetrain movement for a firmer, more responsive feel.
Less Ideal for: Buyers looking for a single, inexpensive replacement mount or a quick temporary fix should consider individual mounts instead of a full kit.
- Complete six-piece set lets you replace all engine and transmission mounting points at once
- Designed to match factory part numbers for direct fit on 2009–2014 Murano 3.5L V6 AWD
- Alloy construction with rubber isolators aimed at durability and reduced vibration
- Includes both motor and torque strut mounts so driveline movement under load is minimized
- No torque specifications or installation instructions included in the listing, so professional installation or a repair manual may be needed
- Kit may be unnecessary if only one mount is worn, increasing cost and waste
Verdict A full OEM-style replacement kit that restores engine stability and reduces vibration for performance-focused Murano owners who want a comprehensive repair.
4. LDCRE Engine Motor Mount Bracket for Nissan 3.5L V6 (fits Murano, Maxima, Altima, Pathfinder, Infiniti QX60/JX35)
| Mounting Type | Engine Mount |
|---|---|
| Unit Count | 3.0 Count |
| Included Components | Mounting Hardware |
| Finish Type | Metal |
This LDCRE engine motor mount bracket replaces factory mounting brackets for Nissan and Infiniti 3.5L V6 applications and is intended as a direct-fit replacement for vehicles like the Murano. It secures the engine to the subframe, helps maintain alignment, and reduces vibration and noise for a smoother ride. The bracket ships with mounting hardware and is described as metal construction, which should provide the basic durability needed for daily driving and routine use. Installation is typical for an engine mount bracket and will usually require basic hand tools and an engine support to safely transfer load while swapping the part. As a budget-focused aftermarket part, it delivers the core function without premium features such as enhanced vibration isolation or advanced corrosion coatings. Buyers should plan for professional installation if they lack experience and inspect fit and torque specs during install because finish and long-term corrosion resistance may vary compared with higher-end factory-quality replacements.
Best for: Budget-conscious owners prioritizing an affordable, functional replacement that restores engine mounting and reduces vibration without paying for premium refinements.
Less Ideal for: Drivers seeking the longest-term corrosion resistance or upgraded vibration isolation should consider higher-end or factory-quality alternatives instead.
- Direct-fit replacement for Nissan/Infiniti 3.5L V6 engine mounts, simplifying installation.
- Includes mounting hardware so you have the basic parts needed to install.
- Metal construction provides fundamental strength for regular driving loads.
- Lacks advertised advanced corrosion protection or vibration-damping features found on premium replacements.
- Appearance and finish quality may be variable compared with factory-quality brackets.
Verdict A cost-focused, direct-fit engine mount bracket that restores engine support and reduces vibration for Murano owners who want an affordable repair.
5. A-Premium 5‑Piece Engine Mount and Torque Strut Mount Kit for Nissan Murano/Pathfinder/Infiniti QX60 (3.5L)
| Vehicle Fitment | Nissan Murano 2015-2022 (V6 3.5L AWD) and compatible Infiniti/Nissan models |
|---|---|
| Package Included | Front motor mount, front right motor mount, rear motor mount, front right torque strut, rear torque strut |
| Manufacturer | PremiumpartsWhosale |
| Item model number | 112703JA0B, 113603KA0A |
This five-piece kit replaces the front, front right, rear motor mounts and two torque strut mounts to restore engine stability and reduce vibration in affected 3.5L AWD Nissan and Infiniti models. It is typically used when original mounts are cracked, leaking, or causing excess noise and engine movement during acceleration and shifting. The listing emphasizes parts tested to meet factory-quality specifications and the kit includes all five mounting pieces needed for a common repair job, which simplifies installation and avoids sourcing individual parts. Practical benefits include refreshed engine alignment, reduced drivetrain stress, and a one-year unlimited-mileage guarantee for peace of mind. Important limitations: the kit is specific to certain model years and AWD/4WD configurations so fitment must be confirmed, and as an aftermarket replacement some buyers may notice small differences from factory parts in fit or finish. Installation may require moderate mechanical skill or a shop for safe, correct replacement.
Best for: Practical, risk-averse buyers looking to restore factory-like engine stability on their Nissan Murano without hunting for individual parts and who prioritize a bundled, covered replacement.
Less Ideal for: Buyers seeking exact factory-original parts from a dealer or those who prefer to replace only a single mount rather than a full multi-piece kit should consider alternatives.
- Complete five-piece kit covers common engine mount points so you can replace all failed mounts at once.
- Marketed as tested to meet factory-quality specifications, offering a closer match to OEM performance than generic singles.
- Includes both motor mounts and torque strut mounts, reducing drivetrain vibration and engine movement when installed.
- One-year unlimited-mileage guarantee provides added confidence after installation.
- Fitment is limited to specific model years and AWD/4WD configurations and must be verified before purchase.
- As an aftermarket kit, finish and exact fit may differ subtly from factory parts, sometimes requiring minor adjustments during installation.
Verdict A convenient five-piece aftermarket kit for Murano owners wanting a bundled, tested replacement to reduce vibration and restore engine stability.
6. A-Premium Engine and Transmission Mount Kit for Nissan Murano (2003–2007) — 4‑Piece
| Vehicle fitment | Nissan Murano 2003-2007 V6 3.5L FWD Automatic |
|---|---|
| Set contents | 4-PC Set: front, front-right, rear motor mounts and transmission mount |
| Manufacturer part number | APEM799 |
| Reference numbers | Multiple OEM reference numbers listed |
This A-Premium kit replaces the front, front-right, rear engine mounts and the transmission mount on Nissan Murano 2003–2007 V6 3.5L FWD automatic models. It is intended for installers who need a full mount refresh in one purchase rather than sourcing individual pieces. The listing notes the parts are manufactured to meet or exceed factory-quality specifications and the kit is offered with a one-year unlimited-mileage quality guarantee. In practice the set simplifies repairs after mount failure or when refreshing aged mounts, and the multiple reference numbers make it easy to confirm fitment for the specified Murano models. Limitations to consider are that the kit is an aftermarket replacement so long-term durability can vary compared with original factory parts and professional installation is recommended for correct alignment and torque. The set is best used when multiple mounts are due for replacement to restore engine stability and reduce vibration.
Best for: Practical optimizers who prioritize replacing all worn mounts at once to get the Murano back to a smooth, dependable daily driving experience without hunting for individual parts.
Less Ideal for: Buyers looking for an exact factory-sourced part or those who only need a single mount replaced and prefer purchasing individual OEM pieces.
- Complete four-piece kit covers front, front-right, rear engine mounts and transmission mount for a one-stop replacement
- Marketed to meet or exceed factory-quality specifications which simplifies selection against OEM references
- Includes multiple reference numbers to help verify fitment for 2003–2007 Nissan Murano 3.5L FWD automatic
- One-year unlimited-mileage quality guarantee provides short-term coverage for defects
- Aftermarket construction means long-term durability may differ from factory-original mounts
- Requires professional installation to ensure proper alignment and torque during replacement
Verdict A convenient, cost-effective full mount kit for Murano owners who want to replace all engine and transmission mounts at once rather than source individual parts.
7. LOONGRIE Engine and Transmission Mount Kit for Nissan Murano (3.5L V6)
| Finish Type | Powder Coated |
|---|---|
| Set Name | Engine and Transmission Mount Set |
| Manufacturer | loongrie |
| Size | A7394 A7395 A4365HY A4373 A7383 A7386 |
| Part Number | LG088 |
This LOONGRIE kit supplies the engine and transmission mounts used to secure a 3.5L V6 AWD powertrain in Nissan Murano and compatible Infiniti models. It is sold as a set intended for full replacement during a mount service and includes powder coated brackets for corrosion resistance. In real-world use the parts aim to restore factory mounting support so vibration and drivetrain movement are reduced after worn mounts are removed. Buyers report generally good fit and straightforward installation when the correct reference numbers are selected, which makes it practical for DIY mechanics and independent shops. There are mixed reports on rubber hardness and long-term durability versus factory parts, so expect variability between batches. The seller provides part numbers to match with vehicle references and recommends verifying fit with a parts lookup before ordering. This kit is useful for replacing tired mounts affordably but may not match factory longevity in every case.
Best for: Balanced buyers who want an affordable, full replacement mount kit that restores drivetrain stability and is suitable for DIY installation or an independent shop service.
Less Ideal for: Buyers seeking guaranteed factory-equivalent longevity or those who prefer dealer-sourced OEM parts for every repair should consider manufacturer parts instead.
- Complete set covers engine and transmission mounts so all worn mounting points can be replaced at once
- Powder coated finish helps resist corrosion for longer service life in under-hood conditions
- Includes manufacturer reference part numbers to simplify matching to 3.5L V6 Murano and related models
- Multiple buyers report good fit and straightforward installation for home or shop replacement
- Some buyers reported softer rubber compared with factory mounts, which may reduce long-term durability or change NVH characteristics
- A few reviews indicate missing or incorrect pieces in isolated shipments
Verdict A budget-friendly full mount kit that fits 3.5L V6 Murano models and restores drivetrain support, though some users report its rubber may be softer than factory parts.
Choosing the Right Nissan Murano Engine Mount: Key Factors to Consider
Fitment and Bolt Pattern
Correct fitment is the first priority when choosing an engine mount because misalignment can cause handling issues and accelerated wear. Confirming bolt hole spacing, stud locations, and clearance around adjacent components prevents installation surprises and reduces the chance of stress concentrations that lead to early failure.
A mount with accurate geometry also maintains drivetrain alignment, which affects transmission and axle loads. If a mount is even slightly off, it can change engine position under load and alter linkage angles, so prioritize mounts with documented fitment for the Nissan Murano or precise dimensional specifications.
Material and Durability
The elastomer or rubber compound and the metal core determine how long a mount will resist cracking, oil contamination, and heat. Higher-quality compounds tend to retain their damping characteristics better over time and under varying temperatures, which reduces the frequency of replacements.
Also consider corrosion-resistant metal components and protective coatings, since rusted brackets or studs can complicate future removal and reduce structural integrity. Choose mounts that specify resistant materials or treatments if you expect exposure to road salt or engine oil.
Vibration Damping Performance
Different mounts offer varying levels of vibration isolation, which directly affects cabin comfort and perceived refinement. Softer mounts typically reduce transmitted vibration better at idle and low RPM, while firmer mounts control engine movement under acceleration and cornering.
Think about your driving priorities: if you value a quiet cabin, prioritize mounts designed for greater damping. If you need tighter engine control for towing or spirited driving, a mount with firmer damping and better torque control may be preferable.
Torque Control and Load Capacity
Engine mounts must absorb torque reaction when the engine accelerates or decelerates. A mount with inadequate load capacity or poor torque-control features can allow excessive engine roll, which stresses other mounts and drivetrain components.
Look for mounts that describe their capacity to handle engine torque or include features like reinforced cores or hydraulic chambers that limit movement under load. Proper torque control preserves linkage geometry and reduces shock loads transmitted to the transmission and chassis.
Installation and Serviceability
Some mounts are straightforward replacements that use the factory mounting points and require only common tools, while others may need supporting brackets, hydraulic lift access, or temporary engine support. Consider how the installation method affects labor time and the likelihood of a DIY job versus professional service.
Also evaluate whether replacement requires transferring isolators or plates from the old unit, or if the new mount comes preassembled. Easier installation reduces the chance of installation errors that can compromise mount performance.
Warranty and Manufacturer Support
A clear warranty and accessible manufacturer support can signal confidence in product quality and back up long-term reliability. Warranties that cover material defects and premature failure provide some protection against early issues and help offset replacement hassle.
Check the terms for coverage duration and what conditions are excluded, such as damage from fluid exposure or improper installation. Good after-sales support also helps if fitment questions arise during installation.
FAQ
What are common symptoms of a failing engine mount?
Common signs include increased vibration at idle or while accelerating, clunking or banging noises when shifting or accelerating, and noticeable engine movement during load changes. You may also feel more vibration through the pedals or steering wheel. These symptoms often point to degraded damping or broken mount components.
Can I replace a Nissan Murano engine mount myself?
Whether you can DIY depends on your tools and experience. Some mounts are simple to replace with basic hand tools and a jack to support the engine, while others require access to the engine bay from below or special alignment tools. If you are unsure about supporting the engine safely, professional installation is advisable.
How long do engine mounts usually last?
Engine mount life varies with driving style and conditions, but they often last many years under normal use. Exposure to oil, heat cycles, and heavy loads can accelerate wear. Regular inspection for cracks, torn rubber, or excessive movement helps catch failing mounts before they cause additional drivetrain damage.
Will a worn engine mount cause other problems?
Yes, a degraded mount can increase stress on adjacent mounts, transmission mounts, and drivetrain components by allowing excessive engine movement. Over time this can lead to accelerated wear of bushings, strain on hoses and wiring, and misaligned linkages that affect shifting or steering feel.
What should I tell a mechanic when diagnosing mount issues?
Describe the symptoms you notice, such as vibration at idle, clunks under acceleration, or visible engine movement. Note when the issue occurs and any recent impacts or fluid leaks. Clear symptom descriptions help the technician focus the inspection on specific mounts and related components.
How We Chose the Best Nissan Murano Engine Mount
We selected mounts that prioritize correct fitment and reliable vibration isolation for the Nissan Murano. Primary evaluation criteria included mounting point alignment and dimensional accuracy to ensure bolt pattern and clearance match the vehicle. Durability factors covered rubber or elastomer compound quality and core material strength, because those determine long-term resistance to oil, heat, and fatigue. We also assessed load capacity and torque-control features, which affect how the mount handles engine thrust and transient loads. Ease of installation and whether the mount requires special tools or supporting brackets were considered, since some replacements are simple swaps while others need extra service steps. Finally, we looked at warranty coverage and manufacturer quality control as proxies for consistency. We excluded options that lacked clear fitment data for the Nissan Murano, mounts designed only for motorsport use, or units with unknown material specifications. The result is a shortlist focused on practical, vehicle-specific replacements that balance durability, fit, and serviceability.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Nissan Murano engine mount, prioritize correct fitment and material quality to ensure reliable vibration isolation and drivetrain alignment. Balance damping characteristics against torque-control needs based on how you drive, and factor in installation complexity and warranty when evaluating options. Careful selection helps avoid repeat service and keeps engine movement under control, protecting surrounding components and preserving ride comfort. Use the factors above to weigh tradeoffs and pick a mount that matches your durability and performance priorities.
Explore More:
- Check out all Nissan Murano parts & accessories
- Explore Engine
- Browse all Auto Parts
