Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
When a wheel hub assembly starts to fail on your Nissan Titan, you may notice vibration, noise, or less predictable steering. Choosing the right assembly matters because it affects wheel alignment, bearing life, and overall vehicle safety. This guide highlights seven shortlisted options that meet common durability and performance needs for that truck. We evaluated candidate assemblies for bearing quality, sealing against contaminants, and fitment reliability. The following selections focus on assemblies designed to restore smoothness and reduce common hub-related symptoms. Read on to see which features and specs matter most when replacing a hub assembly.
Looking for other parts? See all Nissan Titan parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | PHILTOP Rear Wheel Hub Bearing Assembly 512373 |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front Wheel Hub and Bearing Assembly (BHA54064) |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Front Wheel Bearing Hub Assemblies (2‑pc) for Nissan Titan XD 4WD |  |
| Best Budget The cheapest option that still gets the job done reliably | Torchbeam Front Wheel Bearing & Hub Assembly 515155 for 2012–2015 Nissan Titan/Armada with ABS |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium Front Wheel Hub and Bearing Assembly with ABS, 6-Lug |  |
| Best Value for Money The sweet spot between price and what you get | Detroit Axle Front Wheel Hub and Bearing Assembly Kit (pair) with ABS Sensor |  |
| Best Overall The best all-around choice for most situations | TRQ Front Wheel Bearing and Hub Assembly Set (2-Piece) for 2017–2023 Nissan Titan 4WD |  |
1. PHILTOP Rear Wheel Hub Bearing Assembly 512373
| Brand | PHILTOP |
|---|---|
| Material | 55# Steel and GCr15 Steel |
| Bearing Number | 512373 |
| Specification Met | ISO 16949 |
| Compatible Lubricant | Grease |
This PHILTOP wheel hub bearing assembly is a direct-replacement style rear hub designed to restore smooth wheel rotation and keep the wheel securely attached to the axle. It is typically used when a worn bearing causes noise, play, or wheel wobble; installation replaces the entire hub unit rather than rebuilding the bearing itself. The part is made from heat-treated steels, comes preassembled with grease, and is vehicle-tested for fit and function to factory-spec performance. In practice it should reduce noise and vibration and get a vehicle back on the road with minimal downtime because the unit installs quickly and does not require bearing packing. Limitations are that this listing is for a specific bearing number and fitment must be confirmed for the vehicle application, and long-term durability depends on correct installation and driving conditions rather than the part alone. The included customer feedback indicates consistent fit and satisfactory performance for owners who matched the correct application.
Best for: Reliability-focused buyers who prioritize restoring safe, factory-quality wheel function with a straightforward replacement part and want a practical, serviceable fix.
Less Ideal for: Buyers seeking a hub explicitly engineered or marketed for Nissan Titan performance upgrades or who prefer a manufacturer-specific OEM label should look elsewhere.
- Preassembled hub unit simplifies replacement and avoids bearing packing.
- Constructed from heat-treated steels for corrosion and wear resistance.
- Grease-compatible design and vehicle testing target reliable fit and quieter operation.
- Customer reports indicate consistent fit and straightforward installation.
- Fitment is specific to a bearing number so confirmation against the vehicle is required.
- Not engineered or advertised specifically for Nissan Titan applications in the listing.
Verdict A practical, preassembled replacement hub for restoring rear wheel function when the correct bearing-number fitment is confirmed.
2. TRQ Front Wheel Hub and Bearing Assembly (BHA54064)
| Material | Alloy Steel |
|---|---|
| Bearing Type | Taper |
| Compatible Lubricant | Grease |
| Wheel Stud Quantity | 6 |
| Anti Lock Braking System | Tone Ring with Sensor |
This TRQ front wheel hub and bearing assembly is a pre-assembled replacement designed to bolt into the factory location and restore wheel rotation, ABS sensing, and wheel stud mounting without modification. It includes the sensor and wheel studs so you can swap a worn or noisy hub quickly during a front-end repair. Typical use is a DIY or shop replacement when a bearing fails, the ABS tone ring or sensor is damaged, or wheel studs become worn. Notable practical features are the pre-installed ABS tone ring and sensor integration, included wheel studs, and TRQ's installation videos that walk through removal and torque steps. Benefits include faster installation, elimination of bearing press work, and a part that matches factory fit for a smooth, quiet roll when installed correctly. Limitations are mixed long-term durability reports from some users and the listing notes flange bolts are not included, so you may need to source hardware and follow correct torque and bed-in procedures for longevity.
Best for: Buyers who prioritize convenience and faster, DIY-friendly repairs and want a direct-fit replacement that minimizes shop time and specialized tools.
Less Ideal for: Drivers seeking an extended-factory-longevity OEM replacement or those unwilling to source missing flange hardware separately should consider dealer parts or a unit with included bolts.
- Pre-assembled unit reduces installation time and avoids bearing press work
- Built-in ABS tone ring and sensor for plug-and-play anti-lock braking integration
- Includes wheel studs to simplify reassembly and ensure correct stud fitment
- Company provides step-by-step installation videos to guide DIY repairs
- Flange bolts are not included which may require purchasing additional hardware
- Some reviewers reported premature failures and rust on a small number of units
Verdict A convenient, pre-assembled hub assembly that speeds DIY front-hub repairs for Nissan Titan but double-check included hardware and consider longevity concerns for heavy-duty use.
3. Detroit Axle Front Wheel Bearing Hub Assemblies (2‑pc) for Nissan Titan XD 4WD
| Fitment | 2016-2023 Nissan Titan XD (4WD) |
|---|---|
| Position | Front left and right |
| Lugs | 6 |
| ABS on Hub | Yes |
| Drive Type | 4WD |
These Detroit Axle front wheel bearing hub assemblies are a direct-replacement kit for the front left and right of 2016–2023 Nissan Titan XD 4WD trucks. The kit arrives with both hubs, studs, and snap rings and is intended to be installed where a worn or noisy hub needs replacement. Detroit Axle highlights high-frequency quenching and premium bearing steel intended to resist wear and corrosion, and the assemblies include ABS tone rings for the vehicle’s speed sensor. In practice the hubs install like a typical hub assembly and restore smooth wheel rotation and ABS functionality when the original unit has failed. Buyers can expect OEM-style fit and reduced road noise compared with a failing bearing, and several user reports cite good fitment and longevity beyond 10,000 miles. Pay attention during installation to proper bearing seal seating and ABS sensor handling because occasional packaging or sensor damage has been reported; if a sensor is damaged you may reuse the old sensor as a workaround. These are a performance-minded aftermarket option for Titan XD owners wanting factory-quality replacement without rebuilding the original hub.
Best for: Performance-oriented owners who prioritize restoring factory-level steering and ABS behavior on a Nissan Titan XD and want a ready-to-install, high-quality aftermarket hub replacement.
Less Ideal for: If you prefer dealer parts with direct factory warranty handling or want an exact factory reman unit with direct dealer support, consider dealer-sourced replacements instead.
- Sold as a matched pair for front left and right replacement, simplifying a full-axle repair
- Built with heat-treated bearing steel and high-frequency quenching for improved wear resistance
- Includes ABS tone ring to retain wheel speed sensing and traction control functions
- Designed to match factory fit and flange patterns for straightforward installation on the Titan XD
- Some buyers reported damaged or improperly packaged sensors on arrival requiring inspection or reuse of the original sensor
- Occasional early failures documented in a small number of reports, so long-term durability may vary
Verdict A high-quality, performance-oriented pair of front hub assemblies that restore factory fit and ABS functionality for 2016–2023 Nissan Titan XD 4WD trucks, with generally good durability but occasional packaging or sensor issues reported.
4. Torchbeam Front Wheel Bearing & Hub Assembly 515155 for 2012–2015 Nissan Titan/Armada with ABS
| Bearing Number | 515155 |
|---|---|
| Material | 55# Steel and GCr15 Steel |
| Specification Met | ISO 16949 |
This Torchbeam front wheel bearing and hub assembly is a direct replacement designed for 2012–2015 Nissan Titan and Armada 4WD vehicles with ABS. It installs like a standard hub assembly and provides the wheel-bearing, flange and studs in a single unit so you can swap a noisy or worn hub without pressing out individual bearings. Torchbeam notes use of carbon structural steel and an improved sealing design with triple oil seals to resist moisture and contamination, which should reduce noise and vibration compared with a failing hub. Practical benefits for a budget buyer are straightforward: it restores wheel-end function, eliminates bearing roar, and includes corrosion protection on the studs and flange for longer service life. Limitations to expect are typical for value aftermarket hubs — you may see variability in fitment so double-check lug pattern and vehicle spec before ordering, and long-term durability may not match a higher-end factory-quality replacement.
Best for: Budget-conscious owners who need an inexpensive, straightforward replacement to stop bearing noise and restore safe wheel operation on a Nissan Titan or Armada and who prioritize cost and quick repair over premium longevity.
Less Ideal for: Buyers seeking the longest-term, factory-quality longevity or those who require guaranteed fit for dual-rear-wheel configurations should consider a higher-end or dealer-sourced hub assembly.
- Sold as a complete hub assembly for quick replacement without pressing bearings
- Triple oil seal and corrosion-protected finish aim to reduce noise and extend service life
- Manufactured from higher-hardness carbon and bearing steel intended to meet OEM-style performance
- Direct fit for specified 2012–2015 Nissan Titan and Armada 4WD models with ABS
- Aftermarket build quality can vary and may not match higher-cost factory-quality hubs
- Fitment depends on correct lug pattern and vehicle configuration so wrong variant is possible
Verdict A cost-effective, direct-replacement hub assembly that fixes bearing noise and restores wheel function for 2012–2015 Nissan Titan and Armada 4WDs but may sacrifice some long-term durability compared with premium factory-quality parts.
5. A-Premium Front Wheel Hub and Bearing Assembly with ABS, 6-Lug
| Bearing Number | 515124 |
|---|---|
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Wheel Stud Quantity | 6-Lug |
| Speed Sensor Included | Yes |
This A-Premium hub and bearing assembly is a direct-replacement style unit intended for front left or right installation on compatible Nissan Titan RWD models. It integrates the bearing, hub flange and ABS speed sensor into one pre-greased assembly so you can swap a worn or noisy hub without pressing bearings or rebuilding components. The listing calls out heavy-duty steel construction, six wheel studs and pre-installed seals and grease, which should restore factory fit with existing rotors and wheels. In practice this makes it useful for owners replacing a failed bearing that is causing noise, vibration, or ABS warnings. Some buyers report quick failures on a few units while others find reliable performance, so installation should include careful inspection of wheel hardware and ABS connectors. This product offers a budget-friendly way to return a truck to service, but buyers who need guaranteed long-term durability may prefer an established factory-quality replacement or dealer part.
Best for: Risk-averse mainstream buyers seeking a practical, lower-cost replacement that gets a Nissan Titan back on the road quickly while minimizing installation complexity.
Less Ideal for: Those who prioritize guaranteed OEM-level longevity or need a dealer-sourced part backed by factory support should consider alternatives.
- One-piece pre-greased assembly simplifies replacement without pressing bearings
- Includes ABS speed sensor for direct electrical compatibility
- Six lug studs and factory-matching flange layout fit existing rotors and wheels
- Constructed from hardened steels intended for high axial and radial loads
- Mixed user reports on long-term reliability with some early failures noted
- Not a branded factory part so fitment and longevity can vary by vehicle condition
Verdict A convenient, pre-greased replacement hub for Nissan Titan owners that simplifies repair but may not match factory part longevity.
6. Detroit Axle Front Wheel Hub and Bearing Assembly Kit (pair) with ABS Sensor
| Position | Front Left and Right |
|---|---|
| Lugs | 6 Bolt |
| ABS Type | Sensor Wire |
| Flange Type | 3-Bolt Triangular |
| Kit Includes | 2x Front Wheel Bearing and Hubs Assembly |
These two front wheel hub and bearing assemblies are replacement units intended to restore front-wheel rotation and ABS signal on compatible Nissan Titan and related vehicles. The kit includes left and right assemblies with the 6-lug flange and factory-style ABS sensor wire so installation is plug-and-play for a correct fitment. Detroit Axle states the parts undergo impact, wear, and fatigue testing and bundles both sides so you replace both hubs at once to maintain balanced wear. In practice this saves time versus buying single pieces and reduces the chance of mixed-aged bearings on the axle. Buyers should expect typical installation tasks such as removing the old hubs and pressing or torquing components, so a professional or well-equipped DIYer is recommended. While many users report good fit and quiet operation, there are occasional complaints about individual failures and warranty follow-up, so keep records and inspect promptly after installation.
Best for: Practical optimizers who prioritize getting a reliable, factory-style replacement set at a lower total cost by swapping both front hubs together to avoid uneven wear and extra labor.
Less Ideal for: If you prefer a lifetime-proven OE brand with dealer-level warranty support or need a plug-and-play option for multiple vehicle models, look at alternatives with stronger dealer backing.
- Includes both left and right front hub assemblies so both sides are replaced at once
- Built with integrated ABS sensor wiring for direct plug-in replacement
- 6-lug flange matches factory hub pattern for bolt-on installation
- Manufacturer claims durability testing to address impact, wear, and fatigue
- Some buyers report isolated premature failures and challenging warranty replacement experiences
- Installation can be labor intensive and may require press or shop tools for removal of old hubs
Verdict A cost-effective, factory-style pair of front hub assemblies for Nissan Titan owners who want to replace both sides together, with good fitment but some reports of isolated quality issues.
7. TRQ Front Wheel Bearing and Hub Assembly Set (2-Piece) for 2017–2023 Nissan Titan 4WD
| Fitment | 2017-2023 Nissan Titan 4WD front driver & passenger side |
|---|---|
| Quantity | 2 Piece |
| Bearing Type | Taper |
| Material | Alloy Steel |
| Compatible Lubricant | Grease |
This TRQ kit supplies a matched pair of front left and right wheel hub and taper-bearing assemblies intended as direct replacements for 2017–2023 Nissan Titan 4WD models. Each assembly arrives pre-machined and filled with compatible grease, so installation is typical for a hub swap: remove the old hubs, bolt these in, and torque to factory spec. The set aims to reduce noise and vibration and restore steering stability thanks to factory-style fitment and pre-assembled components. TRQ supports the repair process with video guidance that helps DIYers and independent shops save time. Expect good fit and finish in most installs and quieter operation compared with worn hubs. Some buyers report occasional quality-control variability and potential issues with wheel studs or early bearing failure, so professional installation and inspection after the first few hundred miles are prudent. This kit is practical for routine front-end service but not a performance upgrade or heavy-duty aftermarket replacement.
Best for: Balanced owners prioritizing a reliable, factory-style repair for routine front-end maintenance on a Nissan Titan who want a straightforward replacement without specialty upgrades.
Less Ideal for: Drivers seeking heavy-duty, high-mileage performance upgrades or a guaranteed premium OEM-level solution should consider higher-end branded aftermarket options or dealer parts instead.
- Sold as a matched pair covering both front driver and passenger sides for straightforward replacement
- Pre-machined, pre-greased, and designed for direct-fit installation to minimize modification
- Includes taper-bearing design that helps restore quiet operation and steering stability
- TRQ provides step-by-step installation videos to assist DIYers and installers
- Some buyers have reported inconsistent quality control including early noise or metal debris in a few units
- Wheel studs may not match every vehicle variant, occasionally requiring reuse of original studs
Verdict A practical, direct-fit two-piece hub and bearing pair for Nissan Titan owners who want a convenient factory-style replacement at a value, but verify fit and inspect after installation.
Choosing the Right Nissan Titan Wheel Hub Assembly: Key Factors to Consider
Bearing Type and Load Rating
The bearing inside the hub assembly carries the vertical and lateral loads of the vehicle, so its design directly affects durability and ride quality. Higher load ratings are important for heavier trucks and towing applications because they reduce the chance of premature failure under stress.
Bearings with robust inner race and optimized roller or ball selection typically run cooler and resist deformation. When choosing a hub, review the specified load rating and bearing type because these determine how the assembly will behave under sustained highway loads, cornering forces, and during towing.
Seal Design and Contamination Resistance
A hub assembly seal keeps water, dirt, and road salts away from the bearing surfaces, and poor sealing is a common cause of early bearing failure. Effective seals should provide a close tolerance lip and materials that resist cracking from heat and chemical exposure.
Consider assemblies that emphasize multi-lip seals or integrated labyrinth designs. Better seals reduce the need for premature replacement and help maintain smooth rotation, especially in wet or salty environments where corrosion and abrasive particles are a concern.
Fitment and Mounting Accuracy
Correct fitment affects alignment, wheel runout, and ABS sensor alignment when applicable. A hub that matches the Nissan Titan's factory mounting points and tolerances reduces installation headaches and minimizes vibration or uneven tire wear.
Check whether the assembly provides precise bolt patterns, hub centering features, and compatibility with the truck's wheel studs or bolts. Assemblies that include accurate mounting hardware or are machined to precise dimensions typically yield a more reliable installation and better long-term performance.
ABS Tone Ring and Sensor Compatibility
Many Nissan Titan models use ABS and wheel speed sensors that rely on a tone ring or integrated sensor surface in the hub assembly. If the replacement does not replicate the factory tone ring location and tooth profile, the ABS system can produce faults or degraded performance.
Verify whether the assembly includes an ABS ring or is explicitly listed as compatible with the Titan's sensor system. Even when the sensor is separate, the hub must maintain the correct distance and alignment to ensure accurate wheel-speed readings.
Material, Coating, and Corrosion Protection
Hubs are exposed to road salts, moisture, and gravel, so material choice and surface treatment matter for longevity. Cast or forged hubs with protective coatings resist pitting and rust, which otherwise can lead to structural weakening and difficulty during future service.
Look for zinc plating, e-coating, or other corrosion-resistant finishes and for hub bodies produced from durable alloys. Better corrosion protection lowers the risk of seized fasteners and extends the useful life of the assembly, particularly in harsh climates.
Ease of Installation and Included Hardware
Some assemblies arrive as complete units with studs, seals, and mounting bolts, while others require transfer of components from the old hub. A complete assembly reduces labor and the chance of reusing worn parts, which can save time and reduce installation errors.
Consider whether the product includes necessary hardware and whether any special tools or procedures are required for preloading bearings or torquing components. Clear instructions and included hardware improve the odds of a correct installation and consistent performance.
FAQ
What are common symptoms of a failing wheel hub assembly on a Nissan Titan?
Common signs include a grinding or humming noise that changes with vehicle speed, vibration through the steering wheel, and uneven tire wear. You may also notice ABS warning lights if the hub has an integrated tone ring that affects the sensor. These symptoms often develop gradually, so addressing them early can prevent further damage.
Can I replace a Nissan Titan wheel hub assembly myself?
Many mechanically inclined owners can replace a hub assembly with basic tools and a torque wrench, provided they follow proper procedures and torque specs. Some steps may require lifting the vehicle safely, removing the brake rotor, and supporting suspension components. If you are unsure about torque values or alignment after installation, consult a professional.
How long do wheel hub assemblies typically last on a truck like the Nissan Titan?
Lifespan varies based on driving conditions, load, and maintenance, but assemblies often last many tens of thousands of miles under normal use. Exposure to water, road salt, heavy towing, or off-road use can shorten service life. Regular inspection of seals and listening for noise can help catch problems early.
Does replacing the hub assembly fix ABS sensor issues?
If the ABS fault is caused by a damaged or misaligned tone ring or a worn hub affecting the sensor signal, replacing the hub assembly with a correctly compatible unit often resolves the issue. However, the sensor and wiring should also be inspected to ensure they are working and properly connected.
Should I replace front and rear wheel hub assemblies at the same time?
It depends on condition and symptoms. If only one hub shows wear or noise, it is acceptable to replace that unit alone. Replacing hubs in pairs can provide symmetrical performance and may be considered when one side has significant wear or when other service is being performed, but it is not always necessary.
How We Chose the Best Nissan Titan Wheel Hub Assembly
We focused on wheel hub assemblies that meet the mechanical demands of the Nissan Titan while prioritizing long-term reliability and proper fitment. Key evaluation criteria included bearing design and load rating to ensure the assembly can handle the truck's weight and towing stresses; seal quality and contamination resistance to limit premature wear from water and road debris; hub material and corrosion protection for longevity in varied climates; and manufacturing tolerances that affect runout and vibration. We also considered the inclusion of mounting hardware and whether the assembly supports ABS tone rings when required by the vehicle. We excluded any units that did not provide clear fitment information or lacked specifications for bearing type and sealing. We favored assemblies with quantifiable specs related to load capacity, rotational smoothness, and corrosion resistance rather than unverifiable marketing claims. Noise, ease of installation, and expected service life were additional filters used to narrow the list.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize assemblies that match the Nissan Titan's fitment and load-bearing needs while offering robust seals and corrosion protection. Bearing quality, ABS compatibility, and precise mounting dimensions are the most important factors for long-term reliability. Weigh the tradeoffs between a complete, ready-to-install unit and one that requires transferring hardware. Focus on assemblies with clear specifications for bearing type, load rating, and sealing to restore quiet, stable operation.
Explore More:
- Check out all Nissan Titan parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
