Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
When your Nissan Titan shows warning lights or inconsistent speed readings, the right ABS wheel speed sensor can restore reliable feedback to your vehicle systems. Choosing the correct sensor matters because an exact fit and stable signal affect braking, traction control, and speedometer accuracy. This guide highlights seven shortlisted options selected for fitment and signal performance. We evaluate each pick based on compatibility, installation ease, and the electrical characteristics that matter for consistent operation. Read on to find options that match your needs and get back to confident driving.
Looking for other parts? See all Nissan Titan parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium ABS Wheel Speed Sensor — Rear Right for Nissan Titan (47900-7S200) |  |
| Most Popular A crowd favorite that many people choose with confidence | SCITOO Front ABS Wheel Speed Sensors (pair) for Nissan Murano and Titan |  |
| Best Quality Built to a higher standard if you want something more solid | BOXI Set of 2 Rear ABS Wheel Speed Sensors for Nissan Titan (2004–2011) |  |
| Best Budget The cheapest option that still gets the job done reliably | Ynovvo 2-Pack Rear ABS Wheel Speed Sensors for Nissan Titan (Left & Right) |  |
| Most Sold A high-volume bestseller chosen again and again | Ruizure Rear ABS Wheel Speed Sensor Kit for Nissan Titan (2004–2011), 2‑piece |  |
| Best Value for Money The sweet spot between price and what you get | Holstein Parts ABS Wheel Speed Sensor (Front, Left or Right) |  |
| Best Overall The best all-around choice for most situations | A-Premium ABS Wheel Speed Sensor, Rear Driver and Passenger Pair for Nissan Titan (2012–2015) |  |
1. A-Premium ABS Wheel Speed Sensor — Rear Right for Nissan Titan (47900-7S200)
| Vehicle fitment | Nissan Titan 2004-2012 V8 5.6L Rear Right Passenger Side |
|---|---|
| Connector pins | 2 Pins |
| Mounting type | Flange Mount |
| Output type | Analog |
| OEM part numbers | 47900-7S200, ALS638, 5S11249, 970-293 |
This A-Premium ABS wheel speed sensor is a direct-fit replacement for the rear right/passenger side of 2004–2012 Nissan Titan V8 5.6L trucks and is designed to feed wheel speed information to the vehicle anti-lock brake system. It installs in the factory location using the flange mount and the two-pin connector, so typical use is straightforward—remove the old sensor, plug in the harness, and secure the mounting. The sensor is molded from ABS plastic and the listing states it meets or exceeds factory specifications and undergoes performance testing. In practice that means a stable analog output signal and quick response to wheel rotation changes, which helps clear ABS warnings and restore normal ABS and traction control behavior. Limitations are that this is an aftermarket part rather than a factory-branded unit and long-term durability depends on installation and local conditions such as road salt exposure. The product comes with reference OEM numbers for fit confirmation and a one-year unlimited-mileage guarantee from the maker.
Best for: Reliability-focused buyers who prioritize restoring proper ABS function with a proven, vehicle-specific replacement and prefer parts that simplify installation and minimize downtime.
Less Ideal for: Buyers wanting a factory-branded OEM part or who need an industrial-grade heavy-duty sensor for extreme off-road conditions should look at alternative factory-quality options.
- Direct-fit replacement for 2004–2012 Nissan Titan rear right wheel location using factory mounting points
- Two-pin connector and flange mount match the vehicle harness for easy plug-and-play installation
- Stated to meet or exceed factory specifications and performance tested for consistent analog signal output
- Aftermarket build rather than factory-branded sensor so long-term lifespan may vary with conditions and use
- Made of ABS plastic which can be more susceptible to damage from impact or severe chemical exposure
Verdict A practical, vehicle-specific aftermarket replacement that restores ABS wheel-speed reporting for Nissan Titan owners who want a reliable, easy-to-install fix.
2. SCITOO Front ABS Wheel Speed Sensors (pair) for Nissan Murano and Titan
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Digital |
| Upper Temperature Rating | 246 Degrees Celsius |
These SCITOO sensors are sold as a two-piece front sensor set intended to replace a failed wheel speed sensor on compatible Nissan Murano and Titan models. They transmit wheel speed data via the vehicle harness to the brake control module so ABS and traction systems can function normally. The parts are injection-molded ABS plastic with flange mounting and a digital output, which makes them easy to bolt in place without modifying connectors when fitment is correct. Buyers report quick resolution of ABS dash codes and straightforward DIY installation on some vehicles, and the package includes two sensors so you have a spare. However, fitment and connector compatibility are inconsistent across years and trim levels, and several users reported early failures or electrical problems after installation. That means this is a convenient budget replacement when it matches your vehicle, but you should verify the connector and test immediately after install and be ready to swap back to the original if signs of electrical trouble appear.
Best for: Buyers who prioritize convenience and want a ready-to-install, cost-conscious replacement they can fit themselves to clear ABS or traction-control warnings quickly.
Less Ideal for: Those seeking a guaranteed long-term OEM match or buyers unwilling to diagnose connector fit or test the sensors immediately after installation should consider a factory-quality alternative.
- Sold as a pair so you get two front sensors in one package
- Designed for direct flange-mount replacement with a digital output for plug-and-play when correct fit
- Made from durable ABS plastic and rated for high operating temperatures
- Fitment and connector compatibility vary between model years and trims
- Some users reported premature failures and electrical issues after installation
Verdict A convenient, low-cost pair of front ABS sensors that can quickly clear ABS codes when the connector and fitment match your Nissan, but inconsistent fit and some reliability reports mean confirm compatibility before relying on them long-term.
3. BOXI Set of 2 Rear ABS Wheel Speed Sensors for Nissan Titan (2004–2011)
| Fits Vehicle | Nissan Titan 2004-2011 V8-5.6L |
|---|---|
| Placement | Rear left and rear right |
| Material | Acrylonitrile Butadiene Styrene |
| Output Type | electrical signal |
These BOXI rear ABS wheel speed sensors replace the left and right rear units on Nissan Titan 2004–2011 V8 5.6L trucks. They are marketed as direct-fit aftermarket replacements that plug into the factory harness and mount using the original flange points, so installation is the same as a factory part and suitable for professional or experienced DIY installation. The sensors are made from ABS plastic and are tested to provide a stable electrical signal and quick response for the vehicle stability and ABS systems, which helps restore proper wheel-speed readings and prevents ABS or traction-control warnings. The pair-pack is convenient when both sides should be serviced at once. Limitations include reliance on proper installation and calibration by a technician for best performance, and this aftermarket set does not include installation instructions. For performance-focused owners seeking a cost-effective way to restore correct ABS function, these sensors offer a direct replacement option that aims to match factory behavior.
Best for: Performance-oriented buyers who prioritize restoring precise ABS and traction control behavior on a Nissan Titan and want a matched pair replacement that aims to replicate factory performance.
Less Ideal for: Owners looking for a plug-and-play branded OEM sensor with factory documentation or those uncomfortable with arranging professional installation should consider alternatives.
- Sold as a matched pair for rear left and right replacement
- Designed for direct fit to Nissan Titan 2004–2011 V8 5.6L mounting points
- Engineered to provide stable electrical signal and high response frequency
- Constructed to meet or exceed factory replacement standards and tested before shipping
- No installation instructions included, which can complicate DIY fitting
- Aftermarket unit may require professional installation or calibration for optimal ABS performance
Verdict A matched-pair aftermarket rear ABS sensor set aimed at performance-minded Nissan Titan owners who need a factory-style replacement to restore proper wheel-speed sensing.
4. Ynovvo 2-Pack Rear ABS Wheel Speed Sensors for Nissan Titan (Left & Right)
| Brand | Ynovvo |
|---|---|
| Material | Acrylonitrile Butadiene Styrene |
| Mounting Type | Flange Mount |
| Output Type | electronic |
These Ynovvo rear ABS wheel speed sensors are a budget-focused replacement sold as a left and right pair for compatible Nissan Titan models. They function as direct-fit replacements for worn or failed factory sensors and are typically used when an ABS warning light appears or when diagnosing speed-sensing issues. Constructed from ABS plastic with flange-mount fittings and standard electronic output, the sensors aim to match factory fit and connector layout so installation is straightforward and can usually be completed with basic hand tools. The practical benefits are clear: two sensors in one package simplify repairs and reduce downtime, and customer feedback indicates simple installation and immediate restoration of normal ABS operation. Limitations are typical for economy aftermarket parts—long-term durability compared with higher-end or OEM parts is uncertain and the listing does not include extended test data or manufacturer-backed warranty details, so conservative buyers may prefer to monitor performance after installation.
Best for: Budget-conscious owners focused on a low-cost, straightforward repair to clear ABS faults and restore normal speed-sensor function on a Nissan Titan.
Less Ideal for: Drivers seeking long-term fleet-grade durability or those who prefer manufacturer-backed OEM parts and extended warranties should consider higher-end or factory replacements instead.
- Sold as a pair (left and right) so both rear sensors are replaced at once
- Designed to match factory mounting style for straightforward installation
- Compatible with multiple Nissan Titan trim years listed for easy fit confirmation
- Lightweight ABS construction resists corrosion compared with some metal housings
- Long-term durability and comparative lifespan versus factory parts are not documented
Verdict A cost-effective pair of rear ABS speed sensors that restore ABS function on supported Nissan Titan years but may not match OEM longevity.
5. Ruizure Rear ABS Wheel Speed Sensor Kit for Nissan Titan (2004–2011), 2‑piece
| Vehicle fitment | Nissan Titan 2004-2011 |
|---|---|
| Position | Rear left and right (2 pcs) |
| Output Type | Digital |
| Mounting Type | Flange Mount |
This Ruizure kit supplies both left and right rear ABS wheel speed sensors intended as direct replacements for worn units on 2004–2011 Nissan Titan models. Install typically involves removing one small mounting bolt and swapping the sensor and connector to restore wheel-speed data to the ABS control unit. The sensors are billed as digital outputs with flange mounting and use metal construction for improved durability compared with cheap plastic parts. In real-world use they clear ABS and slip codes, re-enable four-wheel-drive engagement affected by faulty sensors, and have multiple owner reports of straightforward fit and reliable operation. Limitations are that these are aftermarket replacements rather than factory-branded parts, so long-term durability can vary and results depend on clean connectors and correct installation; if a truck has damaged wiring or corroded plugs additional repair may be required. For a risk-averse buyer they offer a practical way to repair ABS/traction issues without major teardown when the original sensors have failed.
Best for: Drivers who prioritize restoring safe ABS and traction function with a straightforward, low-risk replacement that matches factory fit and keeps the truck on the road.
Less Ideal for: Users seeking an OEM-branded part for guaranteed long-term parity or those who need a full wiring harness repair rather than just replacement sensors.
- Sold as a pair to replace both rear sensors at once, simplifying repairs
- Reported to be a direct fit for 2004–2011 Nissan Titan rear mounting points and connectors
- Metal construction and flange mount design intended for durability in harsh road conditions
- Aftermarket unit so long-term lifespan may differ from factory-quality sensors
- Does not address damaged wheel wiring harnesses or corroded connectors which must be repaired separately
Verdict A practical two-piece rear sensor kit that restores ABS/traction on 2004–2011 Nissan Titans without major fuss, though it is an aftermarket replacement rather than factory-branded.
6. Holstein Parts ABS Wheel Speed Sensor (Front, Left or Right)
| Compatible vehicles | 2007-2012 Nissan Titan (front left or right) |
|---|---|
| Mounting Type | Flange Mount |
| Specific Use | Speed |
| Material | Reinforced plastic housing |
This Holstein ABS wheel speed sensor is a direct factory-quality replacement for the front left or right sensor on compatible Nissan Titan models. It replaces a failed sensor to restore ABS and traction control inputs by reading wheel speed and sending that signal to the vehicle control modules. The sensor uses a reinforced plastic housing, OEM-style connectors and includes grommets and clips to match factory routing for an easier install. In practice this means a quick swap with minimal wiring work and a clean, watertight connection that resists road grime. Holstein highlights quality control and claims low failure rates, and the part arrives packaged to protect the electronics. Limitations: it is sold individually so you must buy two if replacing both sides, and like most aftermarket sensors you should confirm trim and model-year fitment before ordering. Expect a practical, cost-effective replacement rather than an upgraded performance sensor.
Best for: Practical optimizers seeking a reliable, cost-conscious factory-style replacement to return a Nissan Titan's ABS and traction systems to normal operation without paying for dealer parts.
Less Ideal for: Buyers who want performance upgrades, aftermarket tuning, or a multi-sensor kit for multiple vehicles should look elsewhere.
- Direct factory-quality replacement designed to match fit and function for quick installation
- OE-style connectors and included grommets/wire clips for a water-tight, correct routing
- Reinforced plastic housing provides corrosion and element resistance for durability
- Arrives packaged to protect the electronic components during shipping
- Sold individually rather than as a pair which requires an additional purchase if replacing both sides
- Fitment varies by trim and model year so compatibility must be verified before purchase
Verdict A budget-friendly, factory-quality front speed sensor that restores ABS operation on compatible Nissan Titan models but is sold individually so check fitment and buy two if needed.
7. A-Premium ABS Wheel Speed Sensor, Rear Driver and Passenger Pair for Nissan Titan (2012–2015)
| Vehicle fitment | Nissan Titan 2012-2015 V8 5.6L Cab Pickup |
|---|---|
| Location | Rear driver and passenger side |
| Connector pins | 2 Pins |
| Mounting type | Flange Mount |
| Manufacturer part numbers | 02650-09275, 0265009276, 47901-9FF1A, 47900-9FF1A |
These A-Premium sensors replace the rear driver and passenger wheel speed sensors on 2012–2015 Nissan Titan V8 5.6L trucks and restore wheel-speed feedback to the anti-lock brake system. They are sold as a two-piece set with a two-pin electrical connector and flange-mount design to match the factory mounting. In practice they are used when a damaged or failed sensor causes ABS warnings, traction control faults, or uneven braking behavior. The listing emphasizes 100 percent performance testing and claims the parts meet or exceed factory specifications, which translates to straightforward plug-and-play replacement for many owners and faster fault clearing when the wiring and connectors are intact. Benefits include easier installation compared with chasing individual sensors and the ability to replace both sides at once to keep readings consistent. Limitations to note are occasional variability in electrical tolerance reported in some reviews and the usual risk that an aftermarket sensor will require verification of connector pin fit and correct resistance before installation.
Best for: Balanced all-round buyers who want a practical, factory-style replacement to restore ABS and traction control on a Nissan Titan without hunting multiple single parts.
Less Ideal for: Owners looking for an upgraded performance sensor or a lifetime-guaranteed premium OEM alternative should consider higher-end branded options or dealer parts.
- Sold as a matched two-piece rear sensor set so both sides can be replaced at once
- Designed to match factory flange mounting and 2-pin connector for straightforward installation
- Manufacturer states parts are performance tested and built to meet or exceed factory specifications
- Some buyer reports cite out-of-spec electrical resistance or early failure on individual units
Verdict A cost-effective, matched rear sensor pair that restores ABS function on 2012–2015 Nissan Titan trucks, provided you verify connector compatibility and sensor resistance before install.
Choosing the Right Nissan Titan ABS Wheel Speed Sensor: Key Factors to Consider
Fitment and Mounting Design
Proper fitment and mounting design ensure the sensor seats correctly and maintains consistent proximity to the tone ring or reluctor. A sensor that does not align properly can cause intermittent readings, false fault codes, or physical damage during driving. Check mounting flange shape, screw hole positions, and any integrated brackets. Matching the original sealing surfaces prevents moisture intrusion and reduces stress on the wiring harness. A correct mechanical fit reduces installation time and minimizes the risk of premature failure due to vibration or impact.
Electrical Signal Characteristics
The sensor must produce a clean, consistent signal at the expected voltage or frequency range so the vehicle control module can interpret wheel speed accurately. Variations in waveform amplitude or noise can trigger ABS or traction control alerts even if the mechanical parts are fine. Look for specifications about output type, such as active or passive sensors, and expected voltage or resistance ranges. Consistent signal behavior across speeds and in wet or dirty conditions is particularly important for predictable braking and stability control performance.
Connector and Wiring Compatibility
Connector shape and pinout must match the vehicle harness to avoid splicing or adapter use that can introduce failure points. Properly routed wiring with factory-style grommets and protective sleeves resists chafing from suspension movement and road debris. Consider the length and routing of the pigtail, the quality of the connector housing, and whether the sensor includes strain relief. Sensors with robust terminals and corrosion-resistant contacts reduce the chance of intermittent faults tied to poor electrical connections.
Durability and Environmental Resistance
Wheel speed sensors operate close to the road and face water, salt, dirt, and temperature swings. Durable housings, high-quality seals, and corrosion-resistant materials extend service life and maintain signal integrity. Assess the sensor's ingress protection, thermal ratings, and materials for the sensing element. Designs that minimize crevices where contaminants collect and that use potting compounds or gaskets at critical joints tend to last longer in real-world driving conditions.
Installation Ease and Serviceability
Sensors that follow the vehicle's original design simplify replacement and reduce labor time. Clear access to mounting fasteners and a connector that plugs in without forcing reduces the chance of damage during installation. Consider whether the sensor requires special tools or calibration, and whether hardware like clips or retaining bolts are included. Easier installation lowers the chance of errors during replacement and helps ensure the sensor is positioned and secured correctly.
Diagnostic Clarity and Compatibility
A sensor that provides predictable signals helps technicians diagnose issues more quickly. Compatibility with standard diagnostic procedures, such as reading resistance or observing waveform patterns, speeds troubleshooting. Sensors that deviate from expected electrical parameters can complicate fault isolation. Choose sensors with well-documented specs so you can perform wiring tests or interpret ABS sensor codes with confidence.
FAQ
What are common ABS sensor symptoms on a Nissan Titan?
Common symptoms often include the ABS or traction control warning light, intermittent speedometer readings, or reduced stability control function. You may also notice irregular braking behavior under certain conditions. These signs usually warrant an inspection of the sensor, wiring, and tone ring before assuming replacement is necessary.
Where is the ABS wheel speed sensor located on the Nissan Titan?
The ABS wheel speed sensors are mounted at each wheel hub area, typically near the brake rotor and tone ring. Access varies by front or rear position, and some locations may require removal of wheel or brake components for a clear view. Visual inspection focuses on the sensor body, connector, and the adjacent reluctor ring.
How do I test ABS sensor wiring on a Nissan Titan?
Testing usually starts with a visual check for damaged insulation, corrosion, or loose connectors. Use a multimeter to measure continuity and resistance per the vehicle's specifications, and observe the sensor output with an oscilloscope or scan tool while spinning the wheel to see waveform behavior. These tests help distinguish between sensor failure and wiring or module issues.
Will replacing the wheel speed sensor clear ABS codes?
Replacing a faulty sensor often clears codes after the vehicle's system relearns or the codes are reset. However, codes can persist if the underlying issue is wiring damage, a defective reluctor ring, or a module fault. It is usually best to confirm the sensor is the root cause before replacement to avoid unnecessary work.
How long do ABS wheel speed sensors usually last?
Sensor lifespan varies widely depending on driving conditions, road salt exposure, and installation quality. Many last several years under normal use, while those exposed to corrosion or impact may fail sooner. Regular inspections during brake service can catch early signs of wear and prevent sudden faults.
What does ABS sensor code P0500 mean for the Nissan Titan?
Code P0500 indicates a vehicle speed sensor or related circuit issue and often appears alongside wheel speed sensor faults. It usually signals that the vehicle speed signal is missing or erratic. Diagnosing P0500 involves checking sensor outputs, wiring continuity, and the tone ring condition to determine the exact cause.
How We Chose the Best Nissan Titan ABS Wheel Speed Sensor
We focused on sensors that meet the mechanical and electrical demands of the Nissan Titan. Key evaluation criteria included physical fitment and mounting design to match factory locations, electrical signal stability and waveform consistency under typical driving conditions, connector and wiring compatibility to reduce installation issues, and durability against road contaminants and temperature cycling. We also considered ease of installation for routine replacement, resistance to corrosion and moisture, and the quality of sealing where the sensor meets the hub or axle. Sensors that required extensive vehicle modification or that lacked compatible connectors were excluded. Units with unclear specifications for signal output or ones that did not specify application compatibility with the vehicle's model year were also removed. The final list balances straightforward installation, reliable signal performance, and long-term durability for everyday driving.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize sensors that match the Nissan Titan's mounting and electrical specifications, provide stable signal output, and offer durable sealing against road contaminants. Fitment and connector compatibility reduce installation headaches, while clear electrical specs make diagnostics easier. Balance the need for straightforward installation with long-term durability. When you select a sensor that addresses the mechanical fit, signal behavior, and environmental resistance discussed above, you are more likely to restore reliable wheel speed input and consistent vehicle control performance.
Explore More:
- Check out all Nissan Titan parts & accessories
- Explore ABS Wheel Speed Sensors Maintenance & Repair Guides
- Explore Electrical System
- Browse all Auto Parts
