Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Choosing the right Chevrolet Traverse engine mount affects ride comfort, driveline stability, and long-term component wear. A worn or incorrect mount can increase vibration, transmit noise into the cabin, and strain adjacent components. This guide covers the top shortlisted engine mounts for the Chevrolet Traverse and explains the criteria used to evaluate them, including durability and fitment accuracy. Read on to understand the tradeoffs and which features matter most before you replace a mount.
Looking for other parts? See all Chevrolet Traverse parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | GM Genuine Parts 20760911 Engine Torque Strut Mount |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front and Rear Engine Mount Set (2-Piece) |  |
| Best Quality Built to a higher standard if you want something more solid | Pnktool 4‑Piece Engine and Transmission Mount Kit for 3.6L FWD Traverse/Enclave (2018–2023) |  |
| Best Budget The cheapest option that still gets the job done reliably | Yllshengyu 3-Piece Engine Motor Mount Kit for GM Trucks & SUVs |  |
| Most Sold A high-volume bestseller chosen again and again | iKer Engine and Transmission Mount Kit (4‑Piece) for Chevrolet Traverse 3.6L |  |
| Best Value for Money The sweet spot between price and what you get | GM Genuine Parts Engine Mount (15062381) |  |
| Best Overall The best all-around choice for most situations | Mardarth Engine and Transmission Mount Set for 2009–2019 Chevrolet Traverse 3.6L |  |
1. GM Genuine Parts 20760911 Engine Torque Strut Mount
| Included Components | Engine Torque Strut Mount |
|---|---|
| Manufacturer | ACDelco |
| Manufacturer Part Number | 20760911 |
| OEM Part Number | 20760911 |
| Specific Uses For Product | vehicle |
This GM Genuine Parts torque strut mount is a direct-fit replacement intended to support the engine and limit vibration transmitted to the chassis. It is typically used when the original torque strut shows wear, excessive movement, or causes vibration and noise during acceleration or idle. The part is described as factory-quality and matches original fit and mounting points, so installation is straightforward for a DIYer with basic tools or a technician following a vehicle-specific procedure. Notable features include its factory-replacement design and rubber-damped construction to absorb torque and minimize stress on adjacent mounts. Buyers benefit from an OEM-style fit, predictable performance, and the peace of mind that comes with a genuine GM/ACDelco part. Limitations are that it is single-purpose for the torque strut position and does not address other worn mounts or drivetrain components, and users replacing it should confirm exact fitment for their model year Traverse before ordering.
Best for: Reliability-focused buyers who prioritize factory-quality replacements and predictable, long-term performance for routine repairs on a Chevrolet Traverse.
Less Ideal for: Buyers looking for a one-time solution to multiple worn mounts or those who prefer performance or upgraded aftermarket mounts should consider other options.
- Factory-quality direct-fit that matches original mounting points
- Designed to absorb engine torque and reduce vibration transfer
- Helps minimize stress on other engine mounts, extending their service life
- Replaces only the torque strut so other worn mounts may still need attention
- No multiple-fit options listed so fitment must be verified for specific model years
Verdict A factory-replacement torque strut mount that delivers OEM fit and vibration control for a dependable Chevy Traverse repair.
2. TRQ Front and Rear Engine Mount Set (2-Piece)
| Model | TRQ MTA71146 2 Piece Engine Mount Set |
|---|---|
| Quantity | 2 Piece |
| UPC | 191213711460 |
This TRQ kit provides a front and rear hydraulic engine mount intended as direct replacements for the specified Buick, Chevrolet, GMC and Saturn models. It is typically used when worn mounts allow excessive engine movement, vibration, or driveline noise; installers raise and support the engine, remove the old mounts, and bolt these into the factory locations. Notable features include pre-assembled components for a straightforward swap and TRQ's library of DIY videos to guide installation. In practice the mounts reduce engine shake and can make the vehicle feel smoother at idle and under acceleration. Users report good fitment to factory mounting points and that necessary hardware is included for many applications, though on some vehicles installers needed to reuse original fasteners or adapt sockets during installation. Build quality appears solid for an aftermarket part but there are mixed long-term reports on longevity across different vehicles, so expect typical aftermarket variability compared with factory replacements.
Best for: Buyers who prioritize convenience and want a direct-fit replacement with helpful installation resources so they can complete the repair themselves with minimal fuss.
Less Ideal for: Drivers who demand guaranteed factory-level longevity or a full OEM-backed warranty should consider purchasing dealer-sourced mounts or higher-end alternatives.
- Direct-fit hydraulic front and rear mounts designed to replace factory units without modification
- Comes as a 2-piece kit with components pre-assembled to simplify installation
- Manufacturer provides DIY videos and support resources to help with installation
- Users commonly report noticeably reduced engine vibration and smoother idle after installation
- Some reviewers reported premature failure on certain vehicles, indicating inconsistent long-term durability
- Occasional need to reuse original fasteners or to adapt sockets during installation rather than a perfect hardware match
Verdict A convenient, video-supported direct-fit mount kit that reduces engine vibration for Chevrolet Traverse owners but may show variable long-term durability.
3. Pnktool 4‑Piece Engine and Transmission Mount Kit for 3.6L FWD Traverse/Enclave (2018–2023)
| Compatible vehicles | Chevrolet Traverse 2018–2023 3.6L FWD |
|---|---|
| Unit count | 4 pieces |
| Material | Natural rubber and SBR |
| Set name | Enclave Traverse 3.6L FWD Engine & Transmission Mounts Set (2018-2023) |
This Pnktool kit replaces the engine and transmission mounting points on 3.6L FWD Traverse models and is intended as a direct factory-quality replacement for worn or failed mounts. The set includes the hydraulic and front/rear transmission mounts commonly replaced together, and the manufacturer states the parts use natural rubber and SBR for abrasion resistance and aging stability. In practice this means reduced engine movement and vibration compared with deteriorated mounts, restoring the sharper throttle response and quieter cabin expected by performance-minded owners. Installation is typical of mount swaps and will require basic mechanical access and standard tools; expect alignment and torqueing steps during fitment. Buyers should note this is an aftermarket kit from Pnktool rather than a dealership part, so fit and finish may vary vehicle to vehicle and professional installation is recommended if you need exact factory alignment. The seller offers one year of after-sales support for peace of mind.
Best for: Performance-oriented owners looking to restore tight engine control and reduce vibration on a 2018–2023 Chevrolet Traverse with the 3.6L FWD powertrain.
Less Ideal for: Owners who prioritize strictly OEM-sourced parts or who prefer dealer-installed replacements with guaranteed original-brand fitment and stamping should consider dealer alternatives.
- Complete four-piece set covers both engine and transmission mounts typically replaced together
- Rubber compound listing (natural rubber and SBR) intended for abrasion resistance and longer service life
- Designed to match the 3.6L FWD Traverse/Enclave mounting locations for straightforward replacement
- Includes hydraulic-style mount where required to control engine movement and NVH
- Aftermarket part so exact factory fitment and finish can vary compared with factory-sourced parts
- Installation may require engine support or lift and professional alignment to restore factory mounting geometry
Verdict A full four-piece aftermarket mount kit aimed at restoring engine control and cutting vibration on 2018–2023 Traverse 3.6L FWD models, with performance-focused damping at a non-dealer option.
4. Yllshengyu 3-Piece Engine Motor Mount Kit for GM Trucks & SUVs
| Mounting Type | Chassis Mount |
|---|---|
| Set Name | 3PCS |
| Manufacturer | Yllshengyu |
This three-piece mount kit replaces the engine and transmission mounts found on compatible GM full‑size vehicles and is sold as a front left, front right, and rear transmission mount set. In typical use the kit bolts into place as a direct factory-quality replacement to restore normal engine positioning, reduce vibration, and control torque reactions that cause clunking under acceleration. The listing emphasizes durability and vibration dampening and users report straightforward installation and noticeably smoother operation after fitment. Because it is a budget-focused aftermarket option the materials and longevity can vary compared with higher-end parts, so expect solid short-term performance but monitor long-term wear. Installation is suitable for a competent DIYer or a professional shop since alignment and torque specs matter for chassis-mounted engine supports. If you need a basic, low-cost repair that brings back factory-like ride comfort quickly, this kit delivers usable results for the money.
Best for: Budget-conscious buyers looking for an inexpensive way to restore quiet operation and reduce engine movement in a vehicle, prioritizing short-term value and straightforward repairs.
Less Ideal for: Buyers seeking a long-term, high‑durability mount solution or performance-oriented mounts for heavy towing and high‑stress use should consider premium or OEM replacement options instead.
- Three-piece kit covers both engine sides and the rear transmission mount so multiple worn mounts can be replaced at once
- Marketed as direct factory-replacement fit for many GM full‑size applications which simplifies installation and fitment checks
- Designed to reduce engine vibration and torque movement, improving ride comfort and eliminating common clunks
- Affordable option that delivers immediate improvement in NVH and drivability compared with worn mounts
- Designed for GM full‑size trucks and SUVs; fitment for Chevrolet Traverse is not specified so compatibility must be verified before purchase
- As a budget aftermarket part, long-term durability can be less predictable than premium replacements
Verdict A low-cost three-piece mount kit that can quickly restore smoother operation, but verify Chevy Traverse compatibility and expect variable long-term durability.
5. iKer Engine and Transmission Mount Kit (4‑Piece) for Chevrolet Traverse 3.6L
| Unit Count | 4.0 Count |
|---|---|
| Finish Type | Powder Coated |
| Manufacturer | iKer |
| Model | Engine Motor Mount |
This iKer kit supplies four replacement engine/transmission mounts intended to refit a Chevrolet Traverse with the 3.6L engine. The set replaces the factory mounting points that locate and support the engine and transmission, helping reduce vibration and restore proper drivetrain alignment after worn mounts cause excess movement. Components combine metal and bonded rubber and come powder coated for corrosion resistance. Typical installation is a direct swap for the Traverse mounts listed in the product fitment and is suitable for DIY mechanics with basic tools or for a professional shop. Benefits include restoring smoother idle and throttle response by limiting engine rocking and reestablishing clearance to surrounding components. Expect standard aftermarket tolerances rather than an exact factory part match, so alignment and torque procedures should be followed during installation. The kit does not include installation hardware beyond the mounts and may require lifting equipment for safe removal and fitment of the old mounts.
Best for: Risk-averse mainstream buyers who prioritize returning their Traverse to dependable, factory-like behavior without experimenting with performance or upgraded parts; ideal for owners seeking a practical repair that restores smoothness and reduces vibration.
Less Ideal for: Not for buyers looking for performance or heavy-duty upgrades or for those who want a kit that includes all installation fasteners and accessories.
- Complete four-piece kit covers all primary engine and transmission mounting points for the Traverse 3.6L.
- Metal and rubber construction balances durability with vibration isolation.
- Powder coated finish resists corrosion for longer service life.
- Fits factory mounting locations for a straightforward replacement process.
- Does not include bolts or additional installation hardware.
- Aftermarket fitment may require careful alignment and correct torque to match factory positioning.
Verdict A practical, full replacement kit that restores factory-style mounting and reduces vibration on the Chevrolet Traverse 3.6L but requires proper installation and separate hardware if needed.
6. GM Genuine Parts Engine Mount (15062381)
| Brand | GM GENUINE PARTS |
|---|---|
| Manufacturer | ACDelco |
| Item model number | 15062381 |
| OEM Part Number | 15062381 |
This GM Genuine Parts engine mount is a direct factory-quality replacement intended to stop engine movement and the low-frequency vibration that shows up at idle or under load. Installers replace the old mount by supporting the engine, unbolting the worn mount, and fitting this part in the same location; buyers and mechanics report it noticeably reduces idle vibration and drivetrain noise when correctly installed. The listing emphasizes GM validation and production-level standards, which matches repeated owner reports that aftermarket alternatives failed sooner or left residual vibration. Practical benefits include fitment accuracy for compatible GM vehicles and the reassurance of a manufacturer-backed, vehicle-specific part. It is not a performance upgrade and installation can be fiddly on some Traverse-family engines because access may require raising the engine, removing ancillary components, or special tools. Expect a straightforward replacement in exchange for sticking with a factory-quality part rather than a cheaper aftermarket option.
Best for: Practical optimizers seeking a reliable, factory-quality replacement that fixes vibration issues and minimizes the chance of having to re-replace cheaper mounts.
Less Ideal for: Buyers looking for performance-oriented stiffer mounts or easy bolt-in installs without engine support should consider other options or professional installation.
- Factory-validated fit and function for compatible GM applications
- Proven to reduce idle and low-speed engine vibration when replacing worn mounts
- Durable, production-grade construction compared with many economy aftermarket mounts
- Can be difficult to access and install without lifting the engine or removing nearby components
- Not an upgrade for performance or stiffness—solely a like-for-like replacement
Verdict Pick this GM Genuine Parts engine mount if you want a proven, factory-quality fix for vibration instead of a cheaper but less reliable aftermarket part.
7. Mardarth Engine and Transmission Mount Set for 2009–2019 Chevrolet Traverse 3.6L
| Compatibility | 2009-2019 Traverse Enclave Acadia Saturn 3.6L Automatic Transmission |
|---|---|
| Finish Type | Powder Coated |
| Unit Count | 4.0 Count |
| Manufacturer | Mardarth |
This Mardarth kit supplies the front and rear motor mounts plus the torque strut and transmission mount needed when worn mounts cause vibration or engine movement on 3.6L Traverse-family vehicles. It is sold as a complete set intended for direct replacement of the factory mounts, so installation typically restores quiet idle and reduces vibration during acceleration. The mounts are powder-coated for corrosion resistance and the listing references extensive quality testing and multiple compatible part numbers for fitment clarity. Practical benefits include receiving all four mounts in one package and generally straightforward installation for a competent DIYer or mechanic. Limitations to consider are that this is an aftermarket assembly rather than a factory-branded part and longevity can vary by driving conditions; a few reviews note early failures while most report good fit and vibration reduction. If exact factory-match materials or an extended warranty are a priority, a different option may be preferable.
Best for: Buyers seeking a balanced, all-around replacement that restores ride comfort and reduces vibration without sourcing individual parts separately; good for owners who want a one-stop kit and practical value.
Less Ideal for: Drivers who prioritize factory-branded mounts, longest possible service life, or extended dealer-backed warranty should consider OEM replacements or higher-end performance mounts instead.
- Complete four-piece kit replaces front, rear, torque strut and transmission mounts in one purchase
- Powder-coated finish helps resist corrosion for longer service life in road conditions
- Listed compatibility and multiple referenced part numbers simplify confirming fit for 2009–2019 Traverse 3.6L vehicles
- Aftermarket construction may not exactly match factory materials and some users report early failures
- Limited warranty period noted in listing is short compared with extended dealer coverage
Verdict A convenient four-piece replacement kit that restores quiet and stability for 3.6L Traverse-family vehicles while offering good value for balanced buyers, though it is an aftermarket option rather than a factory part.
Choosing the Right Chevrolet Traverse Engine Mount: Key Factors to Consider
Fitment and Vehicle-Specific Compatibility
Correct fitment ensures the mount aligns with the engine and subframe attachment points. A mount that matches factory geometry reduces stress on the engine and transmission, prevents misalignment of driveshafts or CV joints, and keeps sensors and linkages in their intended positions.
When a mount is an exact fit, installation is simpler and torque specifications align with factory procedures. Poorly fitting mounts can cause accelerated wear of other components and may require additional modifications or hardware to install.
Material and Construction Quality
Mount materials determine how well the unit resists fatigue, heat, and exposure to fluids. Solid metal components, robust bushings, and reinforced bonding between rubber and metal typically offer longer life under engine torque and road loads.
Construction quality also affects noise and vibration isolation. Higher-grade elastomers and proper bonding techniques help absorb vibration, whereas cheaper materials may crack or delaminate sooner, leading to increased cabin noise and reduced comfort.
Vibration Isolation Performance
Effective isolation reduces the amount of engine vibration transmitted to the chassis and passenger compartment. This affects perceived refinement and can influence the longevity of nearby components like exhaust hangers and intake plumbing.
Consider how the mount handles different frequencies and loads. Some designs prioritize comfort and absorb low-frequency vibrations, while others focus on controlling movement under acceleration and heavy load. Match the isolation characteristics to typical driving patterns.
Load Capacity and Torque Control
Engine mounts must withstand the static weight of the powertrain and dynamic loads from acceleration, braking, and cornering. A mount designed with adequate load capacity will limit excessive engine movement and protect linkages and hoses from strain.
Torque-control features, such as fluid or hydraulic chambers in some mount designs, can dampen transient torque reactions. Evaluate mounts for the expected engine torque and any additional loads, like light towing or carrying heavy cargo.
Durability and Environmental Resistance
Durability determines service intervals and long-term ownership costs. Look for corrosion-resistant metals, sealed components, and elastomers rated for heat, oil exposure, and ozone to ensure reliable performance over time.
Environmental resistance matters in regions with road salt, extreme temperatures, or frequent short trips. A durable mount minimizes the chance of premature failure that could lead to vibration, noise, or increased wear on connected parts.
Serviceability and Installation Considerations
Serviceability influences how easily you can replace the mount. Features like accessible mounting points, included hardware, or compatible bolt patterns reduce labor time and potential for installation errors.
Consider whether special tools or engine support methods are required during replacement. Easier installation lowers the chance of improper torqueing or alignment, which can affect performance and safety.
FAQ
What are common signs that a Chevrolet Traverse engine mount is failing?
Common signs include increased engine vibration felt in the cabin, clunking or knocking during acceleration or deceleration, and visible movement of the engine under load. You may also notice unusual driveline shuddering or premature wear of nearby components. If you see cracked rubber or fluid leaks on a mount, those are strong indicators it needs attention.
Can I replace an engine mount myself on a Chevrolet Traverse?
Replacing an engine mount is feasible for someone with mechanical experience and the right tools, including engine support and torque wrenches. The job often requires supporting the engine while removing and installing bolts to correct torque specifications. If you are unsure about safe engine support or torque procedures, consult a professional to avoid misalignment or damage.
How long do engine mounts typically last on a Chevrolet Traverse?
Engine mount lifespan varies based on driving habits, environmental exposure, and vehicle load. Many mounts last well over 60,000 miles under normal use, but frequent short trips, aggressive driving, or exposure to oil and road chemicals can shorten that. Regular inspection helps catch deterioration before it causes other issues.
Will a bad engine mount cause excess vibration only when idling?
Not necessarily. A failing mount often increases vibration at idle but can also cause more noticeable movement and noise during acceleration, gear changes, or when putting the vehicle under load. The symptoms depend on which mount has failed and how it affects engine positioning and isolation.
Are there different types of engine mounts to consider?
Yes. Mounts range from solid rubber designs to hydraulic or fluid-filled types that offer better damping of transient loads. Each type balances isolation and control differently, so choose one that matches your priorities, whether that is comfort, load control, or durability in demanding conditions.
How We Chose the Best Chevrolet Traverse Engine Mount
We shortlisted engine mounts for the Chevrolet Traverse using criteria that reflect real-world ownership and maintenance. Core evaluation factors included material quality and construction to judge longevity, exact fit and OEM-style attachment points to ensure proper alignment and reduced drivetrain stress, and vibration isolation performance to limit cabin noise and harshness. We also considered serviceability, such as accessibility for removal and replacement, and corrosion resistance for mounts exposed to road salt and moisture. We excluded mounts with unclear specifications, incompatible fitment information, or poor fit records. We did not consider unrelated accessories or mounts intended for other powertrain layouts. The final list focuses on mounts that balance durability, correct fit, and effective vibration control for typical driving and light towing duties with the Chevrolet Traverse.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Chevrolet Traverse engine mount, prioritize correct fitment and material quality to ensure proper alignment and long service life. Balance vibration isolation against the need for torque control based on your driving habits and any additional loads. Consider ease of installation and corrosion resistance as secondary priorities that affect long-term ownership. Regular inspection and addressing symptoms early will prevent secondary damage and keep the powertrain operating smoothly.
Explore More:
- Check out all Chevrolet Traverse parts & accessories
- Explore Engine
- Browse all Auto Parts
