Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Choosing the right engine mount for your Chevrolet Equinox matters because mounts isolate vibration, protect drivetrain components, and affect long-term reliability. A worn or damaged mount can cause excess engine movement, unusual noises, and accelerated wear on other components, so picking a suitable replacement helps preserve vehicle performance and comfort. This guide shortlists the top options for Chevrolet Equinox engine mount needs and explains the key factors we considered, including fitment accuracy and material durability. Read on to see which mounts made the list and why they are good matches for common Equinox repair scenarios.
Looking for other parts? See all Chevrolet Equinox parts & accessories.
Top Picks at a Glance
1. JDMON Engine and Transmission Mount Kit for 2010–2017 Chevrolet Equinox & GMC Terrain 2.4L
| Applicable Models | 2010–2017 Chevy Equinox, 2010–2017 GMC Terrain 2.4L (Auto Trans) |
|---|---|
| Set Quantity | Set of 4 |
| Included Components | Engine Motor mounts and transmission mounts |
| Manufacturer | JDMON |
This JDMON kit replaces the front engine and transmission mounts on 2010–2017 Chevrolet Equinox and GMC Terrain 2.4L models with automatic transmissions. Designed as a direct-fit factory replacement, the set uses metal and rubber components to isolate vibration, reduce engine noise, and stabilize the powertrain under load. Installation is intended to be done by a professional or a skilled DIYer because correct torque and alignment matter for driveline behavior. Buyers will appreciate the kit covering multiple mount locations so worn mounts can be replaced at once, which restores cabin comfort and can reduce stress on other drivetrain parts. Materials listed — iron, aluminum and rubber — suggest reasonable durability for street use, though longevity will depend on driving conditions and installation quality. The product comes as a set of four and is targeted at owners who need a practical, restorative repair rather than a performance upgrade.
Best for: Reliability-focused owners who prioritize restoring factory comfort and drivability on a Chevrolet Equinox 2.4L rather than performance enhancements.
Less Ideal for: Drivers seeking performance or heavy-duty mounts for racing, towing, or off-road use should consider reinforced aftermarket options instead.
- Direct-fit replacement for 2010–2017 Equinox and Terrain 2.4L automatic transmission models.
- Includes multiple mounts so you can replace worn engine and transmission mounts at once.
- Constructed from metal and rubber to dampen vibration and reduce engine noise.
- Listed compatibility covers factory part numbers for straightforward identification during purchase.
- Requires professional-level installation for best results and correct alignment.
- Durability depends on driving conditions and installation; not marketed as an upgraded performance mount.
Verdict A practical, factory-style mount kit that restores engine stability and cabin comfort for 2010–2017 Equinox/Terrain owners focused on reliable repairs.
2. Yllshengyu 3-Piece Engine Motor Mount Kit (3 pcs)
| Unit Count | 3.0 Count |
|---|---|
| Manufacturer | Yllshengyu |
| Compatible Models (listed) | GM RWD trucks & SUVs (various) |
This three-piece kit replaces the front left, front right, and transmission mounts to restore engine positioning and reduce vibration and noise. It is sold as a complete set meant for straightforward replacement when mounts are worn or damaged. The listing highlights direct fitment to a range of GM rear-wheel-drive trucks and SUVs and claims manufacturing to meet or exceed factory specifications for durability and torque control. In practical terms the kit should simplify repairs by providing the common mounting pieces in one package, reducing parts hunting and multiple orders. Important limitations: the product is described for RWD GM models and the fitment guidance in some customer feedback suggests checking drivetrain specifics carefully before buying; installation may still require a shop for proper alignment and torqueing. If your Equinox is front-wheel-drive or has different mounting requirements, this kit will not be appropriate and a model-specific mount is required.
Best for: A convenience-driven buyer who wants a ready-made kit to replace several worn mounts in one purchase and minimize time spent sourcing parts.
Less Ideal for: Buyers who prioritize exact model-specific fitment for the Chevrolet Equinox or need mounts for front-wheel-drive setups should look for mounts confirmed for that vehicle instead.
- Complete three-piece kit covers both engine side mounts and the transmission mount so you get all commonly replaced pieces at once.
- Manufacturer states parts are made to meet or exceed factory-quality specifications for fit and vibration control.
- Multiple listed OE part numbers increase the chance of direct fit for compatible GM applications.
- Advertised compatibility is limited to rear-wheel-drive GM trucks and SUVs, so it likely does not fit the front-wheel-drive Chevrolet Equinox.
- Fitment guidance in the listing and some reviews is inconsistent, so verification of exact mount type is necessary before purchase.
- Installation typically requires lifting and engine support and may need professional installation for correct alignment.
Verdict Handy three-piece kit for customers needing multiple mount replacements at once, but verify drivetrain and Equinox-specific fitment before buying.
3. A-Premium Engine and Transmission Mount Kit (4-Piece) for Chevrolet Equinox & GMC Terrain 2.4L
| Vehicle fitment | Chevrolet Equinox 2010–2017; GMC Terrain 2010–2017; Captiva Sport 2012–2015 L4 2.4L |
|---|---|
| Pieces included | Set of Four (1 front motor mount, 3 transmission mounts) |
| Manufacturer part number | APEM206 |
| Guarantee | 1-year unlimited-mileage guarantee |
This A-Premium kit supplies one front motor mount and three transmission mounts to replace the factory mounts on 2.4L naturally aspirated Equinox and Terrain models. It is intended for a full mount refresh when vibration, clutch or transmission movement, and engine rocking become noticeable. The listing emphasizes rigorous testing and materials to meet factory-quality fit and function, and users report good fit and a solid feel after installation. For performance-oriented drivers the firmer mounts can reduce engine movement under load, improving shift feel and throttle response compared with worn rubber mounts. Installation requires basic mechanical access and is typically done as a set to restore balanced support across the powertrain. Expect a firmer ride and slightly more transmitted vibration compared with soft or hydraulic mounts, and professional installation may be needed for some positions due to tight clearances. The kit covers the common OEM reference numbers for the 2.4L family and comes with a one-year unlimited-mileage guarantee from the brand.
Best for: Performance-oriented buyers who prioritize reduced engine movement and sharper shift feel and who plan to replace all mounts at once to restore drivetrain control.
Less Ideal for: Buyers seeking the smoothest possible ride or those who prefer vibration-isolating hydraulic mounts should consider alternatives optimized for comfort.
- Complete four-piece set replaces both engine and transmission mounts for a single install session
- Manufacture claims and user feedback indicate a snug, factory-style fit and solid build
- Designed and tested to meet factory-quality performance for the 2.4L naturally aspirated engines
- Includes parts that map to common OEM reference numbers for straightforward sourcing and fitment verification
- Firmer replacement mounts can increase NVH compared with softer or hydraulic mounts
- Some install positions may require professional tools or mechanic assistance due to limited access
Verdict A complete, performance-minded mount kit that tightens drivetrain control and restores factory-style support for 2.4L Equinox/Terrain models, at the cost of slightly firmer NVH.
4. Hihaha Rear Engine Mount for Chevrolet Equinox (2018–2020)
| Vehicle compatibility | Chevrolet Equinox 2018-2020 |
|---|---|
| Position | Rear |
| Material | Metal and rubber |
| Manufacturer | Hihaha |
This Hihaha rear engine mount is a straightforward, budget-minded replacement for the Chevrolet Equinox 2018–2020. It mounts in the rear position and pairs a metal bracket with a rubber isolator to limit engine movement and absorb vibration before it reaches the cabin. Installation is described as direct-fit so it can be swapped in place of a worn mount without modification, making it suitable for DIY mechanics or quick shop jobs. The practical benefit is improved ride comfort and reduced drivetrain vibration compared with a failed mount, and the metal construction should provide adequate durability for everyday driving. It is a non-factory replacement part, so buyers should expect basic aftermarket fit and finish rather than a factory-identical unit. The product listing provides the OE reference number for cross-checking, but buyers should verify fitment before ordering. If you need a low-cost, functional replacement to restore normal engine support and reduce noise, this mount delivers the essentials without extras.
Best for: Budget-conscious buyers who need an affordable, no-frills replacement to stop vibration and restore engine support on a Chevrolet Equinox 2018–2020 and prefer a straightforward DIY or quick-shop fix.
Less Ideal for: Drivers seeking a factory-identical mount with guaranteed OEM tolerances or those who prioritize long-term high-mileage durability over initial cost should consider higher-end or dealer-sourced alternatives.
- Direct-replacement design for Chevrolet Equinox 2018–2020 simplifies installation
- Metal bracket with rubber isolator reduces engine vibration transmitted to the cabin
- Single-piece unit is compact and straightforward to handle during DIY replacement
- Low-cost option that restores engine support without complex sourcing
- Aftermarket, non-factory part so fit and finish may not exactly match OEM levels
- Limited data on long-term durability compared with manufacturer parts
Verdict A practical, low-cost rear engine mount that restores engine support and reduces vibration for Equinox 2018–2020 buyers who prioritize budget over OEM exactness.
5. JDMON 4-Piece Engine and Transmission Mount Kit for Chevrolet Equinox/GMC Terrain V6
| Unit Count | 4.0 Count |
|---|---|
| Manufacturer | JDMON |
| Batteries Required? | No |
This JDMON kit supplies the four mounting pieces needed to replace worn engine and transmission mounts on Chevy Equinox and GMC Terrain V6 models. Intended for use as a direct replacement for the listed factory part numbers, the mounts are steel and rubber assemblies meant to absorb engine movement and vibration, so you should notice less noise and smoother operation after installation. The set is typically installed by a professional or experienced DIYer because alignment and torque specs matter for driveline reliability. Notable features include compatibility with multiple factory reference numbers and construction combining metal and rubber for durability under normal driving conditions. The practical benefits are reduced engine shake, improved ride comfort, and protection for adjoining components. Important limitations are that this is an aftermarket kit so fit and finish can vary from factory-quality parts, and installation requires proper tools and experience to avoid misalignment or premature wear.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like ride comfort and reducing engine vibration with a straightforward replacement rather than performance upgrades.
Less Ideal for: Drivers seeking OEM-branded mounts for exact factory finish or those wanting performance-oriented or upgraded mounts designed for increased power handling.
- Complete four-piece kit covers engine and transmission mounting points for the V6 Equinox/Terrain
- Constructed from metal and rubber to absorb vibration and protect adjacent components
- Lists compatible factory reference numbers to simplify part matching
- Aftermarket fit and finish may differ from factory-quality mounts
- Installation requires mechanical skill and proper tools for correct alignment
Verdict A practical four-piece aftermarket mount kit that restores engine support and reduces vibration for Equinox/Terrain V6s, best if you want a direct replacement without performance upgrades.
6. Yllhaoyuan Complete 4-Piece Engine & Transmission Mount Set for Chevy Equinox/GMC Terrain 2.4L
| Vehicle fit | Chevy Equinox 2010-2017 / GMC Terrain 2010-2017 2.4L |
|---|---|
| Unit count | 4 pieces |
| Manufacturer | Yllhaoyuan |
| Part coverage | Replaces A5633, A5659, A5562, A5618 and multiple OEM numbers |
This kit supplies the four mounts commonly replaced together on 2.4L Chevy Equinox and GMC Terrain vehicles to stop excessive engine movement and cabin vibration. It is used as a direct replacement set when worn mounts cause idle shake, harsh shifting, or driveline noise; installers typically swap the mounts one at a time using floor jacks to support the engine and transmission. The set is marketed as factory-style fit with reinforced metal brackets and high-density vibration-dampening rubber to restore alignment and reduce stress on surrounding components. Buyers report the mounts eliminate noticeable vibration and improve ride smoothness when installed correctly, though some transmission-mounts can be tight to fit and may require patience, bolt manipulation, or minor bolt trimming during reinstallation. The kit is a practical, budget-oriented alternative to dealer parts and is suitable for DIY mechanics who are comfortable with moderate under-hood work and using support jacks.
Best for: Practical optimizers looking to restore ride comfort and reduce vibration on a budget who prefer to do the work themselves or hire a local shop for a straightforward replacement.
Less Ideal for: Buyers seeking a lifetime performance upgrade or hardened motorsport mounts should consider specialty or performance-oriented options instead.
- Complete 4-piece kit covers all engine and transmission mounts needed for a full drivetrain stabilization in the 2.4L Equinox/Terrain
- Engineered to match factory fit for straightforward bolt-on replacement in most cases
- Reinforced metal brackets and dense rubber compound aim to reduce vibration and harshness after installation
- Multiple users report clear reduction in cabin shake and improved driving comfort post-install
- Some transmission mounts are difficult to align and install due to tight clearances and long bolts
- Fitment and ease of install can vary by submodel or drivetrain configuration, so verification before installation is necessary
Verdict A full, budget-friendly mount kit that restores stability and cuts cabin vibration for 2.4L Equinox/Terrain owners who want a practical DIY fix.
7. Mardarth Engine and Transmission Mounts Set of 4 for 2010–2017 Captiva/Equinox/Terrain 2.4L
| Compatibility | 2010–2017 Captiva/Equinox/Terrain 2.4L |
|---|---|
| Unit count | 4 |
| Mounting type | Chassis Mount |
| Finish type | Polished |
This Mardarth kit supplies all four engine and transmission mounts needed when worn mounts cause vibration, noise, or driveline movement on a 2010–2017 Chevrolet Equinox 2.4L. The set includes the right engine mount and multiple transmission mounts to mirror the factory layout and is marketed as a direct replacement for the referenced part numbers. In practical use the mounts install in the factory locations and are aimed at drivers replacing failing rubber mounts to restore a quieter, smoother ride and more stable shifting feel. Buyers report accurate fitment and noticeably reduced engine vibration after installation. The kit is a cost-effective aftermarket option compared with dealer parts, but longevity may vary versus higher-end factory-quality units and professional installation is recommended if you lack mechanical experience. If your Equinox shows motor movement, this package covers the typical repair in one purchase and simplifies sourcing all required pieces at once.
Best for: Buyers seeking a balanced, practical replacement solution for a Chevrolet Equinox 2.4L who want a complete kit that restores ride comfort and driveline stability without paying dealer prices.
Less Ideal for: Drivers prioritizing maximum long-term durability or factory-sourced parts should consider higher-end branded or dealership replacements instead.
- Complete 4-piece kit replaces both engine and transmission mounts so you get all necessary components in one purchase.
- Designed to fit 2010–2017 Equinox 2.4L according to listed part references, which simplifies compatibility checks.
- Reported to fit accurately and noticeably reduce engine vibration and noise after installation.
- Lower cost than dealer or specialty parts while matching the factory mounting layout.
- Aftermarket construction may not match the long-term durability of higher-end factory-quality mounts.
- Limited to the specific 2.4L Captiva/Equinox/Terrain fitment and not applicable to other engines or model years.
- Manufacturer warranty is short-term compared with some branded alternatives.
Verdict A budget-friendly, complete mount kit that reliably restores fit and reduces vibration on 2010–2017 Equinox 2.4L models, though it may not match premium factory-quality longevity.
Choosing the Right Chevrolet Equinox Engine Mount: Key Factors to Consider
Fitment and Compatibility
Accurate fitment ensures the mount lines up with factory mounting points and bolt patterns. A mount that matches the Equinox-specific engine and transmission configuration reduces the need for additional adjustments or modifying brackets, which can introduce stress points and alignment issues.
Compatibility also affects installation time. Parts designed specifically for the Chevrolet Equinox typically come with the correct bushings and hardware, so the mount integrates cleanly with existing components and maintains proper driveline geometry.
Material and Construction
Mounts are made from combinations of metal and elastomer or fluid-filled designs; material choice affects durability and vibration damping. High-quality metals resist corrosion and fatigue, while engineered elastomers maintain elasticity under heat and oil exposure, preserving isolation properties.
Robust construction helps the mount withstand daily thermal cycles and road shock. Look for mounts with reinforced mounting plates, durable bushings, and corrosion-resistant finishes to extend service life and reduce the chance of premature failure.
Vibration and Noise Isolation
A primary job of the engine mount is to isolate engine vibration and limit noise transmission to the cabin. Different designs and stiffness levels influence how much vibration is transferred; softer mounts reduce NVH but may allow more engine movement under load.
Consider the balance between isolation and control. For routine driving, mounts that focus on comfort reduce perceived vibration and noise, while stiffer designs or torque-specific mounts better control engine movement during acceleration and deceleration.
Torque Control and Stability
Torque mounts and designs that resist rotational movement help maintain drivetrain alignment when the engine produces torque spikes. Effective torque control reduces strain on transmission mounts, drive axles, and exhaust hangers, which can prevent cascading failures.
Evaluate how the mount handles dynamic loads. A mount that limits engine roll improves throttle response and reduces clunking or shifting sensations during gear changes or sudden acceleration.
Installation and Serviceability
Ease of installation affects labor time and the ability to do the job yourself. Clear mounting points, standard hardware, and access to replacement bushings make service easier and safer. Some mounts require engine support tools or minor bracket removal, so knowing the installation steps ahead of time helps plan the repair.
Also consider whether the mount uses reusable hardware or includes new fasteners. Proper torque specifications and accessible mounting bolts reduce the risk of improper installation that could compromise fitment or safety.
Expected Lifespan and Maintenance
Mount longevity depends on driving conditions, exposure to oil and heat, and material quality. Parts designed with durable elastomers and reinforced metal components typically last longer under normal use.
Plan for inspection intervals after installation, since early detection of wear or cracking prevents secondary damage. Knowing typical failure modes helps you recognize motor mount signs and schedule maintenance before symptoms worsen.
FAQ
What are common symptoms of a failing engine mount in a Chevrolet Equinox?
Common signs often include increased vibration felt in the cabin, clunking or banging during acceleration and deceleration, and excessive engine movement when shifting. You may also notice abnormal noise or changes in handling that correlate with engine load.
Can I replace a Chevrolet Equinox engine mount myself?
Replacing a mount is possible for owners with mechanical experience and the right tools, such as an engine support and torque wrench. It usually requires supporting the engine while removing mounting bolts and following proper torque specifications. If you are unsure or lack equipment, a professional installation is advisable.
How long do engine mounts typically last on the Equinox?
Lifespan varies with driving style and conditions, but mounts usually last several years under typical use. Exposure to oil leaks, rough roads, or repeated heavy loads can accelerate wear, so inspect mounts if you notice motor mount signs or changes in ride quality.
Will a bad engine mount cause vibration at idle?
Yes, worn or degraded mounts often allow more engine vibration to transmit into the chassis, making idle vibration more noticeable. However, vibration at idle can also stem from ignition or fuel system issues, so inspect mounts alongside other potential causes.
What should I know about torque mounts and stability?
Torque mounts are designed to limit engine rotation under load, which reduces drivetrain stress and improves responsiveness. They tend to be firmer than comfort-oriented mounts, so expect a tradeoff between reduced engine movement and a slightly firmer feel during normal driving.
When should a mount be inspected after replacement?
Check the mount after initial break-in driving and again at routine service intervals, especially if you notice any new noise, vibration, or visual signs of rubber degradation. Early inspections help confirm correct installation and detect issues before they lead to additional component wear.
How We Chose the Best Chevrolet Equinox Engine Mount
We prioritized parts that match factory fitment for Chevrolet Equinox applications, focusing on correct mounting points, bolt pattern accuracy, and compatibility with the vehicle's engine and transmission layouts. Durability was judged by construction materials and design features that resist oil, heat, and road stress, since long-lasting mounts reduce repeat repairs. Vibration control and noise isolation were evaluated because the mount must minimize engine movement and cabin vibration while maintaining drivetrain alignment. Ease of installation and the availability of clear fitment instructions were considered to help DIYers and professional mechanics. We excluded components that lack documented fitment for the Equinox or that use unclear or generic mounting hardware, and we did not consider parts with inconsistent quality reports or missing technical specifications. The resulting list reflects parts that meet fitment, durability, vibration control, and installation criteria relevant to Chevrolet Equinox owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a replacement for a Chevrolet Equinox engine mount, prioritize accurate fitment, durable materials, and the right balance between vibration isolation and torque control. Consider how you drive and whether you need a comfort-oriented mount or a stiffer torque-focused design, and factor in ease of installation if you plan to do the work yourself. Routine inspection after installation helps ensure the mount is performing as intended and prevents secondary damage. Use the evaluation criteria above to weigh tradeoffs and select the option that best matches your vehicle usage and maintenance preferences.
Explore More:
- Check out all Chevrolet Equinox parts & accessories
- Explore Engine
- Browse all Auto Parts
