Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right Chevrolet Impala engine mount matters because a worn or incorrect mount can cause excess vibration, drivetrain strain, and degraded ride comfort. You want a mount that restores proper engine position, isolates vibration, and holds up to daily driving demands. This guide highlights seven shortlisted engine mounts that meet common fitment and durability requirements. We evaluated each option for build quality and compatibility so you can quickly find a suitable replacement. Read on for the criteria we used and practical tips to help with installation and selection.
Looking for other parts? See all Chevrolet Impala parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | PATEWIN Engine and Transmission Mount Kit for 2006–2011 Chevrolet Impala 3.5L (6‑Piece) |  |
| Most Popular A crowd favorite that many people choose with confidence | Dorman 917-000 Engine Mount Bracket |  |
| Best Quality Built to a higher standard if you want something more solid | YEOPGYEON Engine Motor Mount Set for Chevrolet Impala 3.6L (Set of 4) |  |
| Best Budget The cheapest option that still gets the job done reliably | ApplianPar Front Torque Strut Mount Kit for Chevrolet Impala/Monte Carlo |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium 4‑Piece Engine and Transmission Mount Kit for Chevrolet Impala 3.6L V6 |  |
| Best Value for Money The sweet spot between price and what you get | TRQ Front Engine Torque Strut Mount Set (4-Piece) for Chevrolet Impala / Monte Carlo |  |
| Best Overall The best all-around choice for most situations | A-Premium 6-Piece Engine and Transmission Mount Kit for Chevrolet Impala (2006–2011) |  |
1. PATEWIN Engine and Transmission Mount Kit for 2006–2011 Chevrolet Impala 3.5L (6‑Piece)
| Mounting Type | Engine & Transmission Mount |
|---|---|
| Finish Type | Powder Coated or Painted |
| Unit Count | 6.0 Count |
| Manufacturer | PATEWIN |
This PATEWIN mount kit supplies the three motor mounts, two torque strut mounts, and one transmission mount needed to refresh the powertrain mounting on a 2006–2011 Chevrolet Impala 3.5L. Installed as a direct replacement, the kit reduces engine vibration and stabilizes the driveline so idling is smoother and harsh engine movement under acceleration is minimized. The mounts are offered with a painted or powder-coated finish and the vendor states they are produced to a factory-spec design for fitment that matches the listed interchange numbers. For a reliability-focused buyer this kit is convenient because it replaces all wear-prone mounts at once, which can save repeat labor and restore original chassis behavior. Expect straightforward installation with common tools, though one customer reported a defect on arrival so inspect brackets immediately and be prepared to swap a piece or request a replacement. This is a practical, full-kit option for restoring quiet operation and engine control on the specified Impala and Monte Carlo models.
Best for: Drivers who prioritize dependable, single-service repairs and want to restore factory-like smoothness on a 2006–2011 Impala 3.5L without multiple trips to the parts store.
Less Ideal for: If you need upgraded performance mounts for track use or significantly stiffer aftermarket tuning, this factory-style replacement kit is not the right choice.
- Complete 6-piece kit replaces all motor mounts, torque strut mounts, and the transmission mount in one purchase
- Designed to match listed interchange part numbers for direct fit on the specified vehicle models
- Powder coated or painted finish helps resist surface corrosion
- Addresses vibration and rough idling by stabilizing the engine and driveline
- Some customers reported arrival damage or manufacturing defects on individual brackets
- Not backed by detailed lab test data in the product listing to verify long-term durability
Verdict A practical, all-in-one replacement kit that restores engine stability and reduces vibration for the specified Impala models, but inspect parts on arrival for possible defects.
2. Dorman 917-000 Engine Mount Bracket
| Manufacturer | Dorman Products |
|---|---|
| Model | 917-000 |
| OEM Part Number | 24506488 |
| Compatible Vehicle | Select Chevrolet Impala years listed in description |
This Dorman engine mount bracket is a precision replacement intended to restore the engine support on compatible Chevrolet Impala model years. It installs where the original bracket failed and is used to secure the engine to the subframe so vibration and movement are controlled. The part is cast construction and finished in black, and Dorman advertises it as engineered to match the factory mounting points so bolt holes and ears align without modification on many installs. Buyers will appreciate its sturdier-than-stock feel reported by users and straightforward fit on common Impala years. Expect typical under-vehicle installation steps—raise and support the engine, remove the old bracket, and bolt the replacement in place. Limitations: this is a direct-fit part for specific years only so you must confirm fit for your exact Impala year and trim, and its heavier cast construction can differ from the original aluminum design which may change vibration characteristics slightly. Overall it is a practical replacement when the factory bracket is cracked or broken and you want a durable, ready-to-install option.
Best for: Convenience-driven buyers who want a straightforward, bolt-on solution to replace a broken engine mount bracket on their Chevrolet Impala and avoid sourcing used parts or complex fabrication.
Less Ideal for: Drivers seeking a component that exactly matches the original aluminum feel or those who need a universal or multi-vehicle solution should look elsewhere.
- Direct replacement designed to match factory mounting points for many Impala model years
- Cast construction offers stronger, more durable support than many original aluminum brackets
- Ready-to-paint black finish for a clean appearance after installation
- Multiple customer reports of straight bolt-on fit with no modification required
- Fits only specific model years and trims so compatibility must be verified before purchase
- Heavier cast design differs from original material and may alter vibration feel slightly
Verdict A durable, ready-to-install replacement bracket for select Chevrolet Impala years that prioritizes fit and long-term strength over matching original aluminum construction.
3. YEOPGYEON Engine Motor Mount Set for Chevrolet Impala 3.6L (Set of 4)
| Compatible vehicles | Chevrolet Impala 2012-2013, Impala Limited 2014-2016 V6 3.6L |
|---|---|
| Included parts | Set of 4 mounts (front, rear, torque strut, transmission left) |
| Material | Rubber and heat-treated steel |
| Mounting type | Floor Mount |
This YEOPGYEON engine motor mount set replaces the front, rear, torque strut, and left transmission mounts on 3.6L Chevrolet Impala models and is intended to restore factory-style engine support. The mounts combine heat-treated steel with rubber to absorb vibration, limit engine movement under load, and reduce noise transferred to the cabin. Installation is straightforward for a mechanic or experienced DIYer since the parts are vehicle-specific and require no modification. For performance-minded drivers the firmer rubber durometer and tested construction help maintain driveline alignment during spirited acceleration and maintain smoother shifting by stabilizing the transmission. The kit is built to be durable, but heavier-duty aftermarket mounts can transmit more vibration; if you prefer the softest ride possible another option may be better. Expect a clear improvement in rough-idle vibration and engine rocking compared with worn mounts, with the practical benefit of restoring confidence in acceleration and steering feel.
Best for: Performance-oriented Impala owners who prioritize restoring firm, factory-quality engine control and reducing driveline movement for better throttle response and shift feel.
Less Ideal for: Drivers seeking extremely stiff, race-oriented mounts or those who want the softest possible ride for maximum NVH isolation should consider specialized alternatives.
- Complete four-piece kit covers engine front, rear, torque strut, and left transmission mount for a full replacement
- Heat-treated steel and rubber construction intended to damp vibration and improve driving smoothness
- Vehicle-specific design for Chevrolet Impala 3.6L reduces need for modification during installation
- Rubber-mounted design favors vibration damping over track-focused stiffness so it is not the harshest performance mount option
- No detailed torque specs or installation hardware included in listing which may require access to factory tools or shop service
Verdict A complete, vehicle-specific mount kit that restores engine stability and reduces vibration for performance-focused Impala drivers while remaining closer to factory comfort than race-oriented options.
4. ApplianPar Front Torque Strut Mount Kit for Chevrolet Impala/Monte Carlo
| Fits engines | 3.5L, 3.9L, 5.3L |
|---|---|
| Fit years | Impala 2006-2011, Monte Carlo 2006-2007/2006 |
| Replaces part numbers | A5372, A5263, EM-3090, EM-3104, 10345905, 10345904 |
This ApplianPar torque strut mount kit provides replacement front left and right brackets and mounts intended for Chevrolet Impala 3.5L and 3.9L (2006–2011) and 5.3L (2006–2009), and Monte Carlo engines listed. It is used to reduce engine movement and vibration by securing the engine at the front torque strut points, restoring a firmer feel and eliminating clicking or excessive movement common with worn mounts. Notable features include coverage of multiple replacement part numbers and a two-piece kit that includes both brackets and torque strut mounts so you can service both sides at once. In practice the kit offers a straightforward direct-replacement option for DIYers or independent shops, delivering noticeable improvement in engine stability and NVH for affected models. Limitations are typical of budget aftermarket mounts: finish and weld quality can vary so inspect components during install, and long-term durability may not match higher-end factory-quality units. Expect a cost-effective repair that addresses common symptoms but plan for careful installation and periodic inspection.
Best for: Practical, budget-conscious buyers who need an affordable, direct-replacement fix for noticeable engine movement or noise on qualifying Impala or Monte Carlo models and prefer a cost-effective DIY or independent-shop repair.
Less Ideal for: Buyers seeking a long-term performance or heavy-duty upgrade for high-mileage or modified engines should consider premium or heavy-duty mounts instead.
- Direct-fit replacement for specified Chevrolet Impala and Monte Carlo engines, covering multiple OEM part numbers
- Includes both left and right front brackets and torque strut mounts so both sides can be serviced together
- Addresses common symptoms like engine movement, vibration, and clicking for a clearer driving feel
- Compact kit suitable for DIY installation or fitting by an independent shop
- Budget construction means welds and finish may be inconsistent compared with higher-end or factory-quality mounts
- Long-term durability is less certain than premium replacement options
Verdict A cost-effective, direct-replacement torque strut kit for specific Impala and Monte Carlo engines that restores engine stability but sacrifices some long-term refinement compared with premium mounts.
5. A-Premium 4‑Piece Engine and Transmission Mount Kit for Chevrolet Impala 3.6L V6
| Set Name | 4-Piece Set |
|---|---|
| Item model number | A5718 |
| Manufacturer Part Number | 0APEM313 |
| OEM Part Number | A5718, A5651, A5712, A5625, 3271, 3281, 3272, 3282, 22857330, 20825879, 22946377, 20825887 |
This four-piece engine and transmission mount kit replaces the front motor mount, torque strut, rear motor mount, and center transmission mount on Chevrolet Impala 2012–2013 and Impala Limited 2014–2016 V6 3.6L models with an automatic transmission. It is intended for drivers who want to restore factory-style engine positioning and reduce vibration and drivetrain movement after worn mounts cause noise and harshness. The listing notes testing and quality control aimed at meeting factory-spec standards and the kit ships with all four mounts needed for a full-service replacement. Practical benefits include returning smoother idle and firmer shifting feel with a single purchase instead of hunting individual parts. Limitations are typical of aftermarket mounts: fitment is specific to the listed Impala years and engine, and long-term durability will depend on installation quality and driving conditions despite the manufacturer testing and a one-year guarantee.
Best for: Risk-averse mainstream buyers who prioritize replacing worn mounts with a complete, factory-style kit to restore smoothness and reduce vibration without piecemeal shopping.
Less Ideal for: Shoppers who need mounts for other vehicles or who prefer OEM-branded parts with long-term proven service records should consider alternate sources.
- Complete four-piece kit covers front, rear, torque strut, and center transmission mounts so you can replace all worn mounts at once.
- Marketed and tested to meet factory-spec standards which helps restore original engine position and vibration control.
- Fits the specified Chevrolet Impala V6 3.6L automatic years, simplifying parts selection for that vehicle.
- Includes manufacturer one-year unlimited-mileage guarantee for added short-term protection.
- Compatibility limited to the listed Impala model years and 3.6L V6 automatic transmission only.
- Durability beyond the one-year guarantee is not documented and may vary with driving conditions and installation.
- Requires mechanical skill or professional installation to ensure correct alignment and performance.
Verdict A convenient four-piece aftermarket kit for restoring factory-like engine stability on the specified Chevrolet Impala V6 models, best for buyers who want a complete replacement with short-term warranty coverage.
6. TRQ Front Engine Torque Strut Mount Set (4-Piece) for Chevrolet Impala / Monte Carlo
| Fitment | Chevrolet Impala 2006-2011, Monte Carlo 2006-2007 |
|---|---|
| Quantity | 4 Piece Kit |
| Includes | Support Bracket |
This TRQ four-piece torque strut mount set replaces the front engine wishbone mounts on compatible Chevrolet Impala and Monte Carlo models and is intended as a direct-fit, do-it-yourself replacement. It comes as a kit with four pre-assembled strut mounts and a support bracket so you can swap worn or broken mounts without fabrication. In everyday use the mounts reduce engine movement under throttle and when shifting, restoring firmer feel to the drivetrain and reducing clunks caused by failing bushings. The product positions itself for DIYers by offering video resources and clear fitment references to confirm compatibility. Buyers should note mixed feedback on long-term durability from some users, so while the kit offers easy installation and correct fitment, it may not match heavy-duty OE-quality longevity in all cases. Expect a straightforward repair that improves drivability quickly, but be prepared to monitor the parts if the vehicle sees high mileage or aggressive use.
Best for: Practical optimizers who want a cost-effective, do-it-yourself repair that restores normal engine movement and drivetrain feel without chasing premium performance upgrades.
Less Ideal for: Drivers seeking heavy-duty or performance-grade mounts for high-power or high-mileage applications should consider reinforced aftermarket options or professional-grade replacements.
- Sold as a complete four-piece kit including support bracket for a full front-side replacement
- Pre-assembled direct-fit design simplifies DIY installation and reduces install time
- Manufacturer supplies installation videos and resources to guide repairs
- Compatible specifically with 2006–2011 Chevrolet Impala and 2006–2007 Monte Carlo front mounts
- Some users reported early failure or low durability on certain units
- Not positioned as a heavy-duty or performance upgrade compared with reinforced aftermarket alternatives
Verdict A budget-friendly direct-fit kit that makes a quick DIY repair to reduce engine movement, though long-term durability can vary.
7. A-Premium 6-Piece Engine and Transmission Mount Kit for Chevrolet Impala (2006–2011)
| Vehicle fitment | Chevrolet Impala 2006-2011, Monte Carlo 2006-2007 3.5L |
|---|---|
| Package contents | 6-piece set (transmission mount, motor mounts, torque strut mounts, brackets) |
| Manufacturer part number | APEM107 |
This six-piece kit replaces the engine mounts, torque strut mounts, brackets, and transmission mount found on late-2000s Chevrolet Impala and compatible Monte Carlo V6 models. Intended as a full replacement set, the parts let you change all major mounting points in one job rather than sourcing individual pieces. The listing notes factory-style materials and testing aimed at meeting OEM performance, which in use translates to reduced engine movement, less vibration through the chassis, and smoother shifting when the mounts are installed correctly. Buyers report generally straightforward installations and noticeable improvement in engine stability, though a few users encountered mismatched stud threads or bolt-fit issues that required swapping nuts or minor hardware adjustments. The kit includes the primary mounts and brackets needed for a complete refresh, but expect to double-check fastener fitment before torqueing down. For a balanced buyer wanting a single-purchase replacement set, this is a practical option with good value, provided you have the tools or mechanical skill to handle occasional fitment quirks.
Best for: A balanced all-round buyer seeking a single, budget-conscious solution to refresh all major engine mounting points on a late-2000s Chevrolet Impala and willing to handle basic mechanical work.
Less Ideal for: Not a good choice for buyers who want a guaranteed perfect factory-fit direct swap without any hardware checks or for those seeking premium performance mounts with stiffer materials for aggressive driving.
- Complete six-piece kit replaces engine mounts, torque strut mounts, brackets, and transmission mount in one purchase
- Designed to meet or exceed factory specifications according to the product description
- Most buyers report easy installation and improved engine stability and reduced vibration
- Includes necessary bracket pieces so you can do a full mount refresh without sourcing additional parts
- Some customers reported mismatched stud threads or mounting bolt sizing that required different nuts or hardware
- A few reviews mention a mount or bolt hole alignment issue that required extra fitting or replacement parts
Verdict A convenient, cost-effective full mount kit for late-2000s Impalas that restores engine stability but may need minor hardware adjustments during installation.
Choosing the Right Chevrolet Impala Engine Mount: Key Factors to Consider
Fitment And Vehicle Specificity
Correct fitment is critical because engine mounts must align with factory mounting points to maintain proper engine position and drivetrain geometry. A mount that is labeled specifically for Chevrolet Impala models reduces the risk of misalignment, which can cause driveline vibration, accelerated wear on connecting components, or stress on mounting hardware.
When assessing fitment, check bolt patterns, bracket orientation, and any model-year notes. Even small differences in mounting location or bush orientation can change how the engine sits and behaves under load, so vehicle-specific compatibility is the first filter in choosing a replacement.
Material And Construction
Engine mounts are typically made from rubber bonded to metal, elastomeric compounds, or hydraulic components. The materials determine how well the mount isolates vibration and resists deterioration from heat, oil, and road contaminants. Higher-quality compounds often retain elasticity longer and resist cracking or hardening.
Construction quality also includes how the rubber is bonded to the metal and whether the mount uses reinforced brackets. Robust welds, corrosion-resistant coatings, and durable bushings all contribute to longer service life and more consistent performance.
Vibration Isolation And Comfort
One of the main purposes of an engine mount is to isolate engine vibration from the chassis, which directly affects cabin comfort and perceived noise. Different mount designs offer various levels of damping; soft mounts provide better isolation but can allow more engine movement, while firmer mounts reduce movement at the expense of transmitting more vibration.
Consider how much vibration you are willing to accept versus how tightly you want the engine held. For drivers prioritizing a smooth, quiet ride, mounts with better damping characteristics are preferable. For those focused on performance and reduced engine movement, firmer or torque-specific mounts may be appropriate.
Durability Under Load
Engine mounts must withstand repeated loading from engine torque, acceleration, and road impacts. Durability depends on material resilience and design features that distribute load evenly and avoid stress concentrations. Mounts that degrade quickly can lead to increased engine movement and secondary damage to exhaust, hoses, or wiring.
Look for mounts with proven resistance to oil and heat, reinforced mounting points, and construction intended for longer service intervals. Consider the typical driving conditions the vehicle will see, such as frequent stop-and-go traffic or extended highway driving, as these influence wear patterns.
Installation Complexity And Hardware
Installation factors affect total time and effort required to replace a mount. Some mounts can be swapped using basic hand tools and an engine support, while others require removal of ancillary components or access to tight spaces that complicate installation. The included hardware and clarity of instructions can reduce the chance of improper fitment.
Evaluate whether special tools, engine supports, or lifting equipment are needed. Also check if replacement fasteners or brackets are supplied. Choosing a mount that matches the original mounting arrangement can simplify installation and reduce labor time.
Performance Tradeoffs And Intended Use
Different mounts balance comfort, control, and longevity in different ways. A mount optimized for minimal vibration may allow slightly more engine movement, while a mount designed for stiffer control reduces movement but can transmit more noise. Your priorities—comfort, daily driving durability, or firmer control—should guide the choice.
Consider whether the vehicle sees heavier loads, towing, or spirited driving, as these conditions favor mounts engineered to handle higher torque and stress. Understand the tradeoffs so you can choose a mount that aligns with how you use the vehicle.
FAQ
What are common symptoms of a failing Chevrolet Impala engine mount?
Common signs often include increased vibration felt in the cabin, clunking or banging during acceleration or gear changes, and unusual engine movement when starting or revving. You may also notice misaligned drivetrain components or accelerated wear on connected hoses and wiring. These symptoms usually depend on the severity and location of the worn mount.
Can I do an engine mount replacement myself?
Many mechanically inclined people can replace an engine mount with basic tools and an engine support or jack with a block of wood. The work often requires loosening engine mounting bolts and supporting the engine while swapping mounts. However, some mounts require removing other components or access in tight spaces, so evaluate your experience and the vehicle layout before attempting this job.
How long do engine mounts typically last?
Engine mount life varies depending on material quality, driving habits, and exposure to heat or oil. Under normal driving conditions, mounts often last several years, but frequent heavy loads, rough roads, or fluid leaks can shorten their lifespan. Regular inspection for cracking, separation, or excessive movement helps catch issues early.
Will replacing a worn mount fix vibration and noise issues?
Replacing a worn mount often reduces vibration and eliminates related noise if the mount was the primary cause. However, other factors such as misaligned components, worn transmission mounts, or engine misfires can also produce similar symptoms. If vibration persists after replacing a mount, further diagnosis may be necessary.
Are there tradeoffs between firmer torque mounts and softer comfort-oriented mounts?
Yes, firmer torque mounts generally reduce engine movement and improve response under load but tend to transmit more vibration and noise into the cabin. Softer mounts provide better isolation and comfort but may allow greater engine movement that can stress hoses or exhaust fittings. Choose based on whether you prioritize comfort or tighter control.
How We Chose the Best Chevrolet Impala Engine Mount
We focused on mounts that offer the correct fit and long-term durability for Chevrolet Impala models. Primary evaluation criteria included material quality and construction, correct vehicle-specific fitment, durability under typical driving loads, and vibration isolation performance. We also considered ease of installation from an access and hardware standpoint and whether mounts maintained proper engine alignment to prevent drivetrain stress. We excluded universal or generic mounts that do not list explicit compatibility with Chevrolet Impala models, and we did not include products lacking clear construction or material information. We prioritized mounts with reinforced mounting points and materials designed to resist oil and heat degradation. Finally, practical installation considerations such as the need for engine support or specialty tools were factored into our assessment to reflect real-world replacement experiences.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize correct fitment, durable materials, and the level of vibration isolation that matches your driving priorities. Consider installation complexity and whether the mount’s design suits daily driving, heavier loads, or more demanding use. Balancing comfort and control means accepting tradeoffs between damping and engine movement. Use the factors above to narrow choices to mounts that hold the engine securely while providing the ride quality and longevity you expect.
Explore More:
- Check out all Chevrolet Impala parts & accessories
- Explore Engine
- Browse all Auto Parts
