Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Chevrolet Malibu feels rough at idle or shifts when accelerating, worn engine mounts are often the cause. Choosing the right engine mount affects vibration control, drivetrain alignment, and long-term durability, so picking a suitable replacement matters for daily driving and reliability. This guide highlights seven shortlisted engine mounts that meet common fitment and performance needs. We evaluated candidates for fit accuracy and vibration isolation, and the following sections explain what to look for before you buy.
Looking for other parts? See all Chevrolet Malibu parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | SHERXIBO Set of 3 Engine and Transmission Mount Kit for Chevrolet Malibu 2009–2012 2.4L |  |
| Best quality Built to a higher standard if you want something more solid | A-Premium Engine and Transmission Mount Kit (4-Pc) for Chevrolet Malibu 3.6L Automatic |  |
| Best Value The sweet spot between price and what you get | Vinsyut Engine and Transmission Mount Kit for 2016–2018 Chevrolet Malibu 1.5L (3‑Piece) |  |
| Best Budget The cheapest option that still gets the job done reliably | Motoforti Engine Motor Mount 23356092 for Chevrolet Malibu and Buick Models |  |
| Highest Rated A top-rated pick with lots of positive feedback | GM Genuine Parts 84034314 Engine Mount |  |
| Most popular A crowd favorite that many people choose with confidence | Yllshengyu 4‑Piece Engine and Transmission Mount Kit for Chevrolet Malibu 2013–2015 L4 2.5L |  |
| Best Seller A high-volume bestseller chosen again and again | AutoBuffy Engine & Transmission Mount Set (4-piece) for 2007–2012 Chevy Malibu 3.6L |  |
1. SHERXIBO Set of 3 Engine and Transmission Mount Kit for Chevrolet Malibu 2009–2012 2.4L
| Compatible vehicles | 2009–2012 Chevrolet Malibu 2.4L, 6-speed automatic |
|---|---|
| Set contents | 1 front motor mount, 1 front transmission mount, 1 rear transmission mount |
| Manufacturer | SHERXIBO |
| Interchange numbers | A5398, A5504, A5503, 3118, 3213, 3212 |
This SHERXIBO set supplies the front motor mount plus front and rear transmission mounts needed when replacing worn mounts on a 2009–2012 Chevrolet Malibu 2.4L with the 6-speed automatic. Intended as a direct-fit replacement for the listed part numbers, the kit lets you swap all major mounts in one job to restore engine positioning and reduce vibration transmitted to the chassis and cabin. The listing includes common interchange numbers for fit confirmation and comes packaged as a matched set to simplify installation rather than sourcing parts separately. Practical benefits are improved NVH control after installation and avoiding progressive wear that happens when a single new mount is paired with old mates. Limitations are typical of aftermarket mount kits: fit depends on selecting the correct application and the rubber/hydraulic characteristics may differ from factory-spec mounts, so feel and longevity can vary by driving style. Expect basic fit-and-forget performance for routine driving but budget-minded owners should plan for professional alignment checks if engine positioning was significantly altered during replacement.
Best for: Buyers who want a practical, balanced replacement that refreshes all primary mounts in one service visit and prioritize getting the Malibu back to quiet, stable operation without premium OEM pricing.
Less Ideal for: Drivers seeking an exact factory-matched performance mount or those wanting mounts tuned for aggressive driving and track use should look at performance-specific or OEM options instead.
- Sold as a matched three-piece kit so all main mounts are replaced together
- Lists multiple OEM interchange numbers to help confirm correct fit
- Specifically compatible with 2009–2012 Chevrolet Malibu 2.4L 6-speed automatic applications
- Reduces engine vibration and restores proper engine/transmission alignment when installed
- Rubber and hydraulic characteristics may not exactly match factory-quality mounts which can affect long-term NVH and durability
- Limited number of customer reviews available for long-term reliability insight
Verdict: A convenient matched three-mount replacement kit that restores ride comfort and alignment on 2009–2012 Malibu 2.4L models for buyers seeking a practical, cost-conscious repair.
2. A-Premium Engine and Transmission Mount Kit (4-Pc) for Chevrolet Malibu 3.6L Automatic
| Vehicle fitment | Chevrolet Malibu 2008-2012 V6 3.6L automatic |
|---|---|
| Unit count | 4.0 Count |
| Manufacturer | PremiumpartsWhosale |
| Manufacturer Part Number | APEM521 |
This 4-piece A-Premium mount kit replaces the front motor mount and three transmission mounts for Chevrolet Malibu 2008–2012 V6 3.6L automatic cars. It is supplied as a complete set so you can swap all wearing mounts at once, which reduces vibration, engine movement, and driveline strain when installed. The listing emphasizes rigorous testing and materials chosen to meet or exceed factory-quality specifications, and several user reports note a solid fit and OEM-equivalent feel. Practical benefits include restoring smoother idle and shift feel, reducing noise and harshness, and avoiding repeated labor by replacing all mounts at once. Limitations are that this kit is vehicle- and transmission-specific and only fits the automatic 3.6L application, so it is not a universal solution; buyers should also budget for professional installation if they lack lift access or mechanical experience.
Best for: Performance-oriented buyers who prioritize restoring factory engine control and reducing vibration for a smoother driving and shifting experience on a Chevrolet Malibu 3.6L automatic.
Less Ideal for: Drivers seeking a universal or budget generic mount for multiple vehicles or for manual-transmission conversions should look elsewhere.
- Complete 4-piece kit replaces both motor and transmission mounts to restore stability and reduce vibration.
- Marketed and tested to meet or exceed factory-quality specifications for the specified vehicles.
- Multiple user reports of solid fit and OEM-equivalent performance.
- Includes all mounts needed for a full replacement to avoid repeated shop labor.
- Fits only Chevrolet Malibu/Pontiac G6/Saturn Aura 3.6L automatic applications and will not work on other engines or manual transmissions.
- No installation hardware or detailed fitment guidance beyond vehicle compatibility is provided in the product text.
Verdict: A full, factory-replacement-style mount kit that restores engine stability and NVH for Chevrolet Malibu 3.6L automatics, but only fits that specific application.
3. Vinsyut Engine and Transmission Mount Kit for 2016–2018 Chevrolet Malibu 1.5L (3‑Piece)
| Fitment | 2016–2018 Chevrolet Malibu 1.5L CVT |
|---|---|
| Unit Count | 3 pieces |
| Mounting Type | Engine Mount set |
| Manufacturer | vinsyut |
This Vinsyut kit replaces the rear lower torque strut plus one hydraulic engine mount and one transmission mount to restore engine stability and reduce vibration on 2016–2018 Chevrolet Malibu 1.5L CVT models. It is typically used as a direct replacement when original mounts show cracking, excessive engine movement, clunking on acceleration, or increased vibration at idle. The set is sold as three pieces and uses steel brackets with rubber bushings to control drivetrain movement while absorbing vibration. Practical benefits include restoring smoother idle and shiftfeel, reducing stress on exhaust and other drivetrain components, and getting a full refresh in a single purchase. Installers should support the engine and torque fasteners to spec; buyers may prefer professional installation if they lack tools. As with most aftermarket mounts, long-term durability can vary by driving style and climate, and some buyers may prefer replacing all mounts on the vehicle for complete balance rather than just the three included here.
Best for: Practical optimizers who want a cost-effective way to restore smoothness and drivetrain control on a 2016–2018 Chevrolet Malibu 1.5L without buying individual parts.
Less Ideal for: Buyers seeking a factory-identical set or maximum longevity under heavy-duty use should consider OEM factory-quality mounts or a full-vehicle replacement plan.
- Complete 3-piece kit covers common failure points for the Malibu 1.5L CVT so you can replace multiple mounts at once.
- Steel bracket construction with rubber elements provides effective vibration damping and drivetrain control.
- Multiple user reports indicate good fit and a noticeable reduction in cabin vibration and clunking after installation.
- Kit includes three mounts only so a fourth factory mount may still be original and age-mismatched.
- Longevity can vary versus factory-quality parts depending on driving conditions and climate.
- Some buyers prefer professional installation because correct engine support and torque sequence matter for fit and function.
Verdict: A practical, budget-focused three-piece mount kit that restores smoothness and drivetrain control for 2016–2018 Malibu 1.5L CVT owners, with good fitment reports but variable long-term durability.
4. Motoforti Engine Motor Mount 23356092 for Chevrolet Malibu and Buick Models
| Manufacturer | Motoforti |
|---|---|
| Part Number | amoto240506000673 |
| Material | Metal |
| Item Package Quantity | 1 |
This Motoforti engine motor mount is a straightforward replacement part intended to isolate engine vibration and restore factory-like mounting support on compatible Chevrolet Malibu and Buick models. Built from metal with rubber damping, it reduces driveline vibration transfer into the cabin and is supplied as a single unit for direct replacement. Typical use is as a like-for-like service part when an original mount shows cracking, excessive movement, or vibration; installation is normally performed by a technician because of the need to support the engine during removal. The listing cites the OEM reference 23356092 and emphasizes vehicle-specific fit for Malibu 2016-2018 and 2021 plus several Buick years, so confirm year fitment before buying. As an aftermarket, non-factory product it offers a low-cost way to restore comfort and engine alignment, but buyers should expect possible differences in fitment tolerance and longevity compared with higher-end or factory-quality mounts.
Best for: Budget-conscious owners seeking an inexpensive replacement to reduce engine vibration and restore normal mounting on Malibu-focused builds who prioritize cost savings over premium longevity.
Less Ideal for: Drivers who want the longest-lasting, factory-matching mount or those unwilling to verify exact year-by-year fitment should consider higher-end or OEM-equivalent options.
- Designed to reduce engine vibration with metal-rubber construction
- Vehicle-specific fit references for Chevrolet Malibu and Buick models
- Sold as a single direct-replacement unit for quick parts swap
- Low-cost aftermarket option compared with factory replacements
- Aftermarket part may have less consistent fitment and durability than factory-quality mounts
- Installation generally requires engine support and professional fitment for safety
Verdict: A cost-effective aftermarket engine mount that restores vibration control for Malibu and compatible Buick models at a budget price.
5. GM Genuine Parts 84034314 Engine Mount
| Manufacturer | ACDelco |
|---|---|
| Set Name | GM Genuine Parts |
| Item model number | 84034314 |
| OEM Part Number | 84034314 |
This GM Genuine Parts engine mount is a factory-replacement part engineered to bolt directly into compatible Chevrolet Malibu applications and hold the engine securely in place. It is tuned to match the vehicle so the mount interfaces cleanly with adjacent brackets and components, making installation straightforward for a shop or experienced DIYer. The product emphasizes factory-quality fit and durability, using steel interlocks where needed to support the engine mass and help maintain alignment after impacts or heavy use. In practice this means reduced vibration transmission to the cabin and consistent engine positioning under load. Because it is a direct replacement from a GM-branded line, you get the same design intent and service life as the factory component. The main limitation is that it is a single OE-style mount intended for specific Malibu fitments, so buyers must confirm exact model year and engine compatibility before ordering rather than expecting universal fit across other vehicles.
Best for: Reliability-focused buyers who prioritize factory-spec replacements and long-term durability for routine repairs on a Chevrolet Malibu.
Less Ideal for: Shoppers wanting a universal or performance-tuned aftermarket mount for non-standard engine swaps or modified suspensions should consider alternative options.
- Factory-quality design tuned for Chevrolet Malibu fitment
- Built to align and function with surrounding components for straightforward installation
- Steel interlock construction intended to secure the engine mass and resist failure in demanding conditions
- Sold as a single replacement mount so additional mounts may be needed depending on your vehicle repair
- Compatibility is specific to certain Malibu model years and engine variants so fit must be verified before purchase
Verdict: Choose this GM Genuine Parts engine mount when you want a factory-quality, Malibu-specific replacement that maintains original fit and durability.
6. Yllshengyu 4‑Piece Engine and Transmission Mount Kit for Chevrolet Malibu 2013–2015 L4 2.5L
| Vehicle fit | Chevrolet Malibu 2013–2015 L4 2.5L Automatic |
|---|---|
| Pieces included | 4.0 Count |
| Manufacturer | Yllshengyu |
| Replaces part numbers | A5502, A5711, A5501, A5719 and others |
This Yllshengyu kit provides the four mounts needed to replace the right motor mount and three transmission mounts on a Chevrolet Malibu with the L4 2.5L automatic. It is sold as a complete kit so you can address worn mounts in one service visit rather than sourcing parts individually. The listing states direct replacement coverage for the common factory part numbers, and the mounts are built to meet or exceed factory-spec performance for vibration damping and engine torque control. In practice that means a quieter, smoother idle and less drive-train movement after installation. Buyers report straightforward fitment and routine installation steps for the passenger and driver side mounts, though some tight fastener locations require basic hand tools and patience. Quality reports are mixed: many users find the parts perform like factory replacements for the price, while a minority have had shorter lifespan than expected. If you want a convenient, one-stop replacement to restore NVH and stability on a Malibu 2.5L, this kit covers the necessary positions, but expect variable longevity compared with higher-end aftermarket or dealer parts.
Best for: Buyers who prioritize convenience and want a single kit to quickly restore ride smoothness and drivetrain support on a Chevrolet Malibu 2013–2015 L4 2.5L without sourcing multiple parts.
Less Ideal for: Drivers seeking the longest-lasting, premium aftermarket mounts or warranty-backed dealer parts should consider higher-end options instead.
- Complete 4-piece kit covers both motor and transmission mounts so you can replace all worn points at once.
- Designed to match listed factory part numbers for direct fitment on Malibu 2013–2015 L4 2.5L automatics.
- Aimed at factory-spec performance to reduce engine vibration and improve cabin refinement.
- Many buyers report easy installation and immediate reduction in vibration after swap.
- Quality and durability appear inconsistent across users, with some reporting premature failure.
- May require careful access and basic tools for tight fasteners during installation.
Verdict: A convenient, complete replacement kit that restores NVH and drivetrain support on Malibu 2013–2015 2.5L cars, though durability can vary.
7. AutoBuffy Engine & Transmission Mount Set (4-piece) for 2007–2012 Chevy Malibu 3.6L
| Fitment | 2007–2012 Chevy Malibu/ Pontiac G6/ Saturn Aura 3.6L |
|---|---|
| Included parts | Rear AT Mount EM-4062, Front AT Mount EM-4061, Center AT Mount EM-3135, Front Engine Mount EM-3097 |
| Mounting type | Chassis Mount |
| Manufacturer | AUTO BUFFY |
This AutoBuffy kit supplies the four mounts needed to replace worn engine and transmission mounts on a 2007–2012 Chevy Malibu with the 3.6L V6. It is used to secure the engine and transmission, absorb vibration, and help maintain stable engine alignment for smoother driving and reduced noise. The set matches common factory replacement part references so installation is straightforward for a shop or an experienced DIYer and does not require extensive modification. The mounts are built with rubber bonded to metal plates to dampen vibration while providing necessary support. Practical benefits include a noticeable reduction in engine shake and improved cabin comfort after replacement and the convenience of receiving all required positions in one kit. Limitations to consider are that rubber mounts still wear over time and performance can vary part-to-part; one user reported softer rubber and excess movement. If precise OEM firmness or long-term heavy-duty durability is critical, a higher-end or performance-focused option may be preferable.
Best for: A risk-averse mainstream buyer seeking a direct replacement to restore smooth, quiet operation on a Chevy Malibu 3.6L without experimenting with performance upgrades.
Less Ideal for: Drivers wanting sportier, stiffer mounts for aggressive driving or those who prefer heavy-duty commercial-grade components should look at performance or upgraded mount options instead.
- Complete 4-piece kit covers front, center, and rear engine/transmission mounts so all worn contact points can be replaced at once.
- Designed to match common factory part references for straightforward fitment on compatible Malibu 3.6L applications.
- Rubber-to-metal construction reduces engine vibration and lowers cabin noise compared with badly worn mounts.
- Supplies parts that allow a single service visit to resolve multiple symptoms like vibration, engine movement, and drivetrain noise.
- Rubber compound may feel softer than original on some units, which can allow greater engine movement under load.
- Long-term durability may vary compared with higher-cost OEM or premium aftermarket mounts.
Verdict: A convenient, all-in-one replacement kit for restoring smoothness and reducing vibration in 2007–2012 Chevy Malibu 3.6L cars, with reasonable fitment and value for mainstream buyers.
Choosing the Right Chevrolet Malibu Engine Mount: Key Factors to Consider
Fitment and Compatibility
Accurate fitment is essential because engine mounts secure the engine to the chassis and align drivetrain components. A mount that does not match the vehicle's mounting points can cause misalignment, premature wear of adjacent components, and unsafe engine movement. When fitment is correct you avoid modifications, simplify installation, and maintain factory clearances.
Check mounting hole patterns, stud sizes, and orientation. Confirm the mount is specified for the Chevrolet Malibu model year and engine variant you have. Mounts that list vehicle-specific fitment reduce the risk of returns and installation delays.
Vibration Isolation
The primary job of an engine mount is to isolate engine vibrations from the cabin while still controlling movement. Mounts use rubber, hydraulic fluid chambers, or a combination to absorb vibrations. Stiffer mounts reduce engine movement but can transmit more vibration and harshness; softer mounts improve comfort but may allow excessive engine motion.
Consider your priorities: highway comfort and reduced cabin vibration favor mounts with effective damping properties, while performance-oriented drivers may accept firmer mounts for better engine control under load.
Torque Control and Load Capacity
Engine torque mounts resist rotational forces when the engine delivers power, limiting forward and backward tilt. Proper torque control prevents clunking during acceleration or sudden throttle changes and helps protect drive axles and exhaust connections. Load capacity matters because the mount must safely carry the engine weight and withstand dynamic loads during driving.
Look for mounts rated for the engine's expected forces and those that explicitly address torque control. Designs that incorporate reinforced brackets or dual-material construction often handle torque better than simple rubber blocks.
Durability and Materials
Materials and construction affect how long an engine mount lasts in service. High-quality rubber compounds, bonded metal plates, and corrosion-resistant hardware extend service life. Environmental exposure, heat from the engine, and chemical contact with oil or road fluids can degrade inferior materials quickly.
Choose mounts with durable elastomers and plated or stainless fasteners where possible. Warranty information and manufacturer material descriptions help indicate expected longevity.
Installation and Serviceability
Some engine mounts are straightforward bolt-on replacements, while others require engine support, alignment, or special tools. Ease of installation affects labor time and the chance of improper torqueing or misalignment. Clear instructions and included mounting hardware reduce complications during replacement.
If you plan DIY installation, pick mounts that match factory dimensions and come with hardware or clear torque specs. If shop installation is likely, consider parts that minimize vehicle disassembly to keep labor reasonable.
Noise, Vibration, and Harshness Tradeoffs
Different mount designs balance noise, vibration, and harshness differently. Hydraulic or fluid-filled mounts can be excellent at damping low-frequency vibrations, while solid or stiffer mounts may transmit more noise. Consider how much additional engine noise and vibration you can tolerate in exchange for improved engine control.
Evaluate how the mount's damping characteristics align with your driving style and comfort expectations to find the best compromise between refinement and performance.
How We Chose the Best Chevrolet Malibu Engine Mount
We focused on engine mounts that match Chevrolet Malibu factory fitment and mounting points, prioritizing parts designed for correct alignment and secure attachment. Key evaluation criteria included fitment accuracy to factory specs, the mount material and durometer for vibration isolation, load capacity and torque control (for managing engine movement under acceleration), and durability factors such as corrosion-resistant hardware and long-lasting rubber or bonded materials. We also considered ease of installation, including whether mounts require engine support or special tools, and manufacturer documentation for torque specs and installation guidance. Exclusions: We excluded any parts without clear vehicle-specific fitment information, mounts that require major vehicle modifications, and listings lacking basic installation guidance. The result is a focused set of options that suit typical replacement needs while emphasizing correct fit, vibration reduction, and long-term reliability.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common signs that my Chevrolet Malibu engine mount is failing?
Common signs include increased vibration at idle, clunking or banging during acceleration or deceleration, and visible engine movement when revving. You may also notice new noises from the engine bay or premature wear on connected components. Visual inspection can reveal cracked rubber or separated bonded layers, but symptoms often appear before severe visible damage.
Can I replace an engine mount myself or should a shop handle it?
Whether you can do it yourself depends on your tools and experience. Simple bolt-on mounts that do not require lifting the engine are often within the reach of a competent DIYer. However, many mounts need the engine supported or temporarily aligned, and incorrect torqueing can cause issues. If you are unsure, a professional installation reduces risk and ensures correct torque and alignment.
How does a torque mount differ from a regular engine mount?
A torque mount is designed specifically to resist rotational forces from the engine under acceleration, helping control tilt and reduce movement. Regular mounts primarily support the engine's weight and isolate vibration. Vehicles that experience pronounced engine rotation benefit from a mount with enhanced torque-control features to prevent clunking and protect drivetrain connections.
Will replacing the mount fix vibration and noise issues?
Replacing a worn or damaged mount often reduces vibration and noise, but results depend on the root cause. If mounts were the primary issue, a correct replacement that matches damping needs should noticeably improve comfort. If other factors like exhaust hangers, transmission mounts, or engine misalignment are contributing, those may also need attention.
How should I prepare my car before installing a new engine mount?
Park on level ground and gather required tools, including engine support or a jack with a wood block to protect the oil pan if needed. Review torque specifications and any alignment notes. Having new hardware on hand and cleaning mounting surfaces helps ensure a secure installation and correct seating of the new mount.
Conclusion
Choosing the right Chevrolet Malibu engine mount means balancing fitment, vibration control, torque management, and durability. Prioritize mounts that match factory mounting points, offer the damping characteristics you need, and include clear installation guidance. Expect tradeoffs between comfort and control: softer mounts reduce cabin vibration while stiffer or torque-focused designs limit engine motion. Use the factors above to decide which attributes matter most for your driving needs and installation plans.
Explore More:
- Check out all Chevrolet Malibu parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
