Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing the factory door speakers in your Scion xD can make a noticeable difference in clarity, imaging, and bass response during everyday drives. Choosing the right speakers matters because fitment, power handling, and sensitivity determine how a new set will perform with your existing head unit and amplifier. This guide highlights our shortlist of the top Scion xD door speakers across several use cases and notes the evaluation criteria we used, including physical fitment and electrical compatibility. Read on to find options that match your goals and installation approach.
Looking for other parts? See all Scion xD parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | BOSS Audio Systems CH6530B 6.5" 3-Way Coaxial Car Door Speakers (Pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | Pyle PL613BK 6.5" 3-Way Triaxial Car Speaker (Pair) |  |
| Best Quality Built to a higher standard if you want something more solid | DS18 PRO-X694BM 6×9 Midrange Loudspeaker with Red Aluminum Bullet |  |
| Best Budget The cheapest option that still gets the job done reliably | Sound Storm Laboratories EX365 6.5" 3-Way Car Door Speakers (Pair) |  |
| Most Sold A high-volume bestseller chosen again and again | DS18 PRO-GM6.4B 6.5" Midrange Loudspeaker (Single) |  |
| Best Value for Money The sweet spot between price and what you get | BOSS Audio Systems NX654 6.5" Onyx Series Car Door Speakers (Pair) |  |
| Best Overall The best all-around choice for most situations | Kenwood KFC-1666S 6.5" 2-Way Coaxial Car Door Speaker |  |
1. BOSS Audio Systems CH6530B 6.5" 3-Way Coaxial Car Door Speakers (Pair)
| Speaker Type | Coaxial 3-way |
|---|---|
| Speaker Size | 6.5 Inches |
| Impedance | 4 Ohms |
| Included Components | Speakers |
| Subwoofer Connectivity Technology | Wired |
The BOSS CH6530B is a straightforward 6.5-inch, 3-way coaxial speaker pair meant for replacing worn door speakers in everyday cars like the Scion xD. It combines a poly injection woofer, a 1-inch polyimide midrange and a 0.5-inch tweeter to broaden frequency coverage compared with basic two-way units, and the 4 ohm impedance makes it compatible with most factory head units. Typical use is direct swap into door locations where you want clearer mids and highs without adding an external amplifier. Practical benefits include easy installation, improved treble and mid clarity over blown stock speakers, and a lightweight design that fits common 6.5-inch openings. Limitations are expected for this price tier: bass depth will be limited compared with larger or powered systems, durability and long-term reliability can vary by unit, and some users report occasional failures if paired with poor wiring or high gain settings. For a reliability-focused replacement for a Scion xD, these deliver a clear and inexpensive step up from aged factory speakers if installed and wired correctly.
Best for: Reliability-focused buyers looking for a simple, low-cost factory-style replacement for Scion xD door speakers who prioritize consistent, plug-and-play upgrades over audiophile performance.
Less Ideal for: Enthusiasts seeking deep bass, high-power handling, or competition-level sound should consider component speakers with an external amplifier instead.
- Three-way coaxial design improves midrange and treble clarity compared with basic two-way door speakers
- Standard 4 ohm impedance works with factory head units without needing an amplifier
- Packaged as a pair for full-door replacement and straightforward wired hookup
- Lightweight construction and common 6.5-inch size simplify installation into typical door locations
- Bass extension is modest and will not match larger dedicated woofers or amplified systems
- Build quality is aligned with budget pricing so long-term durability can be inconsistent
Verdict A budget-friendly, plug-and-play 6.5" 3-way pair that upgrades clarity for a Scion xD but will not deliver deep bass or audiophile-grade longevity.
2. Pyle PL613BK 6.5" 3-Way Triaxial Car Speaker (Pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Power Handling | 150 Watts RMS / 300 Watts Max |
| Sensitivity | 89 dB |
| Configuration | 3-way triaxial |
These Pyle 6.5" 3-way triaxial speakers are a budget replacement designed to drop into standard 6.5-inch door openings and boost in-car clarity and volume compared with many factory units. Each speaker combines a 1" neodymium midrange, 3/4" piezo tweeter and a 5" woofer in a coaxial layout, with 150 W RMS (300 W peak) power handling and a reported 89 dB sensitivity. They include speaker grills, wiring and mounting hardware to speed a plug-and-play swap into Scion xD front or rear door locations that accept 6.5" speakers. In practice these deliver louder, more defined mids and highs and are easy to install for owners who want a quick convenience-oriented upgrade without custom work. Limitations are the modest sensitivity and piezo tweeters, which give clear treble but limited low-end punch compared with dedicated component sets or higher-end coaxials, and longevity can vary under heavy amplification. Expect a strong budget upgrade for daily listening rather than audiophile-grade performance.
Best for: Convenience-driven buyers who want a fast, affordable upgrade to the Scion xD door speakers with minimal installation hassle and noticeably clearer sound than stock.
Less Ideal for: Audiophiles or owners seeking strong bass impact and studio-grade fidelity should consider component speakers or higher-end coaxials instead.
- Designed for standard 6.5" door openings for easy, no-mod install in Scion xD doors.
- Includes grills, wiring and mounting hardware for a quicker, convenience-focused swap.
- Three-way triaxial design separates tweeter and midrange for clearer highs and mid frequencies.
- 150 W RMS (300 W peak) rating offers headroom for louder playback with an aftermarket amp.
- Piezo tweeters and basic materials limit deep bass extension and refined high-frequency detail compared with premium speakers.
- Modest sensitivity means stock head units may not reach full potential without added amplification.
- Build and long-term durability can be inconsistent under heavy use or high power levels.
Verdict A convenient, low-cost way to noticeably improve Scion xD door sound quality, but not a substitute for higher-end component speakers.
3. DS18 PRO-X694BM 6×9 Midrange Loudspeaker with Red Aluminum Bullet
| Impedance | 4 Ohms |
|---|---|
| Speaker Type | Component |
| Signal-to-Noise Ratio | 96 dB |
| Audio Driver Type | Dynamic Driver |
| Specific Uses For Product | Car, Truck, and Motorcycle Stereo Sound System |
The DS18 PRO-X694BM is a 6×9 midrange loudspeaker built to add authoritative midrange presence to a car audio system. Intended for door mounting, it is a wired dynamic driver with a ferrite magnet and a 1.5" high-temperature CCAW voice coil that helps it tolerate sustained power. In use this speaker is best paired with an aftermarket amp and a dedicated subwoofer because it pushes a lot of midrange and can overwhelm a stock system if driven from a factory head unit. Notable features include a claimed 275W RMS (550W peak) power handling, high sensitivity in the upper 90s dB, and a non-pressed paper cone in a reinforced basket for clear vocals and instrument separation. Practical benefits are loud, articulate midrange at high volume and a robust voice coil that resists thermal damage during heavy use. Limitations are its focus on midrange rather than deep bass, meaning you will need a proper subwoofer for full-range sound, and the speaker's aggressive output may require an external amp and careful tuning to avoid distortion in small cabin installs like the Scion xD door space.
Best for: Performance-oriented owners who prioritize loud, detailed midrange and plan to pair door speakers with an aftermarket amplifier and subwoofer for a high-SPL Scion xD audio build.
Less Ideal for: Casual listeners who want balanced, full-range sound from a single factory replacement speaker without adding an amp or subwoofer should consider a different, more full-range door speaker.
- High power handling (275W RMS / 550W peak) for loud, clean midrange when paired with an amp
- High-temperature 1.5" CCAW voice coil improves durability under heavy use
- High sensitivity near 98 dB yields strong output without extreme amplifier demands
- Ferrite magnet and reinforced basket provide solid transient response and vocal clarity
- Designed as a midrange driver so it lacks deep bass extension and needs a subwoofer for full-range sound
- May be overpowering on factory stereo outputs and generally requires an aftermarket amplifier for best results
Verdict A robust, high-output 6×9 midrange built for performance Scion xD door installs, but you will need an amp and a subwoofer to achieve full-range sound.
4. Sound Storm Laboratories EX365 6.5" 3-Way Car Door Speakers (Pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Frequency Response | 85Hz – 18KHz |
| Sensitivity | 88 dB @ 1 W/1 m |
| Configuration | 3-way coaxial |
The Sound Storm Laboratories EX365 are budget 6.5-inch 3-way coaxial speakers intended as a drop-in replacement for factory door speakers in cars like the Scion xD. They deliver full-range sound from a polypropylene woofer with a Mylar mid and dome tweeter, a stamped basket and rubber surround for basic durability. With a sensitivity around 88 dB and 4 ohm impedance they will play acceptably from a stock head unit and can handle short bursts of higher power, though they benefit from a modest external amp for cleaner loud playback. Practical strengths are ease of installation into standard 6.5" door locations and weather-resistant rubber surrounds that hold up to everyday conditions. Limitations are modest sensitivity and bass extension, so they will not produce deep low end without an amplifier or a subwoofer, and longer-term reliability has mixed reports among users. For a cost-conscious Scion xD owner needing an inexpensive door speaker replacement, these hit the basics but are not aimed at audiophile performance.
Best for: A budget-conscious buyer replacing worn factory door speakers on a Scion xD who prioritizes low cost and straightforward, no-mod installation over high-end sound.
Less Ideal for: Audiophiles or drivers who want strong bass from door speakers alone or plan to run high-power amplifiers should look at higher-end, more robust speaker options instead.
- Designed to fit standard 6.5-inch door speaker openings for straightforward replacement in the Scion xD
- Polypropylene cone and rubber surround provide reasonable durability and weather resistance for door use
- 3-way coaxial design (woofer, midrange, tweeter) gives clearer highs and vocal presence than single-cone replacements
- Works acceptably on a factory head unit so no mandatory amplifier is required for everyday listening
- Limited bass extension and modest sensitivity mean thin low end unless paired with an amp or subwoofer
- Reported long-term reliability is inconsistent across users
- Not tuned for high-power audiophile setups and may distort if driven hard without proper amplification
Verdict A very affordable, easy-to-install 6.5" door speaker for Scion xD owners who want a quick sound upgrade on a tight budget, but do not expect deep bass or pro-level durability.
5. DS18 PRO-GM6.4B 6.5" Midrange Loudspeaker (Single)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| RMS Power | 140W |
| Peak Power | 480W |
| Frequency Response | 160 Hz – 10 kHz |
The DS18 PRO-GM6.4B is a single 6.5-inch midrange driver designed to replace or upgrade factory door speakers in vehicles like the Scion xD. It covers a broad midrange band (about 160 Hz to 10 kHz) so vocals and instruments come through with improved clarity compared with typical stock speakers. The speaker uses a ferrite magnet, a 1.5-inch Kapton voice coil for heat resistance, and a bullet-style dust cap intended to protect the coil and shape the midrange dispersion. With a 140W RMS rating at 4 ohms and 94 dB sensitivity, it can play loudly when paired with a modest external amplifier and will often outpace a factory head unit alone. Installation is standard for a 6.5-inch door cutout but note the listed mounting depth and cut-out dimensions need checking against Scion xD door space before purchase. Some users report excellent durability and clarity while a minority note lifespan issues when driven hard, so pairing this speaker with appropriate power handling and proper installation will give the most reliable results.
Best for: Risk-averse mainstream buyers seeking a reliable step-up from factory door speakers who prioritize clear, durable midrange performance without chasing exotic audiophile hardware.
Less Ideal for: Drivers wanting a full component set with separate tweeters or those who need a plug-and-play replacement with guaranteed perfect fit in nonstandard door cavities should consider other options.
- Covers a wide midrange (160 Hz–10 kHz) for clearer vocals and instruments
- High thermal tolerance Kapton 1.5" voice coil for longer life under load
- 140W RMS power handling suitable for amplifier-driven door systems
- 94 dB sensitivity makes it relatively efficient and loud with modest power
- Mounting depth and cut-out size are nonstandard and require verification for Scion xD door pockets
- Sold as a single speaker so buyers must purchase pairs for full-door replacement
Verdict A loud, vocal-forward 6.5" midrange speaker that upgrades Scion xD door sound when properly fitted and amp-matched, provided you buy a matching pair.
6. BOSS Audio Systems NX654 6.5" Onyx Series Car Door Speakers (Pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Maximum Output Power | 400 Watts |
| Frequency Response | 45 Hz |
The BOSS NX654 is a 6.5-inch, four-way coaxial speaker pair designed to replace factory door speakers and deliver louder, fuller sound without an amp. In practice these fitment-friendly speakers are mounted in door locations and driven from a stock or entry-level head unit; many buyers report noticeably more bass and midrange presence than stock Scion xD speakers. Notable features include a full-range 4-way design with multiple tweeter sizes and a rubber surround that helps durability. The practical benefits are clear: they increase loudness and perceived bass on a budget and are simple to swap into common door mounting points. Limitations to expect are uneven long-term reliability reported by some users when driven hard, and a spec sheet listing only maximum power rather than continuous RMS, so pairing with a high-power aftermarket amp risks damage. Also they are not water resistant and may require trim or minor modification to clear magnet protrusion in some door pockets. For Scion xD owners seeking an affordable, noticeable step up from factory speakers these deliver strong value, but don’t expect audiophile clarity or pro-level durability under heavy power.
Best for: Practical optimizers who want the biggest sound improvement for the least money and prefer a straightforward door-swap upgrade for their Scion xD without investing in amps or custom enclosures.
Less Ideal for: Audiophiles or installers planning to run high-power aftermarket amplifiers should look at higher-end, better-specified component speakers and dedicated subwoofers instead.
- Affordable upgrade that noticeably increases volume and bass compared with many factory door speakers
- 4-way coaxial design provides extended high-frequency detail with multiple tweeters
- Rubber surround and stamped basket give practical durability for standard in-car use
- Sold as a pair and intended for direct door replacement to simplify installation
- Maximum power rating provided but continuous RMS is not specified, making amplifier matching uncertain
- Not water resistant so exposure in door cavities or open windows may shorten life
- Some users report failures when pushed with high-power amplification
Verdict A cost-effective door-speaker replacement that gives a clear volume and bass boost for Scion xD owners but is best kept on modest power to avoid reliability issues.
7. Kenwood KFC-1666S 6.5" 2-Way Coaxial Car Door Speaker
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Frequency Response | 40 – 22000 Hz |
| Sensitivity | 90 dB |
| Tweeter Diameter | 1 Inches |
The Kenwood KFC-1666S is a 6.5-inch two-way coaxial door speaker designed to be a straightforward upgrade for factory audio systems. It pairs a polypropylene woofer with a 1-inch balanced dome tweeter and a ferrite magnet motor structure to provide clear vocals and crisp highs across a wide frequency range. Typical use is as a direct replacement for Scion xD front or rear door speakers where a modest power handling and easy, top-mount installation are priorities. Notable features include a shallow top-mount depth for tight door cavities, a 4 ohm impedance that works with most factory head units, and 60 watts RMS capability per pair for louder, cleaner sound than many stock speakers. In practice it improves clarity and detail at medium volumes and remains stable without extra amplification for casual listening. Limitations are modest bass extension compared with larger or component systems and potential fitment adjustments on some door mounting patterns, so minor trimming or adapter plates may be needed. For a balanced buyer it is a dependable, no-fuss way to noticeably improve a Scion xD’s factory soundstage without complex installation.
Best for: A balanced all-round buyer who wants a reliable, straightforward sound upgrade for a Scion xD without adding amplifiers or heavy modification; ideal for drivers who prioritize clearer vocals and highs for daily listening.
Less Ideal for: Not suitable for listeners seeking deep, punchy bass or for builds that aim for high-power, competition-level audio where component speakers and external amplification are required.
- Balanced two-way design improves midrange and treble clarity over stock speakers
- Shallow top-mount depth suits tight door cavities common in compact cars
- 4 ohm impedance and 60W RMS per pair work well with factory head units without an amp
- Polypropylene cone and treated cloth surround resist common door-environment wear
- Limited low-frequency/bass output compared with larger speakers or powered subwoofers
- May require minor mounting adjustments or adapter plates to match some Scion xD door screw patterns
Verdict A practical, easy-to-install 6.5" coaxial that noticeably sharpens mids and highs in a Scion xD without requiring extra power, but it will not deliver deep bass.
Choosing the Right Scion xD Door Speakers: Key Factors to Consider
Fitment and Mounting Depth
Correct physical fit is the first constraint when choosing door speakers. The speaker diameter, mounting bolt pattern, and required depth must match the Scion xD door openings or be manageable with standard adapters or spacers.
If a speaker sits too deep it can contact window mechanisms or require door panel modification. If it is too shallow you may need a spacer to protect the cone and ensure proper airflow. Checking mounting flange shape and grille clearance prevents vibration and rattle after installation.
Power Handling and Sensitivity
Power handling indicates how much amplifier power a speaker can accept without damage, while sensitivity reflects how loudly it plays from a given input level. For cars with stock radios, higher sensitivity can yield better volume and clarity without a separate amplifier.
If you plan to add an amplifier, choose speakers with higher continuous power ratings and stable impedance to handle the extra power. Matching speaker sensitivity and power capability with your head unit or amp reduces distortion and improves dynamic range.
Speaker Type: Coaxial Versus Component
Coaxial speakers combine tweeter and woofer in one assembly for a compact, easier-to-install solution. They simplify door speaker replacement and often work well in constrained door spaces.
Component speakers separate the tweeter and woofer, allowing for tailored placement and better imaging when installation space and complexity are acceptable. Components typically require external crossovers and more installation work but can provide improved clarity and staging in a well-executed setup.
Frequency Response and Tonal Balance
Look at the stated frequency range and how a speaker handles lows, mids, and highs. A broader, flatter response usually translates to more accurate reproduction across music genres, while pronounced low-end emphasis can help drivers who want stronger bass from door-mounted speakers.
Keep in mind that doors are not ideal low-frequency enclosures, so bass extension will depend on cone design and power. Consider how the speaker's tonal bias will fit with existing components to avoid a boxy or overly bright cabin sound.
Build Quality and Materials
Durable cone materials, quality surrounds, and robust tweeter designs extend a speaker's usable life in the temperature and humidity conditions inside a car door. Materials like treated paper, polypropylene, or mineral-filled cones each offer tradeoffs in weight, damping, and tonal character.
Check the quality of the mounting frame and the robustness of the terminals. Corrosion-resistant hardware and weather-resistant components help maintain consistent performance over time, especially in doors where moisture and temperature swings occur.
Installation and Wiring Considerations
Installation ease affects overall cost and the likelihood of a clean result. Speakers that match factory wiring harnesses or use common adapters reduce labor and wiring errors. Also consider whether the speaker requires external crossovers, tapping points for tweeters, or additional brackets.
Plan for sound-deadening or gasket material to reduce door panel vibrations and improve bass response. Clear instructions and available mounting accessories make the project smoother for DIY installers and reduce the risk of incorrect connections.
FAQ
Will aftermarket door speakers fit my Scion xD without modification?
Many aftermarket door speakers are available in common sizes that match the Scion xD mounting patterns, but fit depends on depth and flange shape. Check mounting depth and bolt pattern before purchasing. In some cases simple adapters or spacers are needed, while others may require minor trimming of the inner door plastic for clearance.
Do I need an amplifier when upgrading Scion xD door speakers?
An amplifier is not always required. If your new speakers have higher sensitivity and match your head unit's power output, you can get improved sound without adding an amp. However, to realize the full potential of lower-sensitivity or higher-power speakers, a dedicated amplifier will provide cleaner headroom and better dynamic performance.
Are component door speakers worth the extra installation effort?
Component speakers often deliver better imaging and clearer high-frequency detail because the tweeter can be placed separately from the woofer. They usually require more installation work and possibly external crossovers, so they are worth it if you prioritize sound staging and have the space and budget for proper installation.
How important is speaker sensitivity for daily driving in a Scion xD?
Sensitivity matters because it affects how loudly a speaker will play with a given head unit. In a cabin the size of the Scion xD, moderately high sensitivity helps achieve clear listening levels without pushing the radio to distortion. Sensitivity should be balanced with power handling to avoid overdriving the speaker.
Can I replace door speakers myself or should I hire a pro?
Many owners can replace door speakers with basic tools and patience, especially when speakers match factory cutouts and wiring. If the job requires custom brackets, wiring harness modifications, or tuning an amplifier, professional installation reduces risk and ensures correct integration.
How We Chose the Best Scion xD Door Speakers
We focused on speakers that match the Scion xD door openings and mounting depth while delivering reliable electrical compatibility with common factory and aftermarket head units. Key evaluation criteria included physical fit and mounting options, power handling and sensitivity, frequency response and tonal balance, build quality and cone materials, and ease of installation including grille and adapter availability. We also considered how well speakers integrate with typical door acoustics and whether they support common upgrades such as external crossovers or amplification. Products that required extensive vehicle modification, custom fabrication, or incompatible wiring were excluded. Our filters prioritized options that offer clear, reliable performance in real-world driving conditions and that are practical for owners seeking an upgrade without major door modifications.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing Scion xD door speakers, prioritize physical fit and how the speaker's power handling and sensitivity match your existing audio source. Balance the desired tonal characteristics with practical installation limits inside the door. Decide whether ease of installation or maximum sound quality is more important, and plan for wiring, mounting hardware, and minor door work if necessary. Thoughtful selection and correct installation will deliver the clearest, most satisfying in-car sound for your driving needs.
Explore More:
- Check out all Scion xD parts & accessories
- Explore Electronics
- Browse all Accessories
