Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Upgrading the factory speakers in your Scion xD can make a noticeable difference to daily drives, from clearer vocals to tighter bass response. Choosing the right 6×8 option matters because these speakers must fit the vehicle�s mounting points and deliver the sound profile you want without extra modification. This guide covers the top shortlisted 6×8 speakers for the Scion xD, each selected for fit and performance across real-world listening scenarios. Below we explain the evaluation criteria and what to expect when swapping the door speakers.
Looking for other parts? See all Scion xD parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Infinity Kappa KAPPA-86CFX 6×8 2-Way Coaxial Car Speakers |  |
| Most Popular A crowd favorite that many people choose with confidence | Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs) |  |
| Best Quality Built to a higher standard if you want something more solid | Rockford Fosgate P1683 6×8 3-Way Car Speakers (pair) |  |
| Best Budget The cheapest option that still gets the job done reliably | Orion Cobalt Series CB683 6×8" 3-Way Coaxial Car Speakers (Pair) |  |
| Most Sold A high-volume bestseller chosen again and again | UTV Stereo Kicker DS-Series 6×8 Coaxial Speaker Upgrade Kit (4-Pack) |  |
| Best Value for Money The sweet spot between price and what you get | JBL GX8628 6×8" 2-Way Coaxial Car Speakers (Pair) |  |
| Best Overall The best all-around choice for most situations | KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Kit with Harness for Ford F-150 (4-pack) |  |
1. Infinity Kappa KAPPA-86CFX 6×8 2-Way Coaxial Car Speakers
| Speaker Maximum Output Power | 120 Watts |
|---|---|
| Impedance | 2.5 Ohms |
| Speaker Size | 8 Inches |
| Audio Output Mode | Stereo |
The Infinity Kappa KAPPA-86CFX are 6×8 two-way coaxial speakers built for replacing factory door speakers and improving in-car sound. They use glass-fiber woofer cones and edge-driven textile dome tweeters to produce tighter bass and smooth high frequencies, and the low-impedance 2.5 ohm design lets them draw more power from an aftermarket head unit or amp. In practice these speakers are typically used as front-door upgrades in compact cars like the Scion xD; installers report easy fit with minor trimming to factory mounting rings and improved clarity across volume levels. Notable features include patented Plus One woofer geometry for increased cone area, high output 120 watt peak power handling, and tweeters that can be angled for better staging. The practical benefits are cleaner mids and highs, better transient response, and much more authoritative bass when driven by an amp. Limitations are that they will underperform on bass from a head unit alone and benefit from added amplification, and their low impedance may demand a compatible amplifier to avoid overheating or overloading weaker factory amplifiers.
Best for: Reliability-focused buyers who prioritize a durable, well-built speaker upgrade that produces clear, consistent sound in everyday driving and expects improved long-term performance over stock speakers.
Less Ideal for: Buyers seeking deep, subwoofer-level bass from door speakers alone or those who cannot add an external amplifier should consider other solutions.
- Glass-fiber woofer cones increase cone area for stronger low-frequency output compared with typical stock speakers
- Edge-driven textile dome tweeters deliver smooth, extended high frequencies and tilt for better imaging
- High-output 2.5 ohm architecture and 120 W peak handling for louder, more dynamic performance when properly powered
- Designed as a direct aftermarket replacement for car doors with reports of straightforward installation and improved clarity over stock units
- Requires additional amplifier power to reach full potential; head-unit-only setups may sound weak in bass
- Low 2.5 ohm impedance can strain some factory amplifiers if driven hard without a proper amp
Verdict A sturdy, high-output 6×8 upgrade that delivers cleaner mids and highs for the Scion xD but performs best when paired with an amplifier.
2. Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92 dB |
| Frequency Response | 28 – 22,000 Hz |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws |
The Alphasonik AS268P ships as two pairs of 6×8-inch 3-way coaxial speakers intended to replace factory door speakers in a compact car like the Scion xD. Install is straightforward for a convenience-focused upgrade: the kit includes screws and pigtail leads so you can swap speakers with minimal wiring or use inexpensive adapters to plug into the factory harness. The speakers feature a dynamic driver arrangement with a dedicated tweeter and mid/woofer to extend frequency response down to about 28 Hz and up to 22 kHz, and a sensitivity around 92 dB which helps them play louder from a stock head unit. Practical benefits include noticeably clearer vocals and fuller sound than many stock speakers, and the shallow mounting depth helps in tight door cavities. Limitations: rated RMS power is modest at 35 W per speaker so low-end impact is limited without adding a subwoofer or amp, and build and long-term durability are typical of budget speakers rather than premium components. If you want a quick, low-effort sound bump for a Scion xD they do the job, but they are not a high-end audiophile solution.
Best for: Convenience-driven buyers who want an easy, budget-friendly sound upgrade for their Scion xD with minimal wiring and quick installation.
Less Ideal for: Audiophiles or users seeking strong low-frequency output without adding a powered subwoofer or external amplifier should consider higher-end or amplified options instead.
- Includes two pairs plus mounting screws and pigtail leads for a near plug-and-play swap into the factory locations
- Shallow mounting depth suited to tight door cavities common on the Scion xD
- 92 dB sensitivity makes them play louder from a stock head unit without an amp
- 3-way design with a separate tweeter improves vocal clarity and high-frequency detail
- Modest RMS power (35 W per speaker) limits bass output unless paired with a sub or amplifier
- Not rated as water resistant so exposure to moisture in door shells could shorten lifespan
Verdict A budget-friendly, easy-to-install 6×8 speaker kit that noticeably improves clarity over factory units in a Scion xD but will benefit from a sub or amp for deeper bass.
3. Rockford Fosgate P1683 6×8 3-Way Car Speakers (pair)
| Speaker Type | Coaxial |
|---|---|
| Number of Audio Channels | 3.0 |
| Speaker Maximum Output Power | 130 Watts |
| Speaker Size | 6 Inches |
The P1683 is a 6×8 three-way coaxial speaker designed to replace factory drivers and deliver clearer, more dynamic sound than typical stock speakers. It is commonly used in-door or rear deck installs where a direct fit is available in the vehicle; for the Scion xD this size is a common upgrade for crisper mids, tighter bass, and improved vocal detail. Notable features include an integrated high-pass crossover for cleaner highs and a three-way design that separates low, mid and high frequencies for better clarity at moderate power levels. In real-world use the P1683 benefits from an added amplifier to reach its best performance and from a short break-in period; users report louder, punchier output and good bass extension for the size. Limitations are that these are not water resistant and will eventually distort if pushed beyond their power limits without proper amplification, and some installations require minor adjustments to mounting locations or hardware to sit flush. Expect clear, performance-focused improvement over factory speakers when paired with appropriate crossover settings or an amp.
Best for: Performance-oriented buyers who prioritize clearer mids, tighter bass, and vocal detail over stock audio and are willing to tune crossovers or add amplification to get the best sound.
Less Ideal for: Buyers seeking all-weather or marine-capable speakers or those who want a strictly plug-and-play improvement without any mounting modification or additional amplification.
- Three-way coaxial design separates frequencies for clearer highs and mids.
- Integrated high-pass crossover simplifies setup and protects tweeter at low frequencies.
- Higher power handling (130W peak, 65W RMS) supports louder, cleaner output when driven properly.
- Not water resistant so unsuitable for exposed outdoor or marine applications.
- May require minor modification or different mounting hardware to fit some factory openings.
- Performance benefits are limited without an external amplifier.
Verdict A performance-minded 6×8 replacement that delivers clearer, punchier sound than factory speakers when paired with proper mounting and amplification.
4. Orion Cobalt Series CB683 6×8" 3-Way Coaxial Car Speakers (Pair)
| Power handling (peak) | 280W |
|---|---|
| Power handling (RMS) | 70W |
| Impedance | 4 Ohms |
| Frequency response | 75Hz-20kHz |
| Sensitivity | 87.5 dB |
The Orion CB683 is a budget-friendly 3-way coaxial speaker pair built to replace factory 6×8 speakers and give the Scion xD noticeably fuller sound. Each speaker combines a polypropylene cone, butyl rubber surround and dedicated tweeter and mid-range to extend clarity through highs and mids while the woofer handles low end. Installation is straightforward for DIYers and the speakers accept 12V car systems and a standard 4-ohm load, so they plug into most Scion xD door or rear locations without needing extra adapters in many cases. Soundwise they deliver stronger bass and clearer vocals than most stock xD speakers, and customers note they play well with a modest head unit or small amp. Limits include a relatively high frequency cutoff at 75Hz compared with dedicated woofers, so very deep bass will still need a subwoofer, and build quality reflects the price point so extreme SPL or heavy power beyond the RMS rating can shorten lifespan. If you want a cost-effective way to lift your xD's sound without adding amps or major mods, these are a solid value.
Best for: Budget-conscious buyers who want a straightforward, no-frills upgrade to their Scion xD's factory 6×8 speakers to improve clarity and bass without adding amplifiers or complex modifications.
Less Ideal for: Audiophiles chasing deep sub-bass or long-term high-power reliability should consider component speakers with a matched amplifier and a dedicated sub instead.
- True 3-way design (woofer, mid, tweeter) for better midrange and treble clarity than typical coaxials
- Polypropylene cone with butyl rubber surround offers decent durability and controlled cone motion
- Compatible with 12V, 4-ohm car systems so they work with standard Scion xD wiring
- Easy DIY installation with universal bracket mounting for bolt-in replacement in many vehicles
- Bass response starts around 75Hz so they cannot reproduce very deep bass without a subwoofer
- Construction is budget-oriented so longevity under continuous high-power use may be limited
Verdict A wallet-friendly 3-way 6×8 upgrade that noticeably improves mids and highs in a Scion xD but still needs a sub for deep bass.
5. UTV Stereo Kicker DS-Series 6×8 Coaxial Speaker Upgrade Kit (4-Pack)
| Speaker Maximum Output Power | 200 Watts |
|---|---|
| Speaker Type | Coaxial |
| Enclosure Material | Polypropylene, Acoustic-Foam |
| Audio Driver Size | 6 Inches |
This UTV Stereo speaker bundle provides a straightforward factory-replacement style upgrade using 6×8 DS-Series coaxial drivers and vehicle-specific harnesses. It is intended to replace stock door speakers and includes two pairs of speakers plus matching plug-and-play harnesses so installation requires minimal modification. The speakers use polypropylene cones, ribbed acoustic-foam surrounds, and a 1/2" dome tweeter for improved clarity across the mid and high range; the listing states 50 watts RMS and 200 watts peak per pair with a 90 dB sensitivity and 4 ohm impedance. Practical benefits include cleaner, crisper vocal and instrument detail compared with many factory units and an easy install path because the harnesses plug into the factory connectors. Limitations to consider are modest bass output for listeners who want deep low-end and the need to confirm the harness plug included matches the Scion xD door connector before starting work, since one reviewer reported a missing adapter pin in some packages. For a risk-averse buyer looking for a direct-swap sound improvement, this kit simplifies the upgrade while leaving heavy bass demands and subwoofer needs to separate upgrades.
Best for: A risk-averse mainstream buyer who wants a reliable, easy-to-install speaker replacement that improves clarity over factory units without complicated modifications.
Less Ideal for: Audiophiles or bass-focused listeners who expect deep low-frequency extension from door speakers alone should consider a component set plus a subwoofer instead.
- Includes two pairs of 6×8 coaxial speakers plus matching harnesses for plug-and-play replacement
- Polypropylene cones and acoustic-foam surrounds deliver clear midrange and consistent high-frequency response
- Rated 50W RMS (200W peak) with 90 dB sensitivity for good output from factory head units
- Low-profile tweeter design reduces interference with door panels during installation
- Not designed to provide deep bass; users seeking strong low-end will need a separate subwoofer upgrade
- One reported packaging issue where the vehicle-side plug or pin was missing in some units, so inspect contents before installation
Verdict A plug-and-play 6×8 speaker bundle that reliably improves clarity over stock speakers but will not replace the low-frequency performance of a dedicated subwoofer.
6. JBL GX8628 6×8" 2-Way Coaxial Car Speakers (Pair)
| Speaker Type | Coaxial |
|---|---|
| Frequency Response | 50Hz – 21kHz |
| Power Handling (per speaker) | 180W peak / 60W RMS |
| Sensitivity | 92dB @ 2.83V |
The JBL GX8628 are 6×8-inch 2-way coaxial speakers intended as a direct upgrade over factory units in vehicles that accept that size, such as the Scion xD. They combine a Plus One polypropylene woofer cone and an edge-driven soft dome tweeter to deliver clear highs up to 21 kHz and stronger midbass than typical stock speakers. Rated for 180 watts peak (60 watts continuous per speaker), they handle additional head unit power well and respond positively when paired with an external amplifier. Installation is generally straightforward in standard 6×8 openings, and the speakers are voiced individually for balanced sound across left and right positions. Expect punchy, controlled bass without exaggerated boom and improved vocal clarity. Limitations include modest continuous RMS power compared with higher-end component options and a lower nominal impedance that may draw more current from weak factory amplifiers, so very high volume without an amp can strain some factory systems. These are a practical, budget-conscious upgrade that delivers noticeable sonic improvement for everyday listening in the Scion xD.
Best for: Practical optimizers looking to get the most audible improvement for their money on a Scion xD without complex upgrades, prioritizing reliable, balanced sound and straightforward installation.
Less Ideal for: Audiophiles seeking top-tier component systems or owners planning very high-power setups without adding an external amplifier should consider more advanced options.
- Plus One polypropylene woofer cone for stronger midbass compared with many stock speakers
- Edge-driven soft dome tweeter and frequency response up to 21 kHz for clear highs
- 180W peak / 60W continuous power handling makes them compatible with factory and modest aftermarket head units
- Individually voiced speakers to provide balanced left/right soundstage
- Lower continuous RMS than higher-end component speakers limits headroom for very loud, heavily amplified systems
- Nominal impedance around 2.3 ohms may draw more current from weak factory amplifiers
Verdict A cost-effective 6×8 speaker upgrade for the Scion xD that delivers clearer highs and punchier midbass without requiring major system changes.
7. KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Kit with Harness for Ford F-150 (4-pack)
| Impedance | 4 Ohms |
|---|---|
| Sensitivity | 90 dB |
| Frequency Response | 45-20,000 Hz |
| Peak Power | 200 watts |
| RMS Power | 50 watts |
These KICKER 6×8 DS Series speakers are a ready-to-install coaxial upgrade packaged with harnesses to simplify swapping into factory speaker locations. In everyday use they reproduce full-range audio with a 2-way design that combines a polypropylene woofer and a 1/2" dome tweeter, giving clearer highs and stronger mid-bass than typical stock speakers. The kit includes harnesses so installation is usually plug-and-play with no cutting required, which speeds up a door-speaker replacement. Practical benefits include 50 watts RMS handling per speaker pair, 200 watts peak power, 90 dB sensitivity and a wide 45–20,000 Hz frequency response that helps voice clarity and music detail on factory head units. Limitations: these are coaxial replacements meant for factory-style systems, not high-power aftermarket setups, so they will not match the performance of component speakers or powered systems with amps and subs. Also the bundle was designed around specific vehicle harnesses and may require verification for fitment and polarity before final installation.
Best for: Balanced buyers who want a straightforward factory-style speaker upgrade that improves clarity and loudness without complex electronics or installation.
Less Ideal for: Audiophiles or those planning to drive a high-power aftermarket system with external amplifiers and dedicated component speakers should look for higher-end component options instead.
- Includes vehicle-specific harnesses for quick plug-and-play installation without cutting
- 2-way coaxial design with dome tweeter provides clearer highs and improved midrange over typical factory speakers
- Reasonable power handling (50W RMS per pair) and 90 dB sensitivity make them loud enough on stock stereos
- Polypropylene cone and ribbed surround for durable, consistent performance
- Not intended for high-power aftermarket systems with external amplifiers and subs
- Some users report wiring polarity differences that require checking during installation
Verdict A practical, easy-to-install 6×8 coaxial upgrade that brings clearer highs and fuller mid-bass for drivers seeking a balanced, no-fuss audio improvement.
Choosing the Right Scion xD 6X8 Speakers: Key Factors to Consider
Fit and Mounting Depth
Confirming physical fit is essential because the Scion xD has limited door cavity space and fixed mounting points. Mounting depth and frame shape determine whether a speaker can be installed without cutting or relocating components. A unit that matches standard 6×8 dimensions will usually drop into place, while deeper magnet assemblies may require a spacer or bracket.
Neglecting fit can lead to poor seal against the door panel, compromised bass response, or interference with window mechanisms. When evaluating options, check clearance to the inner door skin and whether the speaker includes adapter plates or requires simple hardware changes to sit flush.
Power Handling and Sensitivity
Power handling indicates how much amplifier power the speaker can safely accept, while sensitivity shows how efficiently it converts power into volume. Matching these specs to your head unit or amplifier ensures the speaker will play loud enough without distortion and without risk of damage from underpowered or overpowered sources.
Higher sensitivity helps achieve greater volume from a factory head unit, and higher RMS power handling gives headroom for dynamic peaks. Consider both numbers together rather than one in isolation to predict real-world performance in the Scion xD cabin.
Speaker Type: Coaxial Vs Component
Coaxial speakers integrate a tweeter into the same mounting frame as the woofer, making them compact and straightforward to install in the Scion xD doors. Component systems separate tweeters and crossovers, offering improved imaging and cleaner high frequencies, but they often need additional mounting locations and wiring effort.
Your choice depends on priorities: choose coaxial for simpler installs and solid single-location upgrades, or pick components if you want a staged upgrade plan with dedicated tweeter placement and better stereo imaging.
Frequency Response and Sound Character
Frequency response shows the range of tones a speaker can reproduce and hints at its tonal balance. For in-car listening, a speaker with a controlled midrange and reasonable low-end extension improves clarity for voices and most music genres. Look for options that do not over-emphasize extremes, which can sound harsh or muddy inside the Scion xD's small cabin.
Consider whether you want a warmer tone for bass-focused music or a neutral profile for clarity. Frequency response graphs and user impressions can help, but real-world cabin acoustics will shape the final sound.
Durability and Materials
Door speakers face humidity, temperature swings, and vibration, so cone materials, surround type, and basket construction matter for long-term performance. Treated paper, polypropylene, or composite cones each offer tradeoffs between weight, damping, and longevity, while rubber surrounds usually outlast foam in automotive conditions.
Choose speakers with corrosion-resistant hardware and robust tweeter mounts to avoid degradation over time. A solid warranty and good manufacturer support also indicate better long-term reliability for everyday use.
Installation Ease and Wiring
Installation complexity can range from simple plug-and-play swaps to runs that require new wiring for separate tweeters or external crossovers. For most Scion xD owners, minimizing dash or door panel removal and avoiding custom brackets keeps labor reasonable. Check whether the speaker uses common connector types or needs adapter harnesses.
Also consider whether the speaker includes mounting hardware, grilles, and clear instructions. Clear wiring diagrams and included crossovers reduce guesswork when upgrading to higher-performance 6×8 options.
FAQ
Will 6×8 speakers fit the Scion xD doors without modification?
Many 6×8 speakers conform to standard mounting patterns and will fit the Scion xD doors with no major modification, but you should verify mounting depth and frame shape before buying. Measuring clearance behind the door panel and checking for included adapter plates helps avoid surprises. If depth is an issue, shallow-mount options or simple spacers can often resolve it.
Should I choose coaxial or component 6×8 speakers for daily driving?
Coaxial 6×8 speakers offer a straightforward upgrade with integrated tweeters that are easy to install, which suits most daily drivers. Component systems can deliver better imaging and cleaner highs, but they require additional mounting and wiring work for the separate tweeters and crossovers. Choose based on how much installation work you want and whether improved sound staging is a priority.
How important is matching power handling to my head unit?
Matching power handling and sensitivity helps ensure a speaker will perform reliably and sound good with your existing head unit. A speaker with higher sensitivity will sound louder at lower power, while adequate RMS power handling prevents distortion during dynamic peaks. If you plan to add an amplifier later, pick speakers with sufficient power handling to take advantage of that upgrade.
Can changing to aftermarket 6×8 speakers improve bass in the Scion xD?
Upgrading door speakers can improve perceived bass tightness and midbass punch, especially if the new speakers have firmer cones and better motor structures. However, full low-end extension is limited by the small door cavity and overall vehicle acoustics. For deeper bass you may need a dedicated enclosure or subwoofer in addition to upgraded door speakers.
What wiring or mounting accessories might I need for installation?
Common accessories include speaker harness adapters, mounting brackets or spacers, and longer screws or bolts to secure a different frame profile. If you install components, you may also need speaker wire for tweeter runs and a mounting solution for external crossovers. Inspect what is included with the speakers and plan for any minor hardware to avoid delays during installation.
How We Chose the Best Scion xD 6X8 Speakers
We evaluated options that specifically suit the Scion xD's speaker locations and mounting constraints, prioritizing models with documented fitment or standard 6×8 mounting patterns that minimize modifications. Key criteria included acoustic performance across the midrange and bass, power handling and sensitivity to match common head units, build quality and materials for longevity in a car environment, and ease of installation including mounting depth and connector compatibility. We also considered frequency range and presence of tweeters when selecting coaxial versus component designs, plus warranty coverage as an indicator of manufacturer confidence. Exclusions: we excluded speakers that require extensive dash or door trimming, custom enclosures, or adapters beyond basic mounting hardware, and any options lacking clear mechanical fit information for the vehicle. The final list focuses on balanced performance, reliable fit, and realistic installation effort for typical Scion xD owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
When upgrading Scion xD 6×8 speakers, prioritize mechanical fit, sensible power handling, and a sound profile that matches your listening habits. Fit and mounting depth determine how straightforward the installation will be, while sensitivity and frequency response predict how the speakers will perform with your existing head unit. Balancing durability and ease of installation against the desired sonic improvements helps you pick the most practical option. Keep in mind the tradeoffs between coaxial simplicity and component performance when planning your upgrade path.
Explore More:
- Check out all Scion xD parts & accessories
- Explore Electronics
- Browse all Accessories
