Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the factory speakers can make a dramatic difference in your driving experience by improving clarity, bass response, and overall volume. Choosing the right 6×8 speaker for a Mitsubishi Outlander matters because fit, mounting depth, and power handling affect installation and long-term performance. This guide covers the shortlisted top picks for Mitsubishi Outlander 6×8 speakers and explains the evaluation criteria used to select them, including sound quality, installation compatibility, and durability. Read on to find options that match your priorities and installation constraints.
Looking for other parts? See all Mitsubishi Outlander parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Kenwood KFC‑C6866S 6×8 2‑Way Car Speakers (Pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | Kicker KS-Series 6×8 Coaxial Speakers (Pair) |  |
| Best Quality Built to a higher standard if you want something more solid | KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Bundle with Harness (4-pack) |  |
| Best Budget The cheapest option that still gets the job done reliably | Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (4-Pack) |  |
| Most Sold A high-volume bestseller chosen again and again | Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs) |  |
| Best Value for Money The sweet spot between price and what you get | JBL Club 8620 5×7/6×8 2‑Way Coaxial Car Speaker Pair |  |
| Best Overall The best all-around choice for most situations | ORION Cobalt CM6854 6×8 Mid-Range Bullet Car Speakers (Pair) |  |
1. Kenwood KFC‑C6866S 6×8 2‑Way Car Speakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| Max Power | 250 watts |
| RMS Power | 30 watts |
| Tweeter Diameter | 1 Inches |
| Speaker Size | 8 Inches |
The Kenwood KFC-C6866S is a direct-replacement 6×8 coaxial speaker pair designed to upgrade a factory sound system with minimal fuss. In everyday use these speakers provide improved midrange punch from the polypropylene paper woofers and clearer high end from the 1-inch PEI balanced-dome tweeters, so vocals and instruments come through with more detail than typical stock units. Their shallow mounting height helps them fit a wider range of factory mounting locations in doors and rear panels, and the enlarged magnet circuit and sound field enhancer in the design aim to tighten response for listening at road volumes. They are wired, car-mount speakers intended to run off a standard head unit or modest aftermarket amplifier. Limitations include modest bass extension compared with separate component systems or subwoofers and the included hardware may require vehicle-specific adapters for a clean install; users relying on deep low-frequency impact will want to add a subwoofer for full-range sound.
Best for: Reliability-focused buyers who want a straightforward, durable speaker upgrade that improves clarity and midrange detail while preserving factory installation simplicity.
Less Ideal for: Audiophiles seeking deep bass or owners who want a full component system with separate crossovers and dedicated woofers without adding a subwoofer.
- Designed for direct replacement installs with shallow mounting profile to fit many factory locations
- Polypropylene paper cone and enlarged magnet circuit give stronger midbass and clearer midrange than typical stock speakers
- 1-inch PEI balanced-dome tweeter improves high-frequency detail and clarity
- Wired coaxial design is simple to power from a factory head unit without extra crossovers
- Not designed for strong low-frequency bass so will lack deep punch without a separate subwoofer
- May require speaker adapters or brackets for a perfect fit in some vehicle doors
Verdict A practical, reliable 6×8 replacement that sharpens highs and midbass for better everyday listening but will need a subwoofer for real low-end impact.
2. Kicker KS-Series 6×8 Coaxial Speakers (Pair)
| Speaker size | 6×8 |
|---|---|
| Tweeter | 0.75 inch |
| Impedance | 4 Ohm |
| Speaker design | 2-way coaxial |
| Manufacturer | Kicker |
The Kicker KS-Series 6×8 coaxial pair replaces factory door or rear speakers to deliver clearer highs and stronger midbass without major modifications. These speakers use internally damped polypropylene woofers and rubber surrounds for tighter midrange and punchy low end while the .75" tweeters provide articulate highs that stay smooth at higher volumes. The design minimizes tweeter protrusion so they fit most factory mounting locations with the supplied brackets and hardware, making installation straightforward for a convenience-focused owner. They handle moderate amplifier power and respond well to basic head-unit or modest aftermarket amps, revealing more detail from EQ adjustments than many stock speakers. Limitations are that they are not a substitute for a dedicated subwoofer for deep bass and they benefit from an amp or careful equalization to reach their full potential. Also, some installers may need to manage low-frequency routing if using a powerful amp to avoid overdriving the cones.
Best for: A convenience-driven buyer who wants a straightforward, noticeable upgrade over factory speakers with easy bolt-in installation and minimal trimming or custom work.
Less Ideal for: Audiophiles seeking full-range sound including deep bass without adding a subwoofer, or DIY modifiers who prefer component speaker systems for custom sound staging.
- Zero or minimal tweeter protrusion for easy fitment in many factory speaker locations.
- Internally damped polypropylene cones and rubber surrounds for improved midrange detail and durable bass response.
- Includes mounting brackets and basic wiring hardware to simplify installation.
- Handles moderate amplifier power and responds well to tuning via head-unit EQ or a small amp.
- Not designed to reproduce deep sub-bass so a dedicated subwoofer is needed for low-frequency extension.
- May require an external amplifier or careful EQ to reach maximum clarity and volume without distortion.
Verdict A user-friendly 6×8 coaxial upgrade that improves clarity and midbass for Mitsubishi Outlander owners without complicated installation, but not a replacement for a subwoofer.
3. KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Bundle with Harness (4-pack)
| Speaker Type | Coaxial |
|---|---|
| Impedance | 4 Ohms |
| RMS Power | 50 watts |
| Frequency Response | 45-20,000 Hz |
| Included Components | 2 pairs of 6×8 speakers and 2 pairs of harnesses |
These KICKER DS Series 6×8 speakers are a direct-replacement upgrade package that pairs two-way coaxial drivers with vehicle-specific harnesses to simplify installation. In practice the bundle replaces factory door speakers and is most often used to improve clarity and volume on a stock head unit without adding an external amplifier. Notable features include polypropylene cones, acoustic-foam ribbed surrounds, a half-inch dome tweeter and a quoted 50 watts RMS (200 watts peak) which translates to stronger midrange presence and cleaner highs than most stock 20 W drivers. The included plug-and-play harnesses avoid cutting or splicing and speed installation into factory wiring. Limitations to expect are modest bass extension compared with powered systems or larger woofers and sensitivity to correct wiring polarity on some vehicles, which can noticeably affect imaging if left reversed. For performance-focused upgrades on a budget these speakers deliver clearer, louder sound but they are not a replacement for a system that needs deep bass or high-power amplification.
Best for: Performance-oriented buyers who want a clear, no-fuss upgrade to factory door speakers and prioritize improved clarity and volume from their stock system.
Less Ideal for: Buyers seeking deep bass or those planning a high-power, amplifier-driven overhaul should consider larger speakers or a dedicated subwoofer instead.
- Vehicle-specific harnesses for plug-and-play installation with no cutting required
- 2-way coaxial design with dome tweeter for improved high-frequency detail
- Polypropylene cone and ribbed surround for durability and cleaner midbass
- Matched 4-ohm impedance and 50 watts RMS rating suitable for most factory head units
- Limited low-frequency extension compared with larger speakers or a powered subwoofer
- Not optimized for high-power, amp-driven systems seeking audiophile-level fidelity
Verdict A straightforward, performance-oriented 6×8 speaker upgrade that brings clearer highs and louder midrange to factory systems but will not replace a powered subwoofer for deep bass.
4. Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (4-Pack)
| Impedance | 4 Ohms |
|---|---|
| RMS Power Handling (CEA426B) | 90 W |
| Max Power | 250 W |
| Frequency Response +/-3dB | 46 Hz – 20 kHz |
| Sensitivity (1W/1m) | 88 dB |
The Hifonics ZS5768CX is a four-piece coaxial speaker set intended as a direct factory replacement for vehicles that use 5×7 or 6×8 dash or door locations, making it a practical upgrade for a Mitsubishi Outlander with compatible openings. These speakers provide a Neo-Mylar soft dome tweeter and alpha-cellulose cones paired with a passive Butterworth crossover to cleanly separate highs from mid-bass. In real-world use they brighten highs and add punch to mid-bass compared with many worn factory speakers, and several owners report louder output from a stock head unit without needing an amplifier. Construction details like a stamped steel basket, Kapton voice-coil former, and braided tinsel leads suggest durability for everyday driving. Limitations are that they are not waterproof so exposure in door locations could be a concern and sensitivity is modest, so very high volume seekers or those demanding deep sub-bass will notice limits unless an amplifier and subwoofer are added. Fitment varies by model year so minor modification or adapter plates may be required for some Outlander installations.
Best for: Budget-conscious owners looking to restore or modestly improve sound in a Mitsubishi Outlander without replacing the head unit or adding amplification.
Less Ideal for: Audiophiles seeking deep bass or extremely high-volume performance and drivers who plan heavy off-road exposure where speakers may be exposed to water.
- Fits common factory 5×7 or 6×8 openings for straightforward replacement in many vehicles
- Neo-Mylar tweeter and passive crossover deliver clearer highs and smoother transitions
- Alpha-cellulose cone and rubber surround provide improved mid-bass punch over typical worn factory speakers
- Sturdy stamped steel basket and Kapton voice-coil former designed for durability under normal use
- Not rated waterproof so door installations may be vulnerable to moisture over time
- Sensitivity is moderate so loud, distortion-free output at high volume may require an external amplifier
Verdict A cost-effective, factory-replacement 6×8/5×7 speaker set that noticeably improves clarity and mid-bass for Outlander owners on a tight budget, though it is best paired with modest listening levels or added amplification for serious volume.
5. Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Sensitivity | 92 dB |
| Impedance | 4 Ohms |
| Power Handling | 350 Watts Max / 35 Watts RMS each |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws, Installation Manual |
The Alphasonik AS268P ships as two pairs of 6×8 3-way coaxial speakers aimed at straightforward factory replacement in vehicles that accept 6×8 speakers. They are typically used to swap out weak factory units to gain clearer mids and more presence without adding an amplifier. Notable features include a three-way driver design, 92 dB sensitivity, 4 ohm impedance, and 350 watts peak (35 watts RMS each) which matches the output of most factory head units. The kit includes pigtail leads, mounting screws, and a manual to simplify installation. In practice these speakers give noticeably better vocal clarity and higher volume than many stock Outlander door speakers, and reviewers report easy bolt-in installs or minor adapter use. Limitations are their modest continuous power rating and ferrite magnet construction, so they will not produce deep, tight bass on their own and benefit from adding a dedicated subwoofer or amp if you want fuller low end. Build quality is good for the price but not on par with premium brands.
Best for: Risk-averse mainstream buyers who want an affordable, straightforward upgrade from factory speakers for more clarity and volume without changing the stereo or adding an amp.
Less Ideal for: Audiophiles or buyers seeking powerful, deep bass from door speakers alone should look at higher-RMS speakers plus a subwoofer and amplifier instead.
- Includes two pairs with pigtail leads and mounting hardware for a near-complete replacement kit
- 92 dB sensitivity and 3-way design improve vocal clarity and high-frequency detail over many stock speakers
- 4 ohm impedance and conservative RMS rating make them compatible with factory head units without requiring an amp
- Shallow mounting depth and common 6×8 footprint simplify installation in standard door locations
- 35 watts RMS per speaker limits clean volume headroom and low-frequency output without an external amplifier
- Ferrite magnet and budget materials mean bass extension and durability lag compared with higher-end speakers
- Not water resistant so exposure to moisture in door cavities could reduce long-term reliability
Verdict A cost-effective, easy-to-install 6×8 speaker kit that noticeably upgrades clarity over Mitsubishi Outlander factory speakers but needs a sub or amp for strong bass.
6. JBL Club 8620 5×7/6×8 2‑Way Coaxial Car Speaker Pair
| Speaker configuration | 2‑Way coaxial |
|---|---|
| Woofer diameter | 6 inches |
| Impedance | 3 Ohms |
| Power handling (RMS) | 55 watts each |
| Frequency response | 65 Hz – 20 kHz |
The JBL Club 8620 is a budget-friendly 2‑way coaxial speaker pair intended as a direct upgrade for common 5×7 or 6×8 openings. It combines a polypropylene woofer with an edge‑driven PEI balanced dome tweeter and comes with the small passive crossovers needed for clean high‑frequency roll‑off. In real use the speakers deliver a punchy midbass and clear treble at typical car listening levels, and many owners report good performance when driven by a modest aftermarket amp or even a factory head unit. Practical accessories like multiple tweeter mounting options are included, but the package does not contain long hookup wires or extensive sealing hardware for adapters, so you should plan to buy small extras during installation. Because these are 3 ohm speakers with 55W RMS per speaker peak handling, they pair well with lightly powered setups or an entry‑level amp for improved dynamics. They are a sensible, cost‑effective swap when you want noticeably better clarity and bass over stock speakers without moving to component systems.
Best for: Practical optimizers who want a clear, affordable upgrade to their Outlander’s factory speakers that improves sound without a major system overhaul or high cost.
Less Ideal for: Audiophiles seeking top-tier resolution or users planning a high‑power component system who need separate component speakers and higher power handling.
- Designed to fit 5×7 or 6×8 openings for straightforward replacement in common locations
- Includes a PEI balanced dome tweeter and passive crossovers for clearer highs and controlled frequency split
- Reportedly strong midbass and good clarity even when powered by a factory head unit
- Multiple tweeter mounting options increase installation flexibility
- Does not include speaker hookup wires or full sealing foam for adapters which adds minor extra cost at install
- Lower impedance (3 ohms) can draw more current from weak factory head units and may benefit from an amplifier
Verdict A cost‑effective plug‑and‑play 6×8/5×7 speaker upgrade that brings clearer highs and punchier midbass for Outlander owners who prioritize practical, budget‑minded improvement.
7. ORION Cobalt CM6854 6×8 Mid-Range Bullet Car Speakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| Power (RMS) | 250W |
| Power (Max) | 1000W |
| Sensitivity | 92 dB |
| Voice Coil | 1.5" high-temperature |
The ORION Cobalt CM6854 pair are midrange bullet loudspeakers built for in-vehicle audio upgrades where clarity and volume matter. They handle up to 1000W peak and 250W RMS at 4 ohms, use a 1.5" high-temperature voice coil and claim 92 dB efficiency, which makes them well suited to work both with headunit power and an aftermarket amplifier. In use they emphasize clear mids and extended highs thanks to the bullet tweeter design while still pushing solid low-mid presence for a fuller soundstage. Installation can be straightforward but many users report the large magnet and mounting depth require checking Outlander speaker cutouts or using adapters and longer fasteners. Practical benefits include high sensitivity for louder output with less amp power and durable construction for car environments. Limitations are the bulky magnet that can conflict with tight door pockets and the need for careful amp tuning to avoid overheating the voice coil at high power levels.
Best for: Balanced buyers who want a noticeable sound upgrade for their Mitsubishi Outlander without committing to a full component system and who value loud, clear mids and highs for varied music genres.
Less Ideal for: Drivers seeking a drop-in, shallow-depth factory-style replacement or those who want full-range coaxial speakers without adding an amplifier or mounting adapters.
- High sensitivity (92 dB) produces louder sound with less amplifier power
- 250W RMS power handling supports dynamic, distortion-free playback when paired with proper amplification
- Bullet tweeter design extends high-frequency clarity without sacrificing midrange body
- Pair includes two midrange speakers suitable for replacing factory mid drivers
- Large magnet and relatively deep mounting can interfere with some factory mounting locations in tight door or rear deck spaces
- Not a coaxial design so may require enclosure or additional components to fully cover all frequency ranges
Verdict A powerful, high-sensitivity 6×8 midrange pair that delivers loud, clear mids and highs for an Outlander upgrade but requires checking fitment and possible mounting adapters.
Choosing the Right Mitsubishi Outlander 6X8 Speakers: Key Factors to Consider
Physical Fit and Mounting Depth
Correct physical fit is essential because the speaker must sit properly in the Outlander door without interference from window mechanisms or inner door panels. Measure mounting depth and speaker diameter before buying to avoid needing shims or cutting.
Mounting depth influences whether the speaker will contact internal components or the door skin when the window is operated. Also check bolt pattern and mounting holes; some replacement speakers include adapter plates to match factory locations. A close fit reduces rattles and ensures stable driver alignment, which improves sound and lowers the risk of installation-related damage.
Power Handling and Sensitivity
Power handling ratings tell you how much continuous and peak power a speaker can accept. Choose speakers whose RMS rating matches the output of your head unit or amplifier to avoid distortion or damage. Sensitivity indicates how loudly a speaker plays at a given power level; higher sensitivity can deliver more volume from a lower-powered source.
Balancing RMS and sensitivity matters because high-power speakers with low sensitivity may need an amplifier to sound their best. Conversely, high-sensitivity speakers pair well with factory radios but may reach limits earlier if driven hard. Consider both specs together for a stable, efficient system.
Driver Design and Sound Profile
Coaxial and component designs produce different results. Coaxial speakers combine tweeter and woofer in one unit for simpler installation and decent all-around performance. Component setups separate tweeter and woofer for improved imaging and cleaner high frequencies but usually require more installation work.
Also consider cone material, surround type, and tweeter construction. Stiffer cones often produce tighter bass while softer materials can sound warmer. Tweeter type affects treble clarity and dispersion. Choose a driver design that matches your listening preferences and the acoustic characteristics of the vehicle cabin.
Installation Features and Hardware
Supplied mounting hardware, adapter plates, and plug-and-play connectors reduce installation time and the chance of wiring mistakes. Look for speakers that include spacers or mounting plates if the factory holes do not match the replacement pattern. Grilles and edge design can also affect whether the speaker will clear the door panel when reassembled.
Good installation features lessen the need for additional parts and help maintain factory appearance. Fast, secure mounting prevents vibration-related noise and preserves speaker alignment, which helps sustain consistent sound quality over time.
Durability and Weather Resistance
Speakers mounted in door locations are exposed to temperature swings and humidity, so durable materials and protective coatings matter. Look for corrosion-resistant mounting hardware, treated surrounds, and UV-resistant cones that can handle sunlight and moisture that enters through door seams.
Long-lasting construction reduces the likelihood of early failure and maintains sound quality over years of use. Durable speakers also retain their mechanical properties, which helps prevent distortion and keeps performance predictable as components age.
Frequency Response and Tonal Balance
Frequency response range gives a sense of how much low end and high end the speaker can reproduce. A wider response is not always better, but it can indicate fuller sound if the rest of the system supports it. Pay attention to how the speaker balances mids and highs, since clarity in vocals and instruments depends on midrange performance.
Tonal balance influences whether you will need an external equalizer or amplifier to achieve your desired sound. Speakers that emphasize the midrange often improve vocal presence, while those with extended low-frequency response can reduce the need for a subwoofer in everyday listening.
FAQ
Can I replace Mitsubishi Outlander door speakers with 6×8 inch car speakers without modifying the doors?
Often you can, but it depends on mounting depth and bolt pattern. Many aftermarket 6×8 car speakers are designed to fit common factory locations, but you should check the mounting depth and mounting hole layout before buying. Adapter plates or shallow-mount models can eliminate the need for cutting or fabrication.
Do I need an amplifier for high power 6×8 speakers in my Outlander?
It depends on the speakers' sensitivity and the power output of your head unit. High power speakers with low sensitivity typically benefit from an external amplifier to reach clean volume levels. If your factory radio has limited output, an amp can reduce distortion and unlock better dynamics.
Are coaxial 6×8 speakers a good choice for door replacements?
Yes, coaxial 6×8 speakers are a practical option because they combine the woofer and tweeter into one unit, simplifying installation in the door. They usually provide a balanced sound for most listeners without the complexity of mounting separate tweeters.
How important is mounting depth when choosing 6×8 speaker replacement options?
Mounting depth is critical because insufficient clearance can cause the cone or magnet to contact the door or window mechanism. Always measure available depth and compare it to the speaker specification. Choosing a shallower speaker or using a spacer can prevent interference and installation problems.
Will upgrading to 6×8 aftermarket speakers improve bass in the Outlander?
Upgrading can improve bass clarity and impact if the replacement speakers have better cone design and greater excursion than the factory units. However, door-mounted 6×8 speakers have physical limits, so for deep lows a dedicated subwoofer may still be necessary. Proper installation and enclosure considerations will also affect bass performance.
How We Chose the Best Mitsubishi Outlander 6X8 Speakers
We focused on attributes that matter for replacing door speakers in a Mitsubishi Outlander. Key evaluation criteria included mounting depth and physical fit to ensure a straightforward installation without modifying the door, power handling and sensitivity to match common factory and aftermarket head units, frequency response and driver design to assess clarity and bass reproduction, build quality and materials for long-term durability in a vehicle environment, and installation features such as mounting hardware, connectors, and grille design. We excluded options that require substantial door modification or custom fabrication, units with unclear specifications, and models intended for non-car use. Our process prioritized products that balance real-world fitment, reliable performance, and straightforward installation while flagging tradeoffs like power needs versus sensitivity.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing Mitsubishi Outlander 6×8 speakers, prioritize physical fit and mounting depth first to avoid installation headaches. Next, match power handling and sensitivity to your head unit or planned amplifier so the speakers perform reliably and cleanly. Consider driver design and build quality to achieve the tonal balance you want, and pay attention to installation features and weather resistance for long-term reliability. Balancing these factors will help you select speakers that deliver the sound and durability suited to your driving needs.
Explore More:
- Check out all Mitsubishi Outlander parts & accessories
- Explore Electronics
- Browse all Accessories
