Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want a modest ride height increase for your Chevrolet Colorado without drastically changing handling, a 2 inch lift kit is a common choice. A small suspension lift helps clear larger tires, improve ground clearance, and allow for light off-road use while keeping daily drivability relatively intact. This guide covers the top 2 inch lift kits shortlisted for the Colorado and explains how they were evaluated for fit, ride quality, and installation practicality.Below you will find our top five picks for Chevrolet Colorado 2 inch lift kits along with clear guidance on compatibility, installation considerations, and what tradeoffs to expect when raising your truck two inches.
Looking for other parts? See all Chevrolet Colorado parts & accessories.
Top Picks at a Glance
| Best Overall Lift Kit The best all-around 2 inch lift kit for most buyers | Rough Country 2" Leveling Kit for Chevy Colorado / GMC Canyon (Model 922) |  |
| Best Budget Lift Kit A low-cost 2 inch lift kit that still performs reliably | C-Tzu 2" Leveling Kit for Chevrolet Colorado / GMC Canyon (2015–2023) |  |
| Best Complete Lift Kit Includes all necessary parts for a full, out-of-the-box install | Superlift Suspension 2" Complete Lift Kit for 2023-2024 Chevrolet Colorado/GMC Canyon 4WD (K1070) |  |
| Best Bolt-On Lift Kit Designed for straightforward, minimally invasive bolt-on installation | ZY WHEEL 2" Front Leveling Kit Steel Strut Spacers for 2015–2022 Chevy Colorado / GMC Canyon |  |
| Best Heavy-Duty Lift Kit Built with reinforced components for tougher loads and use | Truxxx 2" Front / 1" Rear Lift Kit for Chevrolet Colorado & GMC Canyon (2015–2022) |  |
1. Rough Country 2" Leveling Kit for Chevy Colorado / GMC Canyon (Model 922)
Best Overall Lift Kit
| Maximum Lifting Height | 2 Inches |
|---|---|
| Included Components | Upper strut spacers, Pre-load spacers, Hardware |
| Automotive Fit Type | Vehicle Specific Fit |
| Construction | Drilling Required: No |
This Rough Country 2" leveling kit uses durable upper strut spacers plus a preload spacer to raise the front of Chevrolet Colorado and GMC Canyon trucks two inches, restoring a level stance and allowing up to a 265/70/17 tire on factory wheels. Installation requires strut disassembly but is a bolt-on procedure with no drilling or cutting, so a competent DIYer with basic tools can complete it at home and return the truck to stock later if desired. The kit is vehicle-specific, supports both 2WD and 4WD (not ZR2), and aims to keep a factory-like ride by maintaining the stock strut geometry. Practical benefits include improved ground clearance for light off-road obstacles, a more balanced look front-to-rear, and compatibility with Duramax diesel models. Limitations are that it does not fit ZR2 trims, strut disassembly is necessary which adds time and complexity, and aftermarket wheels or spacers should be hub-centric to avoid fitment issues.
Best for: DIY-minded owners who want a reliable, factory-compatible 2" front level lift that balances ride comfort and durability and can be installed at home with basic tools.
Less Ideal for: Owners who want a bigger lift, plan heavy off-road modification, or those unwilling to disassemble struts should consider other suspension options or professional installation.
- Vehicle-specific design for 2015–2022 Colorado/Canyon for straightforward fitment
- Bolt-on installation with no drilling or cutting required
- Maintains near-factory ride quality while providing 2" lift and improved ground clearance
- Allows up to 265/70/17 tires on factory wheels without additional suspension changes
- Requires strut disassembly which adds installation time and needs basic mechanical skill or tools
- Not compatible with ZR2 models
Verdict: The best overall lift kit balances ride quality, durability, ease of installation, and parts completeness to suit the widest range of DIY mechanics.
2. C-Tzu 2" Leveling Kit for Chevrolet Colorado / GMC Canyon (2015–2023)
Best Budget Lift Kit
| Maximum Lifting Height | 2 Inches |
|---|---|
| Auto Part Position | Upper |
| Material Type | Metal |
| Included Components | 2 preload spacers, 2 upper strut spacers |
This C-Tzu leveling kit is a simple bolt-on solution that lifts the front of compatible Colorado and Canyon trucks by up to 2 inches to improve ground clearance and create room for slightly larger tires. The kit includes metal upper strut spacers and preload spacers and is designed for vehicle-specific fitment on 2WD and 4WD models (not for Trail Boss/ZR2 or Multimatic DSSV-equipped AT4X). Installation requires strut removal but uses a no-cut, no-drill bolt-on approach that makes it a straightforward DIY or shop job. The spacer construction is described as heavy-duty PA material backed by metal components, aiming for decent durability at a low cost. Performance-wise you get the expected leveling and improved stance with minimal change to ride geometry, but this is a basic kit with no adjustable components and it does not address rear suspension or advanced handling tuning. Choose this if you want an affordable, factory-matching front lift and are prepared to accept a simple spacer-style upgrade rather than a full suspension overhaul.
Best for: Cost-conscious owners seeking a straightforward, factory-matching 2-inch front lift to improve clearance and fitment for larger tires without a full suspension upgrade.
Less Ideal for: Buyers wanting adjustable leveling, full suspension lift kits, heavy off-road use, or fitment for Trail Boss/ZR2 and Multimatic DSSV AT4X models should look elsewhere.
- Vehicle-specific fit for 2015–2023 Colorado and Canyon 2WD/4WD (except specified models)
- Bolt-on design requires no cutting or drilling for installation
- Raises front ride height up to 2 inches to increase clearance and allow larger tires
- Includes both upper strut spacers and preload spacers for a complete front lift
- Does not include rear lift or adjustable components to fine-tune alignment or handling
Verdict: The best budget lift kit delivers reliable 2 inch lift performance with essential components and acceptable durability for cost-conscious buyers.
3. Superlift Suspension 2" Complete Lift Kit for 2023-2024 Chevrolet Colorado/GMC Canyon 4WD (K1070)
Best Complete Lift Kit
| Fitment | 2023-2024 Chevrolet Colorado/GMC Canyon 4WD |
|---|---|
| Maximum Lifting Height | 2 inches |
| Auto Part Position | Front, Rear |
| Material Type | Alloy Steel |
| Included Components | Instruction Manual, Hardware, Rear Lift Blocks, Strut Spacers |
This Superlift 2" complete lift kit is designed to raise the front about 2 inches and the rear about 1 inch on 2023–2024 Chevrolet Colorado and GMC Canyon 4WD models to achieve a level stance and allow larger tires. It ships with front lower strut spacers, rear lift blocks, u-bolts, hardware, and a detailed instruction manual so a single-install approach is possible without hunting for extra parts. The kit is made from alloy steel and promoted as made in the USA with a lifetime limited warranty, which helps with long-term confidence. Expect a straightforward installation for a buyer comfortable with basic suspension work or a shop install; the kit does not include replacement shocks or upgraded struts so it relies on the truck's factory dampers. It is explicitly not compatible with ZR2 models and is sized to clear up to 32" tires on standard models and 33" on AT4s, so choose tires accordingly. If you want a simple, vehicle-specific lift that bundles the common hardware for a one-stop lift project, this kit fits that role well.
Best for: Buyers who want a single-package, vehicle-specific leveling and mild lift solution that minimizes extra parts purchases and simplifies a one-time install.
Less Ideal for: Drivers seeking a full suspension overhaul with new shocks, aggressive lift height, or compatibility with ZR2 off-road variants should look for a different kit or a custom solution.
- Vehicle-specific fit for 2023–2024 Colorado/Canyon 4WD for a straightforward install
- Includes core hardware: strut spacers, rear lift blocks, u-bolts and detailed instructions
- Made from alloy steel and backed by a lifetime limited warranty
- Allows larger tires (up to 32" standard, 33" for AT4) for improved off-road capability
- Does not include replacement shocks or upgraded dampers, so ride characteristics remain dependent on factory components
- Not compatible with ZR2 models
Verdict: The best complete lift kit includes everything needed—hardware, spacers, shocks or struts where applicable—to minimize additional purchases and simplify a single-install project.
4. ZY WHEEL 2" Front Leveling Kit Steel Strut Spacers for 2015–2022 Chevy Colorado / GMC Canyon
Best Bolt-On Lift Kit
| Auto Part Position | Front |
|---|---|
| Material | Alloy Steel |
| Maximum Lifting Height | 2 Inches |
| Included Components | Strut spacers, installation hardware |
| Automotive Fit Type | Vehicle Specific Fit |
This bolt-on leveling kit raises the front of 2015–2022 Chevy Colorado and GMC Canyon trucks by roughly 2 inches using steel strut spacers and included installation hardware. Designed for straightforward installation, the kit replaces the top of the front strut with a spacer assembly that does not require cutting, welding, or replacement of major suspension components. Typical installs take about 1 to 2 hours per side with basic hand tools and a recommended wheel alignment afterwards to preserve handling. The steel construction should provide solid durability and the spacer thickness gives extra fender clearance for slightly larger tires and a more aggressive stance. It is vehicle-specific and explicitly does not fit ZR2 models. Buyers should note the marketed lift height and spacer thickness are not identical, so expect a smaller net lift than the nominal 2 inches; ride quality and steering geometry can change enough that alignment is important. This kit is a practical, low-complexity option for DIYers who want a leveled look without overhauling the suspension.
Best for: DIY owners who want a simple, no-cut front leveling solution to improve stance and gain modest tire clearance while keeping installation time and complexity low.
Less Ideal for: Drivers seeking a full suspension overhaul, more than a mild lift, or fitment for ZR2 models should look at different kits or professional suspension upgrades.
- True bolt-on installation using steel strut spacers and basic hardware
- Vehicle-specific fit for 2015–2022 Colorado and Canyon non-ZR2 models
- Adds front clearance and a leveled, more aggressive stance
- Ships with installation hardware so no extra parts needed
- Advertised lift height differs from actual spacer thickness so net lift may be less than 2 inches
- Limited to front lift only and does not address rear suspension balance beyond leveling
Verdict: The best bolt-on lift kit emphasizes simple hardware replacement and no-cut installation to reduce install time and complexity for DIY mechanics.
5. Truxxx 2" Front / 1" Rear Lift Kit for Chevrolet Colorado & GMC Canyon (2015–2022)
Best Heavy-Duty Lift Kit
| Front Lift | 2 inches |
|---|---|
| Rear Lift | 1 inch |
| Compatible Years | 2015-2022 |
| Material Type | Carbon Steel |
This Truxxx kit is a straightforward bolt-on solution that lifts the front 2 inches and the rear 1 inch to correct nose-down stance and create clearance for larger tires on 2015–2022 Chevrolet Colorado and GMC Canyon trucks. Installation uses two front strut spacers, rear blocks, sway bar extension, u-bolts and all necessary hardware with detailed instructions, so a competent DIYer or shop can complete it in a few hours followed by an alignment. The kit is designed to keep factory ride and work with stock struts and shocks, which preserves daily driving comfort while giving modest ground clearance gains for light off-road use or truck appearance upgrades. Parts are laser-cut from North American steel and come with alignment specs included. For buyers seeking a heavier-duty upgrade, note this kit is a leveling/lift kit rather than a full suspension reinforcement package, so it does not include upgraded longer shocks, reinforced control arms, or heavy-duty mounts intended specifically for sustained towing with extreme payloads.
Best for: Truck owners who want a clean, factory-friendly 2" front/1" rear lift to fit larger tires and improve stance while keeping stock ride and relatively simple installation.
Less Ideal for: Drivers who regularly carry heavy payloads, tow large trailers, or need a suspension engineered for constant heavy-duty use should choose a reinforced lift or suspension upgrade instead.
- Direct bolt-in design with all required hardware and instructions for relatively quick installation
- Retains factory ride quality and is compatible with stock struts and shocks
- Laser-cut North American steel construction and manufactured hardware
- Includes sway bar extension and alignment specs to simplify setup after installation
- Does not include reinforced mounts, upgraded shocks, or heavy-duty components for high payload or towing stress
Verdict: The best heavy-duty lift kit features thicker materials, reinforced mounts, and upgraded hardware to withstand heavier payloads, towing, and more demanding driving conditions.
Choosing the Right Chevrolet Colorado 2 Inch Lift Kit: Key Factors to Consider
Fitment and Model-Year Compatibility
Accurate fitment is the baseline for any lift kit. Chevrolet Colorado suspension and steering component locations change across production years and configurations. Confirm the kit lists explicit compatibility with your Colorado model year and whether it supports your cab and bed configuration. Mismatched fitment can lead to steering bind, brake line tension, or incorrect mounting points.
Also check whether the kit requires additional parts for specific trims such as four-wheel drive or vehicles equipped with electronic stability systems. Even within a single model, options like factory tow packages or upgraded brakes may need small supplementary brackets or adapters, so verify those details before purchasing.
Ride Quality and Suspension Geometry
A 2 inch lift is small but can still alter suspension geometry and shock travel. Some kits use spacers or strut extensions that preserve factory geometry more closely, while others introduce new components like longer coils or different upper mounts that change damping characteristics.
Consider how the kit affects on-road comfort, bump steer, and articulation. If you daily drive your Colorado, prioritize kits designed to retain a compliant ride and to minimize negative impacts on alignment. Understand whether the kit requires aftermarket shocks or if it works with factory dampers; pairing with appropriate shocks often makes the biggest difference in real-world comfort and control.
Tire Clearance and Brake Line Length
One main reason for a 2 inch lift is to run larger tires. Determine the maximum tire diameter and width the kit supports without trimming or modifying fenders. Clearances for suspension components, sway bar links, and brake calipers must all be considered when moving to wider tires.
Lift kits can also affect brake line stretch. Check whether the kit includes brake line brackets or extended lines if necessary. Failing to address brake line length and routing can create safety issues under suspension droop or full compression.
Installation Complexity and Required Tools
Installation time and complexity vary from simple bolt-on spacer kits that can be installed with basic garage tools to more involved kits that require control arm removal, spring compressors, or alignment equipment. Realistically assess your skill level and workshop resources before choosing.
Some kits are advertised as 'home installable' but still require an alignment after fitting. Confirm whether the kit includes all necessary hardware and instructions, and whether professional installation is recommended for safety-critical steps like torquing suspension bolts or handling coil springs.
Alignment and Handling Tradeoffs
Raising the ride height changes suspension angles and alignment settings such as camber and toe. A quality 2 inch kit should either maintain factory geometry or provide components and instructions to return alignment to safe ranges. Poor alignment can lead to uneven tire wear, reduced stability, and increased steering effort.
Some kits include adjustable control arms or alignment cams to help correct these changes; others rely on a standard alignment shop to make the necessary corrections. Factor in the cost and availability of alignment adjustments when planning a lift.
Durability and Corrosion Resistance
Suspension components are exposed to road salt, mud, and water. Look for kits with durable finishes such as powder coating or galvanized hardware, and robust welds or forged components where applicable. Hardware grade and fastener quality affect long-term reliability.
Consider the lifetime expectations for bushings and joints used in the kit. Rubber versus polyurethane bushings trade off NVH and comfort for longer life and stiffness. If you plan to use the Colorado in harsh climates or off-road, prioritize corrosion-resistant coatings and replaceable wear items.
How a 2 Inch Lift Affects On-Road Driving
A modest 2 inch lift changes the truck's center of gravity slightly and can alter handling feel, but when executed properly the difference is usually subtle. Most drivers will notice a small increase in body roll during aggressive cornering, and possibly slightly firmer ride over mid-frequency bumps depending on the kit's approach to spring and shock selection.
Street-oriented kits that use spacers or mild coil changes tend to preserve factory ride characteristics, while kits that modify mounting points or require different damping rates can create a noticeably different on-road experience. Expect an alignment after installation to restore predictable steering and tire wear patterns.
- Minor change in steering response and body roll
- Possible need for shock upgrades to maintain comfort
- Alignment necessary to avoid uneven tire wear
Fitting Larger Tires Safely
One of the main advantages of a 2 inch lift is enabling larger tire diameters without rubbing on stock components. Determine the maximum tire size supported by the kit and whether any trimming or minor modifications are required to fenders or inner liners.
When fitting larger tires, also review wheel backspacing and offset to ensure proper clearance at full droop and full compression. Combining a lift with correct wheel specifications prevents unexpected contact with suspension or brake parts.
- Check maximum supported tire diameter and width
- Verify wheel backspacing to prevent rubbing
- Inspect brake and axle clearances with intended tire choice
Installation Tips for DIY Enthusiasts
If you plan to install a 2 inch lift kit yourself, prepare a clean workspace, a proper jack and stands rated for your vehicle, and the necessary hand tools including torque wrenches. Follow the included instructions step by step and replace any worn suspension hardware encountered during the install.
Take special care when compressing or removing coil springs and observe all safety precautions. After the mechanical installation, get a professional alignment and re-torque critical fasteners after the first few hundred miles of driving.
- Use quality jack stands and torque tools
- Replace worn fasteners and bushings during install
- Schedule a post-install alignment and re-torque session
Maintenance and Long-Term Care
After installing a lift kit, periodic inspections are more important. Check fastener torque, bushing condition, and shock mounting points at regular intervals, especially after off-road use. Address surface corrosion early to prolong component life.
If the kit includes polyurethane bushings, monitor them for noise and wear differently than rubber components. Lubrication and periodic replacement of wear parts will keep handling consistent over time.
- Inspect torque and hardware after initial break-in miles
- Monitor bushings, shocks, and brackets for wear
- Treat corrosion and touch up coatings as needed
Legal and Warranty Considerations
Raising your truck can have implications for warranty coverage and vehicle inspections depending on local regulations. Check local laws about ride height limits and any inspection requirements that apply to modified vehicles.
Also be aware that some vehicle warranties may be affected if an aftermarket lift contributes to a component failure. Keep installation records and receipts for components and labor in case documentation is needed.
- Verify local ride height and modification regulations
- Keep documentation of parts and installation
- Understand potential warranty impacts before modifying
Still looking for the perfect fit?
Select your Chevrolet Colorado configuration to see the most relevant Lift Kits recommendations
How We Chose the Best Chevrolet Colorado 2 Inch Lift Kit
Our selection focused on components and designs that specifically address the needs of Chevrolet Colorado owners seeking a 2 inch suspension lift. We prioritized fitment accuracy for the Colorado chassis and model year range implicitly covered by the kit descriptions, verified component quality such as stamped steel or forged control arms, and assessed compatibility with stock and slightly larger tire sizes.Evaluation criteria included: ride quality impact under typical street and light off-road conditions, compatibility with factory steering and brake components, ease of installation including whether the kit allows for bolt-on or requires specialized tools, hardware completeness and corrosion-resistant finishes, and warranty or support from the manufacturer. We also considered how each kit manages alignment parameters to avoid excessive camber or toe changes.Exclusions: kits that require extensive cutting, frame welding, or complete suspension overhauls were excluded, as were lift solutions that do not explicitly support a 2 inch raise for the Chevrolet Colorado. We omitted multi-vehicle universal kits without Colorado-specific fitment information. The final list emphasizes practical, installable options that balance drivability and modest off-road capability.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a 2 inch lift kit allow me to fit larger tires on my Colorado?
Often yes. A 2 inch lift commonly permits moving up one tire size step without major trimming, but compatibility depends on wheel offset and tire width. Verify the kit's stated maximum tire diameter and check wheel backspacing to ensure safe clearance.
Can I install a 2 inch lift kit myself with basic tools?
It depends on the kit. Many spacer-style or bolt-on kits are within reach for experienced DIYers with proper jack stands and torque tools. Kits requiring spring compression, control arm removal, or alignment adjustments are better handled with professional help if you lack the necessary tools or experience.
Do I need new shocks with a 2 inch lift?
Sometimes. Some kits are designed to work with factory shocks for a modest lift, while others recommend longer or revalved shocks to maintain proper damping and prevent premature wear. Check the kit specifications to see if shock replacement is advised.
How does a 2 inch suspension lift compare to a leveling kit?
A 2 inch suspension lift raises the vehicle by changing suspension components and can improve clearance and articulation. A leveling kit typically raises the front only to match rear ride height. The choice depends on desired clearance, handling, and whether you want a uniform lift or just to correct rake.
What is the effect on fuel economy after installing a 2 inch lift?
Fuel impact is usually modest for a small lift, but larger tires and increased frontal area can reduce fuel efficiency slightly. The actual change depends on tire choice, driving habits, and whether the lift alters aerodynamics or rolling resistance.
Will I still need an alignment after installing a 2 inch lift?
Yes. Any suspension height change requires a professional alignment to correct camber, toe, and thrust angle. Proper alignment ensures predictable handling and prevents uneven tire wear.
Final Verdict
Choosing the right 2 inch lift kit for your Chevrolet Colorado means balancing the gains in clearance and tire fitment against changes in handling, installation complexity, and long-term maintenance. Prioritize kits that specify accurate Colorado fitment, preserve or restore suspension geometry, and include hardware to address brake line or sway bar clearance.If you plan to drive daily, favor solutions that maintain ride comfort and minimize required additional parts. For light off-road use and larger tires, confirm tire clearance limits and alignment needs so you can confidently enjoy the added capability without unexpected tradeoffs.
Explore More:
- Check out all Chevrolet Colorado parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
