Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own an Infiniti QX60, worn ball joints can undermine steering precision, tire wear, and overall ride safety. Choosing the right replacement matters because a properly matched ball joint restores correct suspension geometry and reduces play that causes vibration or unpredictable handling. This guide highlights the top shortlisted ball joints for the Infiniti QX60, explaining why each made the cut and the practical criteria used to evaluate them. Read on to learn what to prioritize when selecting a replacement and which features affect real-world performance and longevity.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
1. Detroit Axle Front Lower Control Arms with Ball Joints for 2014–2019 Infiniti QX60
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Lower |
| Material | Alloy Steel |
| Manufacturer | Detroit Axle |
This Detroit Axle kit supplies two front lower control arms with preinstalled ball joints intended to replace the factory pieces on a 2014–2019 Infiniti QX60. Installers can expect factory-style fitment and welded alloy steel construction that matches the control arm function on the QX60, restoring correct front suspension geometry and steering feel. Preinstalled ball joints and vehicle-specific fit reduce install time compared with separate components, and customer feedback shows consistent alignment retention and quiet operation once installed. The arms are manufactured and tested to typical aftermarket quality standards and come from a brand that offers a long warranty. Limitations to note are that these are replacement suspension arms rather than performance upgrades, so they will not change ride height or handling characteristics beyond returning factory behavior, and one-off quality issues have been reported occasionally requiring inspection before installation. Expect a straightforward swap when you need to refresh worn front lower control arms on a QX60 but plan for alignment after fitting.
Best for: Reliability-focused buyers who want a direct, vehicle-specific replacement to restore factory steering and suspension behavior on an Infiniti QX60 and minimize installation uncertainty.
Less Ideal for: Drivers seeking performance suspension upgrades, altered ride height, or custom handling improvements should look at aftermarket performance arms instead.
- Vehicle-specific fit for 2014–2019 QX60 which simplifies installation
- Ball joints come preinstalled to reduce installation steps
- Alloy steel construction and factory-style design aimed at restoring original steering geometry
- Consistent customer reports of solid fit and alignment retention
- Not a performance upgrade so it restores factory behavior rather than improving handling
- Occasional quality defects reported require pre-install inspection
Verdict A straightforward, reliability-minded replacement that restores factory front suspension performance on 2014–2019 Infiniti QX60s.
2. TRQ Front Steering & Suspension 6-Piece Kit (Control Arms, Ball Joints, Tie Rods, Sway Bar Links)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Left Lower |
| Material | Alloy Steel |
| Unit Count | 6.0 Count |
This TRQ 6-piece front steering and suspension kit bundles two front lower control arms with ball joints, two outer tie rods, and two sway bar links intended as direct-fit replacements for the Infiniti QX60. It is designed for DIY convenience with pre-greased joints, anti-corrosion coating, and pre-assembled components to simplify installation and reduce prep work. The kit restores steering feel and handling by replacing multiple wear items at once, which saves time compared with sourcing parts individually. TRQ provides installation videos and clear labeling to help owners complete the job without unnecessary surprises. Expect a clear improvement in road feel and reduced play when the parts are correctly installed, though some buyers reported missing hardware for certain ball joint mountings and mixed longevity on sway bar links under heavy use. Fitment checks are important before purchase to ensure the kit matches your QX60 model year and sub-configuration. For routine front suspension refreshes this kit is a convenient, time-saving option but be prepared to supply any rare fasteners if needed during installation.
Best for: Convenience-driven buyers who prioritize time-saving, bundled repairs and want a single kit to refresh front steering and suspension on an Infiniti QX60 without hunting for individual parts.
Less Ideal for: Shoppers who need guaranteed factory-hardware inclusion or professional-grade longevity for heavy-duty driving should consider sourcing OEM or heavy-duty alternatives instead.
- Kitted set replaces multiple front steering and suspension wear items at once for faster repairs
- Pre-greased and pre-assembled components reduce installation time and prep work
- Anti-corrosion coating improves surface life for components exposed to road conditions
- Includes installation videos and clear labeling to support DIY installers
- Some buyers reported missing or incompatible mounting bolts for certain ball joint configurations
- Sway bar links have mixed reports on long-term durability under higher mileage use
Verdict If you want a convenient, DIY-friendly way to replace multiple front steering components on an Infiniti QX60, this TRQ kit bundles the needed parts, but double-check fitment and be ready to source any missing fasteners.
3. TUCAREST 10‑Piece Front Suspension Control Arm and Tie Rod Kit for 2013–2020 Nissan Pathfinder / 2014–2020 Infiniti QX60
| Fitment | 2013–2020 Nissan Pathfinder; 2014–2020 Infiniti QX60 |
|---|---|
| Kit contents | 2 lower control arms w/ ball joints, 2 inner tie rod ends, 2 outer tie rod ends, 2 sway bar end links, 2 rack boots |
| Material | Alloy steel and aluminum |
| Position | Front |
This TUCAREST kit bundles the main front suspension components you typically replace when restoring steering feel and firming up handling on a QX60: two lower control arms with ball joints, inner and outer tie rod ends, sway bar end links and rack boots. It is designed as a vehicle-specific replacement set intended for front‑end suspension refresh during a comprehensive repair or upgrade. The parts are machined alloy steel and aluminum and are claimed to follow factory-spec production with multiple quality checks during manufacturing. For a performance-oriented buyer this kit simplifies sourcing by grouping matching components and cuts installation time compared with buying pieces separately. Expect improved steering response and reduced play after installation plus the convenience of a matched set for alignment. Keep in mind this is a full mechanical replacement kit without upgraded performance bushings or adjustable geometry, so drivers looking for track-level tuning or thicker-duty motorsport components will need aftermarket performance parts instead.
Best for: Performance-oriented owners who want a matched, vehicle-specific front suspension refresh to restore steering precision and handling balance on an Infiniti QX60.
Less Ideal for: Drivers seeking race-spec adjustable control arms, polyurethane bushing upgrades, or heavy-duty competition parts should look at dedicated performance suspension components instead.
- Includes all primary front suspension components needed for a full lower-end refresh on the QX60, reducing parts sourcing hassle.
- Vehicle-specific fitment for 2013–2020 Pathfinder and 2014–2020 QX60 improves chances of correct fit and faster installation.
- Machined alloy steel and aluminum construction aims to match factory-spec durability and fit.
- Bundled parts help restore steering precision and reduce play when replaced together and followed by alignment.
- Does not include upgraded performance bushings or adjustable arms for alignment tuning.
- Kit is focused on mechanical replacement and not designed as a heavy-duty or track-oriented performance upgrade.
Verdict A convenient, factory-spec replacement bundle that restores front-end feel on the QX60 but is not a track-grade performance overhaul.
4. HAWK BROTHER Front Right Lower Control Arm with Ball Joint for Infiniti QX60 / Nissan Pathfinder
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Right Lower |
| Material | Aluminum |
| Orientation | Passengers Side |
This HAWK BROTHER front right lower control arm is a direct replacement designed for Infiniti QX60 (2014–2022) and compatible Nissan Pathfinder models. It arrives as a single passenger-side assembly with a preinstalled ball joint and silicone bushings so you can replace a worn arm without transferring parts from the old unit. Constructed from aluminum and given an electroplated finish, the arm resists corrosion better than plain steel replacements and the manufacturer adds lubricant to moving interfaces to ease installation. In practical use it restores steering geometry and ride stability, reduces road noise through the silicone bushings, and should match factory fit when the vehicle-specific fitment is confirmed. Limitations are that this is a single-side unit so buyers replacing both sides must purchase twice, and there is limited public warranty/spec detail listed which may matter to owners wanting extended coverage or OEM-matching metallurgy for heavy-duty use.
Best for: Budget-conscious Infiniti QX60 owners who want a direct replacement that restores ride feel and steering stability without paying for dealer-priced parts.
Less Ideal for: Drivers seeking factory-certified parts with extended coverage or those who prefer identical OEM metallurgy for heavy towing or performance driving should consider higher-end or dealer options.
- Vehicle-specific fit for Infiniti QX60 and compatible Pathfinder models simplifies installation
- Includes preinstalled ball joint and silicone bushings to reduce installation time
- Aluminum construction with electroplated finish improves corrosion resistance compared with untreated metal
- Sold as a single passenger-side arm so replacing both sides requires separate purchases
- Limited published warranty and detailed material specs provided
Verdict A cost-conscious direct replacement that restores handling and reduces road noise for QX60 owners, but it is sold as a single side with limited warranty detail.
5. Dorman Rear Passenger Upper Suspension Control Arm with Ball Joint Assembly
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Upper |
| Orientation | Passenger Side |
| Manufacturer | Dorman Products |
This Dorman assembly replaces the rear passenger upper control arm and includes a pre-installed ball joint and bushings for a direct-fit repair on supported Infiniti QX60 model years. It is used to restore proper rear suspension geometry, steering stability, and ride quality after a worn arm or failed ball joint. The assembly arrives ready to install and eliminates the separate press-in of a ball joint, which saves labor time for DIYers and independent shops. Dorman notes additional coatings to resist rust and corrosion, which helps longevity in climates with road salt. Fitment is vehicle-specific so confirm trim and year before buying. Some buyers reported missing hardware in a few listings, so check the package contents on arrival and be prepared to reuse or supply fasteners if needed. For owners who want a straightforward, ready-to-install replacement that mirrors factory fit and feel, this is a practical option; those needing original manufacturer parts or an upgraded performance component may prefer alternatives.
Best for: Risk-averse mainstream buyers who prioritize a dependable, vehicle-specific repair that restores factory-style ride and handling with minimal extra work.
Less Ideal for: Owners seeking genuine Infiniti OEM parts or performance-upgraded suspension components should consider manufacturer replacements or specialty upgrades instead.
- Pre-installed ball joint and bushings reduce installation time and labor
- Vehicle-specific fit designed to match factory suspension geometry
- Corrosion-resistant coatings added for longer service life
- Ships ready to paint if cosmetic matching is desired
- Some buyers reported missing mounting bolts or hardware in received packages
- Not an OEM part so minor fit or finish differences compared with factory components
Verdict A convenient, vehicle-specific rear upper control arm with a pre-installed ball joint that simplifies repair for QX60 owners who want a reliable factory-style replacement.
6. TRQ Front Passenger Lower Control Arm with Ball Joint for Infiniti QX60
| Fitment | Infiniti QX60 front passenger lower |
|---|---|
| Material | Aluminum |
| Ball Joint Mounting Type | Machined |
| Greaseable | No |
| Bushings Included | Yes |
This TRQ front lower control arm is a direct-fit replacement for the Infiniti QX60 passenger-side front suspension. It arrives as a pre-assembled unit with bushings and a machined, sealed ball joint, so it installs like a factory replacement and cuts installation time for DIYers or shops. Made from aluminum with a machined exterior, the part aims to restore steering stability and reduce clunking or uneven tire wear when an original arm has failed. TRQ also provides installation videos and a compatibility chart to confirm fitment for QX60 model years listed. Expect factory-quality fit and a corrosion-resistant finish that looks and functions like an OEM part. Limitations to consider: the arm is not greaseable or adjustable, so long-term joint service means replacing the assembly rather than re-greasing; a small number of users report premature failure in other vehicle applications, so long-term durability on heavy-duty or high-mileage QX60s is still an open question.
Best for: Practical optimizers seeking a budget-conscious, ready-to-install replacement that restores QX60 suspension geometry without modification or lengthy shop time.
Less Ideal for: Drivers who plan heavy towing, aggressive off-road use, or want long-term serviceability via regreasing should consider heavier-duty or serviceable alternatives.
- Vehicle-specific direct-fit for Infiniti QX60 passenger-side front lower location
- Pre-assembled with bushings and a sealed, machined ball joint for faster installation
- Aluminum construction with machined exterior for corrosion resistance and factory-like appearance
- Supplier provides step-by-step installation videos to help DIY fitting
- Non-greaseable and non-adjustable design requires replacing the entire arm if the ball joint wears
- Aluminum construction may be less forgiving than heavier steel arms under extreme loading
Verdict A cost-effective, direct-fit aluminum replacement that simplifies QX60 lower control arm repairs, but it is non-serviceable if the ball joint wears out.
7. Detroit Axle Rear Upper Control Arms Kit with Ball Joints and Wheel Bearing Hubs — for 2014–2019 Infiniti QX60 (AWD)
| Fitment | 2014–2019 Infiniti QX60 AWD |
|---|---|
| Kit contents | 2 rear upper control arms with ball joints, 2 rear wheel bearing hubs |
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Drive Type | 4WD/AWD |
This Detroit Axle kit supplies both rear upper control arms with pressed-in ball joints plus a pair of rear wheel bearing hub assemblies designed for AWD Infiniti QX60 (2014–2019). It is intended for owners restoring rear suspension geometry and steering feel after worn ball joints or failing hubs. The control arms come with preinstalled ball joints to simplify installation compared with sourcing separate parts, and the hubs include encoder-style ABS mounting and factory-style 5-lug flange fitment so they mate directly to the vehicle’s drivetrain. The kit notes impact and fatigue testing and carries a long manufacturer warranty. Practical benefits are straightforward: fewer separate purchases, quicker bench assembly, and restored ride stability and wheel alignment when installed correctly. Important limitations are typical of aftermarket multi-part kits — long-term durability may vary by use and driving conditions and some buyers report mixed warranty or replacement experiences for individual components. Professional installation and post-install alignment are recommended to ensure safe handling and proper wheel tracking.
Best for: Balanced owners looking for a practical, factory-style repair solution for their Infiniti QX60 who prioritize restoring handling and fitment without sourcing multiple parts separately.
Less Ideal for: Drivers seeking heavy-duty or performance-upgraded suspension components or those who prefer dealer-sourced factory parts for maximum long-term durability.
- Complete rear kit replaces both upper control arms with ball joints plus both rear wheel bearing hubs for a one-stop repair
- Preassembled ball joints reduce install steps compared with separate components
- Wheel hubs include ABS encoder provisions and match factory 5-lug flange for direct fitment
- Designed and tested to address impact, wear, and fatigue with a long manufacturer warranty
- Aftermarket kit longevity can vary and some users report premature failures on certain components
- If a single part fails you may still need to replace only that component rather than the whole kit to avoid extra cost
Verdict A convenient, factory-style rear suspension kit for AWD Infiniti QX60 owners who want a single-package replacement for worn ball joints and hubs, with reasonable fitment and simpler installation.
Choosing the Right Infiniti QX60 Ball Joint: Key Factors to Consider
Fitment and Taper Specifications
Correct fitment is essential because an exact taper, stud length, and mounting orientation ensure the replacement installs cleanly and maintains original suspension geometry. Mismatched dimensions can introduce play or stress points that accelerate wear.
Verify that the seller lists explicit compatibility with the Infiniti QX60 and includes measurable specifications where possible. When dimensions match factory tolerances, steering alignment procedures are simpler and component loading remains within intended limits, preserving tire wear patterns and handling balance.
Load Capacity and Material Strength
Ball joints must withstand vertical and lateral loads from steering and suspension travel. Materials, heat treatment, and manufacturing processes directly influence fatigue life and resistance to deformation under repeated loads.
Choose parts specified for similar load ratings to the original equipment. Stronger materials and proper heat treatment reduce the chance of early failure, especially if you carry passengers or cargo frequently or encounter rough roads that increase suspension stress.
Sealing and Corrosion Resistance
A reliable dust boot and tight seals prevent contaminants and moisture from reaching bearing surfaces. Salt, water, and dirt accelerate wear if the sealing is compromised.
Look for boots made of durable elastomers and designs that protect grease retention. Coatings such as zinc plating or other corrosion-resistant finishes on metal surfaces extend useful life, particularly in regions with road salt or heavy humidity.
Serviceability and Installation Method
Some ball joints are designed for press-fit installation while others use bolts or a replaceable stud design. The installation method affects labor time, the need for specialty tools, and the potential for installation damage.
If you plan to do the work yourself, check whether the part is compatible with common tools like a ball joint press or if it requires professional shop equipment. Also consider whether the design allows reuse of existing hardware or if a complete kit is necessary to ensure a secure fit.
Greaseability and Maintenance
Greaseable ball joints allow periodic lubrication, which can significantly extend service life by reducing metal-on-metal contact and flushing out contaminants. Non-greaseable sealed units trade off maintenance for convenience and may have a limited lifespan.
Decide based on your maintenance habits and access to service. If you prefer low-maintenance parts, sealed units are attractive, but if you expect to maintain the vehicle long-term, greaseable units offer the advantage of extended life with periodic servicing.
Warranty and Documentation
A clear warranty and accessible technical documentation indicate confidence from the manufacturer and provide recourse if a part fails prematurely. Warranty terms often reflect expected durability and quality control standards.
Prefer parts that include installation guides, torque specifications, and warranty coverage details. This information simplifies fitment verification and gives you a sense of the manufacturer s commitment to product reliability.
FAQ
How do I know if an Infiniti QX60 ball joint needs replacing?
Common signs include uneven tire wear, looseness or play in the steering, clunking noises over bumps, and noticeable wheel vibration at speed. A visual inspection may reveal torn dust boots or excessive movement when the wheel is rocked by hand. If you suspect failure, have the suspension inspected promptly because worn ball joints can affect handling and safety.
Can I replace a ball joint myself on an Infiniti QX60?
DIY replacement is possible if you have mechanical experience and the right tools, such as a ball joint press or appropriate pullers. Some jobs require removing suspension components and following correct torque specifications, so consider your comfort level and workshop resources. When in doubt, professional installation reduces the risk of improper fitment or safety issues.
Should I choose a greaseable or sealed ball joint for this vehicle?
The choice depends on your maintenance preferences and driving conditions. Greaseable joints can be serviced to extend life, which is useful for vehicles driven in harsh environments. Sealed units require no routine maintenance but may have a finite service life. Both types can be appropriate if they meet fitment and durability expectations.
Will replacing a bad ball joint fix wheel vibration?
Replacing a worn ball joint can reduce wheel vibration if the joint was the source of play or misalignment. However, vibration can stem from multiple causes, including tires, wheel bearings, or alignment issues. A careful diagnosis helps identify whether the ball joint is the primary cause before replacing components.
What should I bring when having a ball joint installed?
Provide the installer with the vehicle s year and exact model details and the replacement part s fitment information. Ask for torque specifications and whether new hardware is included. Confirm whether an alignment is recommended after installation, because suspension geometry changes often require a follow-up alignment.
How We Chose the Best Infiniti QX60 Ball Joint
We focused on fitment, mechanical strength, sealing and corrosion protection, materials and manufacturing standards, and installation practicality when selecting products for this list. Fitment accuracy matters most because the correct taper and stud orientation preserve factory suspension geometry. Mechanical strength and fatigue resistance were weighed to assess load-bearing life under daily driving and occasional heavy loads. Sealing and corrosion protection were used to predict long-term performance in wet or salted conditions. Materials and manufacturing standards, including heat treatment and forging versus casting, were considered for durability and resistance to premature wear. Installation practicality looked at whether the design allows for easier press-in or bolt-on replacement with common shop tools. We excluded components that lacked explicit fitment information for the Infiniti QX60 or that did not meet basic safety standards. Kits missing essential hardware or those with unclear warranty or quality documentation were also omitted. The final selections balance durability, precise fitment, and serviceability for everyday driving conditions.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting a replacement ball joint for an Infiniti QX60, prioritize precise fitment, durable materials, and reliable sealing. These aspects most directly affect handling, tire life, and long-term serviceability. Balance maintenance preferences with installation practicality and warranty support. Choosing a part that matches factory specifications while offering solid corrosion protection and clear documentation will minimize surprises and keep the suspension operating safely.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Suspension & Steering
- Browse all Auto Parts
