Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you drive a Chevrolet Silverado, well-chosen running boards make getting in and out safer and more convenient while protecting the rocker panels from road debris. The right boards balance secure footing, vehicle-specific fitment, and durable materials to hold up through daily use and harsh weather. This guide gathers seven shortlisted Chevrolet Silverado running boards chosen for their fit, build quality, and installation approach. Below we outline what we evaluated so you can pick boards that match how you use your truck.
Looking for other parts? See all Chevrolet Silverado parts & accessories.
Top Picks at a Glance
1. COMNOVA 6" Stainless Steel Running Boards for 2019–2026 Chevy Silverado/GMC Sierra Crew Cab
| Vehicle Service Type | 2019-2026 Chevy Silverado/GMC Sierra 1500 Crew Cab; 2020-2026 Silverado/Sierra 2500HD 3500HD Crew Cab |
|---|---|
| Material | Stainless Steel |
| Step Width | 6 Inches |
| Weight Limit | 500 Pounds |
These COMNOVA 6-inch running boards are a direct-fit aftermarket option built for Chevy Silverado and GMC Sierra crew cabs. They mount to factory mounting points with included brackets and hardware so installation can usually be done at home without drilling. The polished stainless steel bars are corrosion resistant and use slip-resistant plastic step pads and end caps to give a secure foothold in wet conditions. The design allows the bottom mounting sliders to be adjusted forward or backward for a better fit on different trim packages. In use they provide a wide, stable step that helps shorter passengers and those carrying gear get in and out of the cab more comfortably. Expect a straightforward install and a factory-like look, though assembly of brackets can be time consuming and some hardware may benefit from extra corrosion protection over time. These boards support general everyday use and light loading but are not a heavy-equipment solution.
Best for: A reliability-focused buyer who wants a durable, factory-style running board that installs without modification and improves day-to-day accessibility for a Silverado crew cab.
Less Ideal for: Buyers needing heavy-duty, commercial-grade steps for constant loading or off-road rock protection should consider more rugged or purpose-built alternatives.
- Vehicle-specific fit for 2019–2026 Silverado and 2020–2026 Silverado/Sierra crew cabs
- Polished stainless steel construction offers corrosion resistance and a factory look
- 6-inch wide tread with slip-resistant plastic step pads for secure footing
- Includes mounting brackets and hardware for no-drill installation using factory attachment points
- Assembly and bracket installation can be time consuming and instructions are sometimes unclear
- Some support hardware may be uncoated and could benefit from additional rust protection over long-term exposure
Verdict A well-reviewed, stainless steel, no-drill running board that gives a factory look and reliable day-to-day function for Silverado/Sierra crew cabs.
2. YITAMOTOR 6.5" Stainless Steel Running Boards for Chevy Silverado/GMC Sierra Crew Cab
| Vehicle Service Type | 2019-2026 Chevy Silverado/GMC Sierra 1500 Crew Cab; 2020-2026 2500HD/3500HD Crew Cab |
|---|---|
| Material | Stainless Steel |
| Step Width | 6.5 inches |
| Weight Limit | 450 Pounds |
These YITAMOTOR running boards bolt directly to factory mounting points on Chevy Silverado and GMC Sierra crew cabs to provide an easy step in and out of the truck. Built from polished stainless steel with molded non-slip ABS step pads, they offer a wide 6.5-inch stepping surface and a claimed 450 lb capacity for everyday passenger use. Installation uses vehicle-specific brackets and hardware with no drilling required for most crew cab models, so a single-person DIY job or a quick shop install is realistic. The stainless construction and polished finish resist corrosion better than plain steel and keep the boards looking sharp, though the plastic step pads and end caps are the components most likely to show wear over time. Fit and alignment are commonly reported as accurate, but some buyers note light gauge metal compared with heavier factory replacements and difficulty sourcing replacement end caps. These are a practical, convenience-focused upgrade if you want a clean look and simple bolt-on fitment for a Silverado crew cab without expensive OEM parts.
Best for: Buyers prioritizing convenience and a clean aesthetic who want a straightforward, bolt-on running board that quickly improves access and appearance on a Silverado crew cab.
Less Ideal for: Drivers seeking the heaviest-duty, fully OEM-equivalent boards or those who need guaranteed long-term availability of replacement trim parts should consider more robust factory-style alternatives.
- Vehicle-specific brackets that bolt to existing holes for a mostly drill-free installation
- Polished stainless-steel construction offers improved corrosion resistance over plain steel
- Wide 6.5-inch non-slip step pads provide secure footing for passengers
- Supports up to 450 lb per bar, suitable for regular passenger use
- Includes full hardware and instructions to complete installation
- Plastic step pads and end caps can wear or detach and may be hard to replace
- Stainless steel appears lighter gauge than some factory-style boards, which may flex more under heavy use
Verdict A convenient, polished stainless-steel bolt-on running board that adds wide, non-slip steps and style to Silverado crew cabs, with minor durability caveats around plastic trim.
3. Tyger Auto 6.6" Blade Running Boards for 2019–2026 Chevy Silverado / GMC Sierra Crew Cab
| Material | Carbon Steel |
|---|---|
| Exterior Finish | Powder E-Coating |
| Weight Limit | 500 Pounds |
| Vehicle Service Type | Truck |
These Tyger Auto Blade running boards provide a slim, extra-wide stepping surface that bolts directly to the rocker panel of compatible 2019–2026 Chevy Silverado and GMC Sierra crew cabs. Built from carbon steel with a dual-stage E-coating powder finish and solid mounting brackets, they are meant to deliver a sturdy step and reasonable corrosion resistance for everyday use. The 6.6-inch wide tread with gill slits gives good foot traction and makes entering and exiting easier for drivers and passengers, while the low-profile design keeps a factory look. Installation is bolt-on using existing mounting holes and the included hardware, so a single person can typically fit them in under an hour. Expect a usable 500 lb weight capacity and about 12 inches of ground clearance. Limitations are typical for stamped steel boards: the finish can chip over time in harsh road conditions and exposed edges may rust if damaged, and precise alignment depends on correct bracket orientation during install. For performance-minded Silverado owners these boards balance durability and a sleek profile but are not heavy-duty rock sliders.
Best for: Performance-oriented Silverado owners who want a low-profile, factory-style running board that improves ingress/egress without adding bulky visual weight.
Less Ideal for: Owners who need heavy-duty off-road protection or rock-slider level durability should consider thicker tubular or dedicated rock rail options instead.
- Slim, low-profile 6.6-inch step offers a wide, unobtrusive stepping surface for safer entry and exit
- Carbon steel construction with dual-stage E-coating powder finish for improved corrosion resistance
- Vehicle-specific bolt-on fitment uses factory holes and includes all mounting hardware for relatively quick installation
- Solid mounting brackets and 500 lb weight capacity provide confident support when stepping on the board
- Steel construction and powder coat can chip over time from road debris, which may lead to rust if left unrepaired
- Hardware pack includes only the exact fasteners needed so a lost or damaged piece can delay installation
- Some users report alignment/bracket-fit issues on certain trucks requiring bracket adjustments or replacement
Verdict A sleek, performance-minded bolt-on blade running board for Silverado crew cabs that balances a low profile and sturdy support but needs care to prevent finish damage.
4. AUTOSAVER88 6.5" Stainless Steel Running Boards for Chevy Silverado / GMC Sierra Crew Cab
| Fitment | 2019-2026 Chevy Silverado/GMC Sierra 1500 Crew Cab; 2020-2026 Silverado/Sierra 2500HD 3500HD Crew Cab |
|---|---|
| Material | Stainless Steel |
| Step Width | 6.5 inches |
| Load Capacity | 450 Pounds |
These AUTOSAVER88 running boards provide a simple, bolt-on way to add a stable step to compatible Silverado and Sierra Crew Cab trucks. The 6.5-inch wide stainless steel boards with textured black step pads give secure footing in wet or muddy conditions and are rated to support about 450 pounds per side. They install using factory mounting points with no drilling, so a typical installation can be completed in under an hour by someone comfortable with basic hand tools. The one-piece stainless construction and rust-resistant finish mean they focus on durability rather than flashy styling. Buyers should note the boards are a fixed length and some users mention they would prefer slightly longer steps; also a few reviewers reported care needed when tightening the footboard fasteners to avoid stripping small square nuts. For budget-minded Silverado owners this set balances price, fitment, and practical performance but it is not a premium brand with extensive extras like integrated lighting or longer custom lengths.
Best for: Budget-conscious Silverado owners who want a durable, no-frills running board that installs quickly and improves everyday access and truck protection.
Less Ideal for: Buyers seeking integrated lighting, custom-length boards, or a premium branded finish should consider higher-end alternatives.
- Vehicle-specific fit for 2019–2026 Silverado and 2020–2026 2500/3500 Crew Cab for straightforward installation
- 6.5-inch textured step pad provides non-slip footing in varied weather
- Stainless steel construction with rust-resistant finish for lasting durability
- Bolt-on installation using factory holes requires no drilling
- Some users find the boards could be longer for easier step placement
- Square nuts on the footboard can be prone to stripping if over-torqued
Verdict A practical, budget-friendly stainless steel running board for Silverado Crew Cabs that delivers secure footing and easy bolt-on installation without premium extras.
5. COMNOVA 6-Inch Running Boards for 2019-2026 Chevy Silverado 1500 Crew Cab (pair)
| Vehicle Service Type | 2019-2026 Chevy Silverado 1500 Crew Cab; 2020-2026 Silverado/Sierra 2500HD 3500HD Crew Cab |
|---|---|
| Material | Carbon Steel |
| Width | 6 Inches |
| Weight Limit | 500 Pounds |
These COMNOVA running boards are a straightforward, vehicle-specific bolt-on upgrade for Silverado crew-cab owners who want easier entry and a bit of side protection. Each 86-inch bar mounts with four brackets per side and uses a sliding bracket design so you can position the boards forward or back for a clean fit. Made from galvanized carbon steel with anti-slip plastic step pads and a powder-coated finish, they provide a sturdy, weather-resistant stepping surface rated to support up to 500 pounds per board. Installation is typically done by one or two people using factory mounting points and does not require drilling, though reviewers note the instructions can be confusing and some plastic trim covers are awkward to fasten. The result is a durable, OEM-style look that improves access for shorter passengers and resists rust in daily use, while offering solid load support for larger riders. If you want a simple, heavy-duty replacement for dealer boards and accept basic plastic pads rather than softer step surfaces, these perform well for the price.
Best for: Risk-averse mainstream buyers seeking a reliable, factory-style running board that fits the specified Silverado crew-cab models and prioritizes durability and straightforward, bolt-on installation.
Less Ideal for: Buyers wanting premium soft-touch or illuminated step pads, fully hidden-mount systems, or those who prefer an aftermarket style that significantly alters vehicle appearance should consider other options.
- Vehicle-specific bolt-on design for 2019–2026 Silverado Crew Cab ensures precise fitment.
- Galvanized carbon steel construction and powder coat finish resist rust and feel robust underfoot.
- Sliding bracket system allows forward/backward adjustment for cleaner alignment during installation.
- Supports heavy loads (listed up to 500 lbs) and uses eight mounting brackets for strength.
- 6-inch wide step with anti-slip pads gives secure footing for easier entry and exit.
- Instructions and labeling are reported as unclear which can add time to installation.
- Step surface uses hard plastic pads rather than softer, higher-traction materials.
- Plastic trim covers can be difficult to fasten in tight bracket areas.
Verdict A sturdy, no-frills, factory-style running board that bolts on to Silverado crew cabs and delivers durable, rust-resistant stepping at a budget-friendly value.
6. OTHOWE 6.5" Stainless Steel Running Boards for Chevy Silverado Crew Cab
| Fitment | 2019–2026 Silverado/Sierra 1500 Crew Cab; 2020–2026 2500/3500 Crew Cab |
|---|---|
| Material | Stainless Steel |
| Step width | 6.5 Inch |
| Load capacity | 500 Pounds |
| Installation | Bolt-on, no drilling required |
These OTHOWE running boards are a bolt-on side step for 2019–2026 Chevy Silverado and Sierra Crew Cab models with four full-size doors. They mount using the supplied eight brackets and factory threaded frame holes so installation requires no drilling and can be completed with basic tools. The boards are stainless steel with a high-polish finish and anti-slip plastic step inserts, delivering a more premium look and corrosion resistance compared with plain aluminum bars. At 6.5 inches wide the step gives secure foot room for children or older passengers and the slider-style mounting lets you fine-tune fitment fore and aft. Practical benefits include a 450–500 pound stated load capacity per side and easy maintenance for road salt or mud. Limitations to note are the exposed plastic end caps that some owners call cheap and occasional sharp edges during handling, so gloves during install are advisable. Fitment excludes certain 2019 LD and limited models so confirm your truck body style before buying.
Best for: Buyers who want a practical, value-focused upgrade that improves access and appearance on a Silverado Crew Cab without paying for premium-brand accessories.
Less Ideal for: Those seeking fully enclosed, OEM-style integrated running boards or a different Silverado body style that is not listed should look at other options.
- Vehicle-specific bolt-on fit using factory threaded holes for no-drill installation
- Stainless steel construction and polished finish for improved corrosion resistance and appearance
- 6.5-inch wide step with anti-slip inserts for safer, more comfortable entry and exit
- Includes 8 mounting brackets and hardware so the kit is complete for crew cab installation
- Plastic end caps appear low-quality and may not fully cover board ends
- Some exposed edges can be sharp during installation requiring care and gloves
Verdict A budget-conscious, stainless-steel bolt-on running board that adds wide, non-slip steps and a polished look to compatible Silverado Crew Cabs while keeping installation simple.
7. Tyger Auto 3.5" Rider Running Boards for Chevy Silverado / GMC Sierra Crew Cab
| Fitment | 2019–2026 Chevy Silverado / GMC Sierra 1500 (Crew Cab); 2020–2026 2500/3500 HD |
|---|---|
| Material | Carbon Steel |
| Finish | Powder E-Coating textured black |
| Weight Limit | 300 Pounds per side (listed) |
These Tyger Auto Rider running boards give Silverado owners a low-profile, sturdy step that bolts to the rocker panel using the supplied brackets and hardware. Typical use is daily entry and exit assistance plus easier access to cab-mounted cargo; the oval tube design provides a wider 3.5-inch non-slip pad for stable footing. They arrive with brackets, bolts and clear instructions so installation is straightforward with common hand tools and no drilling. The carbon steel tube with a textured E-coat finish resists corrosion and keeps a clean appearance while offering a roughly 300–500 lb per-side capacity depending on listing details. Practical benefits include good ground clearance, a streamlined look that does not stick out far from the body, and long-term durability backed by Tyger for U.S. customers. Limitations are that they are not height-adjustable and, as a welded steel product, may require periodic checks for fastener tightness and touch-up over many winters in salted-road areas. Fitment is vehicle-specific so confirm the crew cab designation before buying.
Best for: Reliability-focused buyers who prioritize a durable, proven running board that installs with basic tools and holds up to daily use on a Silverado crew cab.
Less Ideal for: Buyers who need adjustable-step systems or who prefer an aluminum or composite product specifically marketed for extreme saltwater or off-road corrosion environments.
- Vehicle-specific fit for 2019–2026 Chevy Silverado and compatible GMC Sierra crew cabs for a near-factory appearance
- Wider 3.5-inch oval step pad with textured, non-slip surface for stable entry and exit
- Includes brackets and all mounting hardware so no drilling is required for installation
- Powdered E-coating on carbon steel tubing provides corrosion resistance and a textured finish
- Streamlined profile keeps good ground clearance and a low outward projection
- Not height-adjustable so step position is fixed relative to the rocker panel
- Steel construction can need periodic touch-up and bolt checks in heavy salt or harsh climates
Verdict A reliable, factory-style steel running board that bolts on easily for Silverado crew cabs and prioritizes durability and stable footing.
Choosing the Right Chevrolet Silverado Running Boards: Key Factors to Consider
Vehicle-Specific Fitment
Correct fitment is essential because running boards must align with the Silverado s factory mounting points and door geometry for safe use. A board that is labeled for multiple models without clear Silverado hardware often leads to poor alignment, rubbing, or insecure attachment. When fitment matches the truck, installation is typically faster and does not require drilling or frame alterations. Verify year and cab configuration compatibility to avoid fit surprises and ensure door clearance and step placement are correct.
Material and Corrosion Resistance
Running boards are exposed to water, salt, mud, and road debris, so material choice directly affects longevity. Steel offers strength but needs robust coatings or powdercoat finishes; aluminum resists rust and is lighter, though finishes vary. Look for corrosion-resistant hardware and seals around welded joints. Better surface treatments and stainless fasteners reduce maintenance and corrosion risk in climates with winter road chemicals.
Step Surface and Traction
The stepping area determines how secure each entry feels, especially in wet or muddy conditions. Deep tread patterns, textured surfaces, or rubberized pads provide bite underfoot and help channel water away from the contact surface. Consider how the texture performs with different footwear and whether debris can collect in grooves. Choose a design that balances traction with ease of cleaning and does not trap excess mud or ice.
Ground Clearance and Step Height
A running board should improve access without substantially reducing ground clearance or becoming an obstacle off-road. Low-profile boards sit closer to the body for a sleeker look and usually maintain clearance, while wider platforms offer more step area but may hang lower. If you tow, use rough roads, or plan to lift the truck later, factor in how a chosen board affects approach and departure angles. Proper placement prevents catching on obstacles and preserves the Silverado s intended off-highway behavior.
Load Capacity and Durability
Running boards need to support repeated weight over time without bending or loosening. Load capacity ratings give an idea of how much static weight the board can handle, though installation quality also matters. Assess construction methods like reinforced brackets or boxed rails that resist flex. Durable welds and robust mounting hardware reduce the likelihood of sagging and maintain consistent step feel through heavy use.
Installation and Maintenance
How the boards attach affects both initial installation time and long-term reliability. Systems that use factory threaded holes or bolt-on brackets typically require fewer tools and less time than those needing custom drilling or fitment adjustments. Consider access to mounting points, the need to remove trim, and whether replacement parts or pads are readily available. Also review how easy it is to clean and inspect the boards to keep fasteners tight and finishes intact.
FAQ
Will running boards fit every Chevrolet Silverado model year?
Fitment depends on the specific model year and cab configuration. Many running boards are designed for a defined range of years and require matching the Silverado s cab style. Check the manufacturer s stated compatibility and mounting method to confirm fit before purchasing.
Are aluminum running boards better than steel for a Silverado?
Aluminum resists rust and is lighter, which helps with corrosion resistance and vehicle weight. Steel can be stronger but must have high-quality corrosion protection to avoid rust. The best choice depends on your priorities for longevity, weight, and finish durability.
How difficult is truck running boards installation on a Silverado?
Installation often ranges from straightforward to moderate difficulty depending on the mounting system. Many boards use factory mounting points and bolt-on brackets requiring basic tools. Some systems need additional brackets or trimming, so plan for time and have the right tools available.
Do running boards affect truck ground clearance or off-road use?
Yes, some running boards sit lower than the rocker line and can reduce ground clearance, which may increase the chance of snagging on obstacles. Low-profile designs preserve clearance better, while wide platforms may hang lower. Choose based on how much off-road driving you do.
Can I replace running board padding or traction inserts?
Many running boards include removable pads or inserts that can be replaced when worn. Availability varies by design, so check whether replacement pads or adhesive-backed inserts are offered by the manufacturer or third-party suppliers for your Silverado.
How We Chose the Best Chevrolet Silverado Running Boards
We focused exclusively on running boards that are designed to fit the Chevrolet Silverado and meet practical, real-world needs. Primary evaluation criteria included precise vehicle fitment, material and corrosion resistance, step surface design for traction, load capacity, and the ease of installation using factory or included mounting points. We also considered long-term durability factors such as finish quality and hardware corrosion protection, plus whether the design limits interference with truck doors and ground clearance. Excluded from consideration were universal or vague-fit products without clear Silverado-specific mounting instructions, boards intended solely for specialty vehicles, and options that required extensive body modification. We prioritized products that deliver dependable footing, straightforward attachment, and materials engineered for road salt and frequent use.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize a running board that matches your Chevrolet Silverado s year and cab configuration, uses corrosion-resistant materials, and provides the traction and step height you need. Balance load capacity and ground clearance against the desired appearance and step area. Think about installation complexity and long-term maintenance when deciding. Choosing boards with clear fitment instructions, durable finishes, and replaceable traction pads will deliver safer, more reliable access for everyday use.
Explore More:
- Check out all Chevrolet Silverado parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
