Top 5 Best Puller Sets for Harmonic Balancer/Crankshaft Pulley

The harmonic balancer is a critical device mounted on the end of the crankshaft in your automobile. It ensures the crankshaft operates safely and efficiently, so your internal combustion engine can function normally. Not only that, but it allows mechanical power to be equally distributed to the most crucial electrical components of the vehicle, such as the alternator and air conditioner.

When the time comes for you to replace your harmonic balancer, you’ll need a puller tool to remove it safely. Do not attempt to remove the harmonic balancer without the puller tool because you could end up causing damage to engine components. If that were to happen, it would be a very costly mistake to have to fix.

The harmonic balancer puller is easy to use if you’re an amateur mechanic. You can find them priced affordably online, and often sold as a kit with several other accessories included too.

Our Best Picks

Below are the top 5 best puller sets for harmonic balancers (crankshaft pulleys).

1) OEMTOOLS 25090 Harmonic Balancer Puller Kit

The OEMTOOLS 25090 Harmonic Balancer Puller Kit is designed specifically for use with pressed-on harmonic balancers that have one center retainer bolt. The puller features three jaw puller arms that bite down and grip the harmonic balancer securely. Then you can remove the harmonic balancer without any hassle or risk of damage to other components around it.

This particular harmonic balancer puller kit is compatible with the 1988 or later Model GM 2000 Generation II Cadillac, 2003 or later Chevrolet Trucks, 1990 Chrysler, 1995 or later Fords, and 1995 Mitsubishi Eclipse. You shouldn’t have any trouble operating the puller. Its three jaws are loaded with springs to secure the legs steadily, making it easy to remove and install a harmonic balancer.

You will receive a storage case and instruction manual with the OEMTOOLS 25090 Harmonic Balancer Puller Kit. The instructions are easy to follow for the average person. The kit features a puller body, three jaw pullers, three jaw retaining pins, three wave washers, and four pressure screw adapter rods.

2) ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

Do you perform your own car maintenance? If so, the ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit makes performing certain maintenance tasks a lot easier. You won’t have to struggle when removing a harmonic balancer, steering wheel, crank shaft pulley, or gear pulley from inside your vehicle. This 13-piece puller kit makes everything easier.

The best part is that your other car parts and components won’t be damaged during the removal process. The puller applies even pressure to the parts to ensure they stay safe and secure. The steering wheel puller bits are tempered and hardened for ultimate strength and durability. That means they can withstand long-term repeated use without wearing down quickly.

The kit includes one floating swivel, one solid blow-molded plastic case, two 5/16” x 4” bolts, two 0.25” x 3.0” bolts, three 0.25” x 2.0” bolts, and three 5/16” x 2.0” bolts. You won’t have any trouble identifying the parts because they’re all laid out nicely inside of the case. Just take them out quickly and use as needed.

3) ARES 71002 – Harmonic Balancer Puller Set

The ARES 71002 Harmonic Balancer Puller Set is the perfect puller device for taking out damper pulleys from tight and narrow engine compartments. You won’t have to remove the radiator to do this either. The steel construction of the radiator adds more strength and durability. Its black oxide finish makes it resistant to corrosion as well.

The kit comes with a storage case that includes a three-jaw puller, one forcing screw w/ 3/8” square drive, four forcing rods of varying lengths, and 0.75” hex (wrench or socket usage). All of the tools and parts are organized within the storage case for safekeeping. The puller is compatible with common car brands like Chrysler, Cadillac, Mitsubishi, Oldsmobile and GM. The models include cars, pickup trucks, SUVS and vans.

ARES is a car tool brand that you can trust. They provide all buyers with a Performance Assurance Limited Lifetime Warranty. That means if you have problems with the ARES harmonic balancer puller set, you can request a refund or part replacement for free.

4) HFS (R) 46 Pcs Harmonic Balancer Puller

The HFS (R) 46 Pcs Harmonic Balancer Puller Kit features a whopping 46 different pieces for the harmonic balancer puller. Some of which include the yoke, pulling screws, pressure screw and molded storage case. The puller can be used for a 2 or 3-hole application, thanks to its four yoke slots. The yoke is made heat-treated alloy steel, which adds durability and strength to the device. You’ll also find 30 bolts of all different sizes included as well.

The kit is recommended for more experienced users who have to remove harmonic balancers regularly, such as auto mechanics. If you’re someone with little to no experience at removing harmonic balancers, then you might want to look for a more user-friendly option with fewer parts.

5) OTC 6667 Harmonic Damper Puller

The OTC 6667 Harmonic Damper Puller makes it easy to remove damper pulleys from your vehicle. It is compact enough to fit into narrow engine compartments without having to remove the radiator. There is a 3/8-inch drive for rachets and a 0.75-inch drive for using a socket or wrench. If you’re familiar with the OTC 6267, then you’ll like the OTC 6667 because it is an updated version of it.

Read also:

The puller is compatible with most Mitsubishi and Chrysler models made within the last 20 years. Most auto technicians depend on the OTC 6667 because they know it is a high-quality tool that makes it easier to remove harmonic balancers. You’ll surely feel the same way after you try this puller out for yourself.

You May Also Like

Leave a Reply

Your email address will not be published.