Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you drive a Chevrolet Silverado, the oil filter housing plays a key role in directing oil and sealing the filtration system. Picking the right housing matters because a poor fit or a leaky seal can reduce oil pressure, cause contamination, or lead to costly engine repairs. This guide covers seven shortlisted Chevrolet Silverado oil filter housings chosen for their fitment, sealing, and durability. Below we explain the evaluation criteria and what to watch for so you can pick the right housing for routine maintenance or a targeted repair.
Looking for other parts? See all Chevrolet Silverado parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MAHLE Original GS33747 Engine Oil Filter Housing Seal Kit |  |
| Most Popular A crowd favorite that many people choose with confidence | MITZONE Oil Cooler and Filter Housing Assembly with Gaskets and Filter Insert |  |
| Best Quality Built to a higher standard if you want something more solid | XINLIN Aluminum Engine Oil Filter Housing with Oil Cooler and Sensors |  |
| Best Budget The cheapest option that still gets the job done reliably | FBXINTUM Aluminum Oil Filter Housing with Oil Cooler and Cap |  |
| Most Sold A high-volume bestseller chosen again and again | KLN PERFORMANCE Aluminum Engine Oil Filter Housing with Oil Cooler |  |
| Best Value for Money The sweet spot between price and what you get | Toyota Oil Filter Housing Cap and Drain Plug (15620-31060 / 15643-31050) |  |
| Best Overall The best all-around choice for most situations | MNJWS Aluminum Oil Filter Housing and Cooler Kit for 3.6L Pentastar Engines |  |
1. MAHLE Original GS33747 Engine Oil Filter Housing Seal Kit
| Brand | MAHLE |
|---|---|
| Material | Oe Equivalent |
| Model | GS33747 |
| Manufacturer | MAHLE Original |
The MAHLE GS33747 is a replacement seal kit intended to restore a proper seal at the oil filter housing and stop external oil leaks. It is used when the housing seal has deteriorated or when doing a housing service; technicians install it between the filter housing and engine using the correct torque sequence to avoid distortion. Notable features include OE-equivalent materials and machined exterior fitment that reviewers report matches factory contours. The practical benefit is a direct-fit gasket that addresses common oil leaks and can extend maintenance intervals by reestablishing a solid seal. Installation can be fiddly on some engines and requires careful bolt torque and sometimes partial intake loosening to access the housing, so expect a moderate level of mechanical skill or a shop visit. The kit is a straightforward, quality replacement part for anyone repairing oil leaks where the housing seal is the culprit, but it is not a performance upgrade or a universal fix for unrelated oil system issues.
Best for: A reliability-focused buyer who prioritizes factory-quality replacements to stop persistent oil leaks and prefers parts that match original fit and function.
Less Ideal for: Not ideal for owners seeking performance upgrades, universal repairs, or fixes for unrelated engine oil issues like internal seal failures.
- OE-equivalent materials for factory-quality sealing
- Machined exterior for accurate fit against the housing
- Packaged to ensure correct parts before opening
- Widely reported to stop oil leaks when installed correctly
- Installation can be difficult and may require loosening adjacent components
- Not a solution for leaks originating elsewhere in the oil system
Verdict A factory-quality replacement seal kit that reliably stops oil filter housing leaks when installed with proper care.
2. MITZONE Oil Cooler and Filter Housing Assembly with Gaskets and Filter Insert
| Material | Aluminum |
|---|---|
| Thread Size | M20 x 1.5 |
| Vehicle Service Type | 2011-2015 Chevy Cruz 1.4L L4; 2012-2020 Chevy Sonic 1.4L L4; 2013-2020 Buick Encore 1.4L L4; 2015-2020 Chevy Trax 1.4L L4; 2016 Chevy Cruze Limited 1.4L L4 |
| Manufacturer Part Number | 015-031 |
This MITZONE assembly replaces the oil cooler and filter housing on compatible 1.4L turbo GM engines and ships with the cap, oil cooler, oil filter, and multiple gaskets installed. It is typically used when the factory housing is corroded, leaking, or when upgrading a worn cooler during engine service. Machined aluminum construction and a supplied filter make installation cleaner and faster than sourcing parts separately, and reviewers report straightforward fit and good fitment to the specified engines. The kit’s notable convenience is the included gaskets and preinstalled filter that reduce parts hunting and garage time. Limitations include mixed quality-control reports from some buyers who experienced leaks or missing seals, so careful inspection at installation is advisable. No new fasteners appear included, so you may need to reuse or source hardware. For routine replacement or repair the kit simplifies the job, but verify all seals before first start to avoid troubleshooting after installation.
Best for: Convenience-driven buyers who prioritize a one-package replacement that minimizes parts searching and speeds up a DIY or shop installation.
Less Ideal for: Buyers who need guaranteed OEM-level quality control or those unwilling to inspect and possibly replace seals and fasteners during installation should consider other options.
- Complete kit includes housing, cap, oil cooler, preinstalled filter insert, and multiple gaskets for faster installation.
- Aluminum construction offers corrosion resistance and factory-like appearance.
- Designed to match the specified 1.4L turbo engine fitment for a direct replacement without modification.
- Many buyers report good fit and straightforward installation, saving workshop time.
- Some buyers reported quality-control failures such as leaks or missing O-ring seals on arrival.
- Does not appear to include replacement fasteners, which may require reuse of old hardware or sourcing new bolts.
Verdict A convenient, all-in-one replacement kit that speeds installation for compatible 1.4L turbo GM engines but requires a careful seal inspection due to occasional quality-control issues.
3. XINLIN Aluminum Engine Oil Filter Housing with Oil Cooler and Sensors
| Material | Aluminum |
|---|---|
| Product Grade | Replacement Part |
| Vehicle Service Type | Car, Sports Utility Vehicle, Truck |
| Package Includes | Housing, oil filter, oil cooler, cap, O-rings, gaskets, temp and pressure sensors |
This XINLIN kit replaces the common plastic-aluminum combo oil filter housing with a fully cast aluminum unit that comes complete with the oil cooler, an oil filter, temperature and pressure sensors, and multiple gaskets and O-rings. In practice it is installed where the factory housing sits and functions as the oil filtration and cooling interface, so the included sensors and seals make it a largely drop-in replacement for systems that require them. The all-aluminum construction improves resistance to cracking and leaking compared with plastic housings and simplifies long-term maintenance by using a single robust casting. Buyers should expect a professional or experienced DIY install because the job involves draining oil and coolant and torqueing several fasteners to spec. Fitment and sensor configurations matter for vehicle-specific applications, so confirm compatibility with your Silverado model before ordering. The kit’s comprehensive parts package reduces the need to source extras, but the housing uses a particular oil filter type so keep track of replacement filter compatibility for future oil changes.
Best for: Performance-oriented owners who prioritize long-term durability and want an upgraded, factory-quality replacement that reduces failure risk and supports more aggressive use.
Less Ideal for: Buyers seeking a simple snap-in service part for routine oil changes or those who prefer dealer-supplied parts and diagnostics should consider alternatives.
- Full cast aluminum construction for improved durability over mixed plastic designs
- Includes oil cooler, oil filter, temperature and pressure sensors and necessary gaskets for a more complete replacement
- Ships with multiple O-rings and gaskets to simplify installation and reduce parts hunting
- Appears to fit vehicle-specific applications and reduces risk of repeat failures at aluminum-plastic junctions
- Requires careful verification of sensor count and fitment for specific model years before purchase
- Installation requires draining oil and coolant and correct torqueing so professional installation may be advisable
Verdict A durable full-aluminum replacement housing that upgrades longevity and comes with the needed cooler, sensors, and seals, but verify Silverado model-year fitment and filter compatibility before ordering.
4. FBXINTUM Aluminum Oil Filter Housing with Oil Cooler and Cap
| Material | Aluminum |
|---|---|
| Thread Size | M16 x 1.5 |
| Product Grade | Replacement Part |
| Automotive Fit Type | Vehicle Specific Fit |
This aluminum oil filter housing replaces the factory plastic-style housing and includes an integrated oil cooler and threaded cap for a direct-install replacement on compatible Chevrolet Sonic and Cruze models. In use it mounts in place of the original housing and routes engine oil through the cooler to help lower oil temperature under load. The all-aluminum construction should resist heat and wear better than plastic housings and the product listing states it matches factory fitment for the listed vehicles, so installation is straightforward for a mechanically comfortable DIYer or a shop. Practical benefits are improved durability and potentially better cooling performance, and the included threaded M16 x 1.5 cap makes filter changes familiar. Important limitations: some customers report missing or incorrect gaskets in the package, so you may need to source proper seals separately, and this part is listed for small GM cars rather than full-size trucks so it is not intended for Silverado fitment in this article context.
Best for: Budget-conscious buyers who prioritize a lower-cost metal housing upgrade to replace aging plastic oil filter housings and who are comfortable arranging any missing gaskets themselves.
Less Ideal for: Buyers seeking a part specifically for Chevrolet Silverado or heavy-duty truck engines should choose a housing designed for those vehicles instead.
- All-aluminum construction for improved heat resistance and longevity compared with plastic housings
- Integrated oil cooler helps reduce oil temperature under load
- Designed as a vehicle-specific direct replacement for listed Chevrolet models
- Threaded M16 x 1.5 cap for standard filter access and service
- Some packages may lack the correct gaskets or seals requiring an additional parts purchase
- Fitment and design target small Chevrolet models, not heavy-duty truck applications
Verdict A low-cost all-aluminum replacement housing that improves durability and cooling for listed small GM cars but may require sourcing gaskets and is not meant for Silverado use.
5. KLN PERFORMANCE Aluminum Engine Oil Filter Housing with Oil Cooler
| Brand | KLN PERFORMANCE |
|---|---|
| Material | Aluminum |
| Thread Size | M16 x 1.5 |
| Automotive Fit Type | Vehicle Specific Fit |
This KLN PERFORMANCE aluminum oil filter housing replaces the factory plastic housing with a stronger, corrosion-resistant unit and ships with the oil filter, oil cooler, housing cap, o-rings, gaskets, and temperature and pressure sensors needed to complete the job. It is typically used to eliminate leaks and breakage that develop in original plastic housings and to restore oil cooling function. The aluminum construction reduces the chance of cracking and oil loss compared with plastic housings, and the included hardware makes the unit a mostly complete swap for compatible applications. Several buyers report straightforward installs and durable performance, though a few have experienced leaks around the oil stem that required re-sealing or return. Expect to spend time verifying sensor fit and stem sealing during installation. This is a practical replacement for owners seeking a more durable, ready-to-install housing but not a guaranteed fix for every leak scenario.
Best for: Risk-averse mainstream buyers who prioritize reliability and want a direct, more durable replacement to reduce the chance of oil leaks and repeated repairs.
Less Ideal for: Buyers who need a part specifically matched to Chevrolet Silverado models not listed for this housing or those who prefer dealer-sourced factory parts and warranty coverage.
- Aluminum construction is stronger and less prone to cracking than plastic housings.
- Includes oil filter, cooler, cap, o-rings, gaskets, and sensors for a mostly complete installation.
- Vehicle-specific fit reduces modification during installation for supported applications.
- Replacement for multiple OEM part numbers, simplifying part selection for matching engines.
- Positive user reports of resolved oil/coolant leak issues after upgrade.
- Some users reported persistent leaking around the oil stem that required rework or return.
- Fitment and sensor compatibility may vary by model year and can require verification before install.
Verdict A durable, mostly complete aluminum replacement housing that reduces plastic-housing failures but requires careful fit and stem-seal verification before installation.
6. Toyota Oil Filter Housing Cap and Drain Plug (15620-31060 / 15643-31050)
| Brand | Toyota |
|---|---|
| Material | Stainless Steel |
| Vehicle Service Type | Cars, SUVs |
| Manufacturer Part Number | 15620-31060, 15643-31050 |
This is a factory-quality oil filter housing cap and drain plug sold together as a direct replacement for vehicles that use Toyota part numbers 15620-31060 and 15643-31050. Made from machined stainless steel, the metal housing replaces brittle plastic units and is installed in the same way as the original: torque the housing to the specified value and secure the drain plug to its lower torque. In practice the metal cap resists cracking, provides a more robust seal at the drain port, and simplifies repeat oil changes by standing up to repeated tool use. Buyers should note this listing is the housing and drain plug assembly from Toyota and does not include a filter element. A small number of users reported fitment differences on particular model years, so confirm internal dimensions and part compatibility before installation to avoid circulation or seating issues. Packaging on arrival may be minimal, so inspect for shipping damage before installing.
Best for: Practical optimizers who prioritize long-term value and durability over the lowest upfront cost and want a factory-quality metal replacement to avoid repeat repairs.
Less Ideal for: Owners who need a complete filter kit with the filter element included or those unwilling to verify exact part compatibility with their vehicle before purchase.
- Genuine Toyota factory replacement quality and part numbers match Toyota listings
- Machined stainless steel construction is far less likely to crack than plastic housings
- Includes the drain plug so you get both sealing points replaced together
- Fits the same installation and torque procedure as the factory part, so mechanics can use standard tools
- Not a full filter assembly—filter media is sold separately
- Some buyers reported fitment mismatch on specific years or internal filter-retainer size variations
- Packaging may be minimal which can increase risk of cosmetic damage in transit
Verdict A durable, factory-quality metal housing and drain plug that upgrades plastic housings for better long-term reliability, provided you confirm fitment for your vehicle.
7. MNJWS Aluminum Oil Filter Housing and Cooler Kit for 3.6L Pentastar Engines
| Material | Aluminum |
|---|---|
| Thread Size | M16 x 1.5 |
| Vehicle Service Type | 3.6L Pentastar engine vehicles |
| Manufacturer | MNJWS |
This aluminum oil filter housing and cooler kit replaces the factory plastic assembly on vehicles with the 3.6L Pentastar V6. It is used when the original housing leaks or warps from heat; you remove the old housing, transfer or replace sensors and seals, and bolt this unit in place. The unit is machined from reinforced aluminum to resist heat and corrosion and ships with gaskets, bolts, and an oil filter in many orders so you can complete the job in one visit. Practical benefits include stronger long-term durability compared with the plastic housings, included hardware that simplifies installation, and compatibility with a wide range of Chrysler-built vehicles that use the 3.6L engine. Important limitations: some customers report sensor fittings and the supplied sensor sizes do not always match every vehicle variant so you may need to reuse factory sensors or buy a replacement sensor; a few users noted the included oil filter was low quality and should be swapped for a known brand. If you are installing through a shop, double-check sensor compatibility to avoid extra labor costs.
Best for: Balanced owners who prioritize a durable, longer-lasting repair over sourcing OEM plastic parts and who want a one-stop kit to address persistent oil-housing leaks on 3.6L Pentastar engines.
Less Ideal for: Those who expect guaranteed plug-and-play sensor fitment from the box or who prefer dealer-sourced factory parts with full shop warranty support should consider other options.
- Aluminum construction resists heat and corrosion better than factory plastic housings.
- Comes as a complete kit with gaskets, bolts, and often an oil filter to simplify replacement.
- Direct-replacement design targets known leak points on 3.6L Pentastar engines for straightforward installation.
- Replaces multiple OEM part numbers, making it a versatile aftermarket match for affected vehicles.
- Some supplied sensors or sensor ports may not match every vehicle and require reusing OEM sensors or buying a correct sensor.
- Included oil filter quality is inconsistent so many installers recommend replacing it with a reputable filter brand.
Verdict A cost-effective, stronger aluminum replacement for failing plastic oil filter housings on 3.6L Pentastar engines, but check sensor compatibility before installation.
Choosing the Right Chevrolet Silverado Oil Filter Housing: Key Factors to Consider
Fitment and Compatibility
Accurate fitment is essential because the housing must align with factory mounting bosses, oil passages, and filter threads. A housing that does not match the vehicle-specific geometry can cause stress on bolts, misaligned seals, or interference with nearby components, complicating installation and increasing failure risk. Always verify engine family, production year ranges, and engine codes when matching a housing. Even small differences in locating tabs or bolt spacing will affect how the part seats and seals, so correct compatibility reduces installation time and the likelihood of leaks or mechanical damage.
Sealing Surface and Gasket Quality
The integrity of the sealing surfaces and the included gasket or o-ring determines leak resistance. Smooth, machined mating surfaces and robust gasket materials resist compression set and chemical degradation from oil and heat. Look for housings that use OEM-grade gasket materials or provide a replaceable seal. A poor-quality gasket or damaged mating face often causes oil filter housing leak issues, so prioritize parts with clear guidance on gasket replacement and torque specifications for fasteners.
Material Durability and Heat Resistance
Housings endure constant oil flow, repeated thermal cycles, and under-hood vibration, so material choice affects longevity. Aluminum alloys and high-strength polymers each have tradeoffs in weight, corrosion resistance, and thermal expansion. Consider how the material performs with the engine's operating temperatures and the local climate. Materials that resist cracking and swelling reduce long-term failure risk and help maintain a reliable seal over many heat cycles and service intervals.
Design of Oil Passages and Flow Integrity
The housing must maintain proper oil flow to and from the filter without introducing restrictions or turbulence that could impair filtration or pressure. Internal passage layout, relief valves, and bypass features influence how oil circulates during cold starts and heavy loads. Parts that preserve OEM flow characteristics help maintain stable oil pressure and effective filtration. Avoid designs that significantly alter passage geometry unless you understand the implications for pressure and filtration performance.
Serviceability and Installation Ease
A housing that is easy to service saves time during routine oil changes and lowers the chance of installation errors. Features like captive bolts, accessible filter locations, and clear seal replacement instructions simplify maintenance. Also consider whether the housing allows safe torque access without removing other components. Better serviceability reduces the chance of cross-threading, overtightening, or improper gasket seating during installation.
Corrosion Resistance and Finish
Exposure to road salt, moisture, and engine fluids makes corrosion resistance an important factor. Protective coatings, anodizing, or corrosion-resistant materials extend the useful life of the housing and maintain sealing surface integrity. A durable finish also reduces adhesion of grime and makes inspections easier. Prioritizing corrosion-resistant options reduces the chances of housing cracking or base material degradation over time.
FAQ
What are common symptoms of a failing oil filter housing on a Chevrolet Silverado?
Common signs often include visible oil leaks near the filter area, a drop in oil pressure, or unusual oil residue under the engine. You may also notice oil on nearby components after driving. These symptoms usually indicate a sealing issue, a cracked housing, or a failing gasket.
Can I replace the oil filter housing myself?
Many owners with basic mechanical skills can replace the housing, but it usually requires proper tools, correct torque specifications, and attention to gasket installation. If you are unsure about fitment or torque procedures, a professional technician can ensure correct sealing and prevent leaks.
How often should the oil filter housing gasket be replaced?
Gaskets are typically replaced whenever the housing is removed for service, or if there are signs of leakage or material degradation. Regular inspection at oil changes helps catch early gasket deterioration before it leads to significant leakage.
What causes an oil filter housing to crack?
Cracking can result from thermal cycling, impact damage, overtightening of fasteners, or material fatigue, especially in plastic housings. Corrosion and stress concentrations around mounting holes also increase cracking risk. Choosing a durable material and following proper torque specs reduces the likelihood of cracking.
How do I find the correct part number for my Chevrolet Silverado oil filter housing?
Locate your vehicle identification details, such as the model year and engine code, and reference manufacturer parts catalogs or service documentation. Exact fitment information is tied to the engine variant, so matching those specifics will help identify the correct part number.
How We Chose the Best Chevrolet Silverado Oil Filter Housing
We focused on parts specifically intended for Chevrolet Silverado engines and evaluated candidates across four to six practical dimensions that matter during installation and long-term use. Key criteria included precise fitment to factory mounting points, compatibility with the original oil filter and oil passages, and the quality of sealing surfaces and gaskets. We also examined material durability under heat and vibration, corrosion resistance, and ease of servicing such as access to the filter and drain features. We excluded components that were universal or required major modification, aftermarket housings lacking clear fitment data, and any options that altered oil flow paths beyond OEM specifications. The resulting shortlist reflects parts that meet strict compatibility filters and demonstrate reliable sealing, durable construction, and straightforward installability for Silverado owners and technicians.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Chevrolet Silverado oil filter housing, prioritize precise fitment, reliable sealing, and durable materials. These factors directly affect leak resistance, oil flow integrity, and long-term reliability. Weigh tradeoffs between material types and serviceability based on how you use the truck and how often you perform maintenance. Focus on housings that make gasket replacement straightforward and maintain OEM oil passage geometry to minimize future issues.
Explore More:
- Check out all Chevrolet Silverado parts & accessories
- Explore Engine
- Browse all Auto Parts
