Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Choosing the right mud flaps for your Dodge Charger matters because the wrong fit or weak material can allow road debris and moisture to damage paint and trim. The right set reduces spray, minimizes stone chips, and keeps wheel wells cleaner in wet or gravel conditions. This guide shortlists the top options specifically for the Charger, focusing on fitment, material quality, and mounting strength. Below are our top picks and the evaluation criteria used to narrow the field.
Looking for other parts? See all Dodge Charger parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | KEWISAUTO Mud Flaps Splash Guards for Dodge Challenger (4‑Piece Kit) |  |
| Most Popular A crowd favorite that many people choose with confidence | A-Premium Universal 4-Piece Mud Flaps Splash Guards with Hardware |  |
| Best Quality Built to a higher standard if you want something more solid | Husky Liners MudDog Universal 12" Front Mud Flaps (55001) |  |
| Best Budget The cheapest option that still gets the job done reliably | Red Hound Auto Premium Molded Mud Guards 4pc Set for Dodge Charger (2015–2020) |  |
| Most Sold A high-volume bestseller chosen again and again | RILONH Angled Spring-Loaded Mud Flap Hanger Bracket, 1-1/8" Bolt Spacing, Pair |  |
| Best Value for Money The sweet spot between price and what you get | KIWI MASTER Mud Flaps Splash Guards for Dodge Challenger (Front & Rear) |  |
| Best Overall The best all-around choice for most situations | CAT Heavy-Duty Rubber Mud Flaps with Nighttime Reflectors |  |
1. KEWISAUTO Mud Flaps Splash Guards for Dodge Challenger (4‑Piece Kit)
| Fitment | Dodge Challenger 2015-2023 (without fender flares) |
|---|---|
| Pieces included | 4 mud flaps with mount hardware |
| Material | Injection-molded high-density polypropylene (HDPE) |
| Installation type | Screw-In |
These KEWISAUTO mud flaps are a vehicle-specific splash guard kit designed to mount to Dodge Challenger models that do not have factory fender flares. The set includes four pre-shaped flaps and mounting hardware and installs with screws and clips; reviewers note the rear pieces may require drilling for the lower holes and that the front pieces can be fitted without removing wheels. Constructed from injection-molded high-density polypropylene with a powder-coated finish on the mounting hardware, the flaps are rigid enough to deflect stones and road spray and maintain their shape over time. Fit is generally good for the specified Challengers, and the contoured profile preserves the car’s look while protecting paint and rocker panels. Expect some basic trimming or careful test-fitting on certain years and follow the instructions for retaining existing plastic rivets where recommended. These are a practical, budget-friendly way to add long-term protection, though installation can take moderate DIY skill and the plastic construction is not as heavy-duty as metal alternatives.
Best for: Reliability-focused buyers who prioritize protecting the Challenger’s paint and rockers with a straightforward, vehicle-specific aftermarket part and are comfortable doing moderate DIY installation.
Less Ideal for: Drivers seeking a heavy-duty metal guard or a no-modification OEM replacement should consider other options or factory-sourced parts.
- Vehicle-specific shape for Dodge Challenger without fender flares for a closer fit
- Injection-molded HDPE construction resists elements and keeps shape
- Includes mounting hardware for a complete install
- Extended flap design increases protection for rocker panels and paint
- May require drilling and occasional trimming for perfect alignment on some years
- Plastic material is less impact-resistant than metal or reinforced options
Verdict A cost-effective, vehicle-specific mud flap kit that reliably protects a Challenger’s lower body if you accept basic DIY installation and plastic construction.
2. A-Premium Universal 4-Piece Mud Flaps Splash Guards with Hardware
| Pieces included | 4 Pcs (1 set) |
|---|---|
| Installation type | Screw-In |
| Material | PP+TPE |
| Finish type | Powder Coated |
These A-Premium mud flaps are a universal four-piece kit that adds splash protection to front and rear wheel openings on a Dodge Charger when trimmed and mounted. They install with supplied screw fixings and buckles after drilling pilot holes, so a basic DIY install is possible in a garage or driveway. The flaps use a PP+TPE blend with a powder-coated textured look that resists road grime and helps hide scratches. Included hardware and a one-set package make this convenient for drivers who want a quick cosmetic and functional upgrade without buying model-specific parts. Expect reasonable durability for everyday street use and improved prevention of mud and stone chips on lower body panels. Limitations are that the kit is universal rather than Charger-specific so some trimming or additional fasteners may be required for an exact fit, and the material can stiffen and become more crack-prone in very cold climates according to user reports.
Best for: Convenience-driven buyers who want an affordable, ready-to-install splash-guard solution to reduce road spray and protect lower bodywork with minimal shopping or parts matching.
Less Ideal for: Drivers seeking a factory-quality, vehicle-specific mud flap with guaranteed exact fit or those planning heavy off-road or prolonged dirt-road use should consider model-specific or heavy-duty alternatives.
- Complete four-piece kit with screws and buckles for a single purchase and install
- Universal design can fit a wide range of wheel openings after minor trimming or adjustment
- PP+TPE construction and textured powder-coated finish hide wear and resist road grime
- Screw-in installation is doable with basic tools for a convenient DIY upgrade
- Universal fit means not a perfect bolt-on for Dodge Charger and may require trimming or extra fasteners
- Some users report material can become stiffer and crack in very cold weather
Verdict A convenient, budget-friendly universal mud flap kit that improves splash protection on a Dodge Charger but may need trimming or extra fasteners for a precise fit.
3. Husky Liners MudDog Universal 12" Front Mud Flaps (55001)
| Auto Part Position | Front |
|---|---|
| Installation Type | Screw-In |
| Finish Type | Polished |
| Automotive Fit Type | Vehicle Specific Fit |
The Husky Liners MudDog 12" front mud flaps are heavy-duty rubber guards intended to block mud, stones and spray from the front wheel wells. They mount with a simple screw-in installation and include bottom weights so the flaps settle and resist flapping at speed. In use they provide wide tread coverage and a firmer barrier than thin factory splash guards, which helps protect painted surfaces and underbody components during spirited driving or on rough roads. The rubber construction is impact resistant and the available stainless or matte black accent gives a clean, near-factory look. Installation is straightforward for a competent DIYer but the supplied self-tapping fasteners have prompted some owners to replace them with stronger bolts and locking nuts for long-term security. These are universal flaps so trimming or additional brackets may be required for a tight, Charger-specific fit. For drivers who prioritize robust protection and road manners, MudDog delivers durable performance with the minor caveat that hardware upgrades can improve longevity.
Best for: Performance-oriented drivers who want heavy-duty front protection and reduced flap movement during high-speed driving and aggressive road use.
Less Ideal for: Buyers seeking a purpose-built, vehicle-specific Charger fit without modification should consider Charger-specific splash guards or custom-fit options instead.
- Robust, impact-resistant 12-inch rubber provides broad coverage against debris and spray
- Weighted bottom reduces flapping at highway speeds for improved stability
- Simple screw-in installation that most DIYers can complete quickly
- Attractive finish options (stainless or matte black) that blend with factory styling
- Universal design may require trimming or extra brackets to fit a Dodge Charger precisely
- Included self-tapping hardware is lightweight and some users prefer stronger fasteners
Verdict A rugged, weighted 12-inch mud flap that gives performance-focused drivers reliable front-end protection, though a Charger may need trimming or stronger fasteners for a perfect fit.
4. Red Hound Auto Premium Molded Mud Guards 4pc Set for Dodge Charger (2015–2020)
| Vehicle fit | 2015-2020 Compatible with Dodge Charger |
|---|---|
| Set | 4-piece (front and rear) |
| Installation | Screw-In with included hardware |
| Finish | Powder Coated |
These Red Hound Auto mud guards are a custom-molded four-piece kit that attaches to the Charger’s front and rear wheel openings to block mud, water, and debris from splashing onto the body. Designed for a vehicle-specific fit, the guards include mounting hardware and are installed with screw-in fasteners following the included instructions. The textured, powder-coated finish resists fading and helps hide wear, while the thick polymer construction stands up better than thin aftermarket plastic. In practice they give broad coverage without significantly affecting wheel clearance or turning. Installation can require some patience and occasional trimming or drilling for perfect alignment on certain Chargers, but most users report a straightforward install using the supplied parts. These are a budget-oriented alternative to dealer parts: they deliver strong protection and a factory-contoured look, though fitment is not always perfect and a small number of buyers report rough edges or the need for minor adjustments.
Best for: Cost-conscious Charger owners who want solid splash and rock protection with a factory-style look without paying dealer prices.
Less Ideal for: Buyers seeking an exact dealer-fit replacement with guaranteed perfect alignment or those unwilling to make small adjustments during installation.
- Vehicle-specific molding for a near-factory contour on Dodge Charger bodylines
- Thick, heavy-duty polymer construction offers better impact and abrasion resistance than thin plastics
- Includes mounting hardware and instructions for a complete front and rear installation
- Textured powder-coated finish resists fading and hides road grime
- Fit may require minor trimming or additional drilling on some Chargers to achieve a perfect flush install
- Some units have shipped with rough or sharp edges that need sanding before mounting
Verdict A budget-friendly, molded mud guard kit that gives Dodge Charger owners strong protection and a factory-contoured look if you accept possible minor fit adjustments.
5. RILONH Angled Spring-Loaded Mud Flap Hanger Bracket, 1-1/8" Bolt Spacing, Pair
| Bolt Spacing | 1-1/8" |
|---|---|
| Length | 30.27 inches |
| Unit Count | 2 |
| Finish Type | Painted |
These RILONH angled mud flap hanger brackets are spring-loaded hangers designed to secure heavy mud flaps to a vehicle using a 1-1/8" vertical bolt spacing pattern. They install with the provided nuts and hardware and use thick spring coils to absorb road shocks while keeping the flap aligned. Construction is described as heavy-duty steel with stainless components and a painted finish, and the included DOT-C2 reflective tape increases nighttime visibility. In practice they are straightforward to mount where the vehicle has matching bolt spacing and studs, and the spring action helps prevent rigid impacts from transferring to the mounting points. Some buyers report durable long-term performance while a few noted missing hardware or early failures, so check fasteners and inspect for corrosion over time. These hangers are best when you need a robust, visible mounting solution but be sure your Charger has compatible bolt spacing or that you can adapt the mounting location.
Best for: Risk-averse mainstream buyers who prioritize a visible, durable mounting solution and want simple, hardware-included parts that reduce vibration-related wear.
Less Ideal for: Buyers who cannot match the 1-1/8" bolt spacing on their vehicle or who prefer a purpose-built mud flap system designed specifically for Dodge Charger fitment should look elsewhere.
- Spring-loaded design absorbs road shocks and helps keep mud flap alignment
- DOT-C2 reflective tape improves nighttime visibility
- Constructed from thickened steel and stainless components for heavier-duty use
- Includes mounting nuts and hardware for installation
- Specified bolt spacing is 1-1/8" so it will not fit vehicles without matching bolt pattern
- Some customers reported missing hardware or early failures in isolated cases
Verdict A heavy-duty, spring-loaded hanger with reflective tape that works if your Charger can accept the 1-1/8" bolt spacing but is not a universal, vehicle-specific kit.
6. KIWI MASTER Mud Flaps Splash Guards for Dodge Challenger (Front & Rear)
| Vehicle Service Type | 2015-2023 Dodge Challenger |
|---|---|
| Auto Part Position | Front, Rear |
| Installation Type | Screw-In |
| Finish Type | Powder Coated |
These KIWI MASTER splash guards are molded, heavy-duty ABS mud flaps intended as vehicle-specific replacements that attach with screws and included hardware. They are used to add tire coverage behind the front and rear wheels to reduce mud, water, and road debris hitting the rocker panels and lower body. The flaps are powder coated for a matte finish and come with mounting hardware for a screw-in installation; many buyers report the fit is close to factory and the material resists cracking in temperature extremes. Practical benefits include solid protection for painted surfaces, a durable feel compared with thin aftermarket pieces, and relatively straightforward installation if you reuse existing fasteners. Limitations to note are that the supplied hardware can be fiddly and may require drilling or supplemental fasteners for perfect alignment, and the design and color tone are more utilitarian than decorative. Fitment is vehicle specific so confirm model-year compatibility before buying.
Best for: Practical optimizers looking for a durable, no-frills way to protect lower bodywork from road spray and rock chips while minimizing long-term maintenance.
Less Ideal for: Buyers seeking a decorative or show-quality trim upgrade or those who prefer a purely adhesive, tool-free installation should consider other options.
- Thick ABS construction gives more impact and weather resistance than thin splash guards
- Vehicle-specific molded shape provides close fit and good tire coverage
- Powder-coated finish resists fading and looks factory-matched
- Includes mounting hardware for a mostly screw-in installation
- Included hardware may be inadequate or require drilling and extra fasteners for secure mounting
- Design prioritizes function over aesthetics so appearance is plain
Verdict A tough, vehicle-specific set of mud flaps that offers strong protection and value but may need extra fasteners for perfect installation.
7. CAT Heavy-Duty Rubber Mud Flaps with Nighttime Reflectors
| Brand | CAT |
|---|---|
| Installation Type | Screw-In |
| Auto Part Position | Front, Rear |
| Automotive Fit Type | Universal Fit |
| Special Features | Hardware Screws Included, Mirror Reflectors for Increased Nighttime Visibility |
These CAT mud flaps are a universal-style splash guard made from thick, flexible rubber intended to shield the lower body and wheel wells from rocks, mud, and road spray. They come with screws for screw-in installation and small mirror reflectors to improve nighttime visibility. Typical use is DIY mounting behind front or rear wheels to reduce debris damage and keep a vehicle cleaner on wet or rough roads. The heavy rubber construction makes them durable against impacts and they are easy to trim if you need a custom fit. Expect to drill mounting holes and do some fitting work for a tight installation on a Dodge Charger since the flaps are not vehicle-specific; some owners report shorter supplied screws and extra drilling may be required. The reflectors are a useful safety touch, but the universal fit approach means extra time routing, trimming, and finding longer fasteners for secure attachment on certain wheel wells.
Best for: Balanced buyers who want a durable, all-weather protection upgrade for their Dodge Charger and are willing to do light DIY fitting for a universal product.
Less Ideal for: Drivers seeking a direct bolt-on, vehicle-specific Fender solution or a fully pre-drilled Charger-specific kit should look for model-tailored alternatives.
- Thick, flexible rubber resists impacts and holds up in mud and snow
- Includes mounting hardware and is designed for DIY installation
- Built-in reflectors increase nighttime visibility behind the vehicle
- Universal shape can be trimmed to match custom wheel well shapes
- Universal fit requires drilling and fitting which can be time consuming for some installations
- Included screws may be too short for secure attachment on some vehicles
Verdict Sturdy, reflector-equipped universal mud flaps that give strong protection if you accept extra drilling and fitting for a proper Dodge Charger installation.
Choosing the Right Dodge Charger Mud Flaps: Key Factors to Consider
Fit and Compatibility
A proper fit ensures the mud flaps sit close to the wheel well without rubbing on tires while providing full coverage where needed. Poorly fitting flaps can flutter, wear prematurely, or fail to block rocks and spray effectively.
Look for designs tailored to the Charger’s wheel arch shape and available mounting points. Fit affects both appearance and function, so consider whether the product includes templates, pre-drilled holes, or vehicle-specific brackets to simplify alignment and reduce adjustment.
Material Durability
Materials determine how well mud flaps withstand road salts, UV exposure, and temperature swings. Heavy-duty rubber or flexible thermoplastic tends to resist cracking and maintain shape, while thin plastics can warp or shatter under impact.
Assess thickness, tensile strength, and whether the material has reinforcements at stress points. Durable materials extend service life and require less frequent replacement, especially if you drive on rough roads or in severe weather conditions.
Mounting System and Hardware
A robust mounting system keeps flaps secure at highway speeds and over potholes. Look for stainless steel or corrosion-resistant hardware, reinforced mounting holes, and options that use existing factory points to avoid drilling where possible.
Well-designed hardware reduces vibration and prevents premature loosening. Consider whether the kit includes washers, backing plates, or brackets that distribute load and protect panel edges from damage.
Coverage and Shape
Coverage area influences how much spray and debris the flap blocks. Wider, contoured flaps protect lower body panels and reduce backsplash, while narrower designs offer less protection but may look less obtrusive.
The shape should follow the wheel well profile for full protection without contacting the tire during suspension travel. Evaluate whether the design balances aesthetic integration with practical shielding for typical road hazards.
Noise and Vibration Control
Flaps that vibrate or slap at speed can be annoying and may indicate poor attachment. Look for features like flexible edges, dampening materials, or mounting designs that minimize movement.
Reducing noise enhances comfort and signals a more secure installation. Good vibration control also lessens fatigue on mounting points and the flap itself, improving longevity.
Maintenance and Replacement Ease
Consider how easy it is to clean, inspect, and replace the mud flaps. Removable designs or ones that use common fasteners make seasonal maintenance simpler and reduce the time needed for repairs.
Kits that provide clear instructions, accessible fasteners, and replaceable components help keep the system functional with minimal tools. Maintenance-friendly options save time and prevent small issues from becoming larger problems.
FAQ
Do I need Charger-specific mud flaps or will universal ones work?
Universal mud flaps can provide basic protection, but Charger-specific options are usually shaped to match the wheel arch and mounting points. That improved fit often means less trimming, fewer gaps for spray, and a cleaner installation.
How hard is it to install mud guards on a Dodge Charger?
Installation difficulty varies by kit. Some Charger-fit kits use existing factory holes and only require basic tools, while others may need minimal drilling or brackets. Most installations can be done in a couple of hours by someone comfortable with simple automotive work.
What material is best for long-term use on a Charger?
Flexible heavy-duty rubber or reinforced thermoplastic typically offers the best balance of impact resistance and flexibility. These materials resist cracking in cold weather while maintaining shape under heat and road stress, making them suited for long-term exposure.
Will mud flaps affect fuel economy or sound levels?
Properly fitted mud flaps have negligible impact on fuel economy. However, poorly attached or overlarge flaps can create extra drag or flap at speed, which may slightly increase noise and wind resistance. Choosing the correct size and mounting securely minimizes these effects.
How do I know when to replace my mud flaps?
Replace flaps that show significant cracking, tears, or persistent deformation that brings them into contact with the tire. Also consider replacement if mounting points are corroded or hardware no longer secures the flap reliably, as these issues reduce protection and can cause damage.
How We Chose the Best Dodge Charger Mud Flaps
We prioritized products that deliver secure fitment to the Dodge Charger and use materials suited to road exposure. Key evaluation criteria included fit accuracy to Charger wheel wells, material composition and resistance to cracking or warping, mounting hardware quality and ease of installation, and the coverage area provided to block spray and debris. We also considered long-term durability under temperature changes and exposure to road chemicals. Items were excluded if they only claimed universal compatibility without Charger-specific fitment details, if they lacked robust mounting systems, or if materials were prone to rapid degradation. The final list favors options with clear installation guidance, reliable fasteners, and construction designed to withstand regular road use.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize fit and durable materials when selecting mud flaps for a Dodge Charger. A model-specific design with corrosion-resistant hardware and ample coverage will protect paint and underbody components more effectively than a generic approach. Balance coverage, appearance, and noise control based on your driving conditions to get the best long-term protection. Regular inspection and secure mounting are key to maintaining performance. Focus on solutions that offer clear installation guidance and replaceable parts to keep maintenance simple and extend the service life of the mud flaps.
Explore More:
- Check out all Dodge Charger parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
