Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want more ground clearance, better wheel fitment, or a taller stance for a Kia Soul, the right lift kit makes a noticeable difference in daily driving and light off-pavement use. Choosing the correct kit affects handling, comfort, and the ability to fit larger tires without rubbing.This guide covers five shortlisted lift kits selected for this vehicle type and explains the evaluation criteria we used. The following sections outline what mattered most during selection and what to expect from different lift approaches, leading into our top picks.
Looking for other parts? See all Kia Soul parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Tema4x4 Complete 20mm Lift Kit for Kia Soul (2013–2019) |  |
| Best Quality Built to a higher standard if you want something more solid | Tema4x4 Complete 20mm Lift Kit for Kia Soul (2013–2019) | |
| Best budget The cheapest option that still gets the job done reliably | DEALPARTS 1.2 in Front Strut Spacers Leveling Lift Kit for Kia |  |
| Highest Rated A top-rated pick with lots of positive feedback | Tema4x4 30mm Complete Lift Kit for Kia Soul / Pride / Venga (Rear PU Coil & Strut Spacers) |  |
| Best Seller A high-volume bestseller chosen again and again | DEALPARTS 1.2-inch Leveling Lift Kit for Kia Soul (2013-2019) |  |
1. Tema4x4 Complete 20mm Lift Kit for Kia Soul (2013–2019)
| Included Components | Front strut spacers, rear coil spacers, rear shock mount spacers, fitting kit |
|---|---|
| Lift Height | 20mm |
| Automotive Fit Type | Vehicle Specific Fit |
| Material Type | Polyurethane (PU) |
This Tema4x4 lift kit uses polyurethane spacers for a simple, vehicle-specific 20mm ride height increase on Kia Soul models. The kit includes front strut spacers, rear coil spacers and rear shock mount spacers plus a fitting kit so it can be installed during a strut or spring service or as a standalone upgrade. In practice it increases clearance over curbs and rough roads, helps accommodate slightly larger wheels and tires, and gives the Soul a more lifted stance without major suspension changes. Polyurethane construction promises durability and resistance to road wear but it does not replace heavier-duty components for serious off-road use. Installation is straightforward for experienced DIYers and some buyers report completing the job in a couple of hours, though correct fitment depends on confirming vehicle year and submodel. Expect a modest change in ride feel compared with stock suspension and plan for an alignment after installation.
Best for: A balanced all-round buyer who wants a simple, factory-friendly way to raise a Kia Soul’s clearance and appearance without major suspension modification.
Less Ideal for: Drivers seeking substantial off-road lift, heavy-load capability, or dramatic tire clearance should choose a more robust suspension system or longer-travel lift kit.
- Vehicle-specific kit that targets Kia Soul fitment for easier installation
- Includes necessary spacers for front and rear plus basic fitting hardware
- Polyurethane spacers offer durability and resistance to road wear
- Modest 20mm lift improves clearance and allows slightly larger tires without major suspension changes
- Provides only a small lift suitable for light clearance and styling changes rather than heavy off-road use
- Requires confirmation of exact year/submodel for correct compatibility
Verdict: An easy, vehicle-specific 20mm lift that improves clearance and stance for Kia Soul owners with minimal modification.
2. Tema4x4 Complete 20mm Lift Kit for Kia Soul (2013–2019)
| Included Components | Front strut spacers, rear coil spacers, rear shock mount spacers, fitting kit |
|---|---|
| Lift Height | 20mm |
| Material Type | Polyurethane (PU) |
| Automotive Fit Type | Vehicle Specific Fit |
| Manufacturer Warranty Description | 2 Year Manufacturer Warranty |
This Tema4x4 complete lift kit raises a Kia Soul by 20mm using polyurethane front strut spacers, rear coil spacers and rear shock mount spacers plus a fitting kit for installation. It is intended for enthusiasts who want a modest, factory-friendly lift to increase ground clearance, reduce curb-scraping and create room for slightly larger wheels and tires while keeping the stock suspension geometry. The kit is lightweight and uses durable PU components that resist corrosion and are easy to install for someone comfortable with suspension work; several owners report completing installation in a few hours with basic tools. Because the lift is a spacer-style solution, it preserves the factory springs and shocks but does not change damping or ride height dramatically, so it will not provide heavy-duty off-road articulation or major load-carrying improvements. Fitment appears vehicle-specific so confirm compatibility before ordering and expect alignment after installation if ride height or tracking changes.
Best for: Performance-oriented buyers who want a modest, factory-friendly lift for their Kia Soul to improve clearance and achieve a more aggressive stance without replacing the entire suspension.
Less Ideal for: Drivers planning heavy off-road use, substantial lift, or improved load-carrying capability should choose a full suspension upgrade instead.
- Vehicle-specific kit with parts for front and rear to provide an even 20mm lift
- Polyurethane spacers resist corrosion and are more durable than basic plastic
- Includes fitting hardware to simplify installation for experienced DIYers
- Small lift improves clearance and allows modestly larger wheels without replacing springs
- Spacer-style lift does not improve suspension travel or damping for serious off-road use
- Fitment reports are mixed so compatibility should be double-checked before purchase
Verdict: A compact, vehicle-specific 20mm spacer lift that improves clearance and stance while keeping the factory suspension components.
3. DEALPARTS 1.2 in Front Strut Spacers Leveling Lift Kit for Kia
| Compatibility | Multiple Kia models including Soul (II and III) and Sportage |
|---|---|
| Position | Front |
| Material Type | Polyurethane (PU) |
| Included Components | 2x front strut spacers and fitting kit |
This DEALPARTS lift kit is a simple front strut spacer set intended to add roughly 1.2 inches of lift to the front of compatible Kia vehicles. Installation involves replacing the top of the front strut with the included polyurethane spacers and using the supplied fitting hardware, so it is commonly fitted by DIYers or small shops to gain extra clearance and achieve a more level stance. The kit’s high-density polyurethane construction resists compression better than low-grade foam and should hold height under normal street and light off-road use. Because it only lifts the strut tower, it preserves factory springs and dampers so ride quality remains close to stock, but it does not address alignment, steering geometry, or rear ride height. That makes it an inexpensive, low-effort way to run slightly larger tires or clear minor obstacles, but drivers seeking full suspension tuning, increased wheel travel, or heavy off-road use will need a more comprehensive kit or upgraded shocks.
Best for: Budget-conscious Kia owners looking to modestly raise front ride height and fit slightly larger wheels without replacing the suspension or investing in an expensive lift conversion.
Less Ideal for: Drivers who plan serious off-road driving, need increased wheel travel, or want a full suspension lift with matched shocks and rear height adjustments should choose a more complete lift system.
- Adds about 1.2 inches of front ride height for improved ground clearance and a more level stance
- High-density polyurethane construction designed to resist compression and last longer than low-end spacers
- Includes fitting kit so basic installation is possible for competent DIYers or local shops
- Lift only affects the front strut towers and does not modify springs, shocks, or rear ride height
- Does not correct alignment or steering geometry so a post-install alignment may be required for best handling
Verdict: A low-cost, easy-to-install front strut spacer kit that gives the Kia Soul a modest 1.2-inch lift but is best for light-duty use rather than full suspension upgrades.
4. Tema4x4 30mm Complete Lift Kit for Kia Soul / Pride / Venga (Rear PU Coil & Strut Spacers)
| Brand Name | Tema4x4 |
|---|---|
| Included Components | coil spacers,strut spacers |
| Material Type | Polyurethane (PU) |
| Maximum Lifting Height | 1 Inches |
| Auto Part Position | Rear |
This Tema4x4 lift kit uses polyurethane coil and strut spacers to add roughly 30 mm (about 1 inch) of rear lift to compatible Kia Soul, Pride and Venga models. It installs between the spring/strut and mounting points to increase ground clearance for light off-road use, higher curbs, and a slightly more aggressive stance while preserving the factory suspension components. The PU construction is more durable than basic plastic spacers and resists weathering, and the kit ships as a complete rear set for a straightforward bolt-on fit when matched to the correct model. Practical benefits include easier clearance for larger wheels and improved approach clearance on rough roads without a full suspension overhaul. Limitations are that this is a modest body lift intended for light-duty use only, it does not alter suspension travel or damping, and professional alignment may be needed after installation to avoid uneven tire wear.
Best for: Reliability-focused buyers who want a conservative, factory-friendly way to gain modest ground clearance and improved curb/approach clearance without overhauling the suspension.
Less Ideal for: Drivers seeking significant lift, heavy off-road capability, or changes to ride quality and suspension dynamics should look at full suspension kits instead.
- Adds about 30 mm (1 inch) of rear clearance for better approach and curb clearance
- Polyurethane spacers resist weathering and are more durable than inexpensive plastics
- Complete rear kit includes coil and strut spacers for a coordinated install
- Bolt-on design enables relatively quick installation without replacing springs or shocks
- Provides only a small lift and is not suitable for heavy-duty off-road use
- Does not change suspension damping or travel so handling characteristics remain largely unchanged
Verdict: A durable, bolt-on rear spacer kit that reliably adds about an inch of clearance for Kia Soul owners who want a modest, factory-friendly lift.
5. DEALPARTS 1.2-inch Leveling Lift Kit for Kia Soul (2013-2019)
| Compatibility | Kia Soul 2013-2019 |
|---|---|
| Maximum Lifting Height | 1.2 Inches |
| Material Type | Polyurethane (PU) |
This DEALPARTS leveling kit raises a Kia Soul by 1.2 inches using two strut spacers, two coil spacers and two shock extenders plus a fitting kit for installation. It is intended to add modest ground clearance, improve stance, and allow slightly larger wheel and tire combinations without major suspension changes. The components are molded from high-density polyurethane, which resists deformation and should last longer than softer plastics. Installation is typically bolt-on at the struts and coils and can be handled by a competent DIYer with basic tools or by a shop. Notable benefits are the simple hardware kit and the matched spacers and extenders so you do not need separate parts to maintain proper ride geometry. Limitations: the lift is modest at 1.2 inches so it will not provide serious off-road capability, and polyurethane can transmit a bit more road buzz than a factory rubber isolator. Also this kit is specific to the Kia Soul 2013–2019 and does not address any other suspension modifications.
Best for: Practical, risk-averse buyers who want a modest, factory-style lift for a Kia Soul 2013–2019 to improve clearance and fit slightly larger tires without major suspension changes.
Less Ideal for: Drivers seeking significant off-road capability or large lifts should look at more substantial suspension systems or professional coilover solutions.
- Adds a consistent 1.2-inch lift to improve ground clearance and stance
- Includes matched strut and coil spacers plus shock extenders and fitting kit for a complete install
- Made from high-density polyurethane for durability and resistance to permanent compression
- Lift is small and not suitable for serious off-road use
- Polyurethane components may increase road noise or transmit more vibration than factory rubber
Verdict: A modest, durable polyurethane leveling kit that safely raises a Kia Soul 2013–2019 by 1.2 inches for improved clearance and fitment without major suspension changes.
Choosing the Right Kia Soul Lift Kit: Key Factors to Consider
Lift Height
Lift height determines how much additional ground clearance and visual stance you gain. Small lifts generally preserve near-stock handling and suspension travel, while larger lifts increase the risk of altered steering geometry, driveline stress, and the need for additional components.
Consider what you need the extra height for. If it is mainly for tire fitment or mild obstacles, a modest lift is usually preferable. If clearance for larger tires or significant off-pavement capability is required, expect tradeoffs in ride and the potential need for alignment and driveline adjustments.
Fitment and Compatibility
Vehicle-specific fitment means brackets, spacers, or spring changes are designed to match factory mounting points and clearances. Kits engineered for the Kia Soul reduce the chance of interference with brake lines, ABS sensors, or bodywork and generally require fewer aftermarket modifications.
Verify year and trim compatibility before buying. Even small changes in subframe or suspension layout between model years can affect fit, so prioritize kits with clear vehicle fitment documentation and manufacturer guidance.
Ride Quality and Handling
How a lift kit alters ride dampening, spring rates, and steering geometry has a direct effect on comfort and vehicle control. Some kits maintain factory spring and damper rates to preserve ride character, while others change spring or shock specifications to accommodate the new ride height.
Think about your driving: daily commuting and highway miles demand stable handling and minimal increase in body roll, whereas occasional rough road use may accept a firmer setup. Choose a kit that matches the desired balance between comfort and capability and be prepared to update alignment and possibly shock absorbers.
Component Quality and Corrosion Resistance
Higher-quality materials and protective finishes extend the service life of lift components, especially in climates with road salt or off-road exposure. Look for robust brackets, hardened hardware, and coatings that resist chipping and rust.
Cheap hardware can lead to noise, premature wear, or failure. Durable components also help maintain alignment and ride height over time, reducing the need for early replacement or additional maintenance.
Installation Complexity and Service Requirements
Installation can range from a few hours with basic hand tools to a multi-day job requiring lifts and alignment equipment. Kits that use existing mounting points and include all necessary hardware and instructions reduce installation time and the likelihood of mistakes.
Also consider whether additional parts are needed, such as extended brake lines, adjustable track bars, or camber correction kits. Factor in the need for a professional alignment after installation, and whether you have access to the tools and workspace required for a safe installation.
Tire and Wheel Compatibility
One common reason to lift a vehicle is to fit larger diameter or wider tires. The changes in height and suspension geometry affect wheel offset, backspacing, and the risk of tire rubbing during full-lock steering or compression.
Measure existing clearances and check the kit's recommended tire sizes. You may need different wheel offsets or slight trimming to avoid interference. Also account for the effect of larger tires on speedometer accuracy, braking, and fuel economy.
How We Chose the Best Kia Soul Lift Kit
We screened available lift kits specifically for the Kia Soul using a set of practical, vehicle-focused filters. Primary criteria included verified fitment to the Kia Soul chassis and model years, because accurate mounting and height specifications are essential for safe installation and predictable handling. Ride quality and suspension geometry changes were evaluated to prioritize kits that maintain acceptable comfort and steering behavior.Durability and materials were considered next, focusing on corrosion resistance and robust components that hold alignment and ride height over time. Ease of installation and the clarity of instructions were weighed, since labor complexity and the need for additional parts affect real-world value. We excluded universal or generic kits that lack vehicle-specific brackets or require significant fabrication. Final selection favored kits that balanced lift height, drivability, and component quality for everyday use and occasional rough-road driving.
Our full evaluation process is outlined in our review methodology.
FAQ
How much lift can I safely add to a Kia Soul?
It depends on the specific kit and the vehicle year, but modest lifts are usually safest for preserving handling. Increases of a couple of inches often deliver clearance and tire fitment while minimizing geometry changes. Larger lifts can require additional components and setup to maintain safe steering and suspension behavior.
Will a lift kit affect ride comfort and handling?
Yes, most lifts change spring or shock behavior and can affect body roll and steering feel. Some kits are designed to retain factory-like ride quality, while others prioritize clearance and tire fitment at the expense of a firmer or less composed ride. An alignment after installation helps restore proper handling.
Do I need professional installation for a lift kit?
Many kits can be installed by mechanically competent owners with the right tools, but vehicle lifts, torque specifications, and alignment equipment are often required for a proper job. Professional installation reduces the chance of errors and ensures post-install alignment and safety checks are completed.
Will lifting the vehicle allow larger tires without rubbing?
A correctly selected and installed lift kit can provide the clearance needed for larger tires, but compatibility depends on tire width, wheel offset, and the lift height. Verify the kit's recommended tire sizes and be prepared to adjust wheel choices or perform minor trimming if necessary.
Are there extra parts I might need after lifting a Kia Soul?
Some installations require additional items such as extended brake lines, adjustable control arms, or steering alignment components to correct geometry changes. These needs vary by lift amount and kit design, so check the kit documentation and plan for potential supplementary parts.
Conclusion
Prioritize fitment, ride quality, and the realistic lift height you need when choosing a Kia Soul lift kit. Smaller lifts preserve everyday drivability and usually avoid extensive additional parts, while larger lifts increase capability but bring tradeoffs in handling and installation complexity.Assess component quality and installation requirements up front, and account for post-installation tasks such as alignment and possible supplementary parts. That approach helps you get the intended clearance and tire fitment without compromising safety or ride comfort.
Explore More:
- Check out all Kia Soul parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
