Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you want to raise your Honda Odyssey for added ground clearance or to fit larger tires, picking the right lift kit matters for safety and drivability. A properly chosen kit can maintain handling, preserve suspension geometry, and avoid rubbing or premature wear. This guide walks through a shortlist of the top lift kits for Honda Odyssey models, explaining the evaluation criteria used and the practical tradeoffs to expect. Read on to understand which features matter most and how each option is suited to common use cases.
Looking for other parts? See all Honda Odyssey parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Tema4x4 Rear Coil Spacers 20mm Lift Kit for Honda Odyssey |  |
| Most Popular A crowd favorite that many people choose with confidence | maXpeedingrods 2" Front & Rear Lift Spacer Kit |  |
| Best Quality Built to a higher standard if you want something more solid | DEALPAREX 1.6-inch Leveling Lift Kit for Honda Odyssey (1999–2017) |  |
| Best Budget The cheapest option that still gets the job done reliably | Tema4x4 Rear Shock Extenders 33mm Lift Kit for Honda Odyssey (Rear) |  |
| Most Sold A high-volume bestseller chosen again and again | maXpeedingrods Front 2" / Rear 1.5" Lift Kit for Honda Ridgeline 2017–2023 |  |
| Best Value for Money The sweet spot between price and what you get | DEALPAREX 1.6" Rear Coil Spacers Lift Kit for Honda Odyssey (1999–2017) |  |
| Best Overall The best all-around choice for most situations | Air Lift 1000 Series Air Suspension Kit 60740 |  |
1. Tema4x4 Rear Coil Spacers 20mm Lift Kit for Honda Odyssey
| Auto Part Position | Rear |
|---|---|
| Material | Polyurethane (PU) |
| Maximum Lifting Height | 20 Millimeters |
| Included Components | coil spacers |
These Tema4x4 rear coil spacers are a simple lift kit intended to add 20 mm of rear ride height to a Honda Odyssey. They slip into the coil assembly and are made from polyurethane for durability and resistance to road wear. In practice the spacers are used to reduce rear squat when carrying passengers or cargo, improve clearance for larger wheels and tires, and give a slightly more level stance when the van is loaded. Installation is straightforward for a competent DIYer with basic suspension tools and does not require new springs or struts. The kit is lightweight and affordable, and the material should hold up well to repeated loading compared with softer inserts. Limitations are the modest lift amount and that it only addresses rear height; it will not change suspension spring rates or improve heavy-load handling by itself, and proper fitment checks for year and trim are required before purchase.
Best for: Practical, reliability-focused Honda Odyssey owners who prioritize a low-risk, durable fix to reduce rear squat and gain a bit of extra clearance without reworking the suspension.
Less Ideal for: Drivers seeking a large lift, full suspension upgrade, or improved heavy-load handling should consider full spring or shock upgrades instead.
- Adds a consistent 20 mm rear lift to reduce squat under load
- Made from polyurethane for abrasion resistance and longevity
- Simple installation that does not require replacing springs or struts
- Only provides a rear lift of 20 mm so overall ride height change is modest
- Does not alter spring rate or suspension damping so heavy-load control is not improved by itself
Verdict A low-cost, durable rear-only 20 mm lift that reliably reduces squat and adds clearance but is not a substitute for a full suspension upgrade.
2. maXpeedingrods 2" Front & Rear Lift Spacer Kit
| Fitment | Vehicle Specific Fit |
|---|---|
| Maximum Lifting Height | 2 Inches |
| Included Components | Front Coil Spring Spacer, Strut Spacers, Installation Guide |
| Manufacturer | maXpeedingrods |
This kit lifts the suspension by 2 inches using front coil spring spacers and strut spacers for a straightforward bolt-on installation. It is intended to increase ground clearance and create extra fender room for larger tires, which makes driving on rough roads easier and can improve the vehicle's stance and visibility. The kit is vehicle-specific and ships with an installation guide, and the manufacturer highlights premium coating and high-strength steel for durability. In practice the spacer approach preserves much of the original ride comfort while adding clearance, and installation is simpler and faster than full strut replacement. Important limitations are fitment nuances at the rear where supplied nuts or strut geometry may require trimming or additional hardware, and the kit does not address alignment changes so camber or adjustable links may be needed after installation. This product is best when you want a quick, low-cost height gain without major suspension overhaul but expect some minor adjustments during fitment and alignment afterward.
Best for: Convenience-driven buyers who want a fast, low-effort way to raise ride height for rough-road use or a lifted look without replacing major suspension components.
Less Ideal for: Drivers seeking a full performance suspension upgrade, large lift amounts, or a no-modification direct bolt-on solution that includes alignment hardware should consider other kits.
- Quick bolt-on installation using coil spring and strut spacers
- Provides a predictable 2-inch increase in ground clearance and fender clearance
- Designed for vehicle-specific fit and includes an installation guide
- High-strength steel construction with a protective coating for corrosion resistance
- May require modification or extra hardware at the rear struts for proper fitment
- Does not include alignment adjustment components so post-install alignment or camber arms may be necessary
Verdict A budget-friendly, bolt-on 2-inch spacer kit for quick clearance gains, but expect minor fitment tweaks and alignment work after installation.
3. DEALPAREX 1.6-inch Leveling Lift Kit for Honda Odyssey (1999–2017)
| Maximum Lifting Height | 1.6 Inches |
|---|---|
| Material | Polyurethane (PU) |
| Auto Part Position | Front, Rear |
| Included Components | fitting kit |
| Automotive Fit Type | Vehicle Specific Fit |
This DEALPAREX lift kit uses polyurethane strut and coil spacers to raise a Honda Odyssey (1999–2017) about 1.6 inches, giving extra ground clearance and room for larger rims and tires. It installs as a vehicle-specific spacer kit with two strut spacers, two coil spacers, and a fitting kit, so installation can be done with common garage tools and does not require new shocks. The high-density polyurethane construction is promoted for durability and resistance to road wear, which helps maintain ride height without the sagging you get from lower-grade materials. On the road you should expect a small change to steering feel and ride firmness because spacers alter suspension geometry, and the kit does not replace dampers or springs so extreme off-road use is not recommended. For a performance-oriented Odyssey owner who wants improved clearance and the look of larger wheels with a relatively simple, OEM-compatible approach, this kit delivers a practical balance of durability and ease of fitment.
Best for: Performance-oriented buyers who want a simple, durable way to raise a Honda Odyssey for improved clearance and wheel fitment while keeping a near-factory installation process.
Less Ideal for: Drivers seeking major lift, heavy-duty off-road capability, or a complete suspension overhaul should choose full spring or shock upgrades instead.
- Vehicle-specific fit for Honda Odyssey 1999–2017 reduces modification and alignment hassle
- High-density polyurethane construction resists compression and should hold ride height longer than cheap plastics
- Includes both strut and coil spacers plus a fitting kit so needed components are bundled for installation
- Provides up to 1.6 inches of lift, enough for modest off-road clearance and larger wheel/tire fitment
- Does not replace shocks or springs so suspension damping and long-travel behavior remain unchanged
- May slightly alter steering feel and alignment, requiring a professional alignment after installation
Verdict A durable, vehicle-specific spacer kit that adds moderate lift for a Honda Odyssey with minimal modification but does not replace shocks or springs.
4. Tema4x4 Rear Shock Extenders 33mm Lift Kit for Honda Odyssey (Rear)
| Lift amount | 33mm |
|---|---|
| Position | Rear |
| Manufacturer | Tema4x4 |
This Tema4x4 kit adds 33mm of lift to the rear by fitting polyurethane shock extenders between the factory shock and mounting point. It is used to gain extra clearance for rough roads, snow, higher curbs and to create room for slightly larger wheels without changing shocks or springs. Installation is straightforward for a competent DIYer and the durable PU pieces resist impact and weather better than hard plastic. Because the kit only raises the rear, it produces a mild rake and does not change suspension travel or damping, so ride characteristics remain largely factory-like but with a higher stance. The kit is a low-cost option compared with full aftermarket shocks or spring spacers, but it is a modest lift only and not intended for heavy off-road use or to correct serious sagging. Expect an economical, easy-to-fit way to boost clearance and style on an Odyssey while accepting limits in lift range and long-term suspension tuning.
Best for: Budget-conscious buyers who want a low-cost, easy DIY way to add modest rear clearance and a more aggressive stance to a Honda Odyssey without installing new shocks or springs.
Less Ideal for: Drivers seeking a balanced lift front-to-rear, significant suspension travel changes, or heavy-duty off-road capability should consider full suspension upgrades instead.
- Provides a straightforward 33mm rear lift to increase ground clearance and curb clearance
- Polyurethane construction offers toughness against impacts and road exposure
- Simple installation that does not require replacing shocks or springs
- Low-cost way to improve stance and allow slightly larger wheels
- Rear-only lift creates a front-to-rear rake and may require alignment or additional front adjustments
- Not suitable for heavy off-road use or replacing full suspension components
Verdict An affordable, easy-to-install rear-only 33mm extender that improves clearance and stance on a Honda Odyssey but is not a replacement for full suspension upgrades.
5. maXpeedingrods Front 2" / Rear 1.5" Lift Kit for Honda Ridgeline 2017–2023
| Fitment | Honda Ridgeline 2017-2023 |
|---|---|
| Maximum Lifting Height | 2 Inches |
| Material | Alloy Steel |
| Auto Part Position | Front, Rear |
This maXpeedingrods lift kit uses laser-cut alloy steel spacers to lift the front approximately 2 inches and the rear approximately 1.5 inches on a Honda Ridgeline 2017–2023. It is a bolt-on suspension leveling kit that keeps the factory shock absorbers in place, so installation is mainly swapping in the supplied spacers and hardware rather than replacing struts. The taller front spacer and slightly smaller rear spacer provide a more level stance and help reduce rear sag when carrying loads while creating clearance for modestly larger tires. Because the parts are steel and laser cut, the kit should be durable and resist alignment issues when correctly installed. Limitations are that it is a spacer-style lift rather than a full suspension replacement, so there is a ceiling on lift height and it will not change damping or ride control like upgraded shocks would. Installation can require some effort and basic shop tools, and professional alignment after fitment is recommended to ensure correct camber and steering geometry.
Best for: Risk-averse mainstream buyers who want a conservative, factory-friendly way to gain modest ground clearance and correct rear sag without major suspension surgery.
Less Ideal for: Drivers seeking large lifts, off-road performance tuning, or improved ride damping should consider full suspension kits and upgraded shocks instead.
- Bolt-on spacer design lets you raise the truck without replacing shocks
- Laser-cut alloy steel spacers for strength and consistent fit
- Leveling geometry (higher front spacer) reduces rear sag under load
- Includes necessary hardware for installation
- Spacer lift does not improve damping or ride control like replacement struts
- Limited maximum lift height compared with full suspension kits
Verdict A durable, bolt-on spacer kit that gives the Ridgeline a modest level lift and reduced rear sag without replacing shocks, but it will not improve damping or support large lifts.
6. DEALPAREX 1.6" Rear Coil Spacers Lift Kit for Honda Odyssey (1999–2017)
| Auto Part Position | Rear |
|---|---|
| Material | Polyurethane (PU) |
| Maximum Lifting Height | 1.6 Inches |
| Included Components | fitting kit |
These DEALPAREX rear coil spacers are a simple, vehicle-specific way to lift the rear of a Honda Odyssey by about 1.6 inches. They install between the rear coil spring and its perch and come as two polyurethane spacers plus a fitting kit, so typical use is a one-axle lift to level a loaded van, reduce sag from heavy cargo, or create extra clearance for larger wheels and tires. The high-density polyurethane construction promises durability and resistance to compression compared with cheap foam or plastic spacers. Installation is straightforward for a home mechanic with basic tools and jack stands, and the product description and user reports indicate a reliable, factory-quality fit for 1999–2017 Odyssey models. Limitations are inherent to coil spacers: they raise ride height but do not change spring rate, so loads that require progressive support may still need airbags or helper springs. Also spacers only address rear clearance and will not compensate for worn shocks or springs elsewhere in the suspension system.
Best for: Practical owners who want an inexpensive, durable way to level a loaded Odyssey or gain modest rear clearance without replacing springs or adding complex hardware.
Less Ideal for: Drivers who need adjustable or progressive load support, active leveling, or a full suspension overhaul should consider airbags, helper springs, or spring replacement instead.
- Vehicle-specific fit for Honda Odyssey 1999–2017 simplifies installation and fitment questions
- 1.6 inch lift restores level stance and adds ground clearance for light off-road or larger tire fitment
- High-density polyurethane material resists compression for longer service life than lower-quality spacers
- Only raises rear ride height and does not change spring stiffness or provide active load leveling
- Does not address worn shocks or other suspension components that may still need replacement
Verdict A durable, vehicle-specific rear coil spacer that gives a cost-effective 1.6 inch lift to level a loaded Honda Odyssey but does not replace heavier-duty load-support solutions.
7. Air Lift 1000 Series Air Suspension Kit 60740
| Auto Part Position | Rear |
|---|---|
| Included Components | 2 Air springs, Mounting Brackets, All hardware, Installation guide |
| Automotive Fit Type | Vehicle Specific Fit |
| Set Name | 1000 Series |
| Model | 60740 |
The Air Lift 1000 Series kit is a simple, vehicle-specific solution for rear sag and load-leveling on compatible Honda Odysseys. The two air springs fit inside the coil springs and are inflated via an accessible air line to keep the rear end level under heavy loads or while towing. Installation is hands-on but straightforward for a competent DIYer and uses supplied brackets, hardware, and a clear illustrated guide. In use the kit reduces squat, improves highway stability, and helps prevent bottoming out without changing the stock suspension geometry. Its 5-35 psi working range and 1,000 pound capacity let you tune firmness for hauling or everyday driving. Limitations are that installation requires cutting or removing the factory jounce bumper and drilling for the air stem, which some owners find fiddly, and the kit needs an external air source for inflation rather than an integrated compressor. For a balanced buyer wanting a practical, low-cost way to restore ride height and handling on a loaded Odyssey, this kit delivers reliable performance with minimal footprint.
Best for: A balanced all-round buyer who wants a durable, low-profile load-leveling solution for a Honda Odyssey and values improved handling and ride height when towing or carrying heavy loads.
Less Ideal for: Drivers who prefer a plug-and-play system with an integrated compressor or those unwilling to perform moderate vehicle modifications should consider other options.
- Installs inside existing coil spring to eliminate sag and reduce bottoming out
- Provides up to 1,000 pounds of load-leveling capacity for towing and heavy cargo
- Air-adjustable between 5 and 35 psi for on-the-fly tuning of rear ride height
- Includes vehicle-specific mounting brackets, hardware, and illustrated instructions
- Requires cutting or modifying the factory jounce bumper and drilling for valve stems during installation
- No built-in compressor or on-board inflation system included
Verdict A practical, vehicle-specific air spring kit that restores rear ride height and stability on a loaded Honda Odyssey without altering the main suspension components.
Choosing the Right Honda Odyssey Lift Kit: Key Factors to Consider
Fitment and Vehicle-Specific Design
A lift kit designed specifically for the Honda Odyssey will account for its unique suspension layout and mounting points. Proper fitment reduces the need for cutting, welding, or extensive modifications that can compromise structural integrity or void warranties.
Choosing a vehicle-specific kit helps ensure components align correctly, prevents interference with brake lines and ABS sensors, and minimizes unpredictable changes to steering geometry. Always verify the kit lists compatible Odyssey model years and any submodel distinctions before purchasing.
Effect on Suspension Geometry and Handling
Raising ride height alters control-arm angles, driveshaft alignment, and steering linkages, which can change handling characteristics. A well-engineered kit mitigates these changes with corrective brackets, extended ball joints, or adjustable components to maintain predictable steering and tire wear.
Consider how the kit preserves camber, caster, and toe settings. Kits that ignore geometry can lead to increased tire wear, wandering, or destabilized braking behavior, especially under load or during emergency maneuvers.
Ride Quality and Dampening
Different lift approaches affect ride comfort in different ways. Spacer-style or body-lift options raise the vehicle without changing spring rates, often preserving stock comfort but offering limited suspension travel. Replacing springs or installing longer dampers can provide more travel but may require tuning to avoid a harsher ride.
Think about your primary use case: daily driving needs a balance of comfort and control, while heavier loads or light off-road use may benefit from upgraded springs and shocks designed for the new ride height.
Tire and Wheel Clearance
One of the main reasons to install a lift kit is to fit larger tires. Ensure the lift height provides enough clearance for the intended tire diameter and width without causing rubbing on fenders, steering components, or suspension elements.
Account for wheel offset and potential need for trimming or fender rolling if you plan to fit much wider tires. Also consider how additional tire mass affects unsprung weight and braking performance.
Installation Complexity and Required Modifications
Installation difficulty varies widely between kits. Some are bolt-on and can be completed with common hand tools, while others require special tools, alignment afterward, or welding. Honest, detailed instructions and complete hardware reduce installation risk and time.
Factor in whether you will perform the work yourself or need professional help. More complex installs may also require follow-up alignment and inspection to ensure safety and proper function.
Durability, Corrosion Resistance, and Warranty
Lift components are exposed to increased stress and environmental factors. Look for kits with robust materials, protective coatings, and hardware rated for long-term use. Corrosion-resistant finishes and high-quality fasteners extend service life.
A clear warranty and support from the manufacturer can provide reassurance if parts fail or fitment issues arise. Consider how long you plan to keep the vehicle and choose components that match that timeframe.
FAQ
How much lift can I safely add to a Honda Odyssey?
Safe lift height often depends on preserving suspension geometry and avoiding interference with steering components. Moderate lifts that maintain factory suspension angles and require minimal modifications are usually the safest. Larger lifts increase the chance of handling changes and may need corrective components.
Will a lift kit affect fuel economy and handling?
Raising the vehicle and fitting larger tires typically increases aerodynamic drag and rotating mass, which can reduce fuel efficiency. Handling may also change, especially if geometry is not corrected. Well-designed kits aim to minimize these effects, but some tradeoffs are common.
Can I install a lift kit myself or should I use a professional?
Some kits are designed for competent DIYers and include clear instructions and common fasteners. Others require specialized tools, alignment, or modifications that are better handled by a professional. If you are unsure about suspension work, using a shop reduces safety and fitment risks.
Do I need an alignment after installing a lift kit?
Yes. Any change in ride height can alter camber, caster, and toe settings. An alignment ensures proper tire wear and predictable handling after installation and is a recommended follow-up step for most lift installs.
Will a lift kit require changes to brakes or driveline components?
Depending on the lift height and design, you may need extended brake lines, adjusted sway bar links, or driveshaft modifications to prevent binding. Kits that avoid altering critical components reduce the need for additional parts, but you should verify whether supplemental hardware is required for your chosen height.
How We Chose the Best Honda Odyssey Lift Kit
We shortlisted options that specifically target the Honda Odyssey platform and evaluated each kit against multiple vehicle-focused criteria. Important factors included fitment accuracy to the Odyssey chassis and model years, how the lift affects suspension geometry, the kit's impact on steering and braking, and whether the hardware and instructions support a safe installation. We also considered ride quality after installation, durability of included components, and compatibility with common tire sizes for the Odyssey. Kits that required major modifications beyond typical bolt-on changes were excluded, as were options intended for other vehicle types. Our selection favored solutions that balance clearance gains with predictable handling and long-term reliability.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right lift kit for a Honda Odyssey means balancing the desired increase in clearance with impacts to handling, ride quality, and installation complexity. Prioritize kits that maintain suspension geometry, offer clear fitment for the Odyssey, and include hardware or corrective pieces needed for safe operation. Decide which tradeoffs you can accept, whether that is a mild spacer lift to preserve comfort or a more comprehensive suspension upgrade for additional travel. Plan for alignment and any supplemental parts up front to ensure a reliable, road-ready result.
Explore More:
- Check out all Honda Odyssey parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
