Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you plan to add more ground clearance, fit larger tires, or tailor your Ridgeline for weekend trails, choosing the right lift kit matters. The 2017-present Honda Ridgeline has unique suspension geometry and factory ride characteristics that affect how lift components behave on the road and off. This guide collects five top lift kits suited to the Ridgeline, shortlisted for reliable fitment and balanced ride quality.Below we explain the evaluation criteria you should care about, cover practical installation and compatibility points, and outline tradeoffs so you can pick the lift that matches how you drive. Next up are the top options that meet those standards.
Looking for other parts? See all Honda Ridgeline parts & accessories.
Top Picks at a Glance
| Best Overall Lift Kit A well-rounded, reliable lift kit that balances fit, lift, and value | Truxxx 1.5" Front Leveling Kit for Honda Ridgeline and Pilot (vehicle-specific) |  |
| Best Budget Lift Kit A low-cost spacer kit that delivers basic lift without breaking the bank | Protune Suspension Front 2" / Rear 1.5" Lift Kit for Honda Ridgeline (2017+) |  |
| Best Full-Component Lift Kit A complete kit that includes spacers, reinforced links, brackets, and hardware for a full installation | maXpeedingrods 2" Front / 1.5" Rear Lift Kit for Honda Ridgeline (2017–2023) |  |
| Best Steel-Spacer Lift Kit Heavy-duty laser-cut steel spacers and reinforced end links for durability | maXpeedingrods 1.5" Front Lift Leveling Kit with Sway Bar End Links |  |
| Best Polyurethane Lift Kit High-density polyurethane spacers that resist corrosion and reduce NVH (noise/vibration/harshness) | DEALPARTS 1.2-inch Front Strut Spacers Lift Kit (Polyurethane) |  |
1. Truxxx 1.5" Front Leveling Kit for Honda Ridgeline and Pilot (vehicle-specific)
Best Overall Lift Kit
| Auto Part Position | Front |
|---|---|
| Material | Carbon Steel |
| Included Components | Front struts, sway bar links and hardware. |
| Maximum Lifting Height | 1.5 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
This Truxxx 1.5" front leveling kit raises the front of compatible Honda Ridgeline (2017–2026) and Pilot (2016–2022) models by 1.5 inches using fabricated steel components, supplied sway bar links, and hardware. It is intended as a bolt-on solution that works with the factory struts and shocks so aftermarket dampers are not required, which simplifies installation and preserves the stock ride quality. Typical use is to correct front rake, allow slightly larger tires, or give a more balanced stance without changing suspension geometry dramatically. Notable features include vehicle-specific fitment, US-made steel construction, and included sway bar links to maintain handling. The practical benefits are straightforward setup for a competent DIY mechanic, a factory-like ride retained, and fewer parts to source. Limitations are that it only lifts the front 1.5 inches so it does not provide a full lift or increased suspension travel, and it is not a complete lift kit for heavy offroad use or large tire fitments beyond mild increases.
Best for: DIY owners who want a proven, vehicle-specific leveling solution that is straightforward to install and keeps the stock ride characteristics while improving front stance.
Less Ideal for: Drivers seeking a full suspension lift, substantial tire clearance, or heavy offroad modification should choose a multi-inch lift kit with upgraded shocks and rear components instead.
- Vehicle-specific design for Honda Ridgeline and Pilot models ensures correct fit and alignment.
- Uses factory struts and shocks so aftermarket dampers are not required.
- Includes sway bar links and hardware for a more complete install.
- Made from fabricated carbon steel for durability and shop-tested fitment.
- Front-only 1.5" lift does not increase rear height or suspension travel for serious offroad needs.
Verdict: The all-around pick for DIY mechanics who want a proven, easy-to-install lift solution that balances ride quality, parts completeness, and durability.
2. Protune Suspension Front 2" / Rear 1.5" Lift Kit for Honda Ridgeline (2017+)
Best Budget Lift Kit
| Maximum Lifting Height | 2 inches |
|---|---|
| Material Type | Steel |
| Included Components | Front Coil Spring Spacer, Strut Spacers, Installation Guide |
| Automotive Fit Type | Vehicle Specific Fit |
This Protune Suspension lift kit is a simple bolt-on spacer system designed to raise a 2017+ Honda Ridgeline without changing the factory struts or springs. Installation uses front coil spring spacers and strut spacers so a basic garage install or shop alignment is all that is needed, and the package includes a digital installation guide. The kit is built from steel with reinforced nylon spacers and heavy-duty endlinks, so it provides a durable way to gain a modest 2-inch front and 1.5-inch rear lift for fitting slightly larger tires and improving clearance. Because it is a spacer-style leveling kit, it keeps the truck's stock ride comfort and suspension geometry largely intact, but it will not provide the articulation, suspension travel, or damping improvements of a full suspension lift. This makes it an economical, low-complexity choice when you want added clearance and a lifted stance without extensive modification.
Best for: Buyers who want an inexpensive, low-effort way to raise a Ridgeline for extra clearance or slightly larger tires while keeping the stock ride and avoiding complex suspension work.
Less Ideal for: Drivers seeking serious off-road performance, increased suspension travel, or a complete lifted suspension with upgraded shocks should choose a full lift system instead.
- 100% bolt-on installation with included digital guide for straightforward fitting
- Steel construction and reinforced nylon spacers designed for long-term durability
- Preserves factory ride quality while raising front 2 inches and rear 1.5 inches
- Allows use of slightly larger tires and improves ground clearance without major suspension changes
- Spacer-style lift does not improve suspension travel, damping, or off-road articulation
Verdict: Choose this when you want an inexpensive, bolt-on spacer kit to raise ride height and fit larger tires while keeping installation simple.
3. maXpeedingrods 2" Front / 1.5" Rear Lift Kit for Honda Ridgeline (2017–2023)
Best Full-Component Lift Kit
| Fitment | Honda Ridgeline 2017-2023 |
|---|---|
| Lift height | 2" front, 1.5" rear |
| Material | Alloy Steel |
| Auto part position | Front, Rear |
This maXpeedingrods lift kit is a bolt-on spacer system designed specifically for the 2017–2023 Honda Ridgeline that raises the front roughly 2 inches and the rear about 1.5 inches. It uses laser-cut high-tensile alloy steel spacers and includes necessary hardware so the front and rear can be lifted without swapping shocks; extended sway bar end links are provided to maintain proper suspension geometry. In practice the kit gives a level, modest lift that improves clearance and tire fitment while keeping the factory ride quality largely intact. Installation is straightforward for a competent DIYer or shop because parts are vehicle-specific and bolt-in, though alignment after installation is required. The kit focuses on durability with corrosion-resistant finish but is not a full suspension overhaul, so it will not change damping characteristics or towing behavior and is best for mild off-road clearance and appearance upgrades rather than heavy-duty off-road use.
Best for: Buyers who want a mostly complete, bolt-on lift solution that adds modest clearance and includes the additional components needed for a clean installation without replacing shocks.
Less Ideal for: Drivers who need a full suspension overhaul for heavy off-road use, serious load carrying, or tuning of ride and damping should look at full-component lift systems instead.
- Vehicle-specific bolt-on spacers for a direct fit to 2017–2023 Ridgeline
- Includes extended sway bar end links and hardware for a more complete install
- Laser-cut high-tensile alloy steel construction for strength and durability
- Raises front 2" and rear 1.5" to allow larger tires and added ground clearance
- Spacer-style kit does not change shock damping or suspension travel, so heavy off-road loads may be limited
Verdict: Pick this when you want a comprehensive package with sway-bar links, brake/bracket hardware, and additional components for a finished, robust install.
4. maXpeedingrods 1.5" Front Lift Leveling Kit with Sway Bar End Links
Best Steel-Spacer Lift Kit
| Application | Honda Ridgeline 2017-2025 |
|---|---|
| Included Components | Front Lift Spacers, Sway Bar End Links |
| Material Type | High Carbon Steel |
| Maximum Lifting Height | 1.5 inches |
This front lift leveling kit uses thick steel spacers and replacement sway bar end links to raise the Honda Ridgeline front approximately 1.5 inches. It bolts to existing factory mounting points so installation is relatively straightforward and does not require cutting or major suspension changes. The high tensile carbon steel construction with powder coating is built to resist bending and corrosion, making the kit a rugged choice for drivers who want a more aggressive, leveled stance and a little extra ground clearance to run larger tires or protect the undercarriage. Because the kit only lifts the front, it is best for correcting rake or achieving a mild lift rather than for heavy-duty off-road articulation; final ride height may differ from spacer thickness due to suspension geometry. Expect minimal changes to day-to-day ride manners since the design maintains the factory suspension components and geometry.
Best for: Buyers who prioritize a rugged, factory-compatible front lift to improve stance and add modest ground clearance while keeping factory suspension components and everyday drivability.
Less Ideal for: Drivers seeking a full-height lift, major off-road suspension upgrades, or large increases in rear clearance should consider more comprehensive lift systems.
- Vehicle-specific fit for 2017–2025 Ridgeline models for straightforward compatibility
- High tensile carbon steel construction for greater resistance to deformation
- Powder-coated finish improves corrosion resistance for long-term durability
- Includes sway bar end links and necessary hardware for a complete front lift installation
- Provides only front lift so it does not produce a full vehicle lift or increase rear ground clearance
Verdict: Choose a steel-spacer kit when you want rugged, long-lasting components that better resist deformation under load and off-road use.
5. DEALPARTS 1.2-inch Front Strut Spacers Lift Kit (Polyurethane)
Best Polyurethane Lift Kit
| Maximum Lifting Height | 1.2 Inches |
|---|---|
| Material Type | Polyurethane (PU) |
| Auto Part Position | Front |
| Included Components | fitting kit |
These DEALPARTS strut spacers are a simple, lightweight way to add 1.2 inches of front lift using molded polyurethane components and a basic fitting kit. They install atop the factory strut assembly to increase ground clearance and create space for larger wheels or tires without changing springs or shocks. Polyurethane construction resists corrosion and holds shape better than cheap foam or rubber, so you should expect the spacer to keep its height and avoid rust-related binding over time. The kit includes two spacers and hardware for a vehicle-specific fit and is aimed at direct-fit installation rather than custom suspension work. Limitations are that this is a modest, front-only lift and will not alter suspension travel or damping, so ride characteristics remain largely factory; proper alignment after installation is recommended. For drivers wanting a simple, corrosion-resistant front-leveling solution, these spacers deliver a durable, low-maintenance option with straightforward installation.
Best for: Buyers who want a lightweight, corrosion-resistant front leveling solution that preserves factory suspension behavior while gaining modest clearance for slightly larger wheels.
Less Ideal for: Drivers seeking significant lift, altered ride dynamics, or full suspension upgrades should choose a complete lift kit with tuned springs and shocks instead.
- Polyurethane construction resists corrosion and maintains shape better than rubber.
- Adds a consistent 1.2 inch of front lift to increase clearance for larger wheels or light off-road use.
- Vehicle-specific fit and included hardware simplify installation compared with custom kits.
- Lightweight parts reduce added unsprung mass compared with heavier metal spacers.
- Front-only spacers do not change rear height or suspension damping and offer limited overall lift capability.
Verdict: This pick suits buyers who prefer lightweight, corrosion-resistant polyurethane spacers that maintain lift with less chance of rust and squeaks over time.
Choosing the Right 2026 Honda Ridgeline Lift Kit: Key Factors to Consider
Fitment and Vehicle Scope
Accurate fitment for the 2017-present Ridgeline is essential because suspension pickup points, control arm lengths, and steering linkages vary from other models. If a kit is not explicitly engineered for this Ridgeline generation, it can create binding, uneven tire wear, or undesirable steering behavior.
Confirm whether the kit supports your Ridgeline's common configurations such as factory wheel size, brake package, and any towing hardware. Also check whether the lift height recommended is compatible with the truck's inner fender clearances to avoid rubbing during full suspension articulation or when turning.
Ride Quality and Suspension Tuning
Lift kits can change spring rates, shock valving, and overall suspension geometry. For a daily-driven Ridgeline you will likely want a kit that maintains a predictable on-road ride while offering improved off-road performance. Stiffer setups may reduce body roll off-road but can transmit more harshness on pavement.
Consider whether the kit includes matched shocks and springs or requires reusing factory dampers. Matched systems usually provide a more balanced feel because valving is tuned to the new ride height and spring rates.
Steering, Alignment, and Handling Effects
Raising the vehicle alters steering angles and suspension relationships, which can cause toe, caster, and camber changes. Proper alignment after installation is mandatory to prevent premature tire wear and maintain directional stability.
Some lift solutions provide caster/camber correction or adjustable components to restore factory handling. If the kit does not, you may need aftermarket adjustable arms or alignment shop services to reclaim proper geometry.
Tire Clearance and Brake Compatibility
One of the most common reasons to fit a lift is to run larger tires. Ensure the recommended maximum tire size for the kit fits within the Ridgeline's wheel wells without trimming. Consider wheel offset and backspacing as well because those directly affect clearance at full lock and suspension compression.
Also verify that the kit does not interfere with brake lines, ABS sensors, or electronic modules. Extended brake lines or relocation brackets may be required for larger lifts to avoid stressing hoses during articulation.
Installation Complexity and Required Modifications
Installation difficulty ranges from simple bolt-on spacers to multi-hour lifts that require control arm changes, brake line extensions, or drivetrain adjustments. Be realistic about your mechanical skill and available tools. Some kits can be completed in a home garage with common tools and an alignment afterward; others demand a lift, press, or professional shop labor.
Factor in whether the kit includes all necessary hardware and whether it provides clear instructions. Kits that intentionally minimize cutting, welding, or complex fabrication reduce the risk of improper installation.
Durability and Long-Term Maintenance
Lift components are exposed to additional stress and environmental factors. Choose kits built from durable materials with corrosion-resistant finishes and replaceable wear items. Hardened mounting points and quality bushings help reduce play that can develop over time.
Consider the availability of replacement parts and whether the kit design allows for future servicing or upgrades. A kit that preserves access to routine maintenance areas is easier to live with over the long term.
How Much Lift Is Practical for the Ridgeline
Moderate lifts are typically the most practical for the Ridgeline because they provide improved clearance and allow for larger tires while keeping handling and steering geometry manageable. Small lifts, generally 1 to 2 inches, give a visual and functional benefit with minimal changes to factory components. Larger lifts can require additional control arm changes, brake line extensions, or driveshaft adjustments.
When planning height, also account for tire diameter. A modest 2-inch lift can often accommodate a couple of inches of tire growth, whereas taller lifts are needed for substantially larger tires. Balance desired clearance with the amount of modification you are willing to accept.
- 1 to 2 inches: minimal changes, preserves most factory geometry
- 2 to 3 inches: may require modified shocks or extended brake lines
- 3 inches and up: often needs additional steering and suspension correction
Installation and Common Shop Procedures
Installation time and procedures vary by kit design. Bolt-on spacer kits can often be installed in a few hours, while full suspension lift systems that replace springs, shocks, and arms take considerably longer. After installation, a full alignment is required to correct toe, camber, and caster values.
Some owners choose professional installation to ensure torque specs and alignment adjustments are correct, especially when the kit changes steering geometry. If you install at home, make sure to follow step-by-step instructions, use thread locker where specified, and re-torque fasteners after an initial break-in period.
- Expect an alignment after any lift installation
- Verify included hardware and torque specs before starting
- Re-check fasteners after 500 miles of road and off-road use
Maintenance Considerations After Lifting
A lifted Ridgeline may require more frequent inspections of suspension bushings, track-rod ends, and tie rod joints because changed angles can accelerate wear. Monitor tire wear patterns closely during the first few hundred miles and again after any heavy off-road use.
Remember that changing wheel and tire size affects speedometer and odometer readings. If the change is substantial, consider recalibrating electronic systems as needed for accurate readings.
- Inspect fasteners and joints after initial break-in and periodically thereafter
- Check brake line routing and ABS sensor harnesses for chafing
- Monitor tire pressures and alignment more frequently
Legal and Warranty Considerations
Modifying ride height can have implications for local vehicle regulations, inspections, and factory warranty coverage. Some jurisdictions limit maximum allowable lift or require specific safety equipment when the vehicle height is altered. Check local laws before finalizing your build.
On warranty, lifting alone does not automatically void all factory coverage, but damage directly resulting from aftermarket suspension components may not be covered. Keep documentation of the installation and the kit manufacturer's guidance in case questions arise.
- Confirm local height and modification laws
- Retain installation receipts and instructions for warranty discussions
- Consult your dealer or warranty documents for specific coverage terms
Matching Tires and Wheels to a Lifted Ridgeline
Choosing tires and wheels is as important as the lift itself. Wider tires or aggressive tread can impact fuel economy and steering feel. When selecting wheel offset, aim to place the tire within the wheel well to avoid rubbing and preserve proper scrub radius.
Consider load ratings and sidewall construction for off-road use. Taller tires increase rotating mass and can change acceleration and braking feel, so also ensure your brake system remains adequate for the new tire size.
- Check manufacturer's recommended maximum tire diameter for each kit
- Choose wheels with offsets that maintain proper tire position
- Factor in speedometer recalibration if tire diameter changes significantly
Still looking for the perfect fit?
Select your Honda Ridgeline configuration to see the most relevant Lift Kits recommendations
How We Chose the Best 2026 Honda Ridgeline Lift Kit
We prioritized lift kits that offer reliable fitment with the 2017-present Honda Ridgeline chassis and minimize changes to factory handling. Key evaluation criteria included fitment accuracy, impact on ride quality, required modifications, and compatibility with larger tires. We also considered the kit's effect on steering geometry and braking systems since these affect safety and drivability for this vehicle.Ride quality and suspension tuning: We favored kits that retain comfortable on-road manners while providing usable off-road travel. This excluded options that are designed solely for extreme competition use.Installation complexity and hardware completeness: Kits that include all required brackets, fasteners, and clear instructions scored higher than those that require significant additional parts or fabrication.Durability and corrosion protection: Components that use treated steel, quality finishes, and robust joints received higher marks for long-term value on vehicles exposed to road salt and off-road conditions.Tire and alignment compatibility: We checked recommended tire sizes and whether the kit requires alignment or additional camber/caster corrections.Exclusions: We excluded single-component spacers or adapters that only claim height without addressing geometry, and kits that require strut or axle designs incompatible with the Ridgeline's architecture. We also set aside products lacking clear fitment information for the 2017-present Ridgeline.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a lift kit affect my Ridgeline's towing capacity?
Lifts can change weight distribution and suspension dynamics, which may affect towing stability. The factory towing rating usually remains the same unless the drivetrain or brakes are modified, but you should consult tow guidelines and take extra care with heavier trailers.
How long does installation typically take for a full lift?
A full lift that replaces springs and shocks often takes a professional shop a full day or more. Simpler spacer-based lifts can be completed in a few hours by an experienced DIYer. Always allow time for a post-installation alignment.
Do I need new shocks when lifting my Ridgeline?
In many cases you will want shocks matched to the lift height because factory dampers are valved for the original ride height. Using stock shocks with a significant lift can lead to reduced damping control and premature wear.
Can I install a lift kit at home or should I use a shop?
It depends on the kit complexity and your tools. Bolt-on spacer kits are often within reach for competent DIYers. Kits requiring control arm removal, torque-to-yield fasteners, or drivetrain adjustments are better handled by a professional to ensure safety and proper alignment.
Will lifting my Ridgeline change fuel economy?
Yes, higher ride height and larger tires generally increase aerodynamic drag and rolling resistance, which can reduce fuel economy. The degree of change depends on lift height and tire size.
How do I know if a kit will fit my 2017-present Ridgeline?
Check the kit's stated fitment for the 2017-present Ridgeline and review installation notes for brake, steering, and tire recommendations. Look for kits that provide vehicle-specific brackets and clear instructions to minimize surprises during installation.
Final Verdict
When choosing a lift kit for your 2017-present Honda Ridgeline, prioritize accurate fitment, preservation of safe steering geometry, and a suspension setup that matches how you use the truck. Moderate lifts typically offer the best balance between improved clearance and everyday drivability. Be prepared for an alignment and possible minor modifications when you increase ride height.Weigh the tradeoffs between off-road capability and on-road comfort, and choose a kit that includes the necessary hardware or clear upgrade paths for alignment correction. With the right match, a lift can expand your Ridgeline's capabilities without compromising safety or long-term durability.
Explore More:
- Check out all Honda Ridgeline parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
