Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Volkswagen Atlas, installing a leveling kit can correct front-to-rear rake, increase clearance, and give the vehicle a more balanced stance. Choosing the right kit matters because fitment, ride quality, and impact on steering geometry vary between designs, and a poor choice can change handling or require extra alignment work.This guide presents five shortlisted options that meet practical fitment and performance standards. We evaluated each for installation complexity, ride comfort, and long-term durability to help you decide which direction to take next.
Looking for other parts? See all Volkswagen Atlas parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Generic 30mm Aluminum Leveling Lift Kit with Front Strut and Rear Coil Spacers for Volkswagen |  |
| Best Quality Built to a higher standard if you want something more solid | RisingTuning 30mm (1.2") Lift Kit Spacers for Volkswagen Atlas / Teramont (2017–Present) |  |
| Best Budget The cheapest option that still gets the job done reliably | 0.4 in (10 mm) Front Strut Spacers Leveling Lift Kit for Volkswagen |  |
| Highest Rated A top-rated pick with lots of positive feedback | DEALPARTS 1.2-inch Leveling Lift Kit Compatible with Volkswagen (Strut and Coil Spacers) |  |
| Best Seller A high-volume bestseller chosen again and again | Car Spacers Leveling Lift Kit 40mm Compatible with Volkswagen (Front Strut & Rear Coil Spacers) |  |
1. Generic 30mm Aluminum Leveling Lift Kit with Front Strut and Rear Coil Spacers for Volkswagen
| Included Components | Fitting kit, Front Strut Spacers 2 pcs, Rear Coil Spacers 2 pcs |
|---|---|
| Material | Aluminum |
| Automotive Fit Type | Universal Fit |
| Auto Part Position | Front, Rear |
This leveling lift kit uses 30mm aluminum strut and coil spacers to raise the vehicle for improved ground clearance and a more aggressive stance. It installs on the front struts and rear coils, and the kit ships with the necessary fitting hardware for a straightforward bolt-on installation on supported Volkswagen models. In real-world use the added clearance helps reduce bottoming out over rough roads and gives modest off-road capability while preserving factory suspension geometry because it retains the original springs and dampers. The aluminum construction keeps weight down and resists corrosion compared with cheaper materials. Limitations include a modest lift height that is intended for light trail use rather than serious off-road articulation and the universal-fit claim may require trimming or additional parts on some chassis variations. Expect a notable visual lift and slightly altered ride feel but no change to spring rates or heavy-duty load capacity.
Best for: Practical, balanced Volkswagen owners who want a mild lift for improved clearance and a cleaner stance without swapping springs or struts.
Less Ideal for: Drivers seeking large lifts, serious off-road capability, or those who plan heavy towing or large tire upgrades should choose a dedicated suspension system instead.
- 30mm aluminum spacers increase ground clearance for better obstacle clearance
- Includes front strut spacers, rear coil spacers, and fitting kit for installation
- Aluminum construction reduces corrosion and keeps components lightweight
- Maintains original springs and dampers for factory-like suspension behavior
- Modest lift is not intended for heavy off-road use or major tire upgrades
- Universal-fit may need additional adjustments for some Volkswagen submodels
Verdict: A simple 30mm aluminum spacer kit that raises Volkswagen models for better clearance and a cleaner look while keeping factory suspension hardware.
2. RisingTuning 30mm (1.2") Lift Kit Spacers for Volkswagen Atlas / Teramont (2017–Present)
| Compatibility | Volkswagen Atlas / Teramont (2017–Present) and Atlas Cross Sport/Teramont X variants |
|---|---|
| Lift height | 30mm front and rear spacers; 28mm shock extenders |
| Material Type | Polyurethane (SCU-PFL-100), Shore A 93 |
| Included components | Front coil spacers, rear strut spacers, rear shock extenders, reinforced stud bolts |
This RisingTuning lift kit uses molded polyurethane spacers and rear extenders to raise the Volkswagen Atlas/Teramont platform roughly 30mm (1.2 inches) at the front and rear. It is installed in place of or above stock spring seats and includes reinforced stud bolts and shock extenders so the vehicle keeps usable travel and ride control. The polyurethane construction resists corrosion, adds a modest damping effect compared with metal spacers, and is lighter and less expensive than aluminum or steel options. Typical use is to gain extra ground clearance for mild off-road routes, larger tires, or to restore ride height when springs have sagged; the kit is presented as a mostly bolt-on solution but requires spring compressors and a post-install wheel alignment. Limitations are that it does not replace worn springs or lift the vehicle for heavy-duty off-road articulation and alignment and proper installation are necessary to avoid changed handling characteristics.
Best for: Performance-oriented owners who want a high-quality, low-corrosion spacer kit to raise ground clearance for mild off-road use or larger tires while keeping ride comfort in mind.
Less Ideal for: Drivers seeking large suspension lifts, heavy-duty off-road articulation, or a complete spring and shock upgrade should consider full suspension systems instead.
- Polyurethane spacers resist corrosion and provide extra damping compared with metal spacers
- Comprehensive kit includes front and rear spacers, shock extenders, and reinforced stud bolts for a near-complete installation
- Increases ground clearance by about 30mm to improve off-road clearance and allow larger tires
- More affordable and lighter than aluminum or steel spacer kits
- Does not substitute for worn springs or deliver the extra suspension travel of a full lift suspension system
- Installation requires spring compression tools and a professional alignment to avoid adverse handling
Verdict: A corrosion-resistant polyurethane spacer kit that reliably adds about 30mm of lift to Volkswagen Atlas/Teramont models for improved clearance and mild off-road capability.
3. 0.4 in (10 mm) Front Strut Spacers Leveling Lift Kit for Volkswagen
| Included Components | Front Strut Spacers 2 pcs |
|---|---|
| Material Type | Aluminum |
| Auto Part Position | Front |
| Manufacturer Warranty Description | 2 Year Manufacturer |
This front strut spacer kit lifts the front of compatible Volkswagen models about 0.4 inch to reduce bottoming out and give a slightly more balanced stance. The kit includes two aluminum spacers and a fitting kit intended to bolt between the strut and the mount, so installation is straightforward for a competent DIYer or a shop. The aluminum construction keeps weight down while resisting corrosion, and the universal fit approach covers many Atlas-family platforms and other Volkswagen vehicles listed by the manufacturer. Practical benefits are improved clearance over small obstacles and a subtle leveling of front-to-rear rake without changing suspension geometry significantly. Limitations are the small amount of lift and the fact this is a spacer-only solution, so it will not change spring or shock characteristics or correct major suspension sag. Buyers should also confirm the specific model years listed before purchase to ensure fitment.
Best for: Budget-conscious Volkswagen owners who want a low-cost, simple way to add a small amount of front lift and reduce front-end rake without replacing springs or shocks.
Less Ideal for: Drivers seeking significant lift, improved heavy-load handling, or complete suspension upgrades should look at full spring or leveling kits rather than spacer-only solutions.
- Aluminum construction offers corrosion resistance and light weight
- Includes two front strut spacers and a fitting kit for installation
- Designed to raise front ride height about 0.4 inch for improved clearance
- Covers many Volkswagen Atlas-family models and related platforms
- Small lift amount that does not alter spring or damping characteristics
- Universal fit approach may require verification or minor adjustments for exact models
Verdict: A very affordable spacer kit to add a modest front lift and improved clearance on compatible Volkswagen models without replacing springs or shocks.
4. DEALPARTS 1.2-inch Leveling Lift Kit Compatible with Volkswagen (Strut and Coil Spacers)
| Material Type | Polyurethane (PU) |
|---|---|
| Maximum Lifting Height | 1.2 Inches |
| Auto Part Position | Front, Rear |
| Included Components | fitting kit |
This DEALPARTS leveling kit uses polyurethane strut and coil spacers to raise a Volkswagen vehicle by up to 1.2 inches, increasing ground clearance and allowing larger wheels or easier driving over rough surfaces. It is supplied as a vehicle-specific set with two strut spacers, two coil spacers, and a fitting kit for front and rear installation. The high-density polyurethane material is promoted for durability and corrosion resistance compared with metal components, and many buyers find installation straightforward for a lift of this size. In practice the kit alters ride height without replacing springs or struts, which keeps the original suspension geometry mostly intact but can change steering feel and load distribution. Some users reported fitment or hole alignment issues that required minor drilling or professional attention, so careful verification of model and fit is important before install. Expect a modest change to handling and the potential need for an alignment after fitting depending on your model and front/rear configuration.
Best for: Reliability-focused Volkswagen owners who prioritize a simple, low-maintenance way to gain modest ground clearance without replacing major suspension components.
Less Ideal for: Drivers seeking large lifts, significant off-road use, or a fully rebuilt suspension setup should consider full spring or strut upgrades instead.
- Vehicle-specific kit with both strut and coil spacers for front and rear installation
- Made from high-density polyurethane for corrosion resistance and long service life
- Provides up to 1.2 inches of lift to improve ground clearance and fit larger wheels
- Includes a fitting kit to simplify installation
- Some customers reported fitment and hole alignment issues that required modification
- Does not replace springs or struts so handling characteristics can change and an alignment may be needed
Verdict: A straightforward, vehicle-specific polyurethane spacer kit that reliably adds 1.2 inches of clearance for select Volkswagen models without replacing springs or struts.
5. Car Spacers Leveling Lift Kit 40mm Compatible with Volkswagen (Front Strut & Rear Coil Spacers)
| Included Components | Front Strut Spacers 2 pcs, Rear Coil Spacers 2 pcs, Fitting kit |
|---|---|
| Material Type | Polyurethane (PU) |
| Auto Part Position | Front, Rear |
| Manufacturer | FabRise Auto |
This leveling lift kit includes two front strut spacers, two rear coil spacers, and a fitting kit to raise the front and rear of compatible Volkswagen models by about 40mm. It is typically used to gain extra ground clearance for light off-road use, to reduce bumper scrape, or to achieve a slightly taller stance while retaining factory suspension components. The spacers are made from polyurethane for durability and the kit is marketed as a straightforward install with the included hardware. In practice the kit provides a noticeable height gain without changing shocks or springs, which keeps installation time and complexity lower than a full suspension lift. Expect improved clearance and a marginally firmer ride feel due to the spacer material. Limitations are that the kit does not alter suspension geometry beyond height, so alignment and potential stress on suspension bearings should be checked after installation, and it is not a substitute for a long-travel lift when serious off-road articulation is needed.
Best for: Risk-averse mainstream Volkswagen owners who want a modest, reversible increase in ride height and better clearance without the complexity of a full suspension overhaul.
Less Ideal for: Drivers who plan serious off-road use, need increased wheel travel, or prefer a complete suspension upgrade for heavy-duty applications should look at purpose-built lift kits instead.
- Includes both front strut and rear coil spacers plus a fitting kit for a complete front-and-rear lift
- Polyurethane construction offers good durability and resistance to road debris and moisture
- Simple installation compared with full suspension upgrades since shocks and springs remain unchanged
- Increases ground clearance to reduce bumper and underbody contact on rough roads
- Does not correct suspension geometry or provide additional shock travel for heavy off-road use
- May require alignment and inspection of suspension mounts after installation
Verdict: A simple polyurethane spacer kit that raises compatible Volkswagen models by about 40mm for improved clearance with minimal installation complexity.
Choosing the Right Volkswagen Atlas Leveling Kit: Key Factors to Consider
Fitment and Vehicle-Specific Design
Fitment is critical because a kit that is not designed for the Volkswagen Atlas can interfere with brake lines, sway bar links, or steering components. Vehicle-specific designs typically include brackets, spacers, or strut adapters shaped to the Atlas mounting points to reduce the need for modification.
Choosing a kit with precise fitment reduces installation time and lowers the risk of unexpected clearance issues. It also helps preserve factory suspension geometry, which affects alignment and tire wear.
Ride Quality and Suspension Tuning
Different leveling solutions alter spring rates, shock travel, and overall suspension behavior. Some kits are neutral, raising height without significantly changing ride comfort, while others can make the front feel stiffer or more floaty depending on the components used.
Consider how you use the vehicle—daily commuting, towing, or occasional off-road—and choose a kit that aligns with those needs. A kit that retains compatible damping and spring characteristics will better preserve handling and comfort.
Installation Complexity and Required Tools
Installation ranges from simple spacer swaps to strut or coil spring disassembly. Kits that bolt on with minimal disassembly reduce labor time and the chance of errors, while more involved installs may require spring compressors, alignment checks, or professional tools.
Be realistic about your mechanical skill and access to tools. Factor in whether you prefer a weekend DIY project or a shop install, since complexity directly affects cost and downtime.
Durability and Corrosion Resistance
Leveling components are exposed to road salt, moisture, and debris, so material quality matters. Components made from corrosion-resistant metals or finished with protective coatings last longer and maintain fitment tightness over time.
Long-lasting hardware reduces the likelihood of loosened fasteners or seized components, and it preserves the safety and alignment of the suspension.
Effect on Alignment and Tire Wear
Raising the front of the vehicle changes suspension geometry enough to impact camber, toe, or caster. Some kits have a minimal effect, while others require immediate alignment adjustments to prevent premature or uneven tire wear.
Plan for a post-install alignment and check tire wear patterns after initial miles. Selecting a kit that maintains proper geometry or includes alignment-friendly features will lower long-term maintenance.
Compatibility With Additional Accessories
Think about whether you will run larger tires, add skid plates, or install a hitch, because those choices interact with ride height and suspension travel. Some leveling solutions may limit the amount of lift available or change clearance for future accessory upgrades.
Choose a kit that supports your likely future changes without causing interference or requiring further suspension modification.
How We Chose the Best Volkswagen Atlas Leveling Kit
We focused on kits designed specifically for the Volkswagen Atlas and evaluated each against measurable, owner-relevant criteria. Key factors included precise vehicle fitment and hardware completeness to avoid fabrication during install. Ride quality and suspension tuning effects were assessed to ensure the kit maintains predictable handling and limits negative impacts on damping. We considered installation complexity and the availability of clear instructions or required tools so owners can gauge whether they can install the kit themselves or should seek a professional. Corrosion resistance and material quality were included to estimate longevity under daily driving and varied weather. We excluded universal or non-vehicle-specific spacers and kits that required major suspension redesigns or structural modifications. The resulting list emphasizes options that preserve driving dynamics while delivering the intended height correction and compatibility with Atlas steering and brake components.
Our full evaluation process is outlined in our review methodology.
FAQ
How much height does a typical Atlas leveling kit add?
A typical leveling kit for an SUV like the Atlas often raises the front by a couple of inches to match the rear, although exact numbers vary by kit. The intended amount is usually advertised per kit, and choosing an amount that balances clearance and steering geometry helps preserve handling.
Will a leveling kit change the vehicle ride or handling?
Yes, raising the front can affect ride and handling because it alters suspension geometry and shock travel. Many kits are engineered to minimize these changes, but you should expect some difference and plan for an alignment after installation to restore optimal handling.
Can I install a leveling kit myself?
Some kits are designed for straightforward bolt-on installation and can be done at home with basic tools, while others require disassembling struts or using spring compressors. Your mechanical skill, workspace, and the kit's instructions will determine whether DIY is reasonable.
Do I need to realign the wheels after installing a kit?
You will usually need an alignment after installation because changes in ride height often alter camber and toe settings. Getting a professional alignment helps prevent uneven tire wear and ensures the vehicle tracks correctly.
Are spacer-style leveling kits reliable long term?
Spacer-style kits can be reliable if made from quality materials and properly installed, but longevity depends on corrosion resistance, fastener quality, and whether the spacer design preserves suspension travel. Regular inspections will reveal any loosening or wear over time.
Will a leveling kit affect towing or payload capacity?
A modest front lift intended only to correct stance typically has minimal effect on rated towing or payload, but extreme changes to suspension or spring rates can alter load handling. If you frequently tow or carry heavy loads, prioritize kits that maintain proper suspension support and consult vehicle specifications.
Conclusion
When choosing a Volkswagen Atlas leveling kit, prioritize vehicle-specific fitment, ride quality, and how the kit affects suspension geometry. Those factors determine whether the kit corrects stance without compromising handling or causing alignment problems.Balance your installation capabilities and long-term needs by selecting a solution that matches intended use, allows for necessary alignments, and uses durable materials that resist corrosion.
Explore More:
- Check out all Volkswagen Atlas parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
