Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you plan to change your Kia Soul’s stance or add a bit more ground clearance, picking the right leveling kit matters for daily driving and long-term durability. The wrong kit can alter suspension geometry, affect tire wear, or reduce ride comfort. This guide highlights seven shortlisted Kia Soul leveling kit options selected for their balance of fitment reliability and ride characteristics. We evaluated compatibility, ease of installation, and how each option impacts on-road comfort and handling. Read on for a practical look at what to expect and which features to prioritize.
Looking for other parts? See all Kia Soul parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MotoFabLifts CH-2LM 2-inch Front Leveling Lift Kit |  |
| Most Popular A crowd favorite that many people choose with confidence | FLYCLE 2" Front Leveling Kit — Front Strut Spacers for Tacoma/4Runner/FJ Cruiser |  |
| Best Quality Built to a higher standard if you want something more solid | MotoFab Lifts CH-2.5 Front 2.5-inch Leveling Kit |  |
| Best Budget The cheapest option that still gets the job done reliably | PROEZE 2.5" Front Strut Spacer Leveling Kit |  |
| Most Sold A high-volume bestseller chosen again and again | DEALPARTS 1.6-inch Leveling Lift Kit for Kia Sportage (2004–2010) |  |
| Best Value for Money The sweet spot between price and what you get | KSP Performance 2" Front Strut Spacer Leveling Kit |  |
| Best Overall The best all-around choice for most situations | Rough Country 2" Leveling Lift Kit for Jeep Cherokee KL |  |
1. MotoFabLifts CH-2LM 2-inch Front Leveling Lift Kit
| Maximum Lifting Height | 2 Inches |
|---|---|
| Material | Aluminum |
| Auto Part Position | Front |
| Automotive Fit Type | Vehicle Specific Fit |
The MotoFabLifts CH-2LM is a simple 2-inch front leveling spacer kit that installs between the strut and knuckle to raise the front end and level the truck. It is CNC machined from billet aluminum and anodized for corrosion resistance, and the package includes hardware and instructions so a mechanically inclined owner can finish the job in roughly one to two hours. Typical use is cosmetic leveling and slight ride-height correction when heavier rear loads are absent; users report minimal change to steering feel and acceptable day-to-day ride comfort although the front can feel a bit firmer. Installation does not require disassembling the strut assembly, but an alignment after installation is necessary. The kit is vehicle-specific and intended as a straightforward, low-cost way to level the front without replacing springs or shocks, but it will not improve heavy-load handling and can accentuate rear sag while towing or hauling. Buyers should expect a basic, durable spacer solution rather than a full suspension upgrade.
Best for: Reliability-minded buyers who prioritize a durable, factory-quality hardware fix to level their vehicle and prefer a straightforward, low-maintenance modification.
Less Ideal for: Drivers frequently towing heavy loads, carrying consistent rear weight, or seeking improved off-road suspension performance should consider more comprehensive suspension upgrades instead.
- CNC machined billet aluminum construction for durability and corrosion resistance.
- True 2-inch lift that levels the front without strut disassembly.
- Includes necessary hardware and instructions for a mostly bolt-on installation.
- Short install time compared with full suspension lifts, typically 1 to 2 hours.
- Raises front ride height only and can make the rear sit lower under load.
- Slightly firmer front ride after installation compared with stock suspension.
- Not a replacement for upgraded shocks or coilovers for heavy off-road use.
Verdict A sturdy, easy-to-install 2-inch aluminum spacer that reliably levels the front for owners wanting a simple, long-lasting solution rather than a full suspension overhaul.
2. FLYCLE 2" Front Leveling Kit — Front Strut Spacers for Tacoma/4Runner/FJ Cruiser
| Automotive Fit Type | Vehicle Specific Fit |
|---|---|
| Material Type | Aluminum |
| Auto Part Position | Front |
| Maximum Lifting Height | 2 Inches |
| Included Components | Comes with housing |
This FLYCLE leveling kit raises the front of compatible vehicles by about 2 inches using forged 6061-T6 aluminum strut spacers and high-strength studs. It installs as a top-mounted spacer between the strut and strut tower, so most users will complete the swap in an hour or two without cutting, drilling, or taking the strut apart. The CNC-machined aluminum and anodized finish improve corrosion resistance and keep the parts light while maintaining stiffness. In practice the kit gives a noticeable, factory-quality level-up stance, restores approach angle, and can reduce front-end dive under braking. Because it is a spacer-style kit it keeps the stock suspension geometry mostly intact and often does not require shock replacement, but spacers are limited to modest lifts and will not change spring or damping rates. Installation requires basic tools and correct torqueing of new fasteners, and users should be comfortable working with a jack and stands. For someone after an easy, reversible way to level their truck, this kit delivers reliable results; drivers wanting larger lifts or a full suspension overhaul should look elsewhere.
Best for: Convenience-driven buyers who want a quick, reversible way to level their vehicle and prefer straightforward bolt-on upgrades that require basic tools and minimal garage time.
Less Ideal for: Anyone seeking a larger lift, full suspension performance upgrades, or a solution tailored for heavy off-road use should consider a complete suspension kit instead.
- Forged 6061-T6 aluminum construction for strength and corrosion resistance.
- CNC machining and anodized finish for consistent fit and durability.
- Designed for bolt-in installation without cutting or strut disassembly on compatible vehicles.
- Includes high-strength 12.9 class studs to secure the spacer.
- Typically preserves stock ride quality while providing a visible 2" front lift.
- Limited to a front lift only and suitable only for modest height increases around 2 inches.
- Does not change spring or damping characteristics so it will not improve heavy-load handling.
- Fitment is vehicle-specific and must match the exact application to avoid alignment or clearance issues.
Verdict A convenient bolt-on front spacer that reliably levels the front by about 2 inches for owners who want a fast, reversible stance upgrade.
3. MotoFab Lifts CH-2.5 Front 2.5-inch Leveling Kit
| Auto Part Position | Front |
|---|---|
| Material | Aluminum |
| Maximum Lifting Height | 2.5 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
The MotoFab CH-2.5 is a bolt-on front leveling kit designed to lift the front of a vehicle 2.5 inches without disassembling struts or coils. It installs in roughly one to two hours and uses CNC-machined billet aluminum spacers finished in powdercoat for corrosion resistance and a clean, factory-quality appearance. In typical use you replace the upper strut seat with the spacer, re-bolt the strut, and then complete an alignment; the kit is intended to preserve ride feel while providing clearance for larger tires. The design avoids cutting or major modification to suspension components, but installation can be a hands-on job that benefits from two people and the right tools. Buyers should expect to replace sway bar links and get a post-install alignment to maintain handling. The kit is vehicle-specific and delivers a true 2.5-inch front raise with durable construction, though the lift can put upper control arms closer to bump stops on very rough roads and may require minor trim or additional rear adjustments to restore stance balance.
Best for: Performance-oriented buyers who prioritize a precise, factory-quality front lift to fit larger tires and improve vehicle stance while keeping stock-style ride characteristics.
Less Ideal for: Buyers who want a universal kit or who prefer a simple aesthetic spacer without adjusting suspension geometry should look elsewhere.
- CNC-machined billet aluminum construction for strength and precise fit
- Powdercoated finish resists corrosion and matches factory suspension appearance
- Bolt-on installation that does not require strut or coil disassembly
- Provides a full 2.5-inch front lift to allow larger tires and improved stance
- Made in the USA with long-term customer support noted by reviews
- May push upper control arms closer to bump stops on very rough roads, affecting ride over big bumps
- Requires new sway bar links and a professional alignment after installation
Verdict A durable, precision 2.5-inch front leveling kit for drivers who want a factory-quality lift and room for bigger tires.
4. PROEZE 2.5" Front Strut Spacer Leveling Kit
| Maximum Lifting Height | 2.5 Inches |
|---|---|
| Material | Aluminum |
| Auto Part Position | Front |
| Automotive Fit Type | Vehicle Specific Fit |
This PROEZE leveling kit lifts the front by 2.5 inches using forged 6061-T6 aluminum strut spacers and preinstalled hardened bolts for a bolted-in installation. It is intended to be installed on the front struts to correct rake or provide extra ground clearance for larger tires, and the manufacturer says the kit can be fitted with basic hand tools in about two hours without cutting or preload adjustments. The parts are CNC machined, anodized, and heat treated to resist corrosion and maintain fit, and the kit includes the necessary hardware for a straightforward swap. Expect an immediate visual lift and slightly changed steering feel because the suspension geometry is altered; alignment after installation is recommended. This is a budget-oriented solution that gives the look and modest clearance gains of a lift without replacing struts, but it does not address long-travel suspension needs, and compatibility can be spotty across trim levels so confirm fitment for your specific Kia Soul configuration before buying.
Best for: Budget-conscious buyers who want an affordable, bolt-on way to raise the front ride height and improve stance without swapping struts or doing extensive shop work.
Less Ideal for: Drivers seeking significant off-road suspension travel, heavy-load hauling capability, or guaranteed fit across all Kia Soul trims should look at full suspension upgrades or vehicle-specific kits.
- Forged 6061-T6 aluminum spacers for strength and corrosion resistance
- Comes with preinstalled hardened bolts and required hardware for bolt-on installation
- CNC machining and anodized finish improve fit and durability
- Quick install that does not require cutting or modifying factory parts
- Alters suspension geometry so a professional alignment is necessary after installation
- Does not replace struts or provide long-travel suspension improvements
Verdict A low-cost, bolt-on front strut spacer kit that delivers 2.5 inches of lift and a quick install but does not replace struts or provide major suspension performance gains.
5. DEALPARTS 1.6-inch Leveling Lift Kit for Kia Sportage (2004–2010)
| Compatible models | Kia Sportage (JE, FQ) 08.2004 – 12.2010 |
|---|---|
| Lift height | 1.6 inch (40 mm) |
| Included components | 2 front strut spacers, 2 rear strut spacers, fitting kit |
| Material type | Polyurethane (PU) |
This DEALPARTS leveling kit uses polyurethane front and rear spacers to raise the suspension of a Kia Sportage (2004–2010) roughly 1.6 inches. It installs as a pair of front and rear strut spacers with a fitting kit, so a competent DIYer or a suspension shop can fit it without replacing struts or springs. The manufacturer highlights high-density polyurethane for durability and resistance to compression, which helps retain ride height for longer than cheap foam or rubber spacers. The main benefits are modest, factory-friendly lift for improved clearance, the ability to run larger wheels and tires, and a bolstered look without major suspension modification. Limitations are that it is a spacer kit only, so it does not change damping or spring rates and can alter steering geometry and ride feel; alignment after installation is recommended. This kit is targeted at straightforward clearance and cosmetic upgrades rather than heavy off-road use or performance suspension tuning.
Best for: Risk-averse mainstream buyers who want a modest, reversible clearance or cosmetic lift for a Kia Sportage without replacing major suspension components.
Less Ideal for: Drivers seeking full suspension upgrades for heavy off-road use, major lift, or tuned handling should consider coilover or spring-and-shock systems instead.
- Vehicle-specific fit for Kia Sportage 2004–2010 simplifies installation and compatibility checks.
- High-density polyurethane spacers designed for longer service life than basic rubber alternatives.
- Includes front and rear spacers plus a fitting kit so no extra parts are typically required for installation.
- Does not change shock damping or spring rate so handling and ride comfort may shift without additional suspension upgrades.
- Approximate lift only and may require alignment and minor adjustments after installation.
Verdict A simple, vehicle-specific polyurethane spacer kit that raises a Sportage about 1.6 inches for extra clearance and larger wheels without replacing springs or struts.
6. KSP Performance 2" Front Strut Spacer Leveling Kit
| Maximum Lifting Height | 2 Inches |
|---|---|
| Material | Aluminum |
| Included Components | 2pcs strut spacer, all hardware(bolts , nuts and washers), instruction |
| Auto Part Position | Front |
This aluminum strut spacer leveling kit lifts the front of a vehicle by approximately 2 inches using forged billet spacers, supplied hardware, and high-strength bolts. It installs between the strut and the strut tower to raise ride height without replacing the struts, so it is typically used to correct front rake, fit larger tires, or gain modest ground clearance for light off-road use. The kit is machined from aircraft-grade aluminum and powder coated to resist corrosion, and includes the bolts, nuts, and washers needed for a complete front installation. Benefits include a straightforward bolt-on approach that keeps the factory suspension components in place and reduces cost versus full lift suspensions. Limitations: the lift changes suspension geometry so an alignment is recommended after installation, it can rotate the strut which may require re-clocking or minor adjustments, and a professional or mechanically confident DIYer is advisable for correct fitment and torqueing. Compatibility and fitment should be verified for the Kia Soul before purchase because this kit is vehicle-specific and not universally applicable.
Best for: Practical optimizers who want a cost-effective way to correct front rake or clear larger tires without replacing major suspension components and who are comfortable arranging an alignment or light mechanic work.
Less Ideal for: Drivers seeking a full suspension overhaul, significant off-road travel gains, or a plug-and-play kit guaranteed to fit the Kia Soul without verification should consider alternatives.
- Bolt-on front lift that avoids replacing struts, keeping costs lower than full suspension upgrades
- Forged aircraft-grade aluminum construction for strength and improved corrosion resistance
- Includes necessary hardware for installation to simplify the purchase process
- Powder coat finish helps protect the spacers from road corrosion
- Not a full suspension lift so it only raises the front by about 2 inches and does not change shock damping
- May require re-clocking of the strut and an alignment after installation to correct suspension geometry
- Installation can be challenging for those without mechanical experience
Verdict A budget-friendly bolt-on front leveling solution that gives a modest 2-inch lift while requiring alignment and careful installation for correct suspension geometry.
7. Rough Country 2" Leveling Lift Kit for Jeep Cherokee KL
| Material | Alloy Steel |
|---|---|
| Included Components | Front Strut Spacers, Hardware, Rear Coil Spacers |
| Maximum Lifting Height | 2 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
This kit raises the front of the vehicle by about 2 inches using bolt-on front strut spacers and rear coil spacers to level the stance and gain modest ground clearance. It is normally used to fit slightly larger tires and reduce nose dive while retaining factory lines via the built-in brake line and ABS relocation on the strut spacer. The steel construction and included hardware make it a straightforward option for a home or shop install, though customers report the printed instructions can be unclear and some packs have missing hardware which requires sourcing fasteners locally. The kit is vehicle-specific and designed for a bolt-on fit, but drilling is noted in construction and trim may be required for the largest tire sizes. Practical benefits include a more aggressive look, better approach clearance for light off-road use, and an easy reversible change; limitations include the modest lift height, potential fitment exceptions, and the need to verify all fasteners and alignment after installation.
Best for: A balanced all-round buyer who wants an affordable, reversible way to level their Kia Soul while improving clearance and appearance without extensive suspension replacement.
Less Ideal for: Drivers planning heavy-duty off-road use or those seeking a large suspension lift should look at full suspension kits instead.
- Bolt-on front strut spacers and rear coil spacers provide a quick way to level the front without replacing major suspension components
- Includes brake line and ABS relocation integrated into the strut spacer so factory lines can be retained
- Durable alloy steel construction intended for light off-road use
- Designed to allow fitting of larger tires (up to roughly 32" with trimming) for improved clearance
- Includes hardware and is supported by the brand for installation assistance
- Instructions may be inaccurate or incomplete and some buyers report missing or incorrect fasteners in the kit
- Not compatible with certain models and options, so fitment must be verified before purchase
- Lift is modest and may still require trimming or additional modifications for very large tires
Verdict A budget-friendly, bolt-on 2" leveling solution that improves clearance and stance for everyday use but is limited if you need big lifts or heavy off-road capability.
Choosing the Right Kia Soul Leveling Kit: Key Factors to Consider
Compatibility and Fitment
Correct fitment is essential because the kit must match the Kia Soul’s mounting points and suspension geometry. A kit that aligns precisely with factory locations reduces the need for additional brackets, shims, or modifications.
Poor compatibility can lead to uneven tire wear, altered steering feel, or extra stress on suspension components. Check that the kit specifies model years and any necessary trim-specific notes. Fitment that requires minimal adjustment will keep installation time, alignment needs, and follow-up maintenance lower.
Ride Quality and Handling
Leveling affects suspension travel and spring preload, which in turn changes how the vehicle responds to bumps and cornering. Some kits are engineered to preserve the factory spring and shock rates, minimizing negative impacts on comfort and control.
Consider whether the goal is a subtle stance change or a more aggressive lift, because larger lifts often compromise damping and comfort. Look for kits that minimize added harshness and maintain predictable handling across common road conditions.
Installation Complexity
Installation ranges from simple bolt-on spacer kits to units that require disassembling struts or springs. Simpler kits reduce labor time and are often more suitable for DIY installation, while more involved kits may require an alignment afterward and specialized tools.
Assess your mechanical skill level and whether you have access to proper tools. Also consider whether the kit includes all necessary hardware, instructions, and torque specs to avoid trips back to the shop for missing parts.
Material and Corrosion Resistance
Materials and coatings determine how well a kit stands up to road salt, moisture, and long-term wear. Hardened steel, billet aluminum, and zinc or powder coatings are common approaches for longevity.
A kit with poor materials can deform or corrode, affecting fitment and safety. Prioritize options with proven corrosion resistance in areas where winter salt or coastal environments accelerate wear.
Alignment and Tire Wear Implications
Raising the vehicle’s front changes camber and toe relationships, which can accelerate tire wear or alter steering response if not corrected. Some kits are designed to minimize these changes, while others will necessitate a full alignment.
Plan to have an alignment checked after installation and factor this into the overall decision. Consider how the kit affects tire contact patches and whether additional adjustments or upgraded control components might be needed.
Warranty, Support, and Documentation
Good documentation and manufacturer support simplify installation and troubleshooting. Clear instructions, torque figures, and parts lists reduce mistakes during fitment.
Warranty coverage and accessible customer support can be important if a part fails or fitment issues arise. Choose products backed by straightforward installation guides and responsive technical assistance to reduce uncertainty after purchase.
FAQ
Will a leveling kit change how my Kia Soul handles?
Yes, a leveling kit typically raises the front end, which can alter steering feel and weight distribution. The degree of change depends on lift height and how the kit interacts with the existing springs and shocks. Many kits are designed to preserve near-stock handling, but you should expect some difference and consider a post-install alignment.
Can I install a leveling kit myself?
Some kits are simple bolt-on spacer designs suitable for experienced DIYers with the right tools. More involved kits may require spring compressors, strut disassembly, or professional installation. Assess your comfort with suspension work and whether you have access to alignment services afterward.
Do I need an alignment after installing a leveling kit?
An alignment is often recommended because lifting the front can change camber and toe settings. Even if a kit claims minimal geometry change, an alignment check ensures tires wear evenly and steering remains stable. Budget a post-install alignment as part of the project.
How high should I lift the front of my Kia Soul?
Small, modest lifts are usually best for a vehicle like the Kia Soul to maintain ride comfort and steering precision. Aim for the minimal height that achieves the clearance or stance you want while avoiding extreme changes to suspension geometry. Larger lifts increase the likelihood of drivability and tire clearance tradeoffs.
Will a leveling kit affect my warranty or inspections?
Modifying suspension can affect coverage depending on local regulations and warranty terms. Changes that cause component failure may complicate warranty claims. It is wise to check warranty language and local inspection rules before installing any suspension modification.
What maintenance should I expect after installation?
After installation, monitor tire wear, steering responsiveness, and any unusual noises for the first few hundred miles. Recheck torque on mounting hardware after initial use and schedule an alignment if you did not do one right away. Periodic inspections for corrosion or loosening are prudent, especially in harsh climates.
How We Chose the Best Kia Soul Leveling Kit
We focused on solutions designed specifically to lift the front of the Kia Soul by modest, vehicle-appropriate amounts rather than full suspension lifts. Key evaluation criteria included fitment accuracy to factory mounting points, the effect on ride comfort and damping, and whether the kit preserves steering geometry. We also weighed installation complexity and the availability of necessary hardware, plus long-term durability based on material and construction. Excluded were universal spacer kits that require major fabrication, full suspension lift systems, and any options that significantly change axle or control arm geometry. The final list favors kits that maintain factory tolerances, limit added vibration, and keep alignment requirements straightforward.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Kia Soul leveling kit means balancing desired clearance and stance with ride quality and steering behavior. Prioritize kits that match factory mounting points, preserve suspension geometry, and use durable materials to limit follow-up maintenance. Factor in installation complexity and the likely need for an alignment when making your decision. A conservative approach that addresses compatibility and long-term durability will give the best mix of improved ground clearance and dependable daily driving.
Explore More:
- Check out all Kia Soul parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
