Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want a more level stance and better front clearance without changing suspension geometry drastically, choosing the right Buick Enclave leveling kit matters. The right kit will address front rake, preserve ride comfort, and maintain safe steering and braking behavior. This guide highlights the top shortlisted options for the Buick Enclave and explains the practical differences that matter.We'll summarize how each shortlisted kit performs on ride quality, durability, and fitment. Read on to find the straightforward criteria that helped us narrow the field and the common tradeoffs to expect.
Looking for other parts? See all Buick Enclave parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | RisingTuning 30mm (1.2") Polyurethane Lift Kit for Buick Enclave / Cadillac XT5 XT6 / GMC Acadia |  |
| Best Value The sweet spot between price and what you get | DEALPAREX 1.2-inch Rear Coil Spring Spacers for Buick Enclave (2007–2017) |  |
| Best Budget The cheapest option that still gets the job done reliably | DEALPAREX 1.2-inch Rear Coil Spacers Leveling Lift Kit for Buick Enclave 2017-2024 |  |
| Highest Rated A top-rated pick with lots of positive feedback | Hirificing 4-Pack Rubber Coil Spring Spacers, 1–1.5" Front Lift |  |
| Best Seller A high-volume bestseller chosen again and again | DEALPAREX 2.0-inch Rear Coil Spacers Leveling Lift Kit for Buick Enclave 2007-2017 |  |
1. RisingTuning 30mm (1.2") Polyurethane Lift Kit for Buick Enclave / Cadillac XT5 XT6 / GMC Acadia
| Material Type | Polyurethane (PU) |
|---|---|
| Maximum Lifting Height | 1.2 Inches |
| Auto Part Position | Front Lower, Rear Lower |
This RisingTuning lift kit adds 30mm (1.2 inches) of lift using polyurethane front strut spacers and rear coil spacers plus reinforced stud bolts and a fitting kit. It is intended for Buick Enclave (2nd gen) and select Cadillac and GMC SUVs and is typically installed to raise ride height for improved off-road clearance, fit larger wheels or recover lost spring height. The polyurethane construction offers corrosion resistance and a modest damping effect compared with metal spacers, and the kit includes the hardware needed for installation on the specified models. Real-world benefits include increased clearance over curbs and rough roads and a cost-effective way to restore factory ride height without replacing springs. Important limitations are that proper fitment requires selecting the correct rear spacer version (VIN may be requested) and a wheel alignment is necessary after installation; some installations require a spring compressor and mechanical skill. This kit is a practical, lower-cost option for owners who want a small, reversible lift while keeping ride comfort close to stock.
Best for: Balanced all-round buyers who want a modest, reversible lift to improve clearance and usability on everyday roads and occasional rough terrain without replacing major suspension components.
Less Ideal for: Drivers seeking large lifts, heavy-duty off-road upgrades, or a completely OEM-level suspension rebuild should consider full spring or shock upgrades instead.
- Provides a consistent 30mm (1.2") lift front and rear to increase ground clearance
- Polyurethane spacers resist corrosion and add mild damping compared with metal spacers
- Includes reinforced stud bolts and a fitting kit for installation on specified models
- Works as an affordable alternative to replacing worn springs to restore ride height
- Requires wheel alignment after installation and may need a spring compressor or welding for fitment
- Rear spacers come in two versions so correct selection may require providing your VIN
Verdict: A cost-effective 30mm polyurethane spacer kit that raises ground clearance and restores ride height for Buick Enclave and compatible GM SUVs.
2. DEALPAREX 1.2-inch Rear Coil Spring Spacers for Buick Enclave (2007–2017)
| Fitment | Buick Enclave (2007–2017) |
|---|---|
| Lift height | 1.2 inch (30 mm) |
| Position | Rear |
| Material Type | Polyurethane (PU) |
These DEALPAREX coil spacers are a simple rear-leveling solution for Buick Enclave (2007–2017). Made from high-density polyurethane, the two-piece kit slips onto the coil springs to raise the rear about 1.2 inches, which helps when fitting larger wheels or gaining extra clearance for light off-road or rough-road driving. Installation is typically straightforward and can be done with basic tools and spring compression, and the included fitting kit covers what's needed for rear placement. The polyurethane material resists sagging and should outlast softer foam or rubber spacers, though it will not change spring rate or provide the damping benefits of a full suspension upgrade. Expect an uncomplicated, low-cost way to level the stance and reduce rear rake without altering ride control or requiring new shocks. This is a practical, money-conscious option for owners who want a factory-style look and modest lift rather than a full suspension overhaul.
Best for: Practical optimizers seeking a low-cost, durable way to level their Buick Enclave and gain modest rear clearance while avoiding a full suspension replacement.
Less Ideal for: Drivers looking for improved ride control, significant lift, or off-road suspension tuning should consider a full suspension kit or shock and spring upgrade instead.
- Vehicle-specific fit for Buick Enclave 2007–2017 simplifies selection and installation.
- High-density polyurethane construction resists compression and promises longer service life than foam spacers.
- Adds ~1.2 inch rear lift to improve clearance and allow installation of larger wheels without major suspension changes.
- Does not alter spring rate or improve damping so handling characteristics remain unchanged.
- Rear-only solution so front-rear balance may still require additional adjustments for some setups.
Verdict: An affordable, durable rear coil spacer kit that gives Buick Enclave owners an easy 1.2-inch rear level-up to fit bigger wheels and improve ground clearance.
3. DEALPAREX 1.2-inch Rear Coil Spacers Leveling Lift Kit for Buick Enclave 2017-2024
| Automotive Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Rear |
| Material Type | Polyurethane (PU) |
| Included Components | fittin kit |
This DEALPAREX rear coil spacer kit raises the Buick Enclave (2017-2024) about 1.2 inches using two polyurethane spacers that press into the coil springs. Installation is straightforward for a DIYer with basic suspension tools and typically involves relieving the spring tension and fitting the spacers between coils at the rear. The kit's ultra-high density polyurethane construction is designed to resist compression and environmental wear, which helps maintain ride height and prevents rapid sagging compared with cheaper foam inserts. The main practical benefits are increased ground clearance for rough roads and the ability to run larger wheels or tires without rubbing. Because this is a simple spacer solution it does not change spring rate or improve load-carrying significantly, and it only addresses the rear ride height so front-to-rear balance may need separate adjustment. Expect a firm but not harsh rear ride and no changes to factory damping or alignment from the parts themselves.
Best for: Budget-conscious Buick Enclave owners who want a low-cost, simple way to gain a slight rear lift for clearance or larger wheels without swapping springs or shocks.
Less Ideal for: Drivers seeking significant suspension performance changes, improved load handling, or a perfectly balanced front-to-rear lift should consider full spring or suspension upgrades instead.
- Vehicle-specific fit for Buick Enclave 2017-2024 simplifies installation and fitment
- Made from ultra-high density polyurethane for long service life and resistance to compression
- Increases rear ground clearance to help prevent rubbing and allow larger wheels or tires
- Only raises the rear and does not alter spring rate or improve load-carrying capacity
Verdict: A low-cost, vehicle-specific polyurethane spacer kit that reliably adds about 1.2 inches of rear lift to a Buick Enclave for extra clearance and fitment of larger wheels.
4. Hirificing 4-Pack Rubber Coil Spring Spacers, 1–1.5" Front Lift
| Brand Name | Hirificing |
|---|---|
| Automotive Fit Type | Universal Fit |
| Auto Part Position | Front |
| Material Type | Rubber |
| Maximum Lifting Height | 1 Inches |
These rubber coil spring spacers insert between front coil spring coils to restore ride height and reduce suspension sag without replacing springs. Installation is typically done by prying the spacer into the gap at a 45 degree angle while supporting the vehicle with a jack; some models may require a spring compressor for access. The product is made from heavy duty rubber intended to resist compression and wear and offers two effective lift positions, roughly 1 inch or 1.5 inches, to address mild front-end sag or to level a vehicle with added front weight. Buyers report the parts are inexpensive, easy to fit when there is space between coils, and noticeably firm up the front end. Expect variability: a few users experienced cracking or retention issues where the spacer shifted or broke under load, so long-term durability on heavier SUVs or plowed vehicles is not guaranteed. These spacers are a low-cost, minimally invasive option for extending the life of worn springs or achieving light leveling, but they are not a substitute for stronger spring hardware on heavily loaded or performance-focused Buick Enclave setups.
Best for: Reliability-focused buyers seeking a simple, low-cost fix to restore front ride height and reduce sag without changing springs, especially as a stopgap to preserve a vehicle between more substantial repairs.
Less Ideal for: Drivers who carry heavy loads regularly, use front-mounted plows, or want a long-term suspension solution should consider stronger spring upgrades or professional replacement rather than rubber spacers.
- Simple installation that can be done with basic garage tools when coil access is available
- Provides two lift options (about 1 inch or 1.5 inches) for mild leveling needs
- Made from heavy duty rubber to resist abrasion and compressive wear in normal use
- Low-cost way to reduce front sag and improve ride height without spring replacement
- Rubber construction can crack or fail under heavy load or prolonged stress
- May shift or fall out if not seated correctly or if there is insufficient coil gap
- Not intended as a permanent replacement for worn or damaged springs on heavy vehicles
Verdict: A cheap, easy-to-install rubber spacer kit that restores modest front ride height and levels a vehicle without replacing coil springs.
5. DEALPAREX 2.0-inch Rear Coil Spacers Leveling Lift Kit for Buick Enclave 2007-2017
| Fitment | Buick Enclave (I) 2007-2017 |
|---|---|
| Lift height | 2.0 inch (50 mm) |
| Position | Rear |
| Material | Polyurethane (PU) |
These DEALPAREX rear coil spacers are a simple leveling kit that lifts the back of a Buick Enclave about 2.0 inches using high-density polyurethane spacers. Installation is straightforward for a competent DIYer or a shop: the kit includes two spacers and basic fitting hardware to sit between the coil spring and spring seat without cutting or major suspension changes. In use the polyurethane construction resists compression and weather exposure better than softer foams, so the spacer maintains ride height and clearance for larger wheels and light off-road use. The design is vehicle-specific for Enclave first-generation models which reduces fitment guessing. Limitations are that this is a modest rear-only lift intended for clearance and aesthetics rather than heavy-duty load leveling or changed ride geometry, and it does not replace shocks, springs, or address front rake. Expect a small change in rear ride harshness compared with full suspension upgrades.
Best for: Risk-averse mainstream buyers who want a low-risk, vehicle-specific way to gain a modest rear lift for improved clearance and appearance without major suspension modifications.
Less Ideal for: Drivers seeking heavy-duty load leveling, significant lift for serious off-road use, or a complete suspension upgrade should consider full spring or shock solutions instead.
- Vehicle-specific fit for Buick Enclave 2007-2017 reduces fitment issues
- High-density polyurethane construction resists compression and weathering
- Simple rear-only install using included fitting kit avoids major suspension disassembly
- Raises rear clearance by about 2.0 inches to allow larger wheels or light off-road driving
- Rear-only spacers do not address front ride height or overall suspension geometry
- Not intended for heavy load leveling or as a replacement for worn springs or shocks
Verdict: A straightforward, vehicle-specific rear coil spacer kit that reliably adds about 2 inches of rear clearance for Buick Enclave (2007-2017).
Choosing the Right Buick Enclave Leveling Kit: Key Factors to Consider
Fitment And Vehicle-Specific Compatibility
Exact fitment to the Buick Enclave's front suspension is critical because spacers, strut mounts, or replacement components must line up with existing mounting points. A kit that matches the vehicle's geometry reduces the risk of accelerated wear on ball joints, tie rods, or wheel bearings.
Poorly matched parts can cause alignment drift and uneven tire wear, so confirm that the kit lists the Buick Enclave explicitly and includes all required hardware. Also check whether additional components like sway bar links or extended brake line brackets are required to maintain safe operation.
Impact On Ride Quality And Handling
Raising the front of the vehicle alters suspension travel and spring preload, which can change how the vehicle responds to bumps and cornering. Some kits are designed to minimize changes to spring rates and damping so the Enclave retains a near-factory ride, while other, more aggressive kits can make the front feel stiffer or introduce more body roll.
Consider whether you prioritize comfort or a firmer stance. Look for kits that describe their effect on NVH and discuss compatibility with the vehicle's original shocks and struts to avoid surprises after installation.
Materials And Corrosion Resistance
Leveling components sit in harsh environments and must resist corrosion to remain safe and serviceable. Aluminum spacers, zinc-plated steel plates, or stainless hardware tend to hold up better than untreated steel in regions with road salt or heavy moisture.
Durable finishes and quality fasteners reduce the chance of seizing during future service and extend the functional life of the kit. Check for warranties or coating specifications if longevity is a priority.
Installation Complexity And Required Tools
Some leveling kits are simple bolt-on spacers that can be installed with basic hand tools and a torque wrench, while others require strut removal, spring compressors, or lifting the vehicle to a higher height for safe access. Installation complexity affects whether you can do the job at home or need professional help.
Also confirm estimated install time, whether the kit includes detailed instructions, and if specialty tools are required. Kits that preserve factory alignment or require minimal disassembly typically reduce labor and alignment costs.
Effect On Alignment And Tire Wear
Lifting the front will change suspension angles and can affect caster, camber, and toe. Even modest front lifts can shift alignment enough to cause accelerated or uneven tire wear if not corrected. Some kits are engineered to keep critical geometry within factory tolerances, while others may necessitate a professional alignment after installation.
Plan for an alignment check after fitting any kit, and review whether the vendor provides guidance on alignment specs for the Buick Enclave.
Required Additional Parts And Long-Term Maintenance
Certain kits may require supplementary parts such as extended sway bar links, brake line brackets, or longer bump stops to function safely and preserve suspension travel. Factor these needs into the total effort and parts required for a proper installation.
Also think about long-term maintenance: are replacement bushings or hardware readily available, and does the design make routine service simple? Easier access and standardized fasteners reduce headache over the life of the vehicle.
How We Chose the Best Buick Enclave Leveling Kit
We focused on products designed specifically for the Buick Enclave and selected kits that claim to maintain factory alignment and steering geometry while raising the front ride height. Key evaluation criteria included fitment accuracy to the vehicle's front suspension mounting points, material quality and corrosion resistance, effect on ride comfort and NVH, and whether the kit requires additional parts such as extended sway bar links or strut spacers. We also considered installation complexity and how often the kit preserves factory alignment specs after installation.We excluded universal or multi-vehicle generic kits that do not list Buick Enclave-specific fitment and any options that required major suspension modification or cutting of OEM components. The final list emphasizes kits that balance compatibility, durability, and relatively straightforward installation for owners seeking a modest stance change without altering overall suspension tuning.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a leveling kit change how my Buick Enclave handles on the highway?
A modest front leveling kit often has a subtle effect on highway handling, but outcomes vary. Kits that preserve the vehicle's original spring and damping characteristics usually maintain similar steering feel. More aggressive lifts can change body roll and steering response, so plan for an alignment and consider the kit's design details when evaluating handling effects.
Do I need an alignment after installing a front leveling kit?
You will usually need an alignment after installation because raising the front alters suspension geometry. An alignment ensures camber, caster, and toe are set within safe ranges and helps prevent uneven tire wear. Many installers recommend a professional alignment after any change to ride height.
Can I install a leveling kit at home on my Buick Enclave?
Some kits are straightforward bolt-on designs that a skilled DIYer can install with common tools and a torque wrench. Other kits require spring compressors or strut removal, which increases complexity and risk. Assess the kit's instructions and your comfort with suspension work before attempting a home installation.
Will a leveling kit affect my vehicle's warranty or safety systems?
Modest, non-invasive leveling kits that do not cut or alter OEM components usually have less risk of impacting warranties, but outcomes depend on warranty terms and local regulations. Installing components that change suspension geometry can affect safety-related systems indirectly, so document the installation and consult your warranty or manufacturer guidance if concerned.
How do I choose between a spacer-style kit and a coil spring solution?
Spacer-style kits are typically simpler and quicker to fit, offering modest lift with minimal changes to spring rates. Coil spring solutions replace or modify springs and can address heavier lift needs while tuning spring rates. Choose based on the desired lift amount, ride quality goals, and how much modification you are comfortable undertaking.
Conclusion
When choosing a Buick Enclave leveling kit, prioritize fitment accuracy and how the kit will affect ride quality and alignment. Confirm that the kit is specifically compatible with the vehicle's front suspension and that required additional parts are accounted for.Balance the desire for a more level stance with potential tradeoffs in handling and maintenance. Planning for a post-installation alignment and selecting corrosion-resistant materials will help preserve performance and reduce long-term issues.
Explore More:
- Check out all Buick Enclave parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
