Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right intake manifold for your Nissan Versa affects engine breathing, drivability, and long-term reliability. A correct manifold restores proper airflow, prevents vacuum leaks, and helps the engine run smoothly under normal driving loads. This guide covers the seven shortlisted Nissan Versa intake manifolds that met our editorial criteria. We evaluated each option for fitment accuracy, sealing materials, and construction quality to help you find a durable, properly fitting replacement or upgrade. Read on for the factors we used to choose these top picks and what to check before you install one.
Looking for other parts? See all Nissan Versa parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Fel-Pro MS 97359 Intake Manifold Gasket Set for Nissan Versa |  |
| Most Popular A crowd favorite that many people choose with confidence | Dorman 615-175 Engine Intake Manifold |  |
| Best Quality Built to a higher standard if you want something more solid | Dorman 615-380 Intake Manifold with Gaskets (Redesigned PCV Retainer) |  |
| Best Budget The cheapest option that still gets the job done reliably | ApplianPar Valve Cover and Intake Manifold Gasket Kit for Nissan |  |
| Most Sold A high-volume bestseller chosen again and again | EVERESTWAY Aluminum Intake Manifold with Thermostat and Hardware |  |
| Best Value for Money The sweet spot between price and what you get | GELUOXI 615-175 Upper Intake Manifold with Gaskets |  |
| Best Overall The best all-around choice for most situations | A-Premium Upper Intake Manifold with Thermostat and Gaskets |  |
1. Fel-Pro MS 97359 Intake Manifold Gasket Set for Nissan Versa
| Brand | Fel-Pro |
|---|---|
| Model | MS97359 |
| Compatibility | Fits 2012-2019 Nissan Versa, 2014-2019 Versa Note, 2015-2019 Micra |
| Exterior | Machined |
This Fel-Pro intake manifold gasket set replaces the seal between the intake manifold and cylinder head on Nissan Versa engines to prevent air and coolant leaks. It is used when removing the intake manifold for maintenance or repair, or whenever a failing gasket shows symptoms like rough idle, coolant loss, or white exhaust smoke. The set uses Fel-Pro PermaDryPlus molded rubber over an aluminized steel carrier and includes locating tabs and torque limiters to aid correct placement and reduce overtightening. In practice that means easier alignment during installation and a more durable seal on worn or uneven surfaces compared with basic aftermarket sheets. The gaskets are supplied as a complete repair kit so you get the parts needed for the job. Limitations are that installation still requires basic engine disassembly and proper torque sequence, and a gasket will not fix underlying issues like warped mating surfaces or a neglected cooling system that causes repeated failures.
Best for: A reliability-focused buyer who prioritizes a proven, application-specific gasket when servicing a Nissan Versa and wants factory-quality sealing for long-term dependability.
Less Ideal for: Drivers looking for a quick fix without removing the intake manifold or those who need repairs for warped or damaged engine parts should consider other procedures or professional machine work.
- Designed for imperfect sealing surfaces using PermaDryPlus materials to improve seal reliability
- Locating tabs and torque limiters help proper alignment and reduce overtightening risk
- Includes all parts needed for an intake manifold repair so no separate purchases are required
- Requires intake manifold removal and correct installation technique to work as intended
- Will not correct damaged or warped engine mating surfaces which need machine work or replacement
Verdict A durable, application-specific gasket set that gives Nissan Versa owners a reliable factory-quality seal when performing intake manifold service.
2. Dorman 615-175 Engine Intake Manifold
| Automotive Fit Type | Universal Fit |
|---|---|
| Position | Center |
| Exterior | Machined |
| Manufacturer | Dorman Products |
| OEM Part Number | 106007; 615175; FD1413042 |
This Dorman intake manifold is an aftermarket replacement built to mirror the fit and function of the original manifold on specified older Ford-family 4.6L engines. It arrives with pre-attached gaskets, an alternator bracket and thermostat shim hardware intended to simplify installation, and the aluminum construction addresses known cracking issues found on earlier plastic versions. Install typically requires several hours and common hand tools plus a torque wrench; reviewers report the part includes enough fasteners and mounting points to complete the job without sourcing extra pieces. In real-world use buyers see reliable sealing and improved low-end torque in many cases, though some report a slight reduction in high-end power versus original performance intakes. Fitment is vehicle-specific so verifying trim and application before buying is important. This is a practical, budget-focused replacement that reduces repair time compared with sourcing OEM parts but it is not a performance upgrade and may require minor adjustments like transferring small fittings during installation.
Best for: Convenience-driven DIYers and independent installers who prioritize an easy, ready-to-install replacement to get an older Ford-family 4.6L back on the road quickly.
Less Ideal for: Buyers looking specifically for parts for a Nissan Versa or anyone seeking a performance upgrade rather than a direct replacement should look elsewhere.
- Direct replacement design with pre-attached gaskets to speed installation
- Aluminum construction reduces risk of coolant crossover cracking seen on older plastic intakes
- Includes necessary brackets and fasteners so fewer trips to the parts store
- Widely tested on the specified Ford-family engines with many user reports of reliable fit
- Made for specific older Ford/Lincoln/Mercury 4.6L applications and not compatible with other makes such as Nissan Versa
- Installation is moderately involved and can take several hours for non-professionals
- Some users report reduced top-end power compared with certain factory or performance intakes
Verdict A practical, ready-equipped aluminum replacement for aging Ford 4.6L intake manifolds that speeds repair but is not a performance part.
3. Dorman 615-380 Intake Manifold with Gaskets (Redesigned PCV Retainer)
| Manufacturer | Dorman Products |
|---|---|
| Model | Dorman 615-380 |
| Automotive Fit Type | Vehicle Specific Fit |
| Includes | Throttle body gasket, port gaskets, injector O-rings, MAP sensor O-ring, screws |
This Dorman intake manifold replaces a failing factory manifold and is intended to stop a common PCV valve failure by adding a retaining pin that keeps the valve from dislodging. It ships as a complete kit with throttle body and port gaskets, fuel injector O-rings, MAP sensor O-ring and mounting screws so you can swap the manifold without buying extra seals. The manifold is molded from a nylon polymer formulated to resist cracking and warping and is manufactured in the United States. In use it performs like a direct vehicle-specific replacement, bolting into the intake plumbing and restoring proper crankcase ventilation to eliminate oil consumption and rough-idle symptoms caused by a loose PCV valve. Installation typically requires a few hours and basic tools; some installers recommend replacing the valve cover or vent hose at the same time if they show wear. The part improves longevity versus the original design but like other plastic intake pieces it should be handled carefully during installation and checked for correct fitment before final assembly.
Best for: Performance-oriented buyers who prioritize a durable, improved replacement that fixes a known failure mode and want a direct-fit, repair-focused upgrade.
Less Ideal for: Buyers seeking a generic universal solution or those who prefer metal aftermarket manifolds for performance tuning should consider alternatives.
- Redesigned retaining pin to prevent PCV valve from becoming dislodged
- Complete kit includes gaskets, injector O-rings and necessary screws for installation
- Nylon polymer construction aimed at resisting cracking and warping
- Vehicle-specific fit intended to bolt in as a direct replacement
- Made from plastic materials so extra care is needed to avoid breakage during installation
- May require replacement of related parts such as the valve cover or vent hose for a fully reliable repair
Verdict A vehicle-specific, improved-design intake manifold kit that addresses a common PCV valve failure and provides a ready-to-install replacement for owners seeking a higher-quality fix.
4. ApplianPar Valve Cover and Intake Manifold Gasket Kit for Nissan
| Brand | ApplianPar |
|---|---|
| Item model number | 13270-5TA0A |
| Replaces part numbers | 13270-5TA0A, 13270-ET000, 14035-EL00A, 16175-JA00A |
This ApplianPar kit supplies a valve cover gasket, intake manifold gasket, and a gasket adapter intended as a direct replacement for several Nissan part numbers used on older Versa engines. It is typically used when repairing oil or vacuum leaks during routine maintenance or after removing the intake manifold. The kit’s appeal is its low cost and the inclusion of the common gaskets you will need in one package, which simplifies repairs and reduces trips to parts stores. In practice the gaskets install like typical aftermarket replacements and several users report leak-free results when properly seated. Fitment is for specific model years and some buyers noted minor fit issues with the intake oval seals feeling loose or links a bit long, so careful positioning during installation is important. If you want a cheap, complete gasket set to fix a leaking valve cover or intake manifold on an eligible Versa, this kit will usually do the job, but expect to verify fit and be prepared to make small adjustments during installation.
Best for: Budget-conscious DIYers who prioritize low parts cost when repairing a leaking intake manifold or valve cover on a Nissan Versa and who are comfortable verifying fit during installation.
Less Ideal for: Owners seeking an exact factory-quality replacement with guaranteed fitment or those who prefer dealer-sourced parts for high-mileage engines should consider OEM alternatives.
- Includes valve cover gasket, intake manifold gasket, and adapter so common leak points are covered in one purchase
- Replaces multiple Nissan part numbers, simplifying part selection for older Versa repairs
- Low-cost option that reduces overall repair expense compared with buying separate OEM parts
- Many users report satisfactory sealing when gaskets are positioned carefully during installation
- Some reviewers reported fit and tolerancing issues with the intake oval seals and connecting links
- Aftermarket materials may not match factory longevity in high-mileage or high-heat applications
Verdict A cost-effective, all-in-one gasket kit that can fix common Versa intake manifold and valve cover leaks if you accept some aftermarket fitment variability.
5. EVERESTWAY Aluminum Intake Manifold with Thermostat and Hardware
| Brand | EVERESTWAY |
|---|---|
| Material | Aluminum |
| Auto Part Position | Rear |
| Automotive Fit Type | Vehicle Specific Fit |
This intake manifold is presented as a drop-in replacement that includes the thermostat, O-ring, and mounting hardware to streamline installation. It is machined from aluminum and described as corrosion resistant, intended to replace common factory part numbers. In real-world use it is intended for a full manifold replacement job where you remove the old unit and install the new assembly using the supplied gaskets and fasteners. Customer reports show generally good sealing and long-term operation when correct fitment is used, though several buyers needed light trimming or adjustment around coil pockets to get perfect alignment. The inclusion of thermostat and accessories saves a trip to the parts store and can cut overall install time. Expect a straightforward install on a correctly matched engine but be prepared to check clearances for ignition components and perform minor fitment tweaks if needed. This part aims to offer a cost-effective factory-replacement style option but may require modest modification on some engines to achieve ideal fit and access to spark plug wells.
Best for: A risk-averse mainstream buyer looking for a complete, ready-to-install replacement who prefers restoring a vehicle with a factory-style part rather than upgrading for performance.
Less Ideal for: Not a good choice for someone seeking a high-performance intake or a bolt-on upgrade focused on power gains rather than like-for-like replacement.
- Includes thermostat, O-ring, and mounting hardware to simplify installation
- Aluminum construction advertised as corrosion resistant for longer service life
- Sold as a vehicle-specific replacement to match factory mounting points
- Some units require trimming or minor modification around ignition coil pockets for proper fit
- Fitment can be tight around spark plug access which may complicate installation for some users
Verdict A budget-friendly, factory-style aluminum intake manifold that simplifies replacement with included hardware but may need minor trimming for perfect fit.
6. GELUOXI 615-175 Upper Intake Manifold with Gaskets
| Replaces Part Numbers | 1L2Z9424FA, 1W7Z9424AB, 3W7Z9424AA, 3W7Z9424AD, 3W7Z9424AE, 6W7Z9424AA, 615-175 |
|---|---|
| Fitment | Select Ford Crown Victoria, Mustang, Explorer, Lincoln Town Car, Mercury Grand Marquis, Mountaineer V8 4.6L (specified years) |
| Manufacturer | GELUOXI |
| Exterior | Polished |
This GELUOXI upper intake manifold is a direct-replacement style unit intended to restore even air or air/fuel distribution when an original manifold or its gasket has failed. It ships with the mating gaskets built into the manifold surface so you can replace the unit as a single assembly. Typical use is to swap the failed plastic or aluminum manifold on compatible 4.6L V8 Ford engines to stop coolant leaks, reduce misfires, and recover lost performance. Buyers report the part fits and seals well when installed carefully, and the included self-tapping hardware lets you proceed without chasing every threaded insert. Practical benefits are a lower cost than OEM and a one-piece repair that gets the vehicle back on the road quickly. Limitations to be aware of: some mounting points are not pre-threaded so you may need to use the supplied self-tapping screws or re-tap holes, a few customers found accessory brackets or thermostat O-rings required adjustment, and build quality is not identical to factory units so careful torqueing and preparation are recommended.
Best for: Practical optimizers who prioritize getting a reliable repair at a significantly lower cost than factory parts and are willing to do modest preparation work during installation.
Less Ideal for: Buyers seeking an exact factory-quality, long-term OEM replacement without any fitment or hardware work should consider higher-end or dealer-sourced manifolds instead.
- Integrated gaskets reduce parts needed for installation.
- Designed to match fitment for specified 4.6L Ford engines for a straightforward replacement.
- Lower-cost alternative to factory replacement that restores function.
- Includes self-tapping screws so you can install without replacing all original fasteners.
- Some mounting points are not threaded and may require self-tapping screws or hole preparation.
- Build and finishing quality can be below factory-spec in certain areas such as brackets and O-ring fit.
- Not intended as an exact OEM-equivalent so long-term durability may vary by vehicle and install quality.
Verdict A budget-friendly replacement that restores function quickly for practical DIY repairs but requires care during installation and is not a perfect factory match.
7. A-Premium Upper Intake Manifold with Thermostat and Gaskets
| Material | Plastic |
|---|---|
| Port Quantity | 8 |
| Port Outlet Dimensions | 44 x 38 mm |
| Includes | Thermostat, O-ring, gaskets, bolts and nuts, threaded metal plug |
This A-Premium kit provides a complete upper intake manifold assembly including gaskets, a thermostat, bolts, and a threaded metal plug so you can replace a leaking or damaged intake without sourcing extra parts. The manifold is a blown plastic design that matches the factory layout and is typically used to restore coolant and vacuum sealing on older engines. Buyers report the molded torque pattern and included hardware speed installation, but some owners needed to dress or lap ports, use RTV at coolant bridges, or recheck fastener seating to stop minor coolant or vacuum leaks. The supplied thermostat has mixed reliability in reports and some installers prefer reusing a known-good thermostat. Practical benefits are the one-stop kit and lower cost compared with dealer replacements, but expect some hands-on fitting and careful torqueing to avoid distortion. This part suits a DIY-savvy owner wanting a full replacement kit, while those who want a guaranteed perfect fit with no post-install adjustments may prefer a factory-quality unit.
Best for: Balanced, hands-on buyers who value a complete, lower-cost replacement kit and are comfortable doing fitment tweaks and basic sealing work themselves.
Less Ideal for: Buyers seeking a plug-and-play, factory-quality fit with zero adjustment or those unwilling to troubleshoot minor leaks after installation.
- Complete kit includes manifold, gaskets, thermostat, bolts and plug for one-stop replacement
- Molded torque pattern and included hardware simplify installation
- Lower-cost alternative to factory replacements for budget-conscious repairs
- Plastic construction can flex or require port cleanup to achieve a perfect seal
- Included thermostat has inconsistent performance in user reports
Verdict A budget-friendly, all-in-one intake manifold kit that saves money but may require DIY fitting or sealing to match factory-level results.
Choosing the Right Nissan Versa Intake Manifold: Key Factors to Consider
Fitment and Port Alignment
Correct fitment is essential because the manifold must align precisely with the cylinder head ports and mounting surfaces. Poor alignment can cause leaks, uneven airflow, and installation difficulties.
When fitment is right, gaskets compress evenly and bolt holes line up so you can torque fasteners to spec. Misaligned ports may create turbulence or restrict flow, affecting idle quality and low-end response. Always verify the manifold is designed specifically for the Nissan Versa application and that the port shape and spacing match the head.
Gasket Type and Sealing Surfaces
The gasket material and the finish of the sealing surfaces determine how well the manifold resists vacuum and coolant leaks. Softer composite gaskets can conform to minor surface imperfections, while metal-reinforced gaskets resist extrusion under torque.
Sealing surfaces that are flat and free of casting flaws reduce the chance of warping and leaks. Consider whether the manifold includes integrated sealing lips or O-ring grooves for coolant passages, and look for mats or coatings that improve chemical resistance.
Material and Construction Quality
Manifolds are commonly made from plastic composites or aluminum; each has tradeoffs that affect heat soak, durability, and weight. High-quality materials and consistent casting or molding reduce the risk of cracks and deformation over time.
Pay attention to ribbing, wall thickness, and the finish of intake paths. Smooth internal surfaces promote steady airflow, while poor molding can create flash or irregularities that disturb flow and trapping of residues.
Vacuum and Coolant Passage Integrity
Many intake manifolds carry vacuum channels and, on some designs, coolant passages. Integrity of these internal passages matters because leaks can cause rough idle, overheating, or fluid loss.
Inspect designs for separate, well-sealed coolant channels and for robust vacuum port fittings. Where repairs are anticipated, consider how easy it is to access and service these areas without removing unrelated components.
Installation and Torque Accessibility
Ease of installation matters because tight engine bays and awkward bolt locations can make proper torquing difficult. Manifolds that clear surrounding components and provide access to fasteners reduce installation time and the likelihood of improper torque application.
Clear torque specs and recommended tightening sequences help prevent warped flanges and ensure gaskets compress evenly. Consider whether torque specs are available from the manufacturer or in service literature before you start the job.
Maintainability and Cleaning
Over time carbon deposits and oil can build up inside intake runners, affecting airflow and sensor readings. Designs that permit intake manifold cleaning or have smooth internal surfaces are easier to service.
Also consider how removable components, like integrated sensors or easy-to-reach vacuum fittings, affect maintenance. If the manifold accumulates deposits, accessibility for intake manifold cleaning or port inspection can save time and help restore performance.
FAQ
How do I know if my Nissan Versa intake manifold is leaking?
Common signs include a rough or fluctuating idle, reduced engine performance, and a hissing sound from the engine bay. You may also notice check engine lights related to fuel trim or air-fuel ratio. A smoke test or visual inspection around gasket seams and mating surfaces often helps confirm a vacuum or intake manifold leak.
Can I replace the intake manifold myself on a Nissan Versa?
Many DIYers can replace the intake manifold with basic mechanical skills, but the job requires careful attention to torque specs and hose reconnection. You will need to drain coolant if the manifold has coolant passages and follow the correct tightening sequence to avoid leaks or warped mating surfaces. If you are unsure about torque or sealing procedures, consult service information or a qualified technician.
What role does the intake manifold gasket play?
The gasket seals the mating surfaces between the manifold and the cylinder head to prevent air and coolant leaks. A damaged or degraded gasket can cause vacuum leaks, coolant loss, and poor engine performance. Choosing the correct gasket material and ensuring even compression during installation are key to long-term sealing.
Will cleaning the intake manifold fix performance problems?
Cleaning can help when deposits or carbon buildup restrict airflow or foul sensors, and it often improves idle quality and throttle response. However, cleaning will not resolve issues caused by a warped manifold, damaged port faces, or failed gaskets. Diagnose whether the root cause is a leak, buildup, or mechanical damage before assuming cleaning alone will fix the problem.
How important are torque specs when installing the intake manifold?
Torque specs are important to ensure even compression of gaskets and to prevent flange distortion. Under-torquing can lead to leaks, while over-torquing can damage threads or warp the manifold. Follow the specified torque sequence and values for the Nissan Versa to achieve a reliable seal.
How We Chose the Best Nissan Versa Intake Manifold
We focused on parts that deliver correct fitment and long-term sealing for the Nissan Versa. Key evaluation criteria included flange and port alignment to ensure precise fitment with cylinder head ports, gasket material and sealing surfaces to resist heat and chemical degradation, and runner design that affects airflow and throttle response. We also assessed construction material and manufacturing tolerances, since warped or poorly cast parts can cause vacuum leaks. Ease of installation was considered through bolt pattern consistency and access to mounting points, along with availability of clear torque specifications or documented installation guidance. Excluded items included universal manifolds, components without documented fitment to the Nissan Versa, and parts lacking information on materials or sealing surfaces. We prioritized parts that match the vehicle-specific mounting geometry and provide the necessary sealing features for reliable operation.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing an intake manifold for a Nissan Versa, prioritize correct fitment, robust sealing surfaces, and construction quality. These factors most directly affect vacuum integrity, airflow consistency, and long-term reliability. Balance ease of installation and maintainability against material choices and internal design. Focusing on port alignment, gasket type, and availability of clear torque guidance will help you select a manifold that restores proper engine operation and reduces the chance of recurring leaks.
Explore More:
- Check out all Nissan Versa parts & accessories
- Explore Engine
- Browse all Auto Parts
