Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Upgrading the exhaust tip on a Mitsubishi Eclipse can instantly refresh the rear-end appearance and influence how the car sounds at idle. Picking the right tip matters because poor fitment or the wrong material can lead to rattles, corrosion, or awkward alignment with the bumper. This guide covers seven shortlisted exhaust tips that fit the Mitsubishi Eclipse, chosen for their fitment, material quality, and installation method. Below you will find the criteria we used to evaluate each option and practical notes to help you pick the right finish and attachment style for your vehicle.
Looking for other parts? See all Mitsubishi Eclipse parts & accessories.
Top Picks at a Glance
1. EVIL ENERGY Stainless Steel Exhaust Muffler with Polished Tip
| Inlet connection size | 2 Inches |
|---|---|
| Outlet connection size | 3 Inches |
| Shape | Straight-through |
| Automotive fit type | Universal Fit |
This EVIL ENERGY muffler is a compact straight-through unit that bolts or clamps onto an existing tailpipe to deepen exhaust tone and tidy the rear styling. It is filled with sound-absorbing packing and uses dual-layer stainless steel walls to reduce vibration while producing a low, resonant note; installers can weld it, use a U-bolt or a lap/butt clamp. Typical use is as a simple, low-cost sound and appearance upgrade for a rear exhaust on daily drivers. The polished finish resists corrosion and looks OEM-friendly when trimmed to fit. Limitations: it is a universal piece so careful measurement and likely pipe extension or adapter are required for a clean fit on a Mitsubishi Eclipse, and there are reports of interior drone on some vehicles at cruising speeds. No installation instructions are included so those without basic exhaust skills should plan for professional fitting.
Best for: A reliability-focused buyer who wants an affordable, factory-quality-feeling way to add a deeper exhaust note and cleaner tailpipe appearance without extensive modification.
Less Ideal for: Drivers seeking a vehicle-specific, bolt-on tip for the Mitsubishi Eclipse with guaranteed fitment or those wanting a tuned performance muffler free of any possible cabin drone.
- Polished stainless steel finish resists corrosion and improves rear appearance.
- Straight-through design and dense packing produce a deeper, throaty exhaust note.
- Multiple installation options (weld, U-bolt, or clamp) for flexible fitting methods.
- Universal fit requires measuring and may need additional piping or adapters for a clean Mitsubishi Eclipse fit.
- Some users report cabin drone at highway cruising speeds.
- No printed installation instructions included.
Verdict A budget-friendly stainless steel muffler that improves tone and looks for the Mitsubishi Eclipse but needs careful fitment and may produce cabin drone.
2. A-KARCK 3" Inlet 4" Outlet Black Coated Stainless Steel Exhaust Tip, 12" Length
| Inlet diameter | 3 inch |
|---|---|
| Outlet diameter | 4 inch |
| Overall length | 12 inch |
| Finish type | Powder Coated |
| Material | Stainless Steel |
This slip-on exhaust tip fits a 3 inch inlet and expands to a 4 inch outlet to alter the tailpipe look and provide a finished black appearance. It is typically used as a bolt-on cosmetic upgrade for vehicles where the stock pipe diameter and routing accept a 3 inch sleeve. The tip is stainless steel with a powder coated black exterior, a rolled edge and a drainage hole on the bottom to reduce trapped moisture. Installation requires sliding the tip over the tailpipe and tightening the included fasteners with a wrench so no welding or cutting is necessary. In practice it gives a clean, larger-looking outlet and generally resists deformation, but several user reports note the black finish can flake or discolor over months of exhaust heat and road exposure and some supplied screws may be weak. If you want a quick, nonpermanent styling change for your Mitsubishi Eclipse this is an easy option, though finish longevity and hardware quality are the main limitations to consider.
Best for: Convenience-driven buyers who want a quick, reversible styling upgrade for their Mitsubishi Eclipse without cutting or welding and who prioritize straightforward installation.
Less Ideal for: Drivers seeking a long-term, high-temperature color-stable finish or a performance exhaust modification should consider higher-end welded tips or professional options instead.
- Slip-on bolt-on design requires no welding so installation is fast and reversible
- Stainless steel body resists deformation and protects the existing tailpipe
- Rolled edge and drainage hole reduce internal corrosion and offer a cleaner look
- Expands outlet visual size from 3" to 4" for a more aggressive appearance
- Powder coated finish has inconsistent longevity and may flake or discolor with prolonged heat exposure
- Some customers report supplied mounting screws are weak or may break during installation
Verdict A fast, reversible way to widen and dress an Eclipse tailpipe, but expect variable finish durability and modest hardware quality.
3. Upower Dual Wall Weld-On Polished Stainless Steel Exhaust Tip (2.5" Inlet, 3.5" Outlet, 9.5" Length) – Pack of 2
| Inlet | 2.5in |
|---|---|
| Outlet | 3.5in |
| Overall Length | 9.5in |
| Exterior | Polished |
| Model | 2.5×3.5×9.5 |
These Upower dual-wall exhaust tips are a visual and build-quality upgrade for a Mitsubishi Eclipse looking for a factory-quality finished tailpipe. They slip onto a 2.5 inch tailpipe and are intended to be secured by welding or clamp hardware depending on your installer, with a 3.5 inch flared outlet and a 9.5 inch overall length that gives a fuller visible presence at the rear. The polished stainless finish and double-wall construction resist discoloration and provide a thicker, more solid feel than single-wall tips, which helps reduce vibration and rattling. Installation is straightforward for a shop or competent DIYer who will weld or clamp them in place; they are not a performance mod and do not change exhaust flow or power. Expect improved rear-end appearance and longer-lasting shine, but plan on professional attachment for a durable fit and to match the Eclipse's factory exhaust alignment. These tips are best used as an aesthetic upgrade rather than a performance part.
Best for: Performance-oriented owners who prioritize high-quality appearance upgrades and factory-quality finish on a Mitsubishi Eclipse and want a durable, professional-looking tailpipe upgrade.
Less Ideal for: Buyers seeking a sound or horsepower change or those who want a no-install, clip-on option; also not ideal for owners unwilling to have a shop weld or securely clamp the tips in place.
- Polished 304-style stainless finish that resists discoloration and maintains appearance.
- Double-wall construction reduces vibration and looks more substantial than single-wall tips.
- Designed for weld-on or clamp installation so a shop can create a secure, permanent fit.
- 3.5 inch outlet and 9.5 inch length provide a noticeable visual upgrade to the rear profile.
- Requires welding or proper clamping for a long-lasting installation which adds cost and labor.
- Does not alter exhaust performance or sound—purely cosmetic.
- Fit depends on matching the car's tailpipe diameter and alignment; may need modification for exact fitment.
Verdict A visually substantial, corrosion-resistant exhaust tip pair that gives a Mitsubishi Eclipse a factory-quality rear upgrade when professionally fitted.
4. TriTrust Adjustable Clamp-On Exhaust Tip, Black Powder-Coated Stainless Steel
| Fitment pipe diameter | 2.5 – 3 inches |
|---|---|
| Installation type | Clamp-On |
| Material | Stainless Steel |
| Finish type | Powder Coated |
| Outlet diameter | 4.5 inches |
This TriTrust exhaust tip is a simple clamp-on styling piece designed to fit 2.5 to 3 inch tailpipes and extend the visible outlet with a 4.5 inch rolled-edge tip. Installation is straightforward using the included clamps and screws so you can add the tip without welding or major modifications. The stainless steel core with black powder coating gives a blackout look that holds up better than plain paint, and user reports note a drainage hole to reduce moisture accumulation. It is primarily cosmetic and will not meaningfully change exhaust note or performance on a Mitsubishi Eclipse, though some buyers using custom setups have noticed a slight change in tone. Fitment requires measuring your Eclipse’s tailpipe — the adjustable inlet helps accommodate small variances but will not work if the stock pipe diameter falls outside 2.5–3 inches. For budget projects this tip delivers the expected visual upgrade, but expect modest longevity compared with higher-end factory-quality polished tips and plan for periodic checks of the clamp tightness and coating wear.
Best for: Budget-conscious Mitsubishi Eclipse owners who want an easy, inexpensive visual upgrade without modifying the exhaust system and prefer a blackout look.
Less Ideal for: Drivers seeking a durable, long-lasting factory-quality replacement or a significant change in exhaust tone or performance should consider higher-end or vehicle-specific options.
- Clamp-on design installs without welding or cutting
- Adjustable inlet fits 2.5 to 3 inch tailpipes for flexible fitment
- Black powder-coated finish offers a darker, more durable look than plain paint
- Includes mounting hardware so no extra purchases required
- Cosmetic upgrade only and will not significantly alter exhaust performance
- Coating and clamps may show wear faster than premium polished tips
Verdict An affordable, easy-to-install blackout exhaust tip that improves the Mitsubishi Eclipse’s appearance but is primarily cosmetic rather than performance-enhancing.
5. Upower Polished Stainless Steel Weld-On Duo Layer Exhaust Tip (2.5" inlet, 3.5" outlet, 9.5" length)
| Inlet diameter | 2.5 inches |
|---|---|
| Outlet diameter | 3.5 inches |
| Overall length | 9.5 inches |
| Exterior | Polished stainless steel |
This polished stainless steel exhaust tip is a cosmetic and mild acoustic upgrade for a Mitsubishi Eclipse. It fits by welding to a 2.5 inch tailpipe and provides a larger 3.5 inch outlet and a 9.5 inch profile that visually enlarges the exhaust and can add a slightly deeper sound. Typical use is appearance-focused: install it at a muffler shop or on a lift, weld the collar for a permanent fit, then keep the finish clean to avoid light surface discoloration over time. Notable features are the polished exterior, duo-layer construction for added durability, and sturdy weld seams reported by other buyers. Practical benefits include an upgraded look that suits sport compact styling and a throatier exhaust note without requiring other modifications. Important limitations are that it requires welding for a secure installation, it changes only tip appearance not performance of the exhaust system, and it may need occasional polishing to maintain the mirror finish under road conditions.
Best for: Risk-averse mainstream buyers who want a factory-quality, long-lasting cosmetic upgrade for their Mitsubishi Eclipse without modifying the engine or exhaust hardware.
Less Ideal for: Drivers seeking a reversible, clamp-on installation or those wanting power gains from exhaust modifications should consider different solutions.
- Polished stainless finish gives a clean, sporty look for visual upgrades
- Duo-layer construction and solid welds increase corrosion resistance and longevity
- Larger 3.5" outlet produces a slightly deeper, throatier exhaust note
- Sturdy, permanent fit when welded by a muffler shop
- Requires welding for proper installation rather than a simple clamp-on fit
- Does not increase engine performance or change backpressure in a meaningful way
- Polished finish can show discoloration or light surface rust if not cleaned regularly
Verdict A durable, polished weld-on tip that improves the Mitsubishi Eclipse's looks and sound but requires welding and routine polishing to keep the finish pristine.
6. Upower Blue Burnt 304 Stainless Steel Exhaust Tip — 2.5" Inlet, 3.5" Outlet, Pack of 2
| Inlet diameter | 2.5" |
|---|---|
| Outlet diameter | 3.5" |
| Material | 304 Stainless Steel |
| Style | Single slant cut |
These Upower tips are a styling-focused bolt-on replacement that dress up a factory exhaust with a blue burnt finish and slant-cut outlet. They are sold as a pack of two and attach to a 2.5-inch inlet pipe, so they are typically used to cap or extend the rear muffler outlet for a cleaner, sportier look. Constructed from 304 stainless steel with vacuum-plated blue coloring, they resist corrosion better than mild steel and keep their appearance longer. Buyers should expect a cosmetic upgrade rather than performance gains; the single-layer construction and weld-on/butt-on installation mean basic fabrication or a shop visit is usually required. Several owners report easy fit and a high-quality appearance, though color can fade over time and heavier aftermarket tips will be thicker. For a Mitsubishi Eclipse, these provide a visible visual improvement to the rear end without changing exhaust flow or sound significantly.
Best for: A practical optimizer looking to improve the Mitsubishi Eclipse's appearance affordably without chasing performance gains, prioritizing value and a clean factory-style upgrade.
Less Ideal for: Anyone seeking thicker, performance-oriented tips that affect sound or exhaust flow, or owners unwilling to have the tip welded or professionally installed.
- 304 stainless steel construction offers good corrosion resistance
- Blue burnt vacuum-plated finish provides a distinctive visual upgrade
- Pack of two matches quad or dual-exit looks for symmetrical styling
- Fits a 2.5-inch inlet for straightforward fitment to compatible exhaust pipes
- Single-layer, relatively thin construction compared with premium double-wall tips
- Color finish may fade over time with heat and exposure
- Weld-on installation recommended which may require professional shop work
Verdict A budget-friendly visual upgrade for a Mitsubishi Eclipse that delivers corrosion-resistant stainless construction and bold blue styling but not performance changes.
7. Upower 2.5" Inlet to 4" Outlet Weld-On Exhaust Tip, 9" Length (Pack of 2)
| Inlet diameter | 2.5 inch |
|---|---|
| Outlet diameter | 4 inch |
| Overall length | 9 inch |
| Material | Stainless steel |
| Package quantity | 2 pieces |
These Upower tips convert a 2.5 inch tailpipe to a 4 inch rolled outlet and are sold in a two-piece pack intended for weld-on installation. On a Mitsubishi Eclipse they serve as a visual upgrade and can change the exhaust exit profile when fitted to the factory exhaust pipe. Constructed from stainless steel with a black coating, the tips resist corrosion better than plain steel and the rolled end gives a finished, OEM-style appearance. Because they are weld-on pieces the recommended use is professional installation for a secure, permanent fit and proper alignment with the Eclipse’s bumper cutout. Expect a cosmetic enhancement and a slightly louder, fuller exhaust note depending on how the tip is integrated with the existing system. Limitations include the need to match the Eclipse’s existing 2.5 inch outlet and the permanent nature of welding, which makes repositioning or removal harder than clamp-on alternatives.
Best for: Balanced buyers who want a durable, factory-quality visual upgrade for a Mitsubishi Eclipse and prefer a lasting, professionally installed finish over temporary clamps.
Less Ideal for: Drivers who want a reversible, no-weld modification or those seeking an adjustable clamp-on tip for easy removal and repositioning should look elsewhere.
- Fits 2.5 inch factory-style outlet to a larger 4 inch rolled tip for a sporty look
- Stainless steel construction with black coating improves corrosion resistance and appearance
- Rolled end and 9 inch length provide a finished, OEM-style rear bumper fit
- Sold as a pair so both exhaust exits can be matched visually
- Weld-on installation required for a proper permanent fit which adds labor and cost
- Black coating may wear over time under high-heat conditions
- Not adjustable like clamp-on tips so fit depends on correct inlet size
Verdict A durable, weld-on way to give a Mitsubishi Eclipse a larger, finished exhaust outlet and sportier look, but it requires professional installation and the correct inlet size.
Choosing the Right Mitsubishi Eclipse Exhaust Tip: Key Factors to Consider
Material and Corrosion Resistance
Material determines how well a tip stands up to heat, road salt, and moisture. Stainless steel resists rust and typically lasts longer than plated metals. Thin chrome plating can look bright initially but may peel or flake over time if exposed to repeated heating and cooling cycles.
Consider whether the finish will face salt or coastal exposure and whether the vehicle is garage-kept. Heavier gauge metal and continuous welds reduce the chance of deformation under stress and lower the likelihood of crevice corrosion where water can collect.
Attachment Method
Attachment options include clamp-on, bolt-on, and weld-on designs, each with tradeoffs. Clamp-on and bolt-on tips are reversible and simple to install without cutting or welding, which is helpful for leased vehicles or if you want to change styles later.
Welded tips provide the most permanent fit and vibration resistance but require professional installation. Look for tips with anti-rotation features or internal sleeves when using clamp or bolt attachments to minimize movement and noise.
Diameter and Fitment
A correct match between the tip inlet and the Mitsubishi Eclipse tailpipe diameter is crucial for a secure fit and clean appearance. An undersized inlet will not seat properly and can cause exhaust leaks or loosen over time. An oversized inlet may require adapters or clamps and can look bulky compared with the factory opening.
Measure the outside diameter of the existing tailpipe and the clearance around the bumper before buying. Also check for angled or offset tailpipes, which call for tips with angled cut or adjustable collars to maintain alignment and avoid contact with bumper components.
Finish and Aesthetic Fit
Finish choices affect both appearance and maintenance. Polished stainless steel offers a modern, durable look that is easy to clean and resists discoloration. Chrome finishes can be very reflective but may require more care to avoid pitting and peeling. Black or ceramic-coated tips provide a stealthier look and can hide soot but may show wear differently.
Choose a finish that matches other visible trim on the vehicle and consider whether you prefer a conservative or more performance-oriented appearance. The visible diameter and tip shape also influence perceived size and style of the exhaust.
Tip Shape and Sound Influence
Different tip shapes change the way exhaust exits and can subtly affect perceived sound. Rolled or trumpet-style tips can spread the exhaust plume and create a fuller visual profile, while slash-cut or oval tips produce a more aggressive appearance. Although tips do not usually change engine performance, their geometry can slightly affect resonance and note at idle or cruise.
If you want a louder tone, focus on exhaust components upstream of the tip. For visual harmony, select a tip shape that follows the bumper lines and complements any diffuser or valance.
Installation Complexity and Tools Required
Installation time and required tools vary by design. Clamp-on and bolt-on tips generally need basic hand tools and take under an hour, while weld-on options require a shop visit. Consider whether you can access the tailpipe easily under the vehicle and whether you will need jack stands, penetrating lubricant, or anti-seize to remove an existing tip.
Read installation instructions to confirm whether adapters or additional hardware are included. Ease of installation matters if you plan to swap tips seasonally or prefer a do-it-yourself job.
FAQ
Will adding an exhaust tip change the engine sound?
An exhaust tip alone usually has minimal impact on engine performance and only a small effect on sound. Different tip shapes and diameters can slightly alter resonance and the tone at idle or low RPMs, but significant changes come from modifications upstream like mufflers or resonators.
How do I measure my Mitsubishi Eclipse tailpipe for a proper fit?
Measure the outside diameter of the existing tailpipe where the tip will slip over or clamp. Also note the distance from the tailpipe to the bumper and any offset or angle. Those dimensions ensure the new tip aligns correctly and clears surrounding bodywork.
Is bolt-on or clamp-on better for a temporary upgrade?
Clamp-on and bolt-on tips are preferable for temporary or reversible upgrades because they do not require welding. They are typically easier to install and remove, though you should choose a design with an internal sleeve or anti-rotation feature to prevent loosening over time.
What finish holds up best against road salt and moisture?
Stainless steel finishes generally resist corrosion best in wet or salted conditions. Polished stainless is durable and easier to maintain. Plated finishes like chrome can look bright but may be more prone to pitting if exposed to harsh road conditions without regular care.
Can a tip sit too far out of the bumper?
Yes, excessive protrusion can look unbalanced and may increase the risk of scraping or contact with obstacles. Measure clearance and choose a tip length that keeps the outlet flush or slightly recessed relative to the bumper for a clean look and reduced snagging risk.
How We Chose the Best Mitsubishi Eclipse Exhaust Tip
We prioritized options that reliably fit Mitsubishi Eclipse tailpipe dimensions and mounting locations, focusing on secure attachment methods and durable finishes. Key evaluation criteria included material and corrosion resistance to assess long-term durability, attachment type such as clamp-on or bolt-on for ease of installation and stability, diameter and length compatibility with factory tailpipes to ensure proper alignment and clearance, and finish options that affect both looks and resistance to discoloration from heat. We also considered construction quality, like seam welding and wall thickness, because poor fabrication can lead to vibration or early failure. Fitment consistency across model years was reviewed to reduce the chance of mismatches. Items lacking clear fitment data or showing known durability issues were excluded. We did not include accessories that require permanent modification to the vehicle or that do not provide clear installation instructions.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Mitsubishi Eclipse exhaust tip, prioritize correct diameter and alignment, durable material, and an attachment method that matches your installation preference. Balance the desired aesthetic—whether polished, blacked-out, or chrome—with corrosion resistance and ease of maintenance. Remember that tips mainly affect appearance and minor sound character, so focus on fitment quality and finish. That approach will give the best long-term results and avoid common issues like rattling, corrosion, or poor alignment.
Explore More:
- Check out all Mitsubishi Eclipse parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
