Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the exhaust tip on your Infiniti QX60 can sharpen the vehicle's rear-end appearance and protect the tailpipe from corrosion. The right tip improves visual impact while matching the QX60's factory fit points so installation is straightforward and secure. This guide presents seven shortlisted options chosen for fit accuracy, finish quality, and durability, with notes on installation style and material. Below you'll find a concise look at why each option made the list and the key features to consider when fitting an exhaust tip to your QX60.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Upower Stainless Steel 5" Inlet 10" Outlet Rolled-Edge Bolt-On Exhaust Tip (18" Length) |  |
| Most Popular A crowd favorite that many people choose with confidence | Upower Stainless Steel Bolt-On Exhaust Tip 4" Inlet, 6" Outlet, 15" Long |  |
| Best Quality Built to a higher standard if you want something more solid | Toyota Exhaust Tip PT932-34160 |  |
| Best Budget The cheapest option that still gets the job done reliably | Upower 16" Weld-On Exhaust Tip, 2.25" Inlet to 3" Outlet, Polished 304 Stainless Steel |  |
| Most Sold A high-volume bestseller chosen again and again | Richeer Stainless Steel Exhaust Tip, 2.5" Inlet to 4" Outlet, 18" Length (pair) |  |
| Best Value for Money The sweet spot between price and what you get | Upower 2.5" to 3.5" Dual Polished 304 Stainless Steel Exhaust Tip (Weld-On) |  |
| Best Overall The best all-around choice for most situations | Upower Double-Wall Stainless Steel Exhaust Tip, 2.5" Inlet to 4" Outlet (9" Length) — Pack of 2 |  |
1. Upower Stainless Steel 5" Inlet 10" Outlet Rolled-Edge Bolt-On Exhaust Tip (18" Length)
| Inlet | 5 inch |
|---|---|
| Outlet | 10 inch |
| Overall Length | 18 inch |
| Finish Type | Polished |
| Installation | Bolt-On |
This Upower stainless exhaust tip is a simple bolt-on accessory that visually upgrades an Infiniti QX60’s exhaust exit and helps protect the factory tailpipe from exposure and corrosion. Installation is straightforward for a single-piece tip: slide the 5 inch inlet onto the vehicle tailpipe and secure with the included bolt clamp or tighten to a snug fit; some buyers report needing a light mallet tap for an especially tight fit. The mirror-polished stainless finish resists rust and keeps a showroom look with routine cleaning. Its large 10 inch rolled-edge outlet and angled cut add an aggressive, finished appearance and can slightly deepen exhaust tone on diesel and gas engines. Limitations are that fit depends on having a compatible 5 inch tailpipe or adapter on the QX60 and it is a cosmetic bolt-on rather than a performance exhaust upgrade, so it will not increase power or significantly change emissions behavior.
Best for: A reliability-focused buyer looking to preserve the QX60’s factory tailpipe while adding a durable, low-maintenance visual upgrade and cleaner finished look.
Less Ideal for: Drivers seeking performance gains, emission changes, or a precise factory-matched replacement tailored specifically to complex OEM integrated rear bumper outlets should consider other options.
- Polished stainless steel resists corrosion and keeps a long-lasting appearance.
- Bolt-on design allows installation without cutting or welding.
- Rolled-edge, angled outlet gives an aggressive, factory-quality look.
- Large outlet can slightly change exhaust tone for a deeper sound.
- Requires a 5" inlet tailpipe or adapter on the QX60 for proper fit.
- Cosmetic accessory only and does not improve engine performance.
Verdict A durable, bolt-on polished stainless tip for QX60 owners who want a low-maintenance visual upgrade and tailpipe protection rather than performance gains.
2. Upower Stainless Steel Bolt-On Exhaust Tip 4" Inlet, 6" Outlet, 15" Long
| Inlet | 4 inch |
|---|---|
| Outlet | 6 inch |
| Length | 15 inch |
| Installation | Bolt-On |
| Finish Type | Polished stainless steel |
This Upower exhaust tip is a bolt-on, mirror-polished stainless steel tip that slips over a 4" tailpipe and expands the visible outlet to 6" with a 45 degree rolled-edge cut. It is installed using the built-in clamp hardware so no welding is required, making it a quick appearance upgrade for owners who want a bolder look and a slightly louder exhaust note. The double-walled rolled edge and polished finish give a factory-quality appearance and resist corrosion better than thin plated tips. Because it clamps on, fit depends on leaving enough tailpipe for the clamp to engage and tightening the provided fastener securely. The piece is purely cosmetic and will not change performance beyond sound and styling, and prolonged exposure to salt or harsh chemicals can still cause corrosion. For a convenience-focused buyer the unit is easy to fit and gives immediate visual impact, but expect to check clamp tightness periodically and avoid harsh cleaners to preserve the finish.
Best for: Convenience-driven buyers who want a fast, low-effort styling upgrade that changes the rear appearance and sound without welding or long shop time.
Less Ideal for: Drivers seeking performance gains, exact factory-fit parts, or a tip designed for vehicles that do not have a 4" tailpipe should look at engineered replacements instead.
- Bolt-on installation with built-in clamp requires no welding or drilling
- Mirror-polished stainless steel finish for improved corrosion resistance and visual appeal
- Double-walled, rolled-edge 45 degree cut provides a factory-quality look
- Large 6" outlet creates an aggressive appearance and deeper exhaust tone
- Requires an existing 4" tailpipe and adequate pipe length for the clamp to secure
- Clamp-on design may need periodic retightening and can trap moisture if not installed carefully
Verdict A quick, bolt-on visual and sound upgrade for vehicles with a 4" tailpipe that prioritizes ease of installation over performance change.
3. Toyota Exhaust Tip PT932-34160
| Manufacturer | Toyota |
|---|---|
| Model | PT932-34160 |
| Exterior | Machined |
This machined Toyota exhaust tip is a simple, factory-style tailpipe cover meant to mount over an existing exhaust outlet. It attaches with the included clamp and spacer pieces to provide a finished, double-walled appearance and the Toyota insignia on the face. In practice it is used to tidy the look of the rear bumper and can slightly alter exhaust note when fitted, but it does not change performance. Installation is straightforward for a home mechanic: slide the tip over the tailpipe, position the spacers where needed for a snug fit, then tighten the clamp with a socket. Buyers praise the solid construction and accurate fit when the tip matches the vehicle's tailpipe profile. Important limitations are that this is a cosmetic, vehicle-specific part and fit depends on the shape and diameter of the factory tailpipe; it will not improve exhaust flow or increase power and may require fiddly alignment of spacers during install.
Best for: Performance-oriented buyers who prioritize factory-quality appearance and a clean, finished tailpipe look while keeping their vehicle close to stock.
Less Ideal for: Drivers seeking actual power gains, active sound tuning, or universal-fit bolt-on tips should consider performance exhaust components instead.
- Factory-brand machined finish gives a durable, non-plastic appearance.
- Double-walled design hides the inner exhaust pipe for a cleaner look.
- Clamped fit with spacer pieces allows adjustment to match flared or stepped tailpipes.
- Genuine manufacturer part quality reduces risk of poor fit or flimsy construction.
- Vehicle-specific sizing means it may not fit QX60 tailpipes without checking diameter and profile.
- Purely cosmetic so it does not affect horsepower or exhaust performance.
- Installation can require patience to align spacers and clamp for a tight fit.
Verdict A solid, factory-quality exhaust tip that improves rear-end appearance for buyers who want a stock-friendly, durable cosmetic upgrade rather than performance gains.
4. Upower 16" Weld-On Exhaust Tip, 2.25" Inlet to 3" Outlet, Polished 304 Stainless Steel
| Inlet Diameter | 2.25" |
|---|---|
| Outlet Diameter | 3" |
| Overall Length | 16" |
| Material | 304 Stainless Steel |
| Installation Type | Weld On |
This Upower exhaust tip is a simple cosmetic upgrade for an Infiniti QX60 with a 2.25" tailpipe that needs a polished, durable finish. It is a single-wall, weld-on design made from mirror-polished 304 stainless steel, so it resists surface corrosion and maintains a bright chrome-like look when cleaned. Typical installation for a QX60 would involve sliding the tip onto the existing tailpipe and welding it in place or having a shop weld it for a clean, permanent fit; some owners on similarly sized pipes needed light shaping or a hammer to correct out-of-round tubing before the tip would slide on. The angle-cut outlet gives a sporty appearance and can slightly alter exhaust tone but will not meaningfully change performance. This is a budget-friendly, no-frills option that focuses on looks and rust resistance rather than sound tuning or complex mounting hardware. Expect professional installation for best fit and finish and be prepared to modify a misshapen factory tailpipe for a snug fit.
Best for: Budget-conscious Infiniti QX60 owners who want a durable, factory-quality-looking tailpipe upgrade focused on appearance rather than sound or performance.
Less Ideal for: Drivers seeking a bolt-on or clamp-on installation, a marked change in exhaust tone, or a heavy-duty double-wall tip for extra insulation should consider other options.
- Mirror-polished 304 stainless steel resists rust and stays shiny with periodic cleaning.
- Weld-on construction yields a permanent, factory-quality appearance when installed correctly.
- Angle-cut outlet gives a clean, sporty look that updates rear styling.
- Universal fit for 2.25" inlet applications makes it widely compatible with tailpipes of the correct size.
- Requires welding or professional installation for a secure permanent fit.
- Designed for a 2.25" inlet so pipe sizing or minor tube reshaping may be necessary for proper fit.
- Single-wall construction offers less insulation from heat and discoloration compared with double-wall tips.
Verdict A low-cost, polished stainless weld-on tip that gives the QX60 a clean, lasting cosmetic upgrade if you have a 2.25" tailpipe and professional installation available.
5. Richeer Stainless Steel Exhaust Tip, 2.5" Inlet to 4" Outlet, 18" Length (pair)
| Inlet diameter | 2.5 inch O.D. |
|---|---|
| Outlet diameter | 4 inch |
| Overall length | 18 inch |
| Material | Stainless steel |
These Richeer exhaust tips are a weld-on, mirror-polished stainless steel pair designed to slide over a 2.5" outside-diameter tailpipe and present a 4" outlet with an 18" overall length. For the Infiniti QX60 this offers a simple visual upgrade that makes the tailpipe look larger and more finished while also slightly deepening the exhaust tone. Installation requires welding to the factory tailpipe or an experienced shop; the stainless material resists corrosion and should hold up under normal road use. The polished finish gives a near-chrome appearance but will need periodic cleaning to stay bright. Because these are welded on, you lose quick-removal flexibility and professional installation is recommended to avoid misalignment or heat damage to nearby bodywork. They do not alter performance beyond sound and styling, and they are sized specifically for a 2.5" O.D. pipe so measure the QX60 tailpipe before buying.
Best for: Risk-averse mainstream buyers seeking a factory-quality aesthetic upgrade and a deeper exhaust note for their Infiniti QX60 without major mechanical changes.
Less Ideal for: Drivers who want a reversible, bolt-on modification or who expect power or emissions changes should consider alternative tips or systems that bolt on or are engineered for performance gains.
- Mirror-polished stainless steel resists corrosion and looks close to chrome
- Designed to weld on for a permanent, flush fit to a 2.5" O.D. tailpipe
- 4" outlet enlarges visual presence and can deepen exhaust tone
- 18" length provides a substantial, finished rear appearance
- Requires welding for installation so professional labor is likely
- Only fits 2.5" outside-diameter tailpipes and is not adjustable
- Adds styling and sound but does not improve engine performance
Verdict A durable, weld-on styling upgrade that deepens the exhaust note and makes the QX60 tailpipe look bigger, but it requires welding and fits only 2.5" outside-diameter pipes.
6. Upower 2.5" to 3.5" Dual Polished 304 Stainless Steel Exhaust Tip (Weld-On)
| Installation Type | Weld-On |
|---|---|
| Finish Type | Polished |
| Material | 304 Stainless steel |
| Inlet | 2.5" |
| Outlet | 3.5" |
This Upower dual exhaust tip is a basic but well-made finishing piece for cars that need a larger, showier tailpipe exit. It slips over a 2.5 inch tailpipe and is intended to be welded on for a permanent fit; the polished 304 stainless construction and double-wall, slanted-edge design give a factory-quality chrome look that resists corrosion and cleans up easily. In practical use it primarily changes appearance and can slightly alter the outside exhaust character while reducing some drone for certain setups, but it does not change performance or backpressure in any meaningful way. Installation requires access to a welder or an exhaust shop to get a secure, gap-free joint, and clearance behind the bumper should be checked because the 3.5 inch outlet is noticeably larger. For QX60 owners looking for a durable, attractive tip that matches a practical upgrade-first mindset, this tip delivers a solid look without extra bells and whistles.
Best for: Practical optimizers who want a durable, factory-quality visual upgrade for their Infiniti QX60 without changing engine performance and who prefer lasting, shop-installed modifications.
Less Ideal for: Drivers who want a clamp-on or reversible accessory, or those seeking parts that alter exhaust power or sound significantly should look for other options.
- 304 stainless steel construction offers corrosion resistance and a polished appearance
- Double-wall, slanted-edge design provides a finished, factory-style look
- Weld-on inlet gives a permanent, secure attachment when installed by a shop
- Requires welding or professional installation rather than a simple clamp-on fit
- 3.5 inch outlet may need extra bumper clearance or trimming on some vehicles
Verdict A sturdy, polished stainless dual tip that gives the QX60 a clean, upgraded tailpipe appearance if you are willing to have it welded on.
7. Upower Double-Wall Stainless Steel Exhaust Tip, 2.5" Inlet to 4" Outlet (9" Length) — Pack of 2
| Material | 304 Stainless Steel |
|---|---|
| Inlet | 2.5" |
| Outlet | 4" |
| Overall Length | 9" |
| Installation Type | Bolt-On or Weld-On |
These Upower tips are designed to replace the visible end of the Infiniti QX60's exhaust for a cleaner, more finished look. Each tip is double-wall 304 stainless steel with a polished finish and a 2.5" inlet that enlarges to a 4" outlet across a 9" length, so installation is typically done by sliding, clamping, or welding to the factory tailpipe. The double-wall construction gives a thicker, weighty feel and better resistance to discoloration than thin single-wall tips, and the polished surface creates a bright, showroom appearance on the rear bumper. Practical benefits include a straightforward bolt-on or weld-on fit for QX60 tailpipes sized to the inlet and a durable stainless body that stands up to road grime. Limitations: these tips change only appearance and will not alter power or exhaust tone significantly, and some users report occasional surface corrosion over time depending on local conditions and maintenance. Sizing matters for fitment so confirm the QX60 tailpipe diameter before buying.
Best for: Balanced, all-round Infiniti QX60 owners who want a tidy, factory-quality visual upgrade to the rear without chasing performance gains.
Less Ideal for: People seeking a louder exhaust note, measurable power changes, or a completely bolt-on universal fit regardless of tailpipe diameter should look at alternative solutions or different tip sizes.
- Double-wall 304 stainless construction for improved durability and a heavier feel
- Polished finish gives a clean, factory-quality appearance on the rear of the QX60
- 2.5" inlet with 4" rolled outlet provides a stepped, sporty look without modifying the exhaust system
- Can be welded or bolted on depending on installer preference for a secure attachment
- Does not change exhaust performance or sound
- Fit requires the QX60 tailpipe to match the 2.5" inlet or need for additional adapter work
- Polished surface can show dirt and may require regular cleaning to maintain appearance
Verdict A robust, polished stainless double-wall tip set that delivers a clean, factory-style appearance for the Infiniti QX60 but only alters looks, not performance.
Choosing the Right Infiniti QX60 Exhaust Tip: Key Factors to Consider
Fitment And Compatibility
Proper fitment is crucial because the tip must align with the QX60 tailpipe diameter and bumper cutout to avoid rubbing or gaps. Incorrect diameter or depth can cause rattling, premature wear, or contact with the bumper under suspension movement.
Look for tips that specify the exact inlet diameter and whether adapters are needed. Consider how the tip mounts and whether the attachment allows for minor positioning adjustments to achieve a factory look.
Material And Corrosion Resistance
Material determines longevity and resistance to road salt, moisture, and exhaust heat. Stainless steel is common because it resists rust while maintaining finish; higher-grade alloys and protective coatings extend service life.
Plated or chrome finishes offer shine but can flake over time if the base metal corrodes. Prioritize construction and finish treatments that suit your local climate and driving conditions.
Mounting Method
Mounting methods vary from simple clamp-on or bolt-on attachments to weld-on installations. Bolt-on or clamp systems usually allow reversible installation without cutting, which preserves the factory exhaust. Weld-on tips provide the most permanent fit but require professional installation.
Think about whether you want an easily removable option for maintenance or a permanent upgrade that eliminates movement at the joint.
Finish And Aesthetics
The finish determines the visual impact at the rear of the QX60. Polished chrome or mirror-polished stainless steel creates a bright accent, while brushed or black finishes offer a subtler, modern look. Shape and edge detail also affect how the tip reads with the vehicle's styling.
Select a finish that complements the vehicle paint and existing trim, and consider whether the finish will show soot or require frequent cleaning to maintain appearance.
Clearance And Heat Management
Adequate clearance between the tip and bumper is essential to prevent heat transfer or contact during operation. Tip length, angle, and projection affect how exhaust gases exit and how close the tip sits to the fascia.
Tips that direct gases away from the body reduce the risk of discoloration or heat damage. Confirm measurements against the QX60's bumper profile to avoid interference when turning or during suspension travel.
Maintenance And Serviceability
Consider how easy it will be to clean and service the tip over time. Smooth, polished surfaces are easier to wipe down, but some finishes conceal soot better than mirror surfaces. Removable tips simplify cleaning and allow inspection of the exhaust outlet.
Also assess whether replacement hardware is readily available and whether the mounting method permits straightforward removal for detailing or repair.
FAQ
Will an aftermarket exhaust tip change the sound of my Infiniti QX60?
A basic exhaust tip typically has minimal effect on overall exhaust tone because it only alters the terminal section of the system. Tips with internal resonators or large-diameter designs can slightly affect resonance, but most bolt-on tips will not produce a noticeable change in engine sound.
Can I install an exhaust tip on the Infiniti QX60 myself?
Many clamp-on or bolt-on tips can be installed with common hand tools and basic mechanical ability. Ensure you have the correct inlet diameter and follow the manufacturer instructions for positioning and torque. Welding or permanent modifications should be done by a qualified technician.
What material is best for longevity on the QX60?
Stainless steel is generally the most durable option because it resists rust and withstands exhaust heat. Higher-grade stainless alloys or thicker wall construction last longer in wet or salted-road environments. Coated or plated tips can look good initially but may require more upkeep if the base metal begins to corrode.
Do I need to modify the bumper to fit a new tip?
If the tip matches the QX60's existing outlet position and dimensions, no bumper modification should be necessary. However, oversized or uniquely shaped tips may require trimming or fitting adjustments to ensure proper clearance and appearance. Verify measurements before attempting installation.
How do I prevent the tip from vibrating or rattling?
Secure mounting is the main defense against vibration. Use the recommended clamps or bolts and include any supplied rubber isolators or anti-rattle hardware. Properly tightened fasteners and a correctly sized inlet reduce movement at the joint and minimize noise during operation.
How We Chose the Best Infiniti QX60 Exhaust Tip
We focused on items that offer reliable fitment for the Infiniti QX60 and finishes that resist road wear. Primary evaluation criteria included fit accuracy to the QX60 tailpipe dimensions, construction material and corrosion resistance, attachment method and ease of installation, finish quality and longevity, and how the tip integrates with factory bumper clearances. We also considered whether a tip required welding versus bolt-on or clamp mounting, and whether the design preserved exhaust flow without creating interference. Options that required extensive modification or did not list QX60-specific fitment details were excluded. The final list favors tips that balance factory-like integration with improved styling and robust materials suitable for everyday use.
Our full evaluation process is outlined in our review methodology.
Conclusion
Selecting the right Infiniti QX60 exhaust tip comes down to balancing fitment, material, and mounting method. Prioritize tips that match the QX60 tailpipe diameter and offer corrosion-resistant construction to ensure a secure, long-lasting upgrade. Also weigh aesthetic goals against practicality: choose a finish and projection that complement the vehicle while maintaining proper clearance and heat management. That approach will help you get a durable, well-integrated result.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
