Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the exhaust tip on a 2019-present Ram 1500 is one of the simplest ways to refresh the truck's rear-end appearance and protect the tailpipe from corrosion. The right exhaust tip can change the visual stance, protect the factory pipe, and simplify cleaning without altering performance. This guide collects the top seven options for the Ram 1500 and explains why each type made the shortlist. Each selection below meets practical fitment expectations for the 2019-present Ram 1500 and was judged on material longevity, attachment method, and finish durability. You will also find guidance on choosing the right diameter, style, and installation approach for your cab and bed configuration. Read on for concise, truck-specific advice before the product details.
Looking for other parts? See all Ram 1500 parts & accessories.
Top Picks at a Glance
| Best Overall Exhaust Tip The best all‑around exhaust tip for most buyers and installs | TOTALFLOW 2192P Ram 1500 5" Polished Stainless Steel Double‑Wall Angle Cut Exhaust Tips (Set of 2) |  |
| Best Budget Exhaust Tip A low‑cost tip that improves looks without breaking the bank | Ywdiml Stainless Steel Bolt-On Exhaust Tip, 2.5" Inlet |  |
| Best Premium Exhaust Tip A higher‑end tip with top materials, fit, and finish | Mopar 5" Black Dual Exhaust Tips for Ram 1500 (DT) |  |
| Best Stainless Steel Exhaust Tip Durable corrosion‑resistant stainless construction for long service life | WESDON 304 Polished Stainless Steel Slant Exhaust Tip for Ram 1500 (2019–2024) |  |
| Best Carbon Fiber Exhaust Tip A lightweight, sporty finish that emphasizes performance styling | Bielpord Carbon Fiber Dual Outlet Exhaust Tip (2.5" Inlet) |  |
| Best Dual‑Wall Exhaust Tip Double‑wall construction for thicker appearance and cooler exterior | MBRP Armor BLK Dual-Wall Angle Cut Exhaust Tips, 5in OD (Pair) |  |
| Best Wide‑Diameter Exhaust Tip A large‑bore tip for a bold visual statement and deeper tone | B2 Fabrication 5" Stainless Steel Dual-Wall Exhaust Tips for Ram 1500 |  |
TOTALFLOW 2192P Ram 1500 5" Polished Stainless Steel Double‑Wall Angle Cut Exhaust Tips (Set of 2)
Best Overall Exhaust Tip
| Outlet Connection Size | 5 Inches |
|---|---|
| Compatible with Vehicle Type | Truck |
| Configuration | Center/Center |
| Material Type | Stainless Steel |
| Automotive Fit Type | Vehicle Specific Fit |
These TOTALFLOW 2192P tips are a direct-fit, clamp-on upgrade for Ram 1500 trucks with factory dual exhaust, offering a quick visual and acoustic improvement without permanent modification. Constructed from 304 stainless steel with a polished double-wall, angle-cut design, they cleanly enlarge the outlet to a 5-inch round finish that enhances the truck’s rear styling and deepens the exhaust note on Hemi and other compatible engines. Installation is straightforward for DIYers — reuse the factory clamps for a secure fit or add new hardware if desired — and the clamp-on approach keeps the job reversible. The polished finish resists corrosion and keeps the look bright in most conditions, though some users reported surface rust after long-term exposure and occasional visible seam placement on the inside lip. These tips are lightweight and intended primarily as a cosmetic and mild performance tune rather than a full exhaust system upgrade, so expect modest changes to flow and sound rather than dramatic power gains.
Best for: Buyers who want a simple, factory-style visual upgrade and a slightly deeper exhaust tone with a clamp-on install they can complete at home.
Less Ideal for: Drivers seeking large power gains or a full performance exhaust system should look at complete muffler or piping upgrades instead.
- Vehicle-specific fit for 2019–2024 Ram 1500 dual exhaust setups for a near-seamless installation
- 304 stainless steel construction with polished finish for corrosion resistance and durable appearance
- Clamp-on design allows quick, reversible installation without welding
- Double-wall, angle-cut 5" outlet enhances rear styling and deepens exhaust tone
- Some users noted surface rust on the lip after extended use in harsh conditions
Verdict: The best all‑around exhaust tip that balances fit, finish, durability, and style to suit most DIY installers and aftermarket upgrades.
Ywdiml Stainless Steel Bolt-On Exhaust Tip, 2.5" Inlet
Best Budget Exhaust Tip
| Installation Type | Bolt-On |
|---|---|
| Material Type | Stainless Steel |
This inexpensive stainless steel exhaust tip is a straightforward visual upgrade for owners who want a cleaner, brighter tailpipe without cutting or welding. It clamps over a 2.5-inch inlet using a screw connection, so installation requires only basic hand tools and can be completed in minutes. The chrome-plated finish lifts the rear-end appearance and the straight or subtly curved profile suits common pickup styling. Construction is thin-gauge stainless steel that resists light corrosion and small dents but some buyers report variability in thickness and fit, so alignment and tightening are important to prevent rattling. The tip does not change exhaust tone or performance and is not engineered for heavy-duty protection against road impacts or long-term road salt exposure. For a low cost this part delivers an easy cosmetic improvement and rapid DIY fitment, though finish and fitment consistency reflect its budget price.
Best for: Ram 1500 owners looking for the cheapest easy-to-install cosmetic upgrade for the tailpipe who prioritize appearance and low installation cost over longevity.
Less Ideal for: Do not choose this if you need a heavy-duty, impact-resistant tip or precise factory-match fit for a custom exhaust; look for thicker, vehicle-specific aftermarket parts instead.
- Very affordable way to improve the exhaust appearance
- Bolt-on screw clamp installs quickly with basic tools
- Chrome-plated stainless steel finish resists light corrosion
- Available straight or curved styles to match truck rear styling
- Thin material and inconsistent fit reported by some buyers
- Does not alter exhaust sound or provide heavy-duty protection
Verdict: The best low‑cost exhaust tip for buyers who want a noticeable visual upgrade and acceptable durability while keeping purchase and installation costs minimal.
Mopar 5" Black Dual Exhaust Tips for Ram 1500 (DT)
Best Premium Exhaust Tip
| Installation Type | Bolt-On |
|---|---|
| Compatible with Vehicle Type | Car |
| Shape | Round |
These Mopar 5-inch black dual exhaust tips are a factory-quality, bolt-on accessory intended to give 2019–2021 Ram 1500 DT trucks a refined, finished look at the tailpipe. As genuine Mopar parts they match factory fit and finish and install without modification when you confirm fitment with your VIN. The deep black finish and round 5-inch outlets deliver a showroom appearance and pair well with factory rear valances. Installation is straightforward for a DIYer or technician since the tips are designed as direct-fit replacements. Because these are cosmetic tips rather than performance parts, they do not alter exhaust flow or engine output but do resist road grime and deliver a long-lasting visual upgrade compared with cheaper universal tips. Buyers should confirm the exact DT body style fitment before ordering and expect a premium cost consistent with a genuine branded part.
Best for: Buyers who prioritize factory-quality appearance and long-term finish over budget options and want a direct-fit, vehicle-specific styling upgrade for their 2019–2021 Ram 1500 DT.
Less Ideal for: Shoppers seeking performance gains, louder exhaust tone, or a cheaper universal tip for a different vehicle should look elsewhere.
- Factory-branded part for consistent fit with Ram 1500 DT rear bumper openings
- Durable black finish that maintains a showroom appearance
- Direct bolt-on installation with no modification required when matched to VIN
- Large 5-inch round outlets provide a bold visual upgrade
- Cosmetic only and does not improve exhaust performance or sound
- Higher price than generic universal tips due to genuine Mopar branding
Verdict: The best premium exhaust tip for buyers willing to pay more for superior materials, refined machining, and a long-lasting showroom-quality appearance.
WESDON 304 Polished Stainless Steel Slant Exhaust Tip for Ram 1500 (2019–2024)
Best Stainless Steel Exhaust Tip
| Compatible Vehicle Type | Truck R-A-M |
|---|---|
| Installation Type | Direct Fit Replacement |
| Material Type | Stainless Steel |
| Tip Description | Rolle Edge Slant |
| Finish Type | Polished |
This WESDON exhaust tip is a vehicle-specific direct-fit replacement made from 304 stainless steel with a polished finish and rolled slanted edge. It installs onto the factory outlet of a Ram 1500 (2019–2024) and is intended to upgrade the tailpipe appearance while providing corrosion resistance compared with mild steel tips. Typical use is simple cosmetic enhancement and light protection of the exhaust outlet; installation requires measuring your existing pipe to confirm fit and then sliding and securing the tip to the factory tube. The 304 stainless construction and polished finish hold up well in wet and salty environments and need minimal maintenance to resist rust. Because it is a single-wall rolled-edge design, it improves looks but will not change exhaust tone or significantly alter performance. Buyers should confirm clearance and neck size before purchase since it is made for a direct-fit outlet and may not suit modified or oversized aftermarket exhausts.
Best for: Buyers focused on long-term corrosion resistance who want a low-maintenance, factory-style appearance upgrade for a 2019–2024 Ram 1500.
Less Ideal for: Those seeking a performance-oriented or sound-enhancing exhaust tip or owners with modified oversized exhaust outlets should consider other options.
- 304 stainless steel construction for strong corrosion resistance
- Vehicle-specific direct-fit design for straightforward installation on Ram 1500 (2019–2024)
- Polished finish and rolled slant edge for a clean, factory-quality appearance
- Single-wall construction provides aesthetic benefit but no change to exhaust sound or performance
Verdict: The best stainless steel exhaust tip for buyers who prioritize corrosion resistance and long-term durability in wet or salty conditions.
Bielpord Carbon Fiber Dual Outlet Exhaust Tip (2.5" Inlet)
Best Carbon Fiber Exhaust Tip
| Material Type | Carbon Fiber |
|---|---|
| Installation Type | Bolt-On |
| Compatible with Vehicle Type | Car |
| Inlet Size | 2.5" (approx. 62–64 mm) |
This carbon fiber finished dual exhaust tip bolts onto a 2.5-inch outlet and splits to dual 3.5-inch outlets to give a muscular, high-contrast rear-end appearance. Installation is simple: the clamp-style hardware lets you secure the tip to a properly measured 2.5" tailpipe without welding or cutting for a mostly tool-only fit. The carbon fiber sleeve and polished stainless steel body provide a factory-quality visual upgrade while protecting the end of the exhaust from road debris and corrosion. In real use it is primarily cosmetic; some owners report a slightly deeper tone but the tip does not change backpressure or power. Fit requires sufficient bumper clearance — the outlet width and overall length must clear the rear valance. The finish looks premium out of the box but long-term resistance to chips and fading will depend on mounting angle and exposure to road salt. For truck use on the specified Ram 1500 range, confirm your stock tailpipe diameter and measure bumper clearance before purchasing.
Best for: Buyers who want a lightweight, visually striking aftermarket tip that resists heat discoloration and upgrades the Ram 1500 rear appearance with a simple bolt-on installation.
Less Ideal for: Drivers seeking a performance exhaust component or those unwilling to measure and possibly trim for proper clearance should consider alternative upgrades or professional fitment.
- Carbon fiber outer sleeve and polished stainless steel core for a premium, high-contrast look
- Bolt-on clamp installation requires no welding and installs with basic hand tools
- Dual outlet design enhances rear-end appearance and can slightly deepen exhaust tone
- Protects exhaust tip from road debris and helps resist corrosion compared with bare pipe
- Requires correct tailpipe diameter and adequate bumper clearance so not universally plug-and-play
- Primarily cosmetic so it will not improve performance or materially change exhaust flow
Verdict: The best carbon fiber exhaust tip for buyers seeking a lightweight, high‑contrast styling element that stands out visually while resisting heat discoloration.
MBRP Armor BLK Dual-Wall Angle Cut Exhaust Tips, 5in OD (Pair)
Best Dual‑Wall Exhaust Tip
| Material Type | Stainless Steel |
|---|---|
| Inlet Diameter | 3 in. |
| Outer Diameter | 5 in. |
| Finish Type | Powder Coated |
| Style | Angle Cut |
These MBRP Armor BLK tips dress the rear end with a durable dual-wall design and a burnt black powder coat that resists heat and corrosion. They are engineered for a vehicle-specific fit and attach to a 3 inch inlet, expanding to a 5 inch outer diameter for a bolder outlet appearance; the angle cut provides a sporty, finished look. In everyday use they primarily serve as a cosmetic upgrade while slightly insulating the exterior surface from exhaust heat thanks to the dual-wall construction. The T304 stainless steel construction and factory-style coating improve longevity compared with plain-plated tips, and being sold in pairs ensures a matched appearance for dual-exit setups. Installation is typical for slip-on tips and may require clamps or welding depending on the existing pipe and desired permanence. These tips do not alter performance or sound in any meaningful way and buyers should confirm inlet diameter and fitment for their Ram 1500 before purchase.
Best for: Buyers seeking a durable, factory-style visual upgrade that reduces tip surface heat and gives the rear end a fuller look without changing sound or performance.
Less Ideal for: Drivers who want measurable exhaust performance gains, active sound tuning, or universal-fit tips for multiple vehicles should look elsewhere.
- Dual-wall T304 stainless steel construction reduces exterior heat transfer and increases durability
- Powder coated black finish resists high heat discoloration and corrosion
- Vehicle-specific fit and 3 inch inlet for straightforward slip-on installation
- 5 inch outer diameter and angle-cut design provide a bold, finished appearance
- Does not change exhaust sound or performance
- May require clamps or welding for a secure, permanent installation
Verdict: The best dual‑wall exhaust tip for buyers who want a fuller, more finished look with reduced exterior heat transfer and improved durability.
B2 Fabrication 5" Stainless Steel Dual-Wall Exhaust Tips for Ram 1500
Best Wide‑Diameter Exhaust Tip
| Material Type | Stainless Steel |
|---|---|
| Installation Type | Clamp-On |
| Tip Description | Angle Cut, Dual Wall |
| Compatible with Vehicle Type | Truck |
These B2 Fabrication 5-inch stainless steel tips are a straightforward way to give a 2019-present Ram 1500 a much bolder rear-end appearance and a touch deeper exhaust character from the larger outlet. They are TIG welded from 304 stainless and come as a pair with a dual-wall, angle-cut design that fills factory bumper openings and bolts on using the factory clamp locations for a direct fit. The large 5-inch diameter and dual-wall construction deliver the visual presence buyers want while the polished or black powdercoat finishes keep corrosion resistance and appearance longevity in typical road conditions. Installation is clamp-on so no welding is required, making them easy to fit at home or by a shop. Expect a modest change in exhaust tone rather than a dramatic performance gain since these are cosmetic tips rather than an exhaust system upgrade. Also the finish choice and clamp-on attachment mean careful tightening and occasional inspection will keep them secure and looking sharp.
Best for: Buyers who prioritize a dramatic visual upgrade and a slightly deeper exhaust note without modifying the exhaust system, and who want a simple bolt-on installation they can fit at home or have installed quickly.
Less Ideal for: Drivers seeking increased engine performance, significant sound change, or a welded permanent installation should consider full exhaust components or performance-focused upgrades instead.
- Large 5-inch dual-wall diameter provides a noticeable visual upgrade and fills factory bumper openings
- Made from TIG welded 304 stainless steel for corrosion resistance and lasting finish
- Direct bolt-on clamp-on installation uses factory clamp locations so no welding is required
- Available in polished or black powdercoat finish to match different styling preferences
- Changes to exhaust sound are modest because these are tips only and do not alter the exhaust system internals
- Clamp-on mounting requires periodic inspection to ensure clamps remain tight
Verdict: The best wide‑diameter exhaust tip for buyers who want a dramatic visual presence and slightly altered exhaust note from a larger outlet profile.
Choosing the Right 2019-Present Ram 1500 Exhaust Tip: Key Factors to Consider
Material and Corrosion Resistance
Material choice determines how well an exhaust tip withstands road salt, moisture, and exhaust condensation. Stainless steel resists rust and generally requires less maintenance, while cheaper plated steel can show pitting and flaking over time.
A robust finish like brushed or polished stainless helps preserve appearance with regular washing. Consider thicker-wall construction rather than thin stamped pieces; thicker metal tolerates heat cycles and road debris better and reduces the chance of dents or creases that accelerate corrosion.
Fitment and Inlet Diameter
Accurate inlet diameter and slip-fit range are essential for a secure attachment to the factory tailpipe. Tips that list a single inlet size or a clear clamp range make matching to the Ram 1500 tailpipe straightforward and reduce the chance of leaks or rattles.
Verify whether the tip is intended as a universal fit or engineered for a specific tailpipe geometry. Universal styles can work but may need shims or anti-rattle measures. Tips designed around common Ram 1500 pipe dimensions will save time and deliver a flush, factory-like appearance.
Attachment Method and Hardware
Bolt-on clamp systems, integrated set screws, and welded models each have pros and cons. Bolt-on clamps are reversible and simple for most owners, while set-screw designs can provide a neater look but require precise alignment and periodic checks.
Weld-on tips offer the most permanent fit but require professional work and remove easy reversibility. Check that all provided hardware is stainless or zinc-coated to avoid rapid corrosion at the fastening points, and look for included anti-rattle pads when available.
Tip Style and Finish
The visual style affects how the truck reads from the rear. Rolled-edge and slash-cut tips give a finished, OEM-like appearance, while larger-diameter rolled or slash tips create a more pronounced aftermarket look.
Finish choices include polished chrome-like stainless, brushed satin, and black-coated finishes. Choose a finish that complements the Ram 1500 trim level and existing exterior accents, and consider how visible the tip will be given your truck's bumper cutouts and ride height.
Diameter, Length, and Clearance
Outer diameter and tip length influence both aesthetics and practical clearance. Oversized tips can hit the bumper or diffuser on lowered or heavily loaded trucks, while very short tips can look undersized or allow exhaust staining of the bumper.
Measure the distance from the tailpipe exit to the bumper cutout and consider trailer towing or cargo that can change the truck's rear dynamics. Adequate clearance prevents heat damage to the bumper and ensures a proper exhaust flow path without contact.
Maintenance and Cleanability
Some finishes show soot and discoloration more readily than others and may require different cleaning routines. Polished stainless will show fingerprints and streaks but polishes back to a like-new look, while black-coated finishes may hide soot but can chip.
Consider how often you are willing to clean the tip and whether you want a finish that can be touched up. Also think about removable designs that make it easier to clean the factory tailpipe behind the tip, maintaining both appearance and corrosion prevention.
Matching Tip Style to Your Ram 1500 Trim
Different Ram 1500 trims and owner preferences call for distinct exhaust-tip styles. A subtle, polished rolled-edge tip suits higher-trim trucks that emphasize refined appearance, while larger dual-outlet tips can emphasize a sportier or more aggressive stance. Consider the existing rear bumper cutout and how much of the tip will be visible when the truck is parked or towing.
- Rolled-edge for discreet, factory-leaning look
- Slash-cut or trumpet styles for aggressive visual impact
- Dual tips for symmetry on trucks with dual exhaust or paired styling accents
Preparing Your Truck for Installation
Before installing an exhaust tip, park on level ground, allow the exhaust to cool, and inspect the factory tailpipe for rust, dents, or obstructions. Clean the tailpipe surface with a wire brush and a degreaser so the tip seats tightly. If you plan to clamp rather than weld, measure and mark the orientation to ensure the tip sits square and centered.
- Measure inlet diameter and visible clearance to the bumper
- Clean and de-grease the tailpipe surface
- Have basic hand tools and anti-seize or thread locker ready
When to Choose Bolt-On Vs Weld-On Tips
Bolt-on tips are the most common choice for Ram 1500 owners because they are reversible, require only basic tools, and are easier to align. Look for models with integrated clamps or heavy-duty U-bolts and stainless fasteners to reduce corrosion. Weld-on tips provide a permanent, tamper-free solution and can eliminate any chance of slippage, but they require a skilled welder and make future changes more difficult.
- Bolt-on: reversible, DIY-friendly, check hardware corrosion resistance
- Weld-on: permanent fit, professional installation needed
- Set-screw types: clean look but need periodic torque checks
Keeping the Tip Looking New
Regular cleaning extends the life of the finish and reduces abrasive buildup that can trap moisture. Use nonabrasive metal polishes on stainless surfaces, and avoid harsh chemicals on coated finishes to prevent fading. For black-coated tips, inspect regularly for chips and touch up with a suitable high-temperature coating if needed.
- Wash with mild soap and water then dry to avoid water spots
- Use metal polish for stainless surfaces and a microfiber cloth
- Inspect fasteners and anti-rattle components at routine service intervals
Still looking for the perfect fit?
Select your Ram 1500 configuration to see the most relevant Exhaust Tips recommendations
How We Chose the Best 2019-Present Ram 1500 Exhaust Tip
We focused on attributes that matter specifically to Ram 1500 owners when choosing exhaust tips. First, fitment and inlet diameter compatibility were prioritized to ensure straightforward installation on the common factory tailpipe diameters found across 2019-present Ram 1500 models. Second, material and finish durability were evaluated to reduce corrosion risk and maintain appearance in road salt and moisture-prone environments. Third, attachment method was considered, favoring options that provide secure mounting—whether bolt-on clamps, set-screw designs, or slip-fit styles—with minimal modification. We also weighed aesthetic options such as single versus dual outlets and tapered versus rolled edges to match different trim levels and owner preferences. Ease of installation and the need for basic tools were important factors, as most owners prefer a fast bolt-on job. Finally, we excluded tips designed only for custom fabrication or those requiring welding unless explicitly marketed as factory-replacement fitments. The resulting list balances real-world durability, ease of installation, and clean visual upgrade for the Ram 1500.
Our full evaluation process is outlined in our review methodology.
FAQ
Will adding an aftermarket exhaust tip change my Ram 1500's performance?
An exhaust tip alone usually has negligible effect on engine performance. Tips primarily change appearance and may slightly alter exhaust tone if they change backpressure or include resonated designs, but basic bolt-on tips do not affect power.
How do I measure my tailpipe to pick the right tip size?
Measure the outside diameter of the tailpipe where the tip will slip on, and note any reducer or flare. Also measure clearance to the bumper and how much overhang you want so the tip does not contact bodywork.
Can I install a bolt-on exhaust tip myself?
Yes. Most bolt-on tips use clamps or set screws and can be installed with common hand tools. Ensure the exhaust is cool, the tailpipe is clean, and hardware is torqued to the manufacturer specification to avoid loosening.
Are black-coated tips more maintenance-free than polished stainless?
Black-coated tips can hide soot better but may chip and reveal metal underneath. Polished stainless resists corrosion and can be restored with polish, but it shows dirt and fingerprints more readily. Choice depends on desired look and maintenance preferences.
Will a larger-diameter tip cause bumper heat damage?
A larger-diameter tip by itself is unlikely to cause heat damage if clearance is correct. However, tips that direct hot gases toward the bumper or sit too close can transfer heat. Maintain adequate gap and check under load or towing conditions.
Do bolt-on tips require periodic re-tightening?
Bolt-on tips can loosen slightly over time due to vibration and thermal cycling. It is good practice to inspect and re-torque fasteners after the first few hundred miles and during regular maintenance checks.
Final Verdict
For most 2019-present Ram 1500 owners, prioritize a stainless steel or similarly corrosion-resistant finish, accurate inlet sizing, and a secure bolt-on attachment to balance longevity and ease of installation. Decide on a style that complements your truck's trim and ensure adequate clearance to avoid bumper contact or heat transfer. If you want a reversible, low-effort upgrade, a well-made clamp-on tip is the practical choice; choose weld-on only if you need a fully permanent solution and have access to professional welding. Focus on material, fitment, and hardware quality to make a confident selection that enhances both appearance and durability.
Explore More:
- Check out all Ram 1500 parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
