Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing worn or failing calipers can have a direct impact on braking performance, pedal feel, and safety. You want calipers that fit correctly, resist corrosion, and actuate smoothly so braking remains predictable in daily driving and tougher conditions. This guide narrows the field to a shortlist of top options for the Infiniti QX60 and explains the key features that matter when selecting calipers. Below you will find our top picks and the evaluation criteria used to choose them.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | KAX Disc Brake Caliper Assembly (Rear Side, set of 2) |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Rear Disc Brake Calipers with Ceramic Pads (4‑Piece Kit) |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Rear Brake Kit with Rotors, Ceramic Pads and Calipers |  |
| Best Budget The cheapest option that still gets the job done reliably | Power Stop L6037 Rear Right Replacement Brake Caliper |  |
| Most Sold A high-volume bestseller chosen again and again | TRQ Rear Brake Pad, Rotor and Caliper Kit (Rear) for Infiniti QX60 |  |
| Best Value for Money The sweet spot between price and what you get | A-Premium Rear Right Disc Brake Caliper Assembly for Infiniti QX56/QX60 Compatible Models |  |
| Best Overall The best all-around choice for most situations | TRQ Performance Front Drilled & Slotted Brake Rotor Set |  |
1. KAX Disc Brake Caliper Assembly (Rear Side, set of 2)
| Fitment | Infiniti QX56 2004-2010 / Nissan Armada 2005-2015 / Titan 2004-2015 (rear side, 5.6L V8 listed) |
|---|---|
| Includes | Brake caliper, phenolic piston, installation hardware |
| Testing | 100% pressure tested |
This KAX caliper assembly is a direct-fit replacement intended for the rear side of compatible Infiniti QX56/QX60-era vehicles and similar Nissan/V8 platforms. It ships as a complete caliper unit with a phenolic piston and installation hardware so you can replace a seized or leaking caliper without sourcing extra parts. Buyers will appreciate that each caliper is pressure tested and marketed as matching factory fitment, which simplifies installation and helps restore pedal feel and braking balance. Included hardware and a caliper hanger in some packages reduce install trips and parts hunting. Limitations to note are that these are aftermarket assemblies rather than factory-made units, so finish and long-term corrosion resistance can vary between batches, and some installers reported needing to re-use or recondition existing bolts during mounting. For a reliability-focused buyer replacing worn rear calipers on the Infiniti QX60 family, this offers a practical, serviceable option that gets the vehicle back on the road quickly.
Best for: Reliability-focused buyers who prioritize restoring safe, predictable braking on their Infiniti QX60 and prefer a direct replacement that minimizes time and parts sourcing.
Less Ideal for: Buyers seeking a factory-manufactured caliper with guaranteed OEM finish longevity or those wanting upgraded performance calipers with different materials and coatings.
- Complete assembly with phenolic piston and installation hardware included for straightforward replacement
- Pressure tested to ensure functional sealing and braking operation out of the box
- Multiple reviews report correct fit and reduced installation complexity
- Aftermarket build and finish may show variability in long-term corrosion resistance
- Some users needed to re-use or modify original fasteners during installation
Verdict A practical, pressure-tested aftermarket rear caliper set that reliably restores braking on compatible Infiniti QX60-era vehicles while keeping installation simple.
2. Detroit Axle Rear Disc Brake Calipers with Ceramic Pads (4‑Piece Kit)
| Position | Rear |
|---|---|
| Piston Size | 1.68 in. / 42.75 mm |
| Piston Material | Steel |
| Kit Includes | 2 calipers + 2 ceramic pads |
This Detroit Axle kit supplies two rear disc brake calipers and two ceramic brake pads as a ready-to-install set for rear braking service. It is intended for convenience-minded owners who want a single kit that includes caliper brackets and the pads matched to the calipers, so you replace the caliper and friction material in one job rather than sourcing parts separately. The calipers use a single steel piston per side and are pressure-tested for leak-free operation. Ceramic pads give quieter operation and lower dust than semi-metallic pads in everyday driving. Practical benefits include straightforward swap-in fitment for the listed models, factory-style mounting hardware included, and a 10-year warranty for peace of mind. Limitations are that ceramic pads are not performance-oriented for aggressive driving or heavy towing and installation may require attention to directional rotor orientation and pin/hardware placement for proper assembly. Expect a practical, maintenance-focused upgrade rather than a performance braking overhaul.
Best for: Drivers who prioritize convenience and want a single, ready-to-install rear caliper and pad kit that reduces shopping and simplifies a routine brake service.
Less Ideal for: Drivers who require high-friction, track-capable braking or those who regularly tow heavy loads should choose purpose-built performance or heavy-duty brake components instead.
- Complete rear kit with matched calipers and pads for a one-stop replacement
- Calipers pressure-tested to help ensure leak-free operation
- Includes caliper brackets and required mounting hardware for easier installation
- Ceramic pads provide quieter stops and reduced wheel dust compared with many semi-metallic pads
- Ceramic pads are not intended for high-performance or heavy-towing applications where higher friction compounds are needed
- Hardware packaging and labeling can be a little confusing during install
Verdict A practical, all-in-one rear caliper and ceramic pad kit that simplifies brake replacement for convenience-focused Infiniti owners, but not meant for performance or heavy-duty use.
3. Detroit Axle Rear Brake Kit with Rotors, Ceramic Pads and Calipers
| Compatible vehicles | Selected Infiniti QX60 and other listed Infiniti models |
|---|---|
| Kit contents | 2 rear rotors, 2 rear ceramic pads, 2 rear calipers |
| Rotor diameter | 12.13 inch (308 mm) |
This Detroit Axle rear brake kit supplies the core components needed to rebuild the rear brakes on compatible Infiniti models: rotors, ceramic pads, and replacement calipers. It is intended for bolt-in replacement use and is typically installed as a paired kit during a rear brake service to restore stopping power and pedal feel. Notable features include matched rotors and ceramic pads plus included calipers so you do not need to reuse worn hardware. Buyers will appreciate the kit approach for a one-stop installation and the brand’s claimed testing to meet or exceed factory-spec fit and finish. Practical benefits include straightforward fitment for the listed Infiniti applications and fewer sourcing headaches versus buying parts separately. Limitations are that this is an aftermarket kit rather than a factory part so finish and long-term durability can vary with driving style, and buyers who need premium performance or track-rated braking may prefer higher-end brands or performance rotors and pads. The kit appears targeted at routine replacement and performance-oriented daily driving rather than motorsport use.
Best for: Performance-oriented Infiniti owners who prioritize restoring confident daily driving braking with a matched rear kit and prefer a single-purchase solution over sourcing individual parts.
Less Ideal for: Drivers seeking track-capable or premium performance braking upgrades should consider performance rotors, upgraded caliper options, or specialty brake brands instead.
- Complete rear kit includes rotors, ceramic pads and calipers for a single purchase and install.
- Designed to match factory fit and finish for the specified Infiniti rear brake application for simpler installation.
- Ceramic pads reduce typical brake noise and produce moderate dust compared with some semi-metallic compounds.
- Aftermarket construction means variability in long-term durability compared with higher-end or OEM parts.
- Not intended as a motorsport or heavy-duty upgrade for demanding track use.
Verdict A convenient matched rear brake kit that restores factory-style braking for supported Infiniti models, best for performance-minded daily drivers rather than track-focused upgrades.
4. Power Stop L6037 Rear Right Replacement Brake Caliper
| Position | Rear Right |
|---|---|
| Model | L6037 |
| Manufacturer | Power Stop |
| Exterior | Machined |
This Power Stop L6037 rear right caliper is a stock-replacement unit designed to restore braking function on compatible Infiniti models, including the QX60. It installs as a bolt-on replacement using the factory mounting points and comes with the common caliper hardware such as seals, guide pins, dust boots, bleeder screw, and mounting pieces for a straightforward swap. The caliper is pressure tested and machined for a factory-quality appearance and aims to return pad contact and braking feel to like-new condition without modifying the vehicle. For a budget-conscious buyer the main benefit is getting a complete caliper assembly that reduces labor time versus rebuilding, and the included hardware simplifies installation. Limitations are the short 90-day / 3,000-mile warranty and fewer premium finishes or performance features compared with higher-end or performance calipers, so it is best for routine replacement rather than performance upgrades.
Best for: Budget-conscious Infiniti QX60 owners who prioritize restoring reliable braking with a straightforward, vehicle-specific replacement and minimal installation hassle.
Less Ideal for: Drivers seeking performance upgrades, enhanced cooling, or long-term warranty coverage should consider higher-end or upgraded caliper options instead.
- Direct bolt-on replacement designed for vehicle-specific fitment to simplify installation
- Includes necessary caliper hardware like seals, guide pins, dust boots and bleeder screw for a complete swap
- Pressure tested and machined finish for reliable basic braking performance
- Limited 90-day / 3,000-mile warranty compared with longer manufacturer coverage
- Not a performance or upgraded caliper so no additional stopping power or heat management features
Verdict A cost-effective, vehicle-specific rear right replacement caliper that restores factory-style braking for the QX60 with minimal fuss but without performance upgrades.
5. TRQ Rear Brake Pad, Rotor and Caliper Kit (Rear) for Infiniti QX60
| Fitment | Rear for Infiniti QX60 |
|---|---|
| Kit contents | Rear ceramic pad set, 2 rear calipers, 2 G-coated vented rotors |
| Rotor finish | Electrostatic G-coating |
| Pad type | Ceramic molded |
This TRQ rear brake kit supplies everything needed to service the rear brakes on an Infiniti QX60: a pair of premium G-coated vented rotors, a rear ceramic pad set and two replacement rear calipers. It is sold as a direct-fit, vehicle-specific kit intended for DIYers or shops replacing worn rotors, pads and seized or leaking calipers at the same time. The ceramic pads are molded to reduce dust while the electrostatic coating on the rotors aims to slow surface rusting, which helps keep wheels cleaner between services. Pre-assembled calipers reduce installation fiddliness and TRQ provides online DIY videos to guide the process. Buyers should plan to follow a proper bedding-in procedure after installation and expect some variability in caliper quality based on user reports. This kit simplifies a full rear brake job and is a practical choice when you want matched components and minimal sourcing hassle, but it still requires basic brake knowledge or a mechanic for safe installation and proper bleeding of the system.
Best for: Practical, risk-averse buyers who prioritize a direct-fit, ready-to-install rear brake solution for their Infiniti QX60 and prefer the convenience of a matched kit backed by installation guidance.
Less Ideal for: People seeking high-performance or track-oriented brake upgrades or those who want to reuse existing factory calipers and only replace pads or rotors separately.
- Complete rear kit includes pads, rotors and calipers for a single installation
- Ceramic pads molded to produce less brake dust for cleaner wheels
- Electrostatic G-coating on rotors provides corrosion resistance for longer surface life
- Pre-assembled calipers and vehicle-specific fit reduce modification and install time
- Some buyers reported a defective caliper in isolated cases
- Requires proper bedding and brake-bleeding procedures after install to ensure performance
Verdict A convenient, vehicle-specific rear brake kit for Infiniti QX60 owners who want matched pads, rotors and calipers in one purchase, suitable for routine replacement rather than high-performance use.
6. A-Premium Rear Right Disc Brake Caliper Assembly for Infiniti QX56/QX60 Compatible Models
| Vehicle fitment note | Rear side, fits specified Infiniti models with V8 5.6L |
|---|---|
| Brake piston count | 1 Piston |
| Inlet port size | M10 x 1.0 |
| Bleeder port size | M10 x 1.0 |
This A-Premium rear disc brake caliper is sold as a direct replacement assembly for compatible Infiniti rear applications and arrives preassembled with phenolic piston and installation hardware. It is intended for use when a worn or leaking rear caliper needs swapping rather than a full axle upgrade. Key features include a single piston design, M10 x 1.0 inlet and bleeder ports, and a zinc coating to resist corrosion. In practice the caliper bolts into the factory location and accepts standard pads and rotors for the listed vehicles, and several users report straightforward installation and reliable stopping performance. Fitment can vary between aftermarket batches, so expect to verify mounting alignment and bleed the system during installation. The product carries a one-year unlimited-mileage guarantee from the maker, but it is an aftermarket part rather than a factory unit, so finish and hole-location tolerances may not match OEM exactly in every case.
Best for: Practical optimizers seeking an affordable, ready-to-install rear caliper replacement for an Infiniti that balances cost and function rather than pursuing OEM restoration.
Less Ideal for: Buyers wanting exact factory-original components for concours-level restoration or fleet operators who need guaranteed identical fitment across large numbers of vehicles.
- Built and supplied as a complete caliper assembly with phenolic piston and mounting hardware for straightforward replacement
- Zinc coating on the caliper body for improved corrosion resistance in typical road conditions
- Direct-fit replacement for the listed rear Infiniti applications when vehicle and engine match the listing
- Includes correctly sized inlet and bleeder ports (M10 x 1.0) to match common brake line fittings
- Aftermarket fitment has occasional variance so some units may require extra fitting or adjustment
- Not a factory-original unit so finish and tolerances may differ from factory-quality parts
Verdict A budget-friendly, ready-to-install rear caliper for compatible Infiniti rear applications that delivers practical performance but may require careful fit verification before installation.
7. TRQ Performance Front Drilled & Slotted Brake Rotor Set
| Brand | TRQ |
|---|---|
| Material | Cast Iron |
| Exterior Finish | Machined |
| Automotive Fit Type | Vehicle Specific Fit |
These TRQ Performance front rotors are a direct-fit, vehicle-specific replacement designed to install in place of factory front rotors on compatible Infiniti models. They are drilled and slotted to help disperse heat and brake gases, and come with a G-coated rust-preventative finish and a non-directional machined surface intended to reduce vibration. Typical use is as a paired front rotor upgrade for wear-worn factory discs or when replacing pads. The coated finish and G3000 casting aim to slow surface corrosion and extend service life, while the drilled and slotted pattern can improve fade resistance during heavier use. Buyers should expect OEM-style stopping performance rather than a dramatic performance leap, and some pad combinations may produce more noise until the coating is worn in. Confirm fitment for the Infiniti QX60 before purchase because fitment accuracy is critical for a direct-replacement rotor. These rotors are a practical balance of value, corrosion protection, and aftermarket styling for owners looking to refresh front braking components without modifying the brake system.
Best for: Balanced all-round buyers who want a reliable, factory-replacement style front rotor for routine driving and occasional spirited use, prioritizing longevity and straightforward installation.
Less Ideal for: Drivers seeking a dedicated performance or track rotor with maximum fade resistance and lightened construction should consider purpose-built aftermarket options instead.
- Vehicle-specific direct replacement simplifies installation and fitment.
- G-coated finish reduces surface rust and keeps rotors looking newer longer.
- Drilled and slotted faces help dissipate heat and reduce gas build-up under repeated heavy braking.
- Non-directional machined surface is intended to lower vibration and pedal judder.
- Manufacturer provides DIY installation videos to assist owners replacing rotors themselves.
- Coating may require an initial bedding-in period and can cause temporary noise with some pad materials.
- Not a performance rotor upgrade over high-end aftermarket or track-focused discs.
- A few users reported occasional fitment problems so fitment verification is essential.
Verdict A value-focused, coated drilled-and-slotted front rotor set that refreshes braking performance and resists rust while staying close to factory behavior.
Choosing the Right Infiniti QX60 Brake Calipers: Key Factors to Consider
Fitment and Mounting
Correct fitment ensures the caliper bolts up with the same alignment and clearance as the original equipment, preventing uneven pad wear and interference with rotors. Verify bolt spacing, bracket design, and bleed port orientation so the caliper installs without modifying brake lines or hardware. Proper mounting also preserves rotor-to-pad contact pattern and rotor runout tolerances, which affects vibration and pedal feel.
Calipers designed specifically for the Infiniti QX60 reduce the risk of installation errors and maintain factory brake geometry. If a caliper requires an adapter or different brackets, factor that into labor and potential alignment checks after installation.
Materials and Corrosion Protection
Calipers are exposed to moisture, road salt, and debris, so the base material and surface treatment influence longevity. Cast iron is common for strength, while aluminum offers weight savings; however, protective coatings and plating are critical regardless of base metal. Look for durable paints, powder coatings, or zinc plating that resist flaking and undercutting.
Sealed piston areas and treated sliding surfaces help prevent corrosion-related seizure. Corrosion protection reduces the chance of frozen guide pins and pitted pistons, which can cause uneven braking and increased pad wear over time.
Piston and Seal Design
Piston size, number, and seal quality determine how force is transmitted to the brake pads and how the caliper retracts after braking. High-quality seals resist swelling and cracking from heat and fluid exposure, maintaining consistent pad clearance and limiting drag. Multi-piston designs can provide more even pressure across the pad but must match rotor and pad specifications for proper contact.
Reliable seal and piston assemblies also make maintenance easier because they are less likely to leak or require frequent rebuilds. Consider the availability of replacement seals or a rebuild kit when planning long-term maintenance.
Heat Management and Brake Fade Resistance
Calipers must dissipate heat generated during braking to avoid fade and fluid boiling. Larger piston areas and robust mounting can help spread heat, while materials and coatings influence thermal transfer. Designs that promote airflow around the caliper and minimize heat soak into the brake fluid help maintain performance on repeated stops.
For drivers who tow or carry heavy loads, prioritize calipers with proven heat-handling characteristics and service parts rated for high-temperature operation to reduce the risk of diminished braking under stress.
Serviceability and Parts Availability
Ease of maintenance affects ownership costs and downtime. Calipers that accept readily available pads, pistons, seals, and mounting hardware simplify repairs. Look for models with replaceable guide pins, accessible bleeder valves, and documented rebuild procedures.
Availability of rebuild kits and clear instructions reduces long-term expense and environmental waste by allowing refurbishment rather than full replacement. Also consider whether mounting hardware and brake line connections use standard fittings or require specialty adapters.
Noise, Vibration, and Harshness (NVH) Control
A caliper's ability to hold pads securely and allow even retraction influences noise and vibration. Properly engineered pad retention, anti-rattle features, and consistent piston return reduce squeal and chatter. Uneven pressure or loose hardware can lead to pulsation perceived through the pedal or steering wheel.
Selecting calipers with thoughtful NVH mitigation improves perceived quality and reduces the need for additional noise-damping shims or modifications. When noise is a primary concern, prioritize designs that emphasize secure pad seating and smooth piston movement.
FAQ
How do I know if an Infiniti QX60 caliper needs replacing?
Common signs include a soft or sinking brake pedal, uneven pad wear, a vehicle pulling to one side when braking, or visible leaks around the caliper piston. You may also notice reduced braking efficiency or unusual noises during braking. A visual inspection for corrosion, seized pistons, or damaged bleeder valves can help confirm the issue.
Can I use remanufactured calipers on an Infiniti QX60?
Remanufactured calipers are often a viable option if they are rebuilt to OEM tolerances and include new seals, pistons, and hardware where needed. Ensure the remanufactured unit specifies compatibility with the Infiniti QX60 and comes with clear documentation of the restoration process. Availability of a warranty and replacement seals adds confidence in long-term reliability.
Is it better to rebuild a caliper or replace it entirely?
Rebuilding can be cost effective when the caliper body is structurally sound and replacement seals, pistons, and hardware are available. However, if the caliper has extensive corrosion, warped surfaces, or damaged mounting points, full replacement is usually the safer choice. Consider labor complexity and whether you have access to proper tools for rebuilding and bench bleeding.
Do front and rear calipers differ for the Infiniti QX60?
Yes. Front and rear calipers typically differ in piston size, mounting configuration, and hardware to match braking demands and parking brake integration. Always confirm whether a caliper is intended for the front or rear of the Infiniti QX60 to ensure correct fit and function.
What maintenance helps extend caliper life?
Regular inspection and cleaning, replacing seized or corroded guide pins, and using high-quality brake fluid with scheduled fluid changes help preserve caliper function. Addressing minor leaks and replacing worn seals early prevents contamination and piston damage. Keeping rotors and pads in good condition also reduces uneven loading on calipers.
Will replacing calipers affect brake balance or ABS systems?
When calipers are properly matched for the Infiniti QX60 and installed with correct bleeding procedures, they should not adversely affect brake balance or ABS function. It is important to follow manufacturer-recommended bleeding and torque specs and to use compatible brake fluid. If you experience warning lights or unusual behavior, recheck installation and hydraulic connections.
How We Chose the Best Infiniti QX60 Brake Calipers
We focused on fitment and functional reliability specific to the Infiniti QX60, only considering calipers engineered or specified to match the vehicle's original mounting and hydraulic interfaces. Durability was judged by construction materials and surface treatments that reduce corrosion and wear in humid and road-salt environments. Hydraulic performance and piston seal quality were evaluated for consistent actuation, even heat distribution, and resistance to sticking. Serviceability mattered as well, so we prioritized designs that accommodate common brake pad sizes and hardware and that are compatible with standard brake fluid and maintenance procedures. We excluded generic universal-fit or unbranded units that lack clear specifications for the Infiniti QX60, as well as any options without reproducible manufacturing tolerances or without appropriate mounting and bleed port details. Finally, we considered warranty support and availability of rebuild or service parts to ensure long-term maintenance options.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right calipers for an Infiniti QX60 comes down to fitment accuracy, corrosion resistance, piston and seal quality, and long-term serviceability. Prioritize units that match the vehicle's mounting and hydraulic interfaces and that offer durable finishes and available rebuild parts. Balance priorities such as heat management and NVH control against maintenance considerations. A well-chosen caliper will restore consistent pedal feel and braking performance while minimizing future service and unexpected issues.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Brake System
- Browse all Auto Parts
