Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading to a black exhaust tip is one of the simplest ways to refine the look of your Toyota Tacoma without major modifications. The right black tip should complement your truck s styling, fit your tailpipe size, and hold up to road salt, heat, and daily use. This guide presents seven carefully shortlisted black exhaust tips that balance finish quality, mounting approach, and longevity for the Tacoma.Below you will find concise evaluations of the top options, plus practical advice on fitment, mounting choices, and finish durability so you can pick the best tailpipe trim for your Tacoma.
Looking for other parts? See all Toyota Tacoma parts & accessories.
Top Picks at a Glance
| Best Overall Exhaust Tip The best all-around black exhaust tip balancing style and function | Toyota Genuine Parts Black Exhaust Tip (PT932-35180-02) |  |
| Best Budget Exhaust Tip A low-cost black tip that improves looks without breaking the bank | VekAuto Black Stainless Steel Exhaust Tip for Toyota Tacoma (2.8" Inlet, 3.54" Outlet) |  |
| Best Premium Exhaust Tip A higher-end black tip with superior materials and finish quality | MZS Stainless Steel Exhaust Tip PT932-35180-02 for Tacoma |  |
| Best Clamp-On Exhaust Tip A clamp-on design for simple, no-weld installation and removal | TriTrust 6" Black Powder-Coated Clamp-On Exhaust Tip (fits 2"–2.75" inlet) |  |
| Best Dual-Wall Exhaust Tip A dual-wall construction that hides soot and resists heat discoloration | Rough Country Black Dual-Wall Exhaust Tip (2.5–3") |  |
| Best Stainless Steel Exhaust Tip Stainless construction under a black finish for corrosion resistance | Icyfond Adjustable Stainless Steel Black Exhaust Tip (2.75–3" Inlet) |  |
| Best Angle-Cut Exhaust Tip An angled-cut style for a sporty, aggressive exhaust appearance | A-KARCK Black PVD Angle-Cut Exhaust Tip, 2.5" Inlet to 4" Outlet |  |
Toyota Genuine Parts Black Exhaust Tip (PT932-35180-02)
Best Overall Exhaust Tip
| Installation Type | Bolt-On |
|---|---|
| Automotive Fit Type | Vehicle Specific Fit |
| Included Components | Exhaust Tip |
| Brand Name | Toyota |
This genuine Toyota black exhaust tip is a simple bolt-on accessory that improves the look of the Tacoma's tailpipe without changing sound or performance. It slips over the existing pipe and secures with hardware for a quick 5-minute DIY install in most cases, and the vehicle-specific fit reduces the fuss of measuring or modifying the outlet. The finish is factory-quality and bears a subtle etched Toyota logo for an understated, OEM appearance. Because it is a dress-up part only, expect no change in exhaust tone or flow, and long-term durability will depend on climate and road conditions though reviews indicate a generally solid finish. The tip adds about two inches of visible extension and a diagonal-cut opening that gives a cleaner, more finished rear-end look. If you want a no-fuss, factory-matching upgrade that installs quickly and keeps a stock aesthetic, this tip delivers; if you need performance gains or a louder exhaust, this is not the part for that.
Best for: Buyers who prioritize a factory-quality, low-effort visual upgrade for their Tacoma and want a part that installs quickly with a clean OEM appearance.
Less Ideal for: Drivers seeking louder exhaust, improved flow, or performance-focused modifications should choose a performance-oriented tip or full exhaust upgrade instead.
- Vehicle-specific bolt-on fit minimizes installation adjustments
- Factory-quality black finish with subtle Toyota logo for an OEM look
- Very quick and simple DIY installation
- Does not alter exhaust sound or performance, preserving factory characteristics
- Cosmetic only and offers no performance or sound improvement
- Durability over many years in harsh conditions is not guaranteed
Verdict: The best overall black exhaust tip combines a durable finish, correct fit, attractive styling, and easy installation to suit most DIY mechanics looking to upgrade exhaust appearance.
VekAuto Black Stainless Steel Exhaust Tip for Toyota Tacoma (2.8" Inlet, 3.54" Outlet)
Best Budget Exhaust Tip
| Compatible vehicles | Toyota Tacoma 2005-2023 |
|---|---|
| Material | Stainless Steel |
| Inlet size | 2.8" |
| Outlet size | 3.54" |
| Overall length | 8.5" |
This VekAuto exhaust tip is a low-cost way to change the look and sound of a Tacoma exhaust without cutting or welding. It slips over a 2.8 inch tailpipe and secures with the included screws, so installation is usually a few minutes with basic tools. The black stainless steel finish gives a darker, sportier appearance and can slightly alter exhaust tone and perceived noise. Reviews and the product description suggest fitment is close for many midsize truck tailpipes but some installations may need a short spacer to position the tip exactly where you want it. Expect acceptable corrosion resistance for the price, but the painted black coating may show wear over time from heat and road exposure compared with higher-end plated tips. This is a straight cosmetic accessory, not a performance part, and sold as an aftermarket replacement designed for easy bolt-on installation rather than long-term, heavy-duty use.
Best for: Buyers looking for the cheapest way to darken and tidy the exhaust tip on a Tacoma, who prioritize low upfront cost and easy DIY fitment over long-term finish longevity.
Less Ideal for: If you want a lifetime cosmetic finish or a tip engineered for sound or performance changes, consider higher-end plated or welded options instead.
- Designed to fit Toyota Tacoma 2005–2023 for straightforward compatibility
- Quick, no-cut installation using set screws
- Black stainless steel finish improves rear-end appearance
- Outlet size and length provide visible styling without major modifications
- Painted black finish may fade or chip with prolonged heat and road exposure
- Not engineered to increase performance or change emissions
Verdict: The best budget black exhaust tip offers acceptable materials and finish for cosmetic upgrades at a very low price, ideal for shoppers prioritizing cost over long-term durability.
MZS Stainless Steel Exhaust Tip PT932-35180-02 for Tacoma
Best Premium Exhaust Tip
| Fitment | 2005-2023 Tacoma |
|---|---|
| Material | 304 Stainless Steel |
| Outlet | 3.54 Inches |
| Overall Length | 8.46 Inches |
| Finish | Black Chrome |
This MZS exhaust tip is a premium-feel bolt/clamp-on tailpipe replacement designed to match the factory outlet on 2005–2023 Tacoma models. Made from 304 stainless steel with a polished black-chrome finish and a rolled, CNC-angled cut edge, it improves rear-end aesthetics while resisting high heat and corrosion better than thin stamped tips. Installation is straightforward and typically requires no cutting or welding, so it is an easy DIY upgrade that comes with clamps. In use the thicker stainless construction should hold up to road exposure and reduce visible wear compared with cheaper plated tips, though some users report discoloration under extreme exhaust temperatures and heavy-duty applications. The 3.54-inch outlet and 8.46-inch overall length are sized to replace the factory tailpipe part number referenced by the manufacturer, and the part is offered as a direct-replace option for a factory-like fit. If you want a durable, refined black exhaust finish that installs quickly and looks factory-matched on a Tacoma, this tip delivers that upgrade.
Best for: Buyers who prioritize a long-lasting, factory-style black finish and thicker stainless construction for a Tacoma aesthetic upgrade and are willing to pay for a more durable tip.
Less Ideal for: People looking for an inexpensive, purely cosmetic tip for heavy industrial or extremely high-temperature diesel applications should consider a welded or specialty high-temp option instead.
- 304 stainless steel construction for improved corrosion and heat resistance
- Black-chrome polished finish and CNC-angled rolled edge for refined, factory-matched appearance
- Bolt/clamp-on direct replacement that installs without cutting or welding
- Sized to match the referenced factory outlet for straightforward fitment
- May discolor under unusually high exhaust gas temperatures over time
Verdict: The best premium black exhaust tip delivers top-tier materials, thicker construction, and a long-lasting finish for buyers willing to pay more for durability and refined appearance.
TriTrust 6" Black Powder-Coated Clamp-On Exhaust Tip (fits 2"–2.75" inlet)
Best Clamp-On Exhaust Tip
| Fitment inlet diameter | 2"–2.75" |
|---|---|
| Length | 6 inch |
| Outlet diameter | 3.5 inch |
| Material | Stainless Steel |
| Finish | Black Powder Coated |
This TriTrust clamp-on exhaust tip provides a simple way to change the look of a Tacoma's tailpipe without welding. It slips over 2.0–2.75 inch factory tailpipes and secures with the included clamp and screws, so installation is a quick DIY job using basic hand tools. The double-wall stainless steel construction with black powder coating gives a deeper visual profile and resists surface corrosion better than plain steel, while the rolled-edge outlet keeps the finish tidy and prevents sharp edges. At 6 inches long with a 3.5 inch outlet, it produces a noticeable visual extension but does not alter exhaust flow or sound, so it is purely cosmetic. Because it clamps on, it is reversible and adjustable but may require periodic tightening on a truck used off-road or in heavy vibration conditions. Fit depends on measuring the Tacoma tailpipe diameter and bumper clearance before buying to ensure a clean mount and avoid contact with the bumper or underbody trim.
Best for: Tacoma owners who want an easy, reversible cosmetic upgrade they can install themselves without welding and who prioritize appearance over performance changes.
Less Ideal for: Drivers seeking a permanent, welded tip or those who want to change exhaust sound or flow should look for bolted or welded options or performance-oriented components.
- Clamp-on design enables installation without welding or cutting
- Black powder-coated stainless steel resists corrosion and improves appearance
- Double-wall, rolled-edge construction gives a finished look and added durability
- Includes clamps and screws for a ready-to-fit DIY install
- Clamp-on attachment can loosen over time under heavy vibration or off-road use
Verdict: The best clamp-on black exhaust tip is engineered for secure, tool-friendly installation without welding, making it ideal for DIYers who want an easy, reversible upgrade.
Rough Country Black Dual-Wall Exhaust Tip (2.5–3")
Best Dual-Wall Exhaust Tip
| Fitment | 2.5–3 inches |
|---|---|
| Material | 304 Stainless Steel |
| Finish | Flat Black Powder Coat |
| Installation | Bolt-on, no drilling required |
The Rough Country Black Dual-Wall Exhaust Tip is a bolt-on styling piece that slips over 2.5–3 inch exhaust pipes and secures without drilling or welding. Constructed from 304 stainless steel with a high-temperature flat-black powder coat and a dual-wall design, it resists heat discoloration and reduces visible soot on the outer sleeve compared with single-wall tips. Installation is straightforward for a competent DIYer and usually only requires loosening and tightening the clamp hardware; some users note the attachment screws can protrude visibly depending on pipe diameter. The embossed RC logo and angled cut give a finished, aggressive look that holds up to road exposure, though a few buyers reported tight fitment on the upper end of the 3 inch range. This tip is purely cosmetic and does not change emissions or exhaust flow, so expect no performance gain beyond appearance and reduced outer staining. If you want a durable, low-maintenance black finish and a cleaner look from the dual-wall construction, this is a solid choice.
Best for: Buyers who prioritize a long-lasting blacked-out look and reduced outer staining from daily driving and want a simple bolt-on upgrade for their Tacoma's exhaust tip.
Less Ideal for: Those seeking power gains or engineered sound changes should look elsewhere, and owners who need guaranteed fit across nonstandard or oversized 3.0 inch outlets may prefer a different size or adjustable model.
- Dual-wall 304 stainless construction reduces visible soot and improves heat resistance.
- High-temperature flat-black powder coat maintains a blacked-out look under driving conditions.
- 100% bolt-on clamp installation with no drilling or welding required for most installs.
- Angled cut and embossed RC logo provide a finished, aggressive appearance.
- May fit tightly at the upper limit of 3 inch pipes and not slide over some 3.0 inch outlets.
- Attachment screws can protrude and be visible after installation depending on pipe size.
Verdict: The best dual-wall black exhaust tip uses an inner and outer sleeve to reduce visible soot and improve heat resistance for a cleaner, longer-lasting appearance under driving conditions.
Icyfond Adjustable Stainless Steel Black Exhaust Tip (2.75–3" Inlet)
Best Stainless Steel Exhaust Tip
| Inlet diameter | 2.75–3 inches |
|---|---|
| Fit range | Fits pipes 2.75–2.87 inches |
| Material | Thickened stainless steel |
| Finish | Black coated |
This adjustable stainless steel exhaust tip adds a sporty, finished look while protecting the tailpipe on compatible trucks. Designed for 2.75–3.0 inch inlet pipes, the tip slips over the stock tailpipe and secures with set screws for a simple install that needs no special tools. The thickened stainless steel core gives corrosion and heat resistance while the black coated finish provides a darker, factory-style appearance. Bottom drain holes reduce trapped moisture that can accelerate rust inside the tip. For Tacoma owners who want a discreet black upgrade, the beveled shape and polished edges blend with factory styling without changing exhaust tone or requiring welding. Limitations include the narrow inlet fit range and clamp-style mounting, which may not suit vehicles with larger or irregular tailpipes or owners seeking a welded, permanent modification.
Best for: Tacoma owners seeking a durable black stainless tip that installs quickly without welding and prioritizes a factory-matched, understated appearance.
Less Ideal for: Do not choose this if you want a welded or permanently mounted tip, need a larger inlet size, or prefer a dramatically altered exhaust sound or wide-flare styling.
- Durable thickened stainless steel construction for corrosion and heat resistance
- Black coated finish for a factory-style, low-profile look
- Adjustable 2.75–3.0 inch inlet fits common stock tailpipes in this size range
- Bottom drain holes help expel water and reduce internal moisture buildup
- Tool-free clamp installation for quick, reversible fitment
- Fits only 2.75–3.0 inch inlet diameters so may not fit all Tacoma exhausts
Verdict: The best stainless steel black exhaust tip pairs corrosion-resistant stainless construction with a durable black coating, offering longevity and a premium look for mechanics who want both performance and style.
A-KARCK Black PVD Angle-Cut Exhaust Tip, 2.5" Inlet to 4" Outlet
Best Angle-Cut Exhaust Tip
| Installation Type | Weld-On |
|---|---|
| Automotive Fit Type | Universal Fit |
| Material Type | PVD |
| Finish Type | Electroplating |
This angle-cut exhaust tip gives a Tacoma a sportier rear-end look without modifying the factory exhaust layout. It fits a 2.5 inch outside-diameter tailpipe and expands to a 4 inch angled outlet, so the visual effect is a wider, staggered exit with a deeper note in many setups. The coated PVD finish is applied via electroplating instead of simple paint, which reviewers say resists fading better at elevated exhaust temperatures, though it can show fingerprints and pick up oils. Installation is designed for welding-on, providing a permanent, clean attachment when fitted by a shop; the product is not a slip-on clamp design. Because it is universal-fit, expect to trim or prep the stock tailpipe for the best alignment and fitment on a Tacoma. The tip is low-restriction so it does not interfere with exhaust flow, but buyers should plan for professional welding to avoid leaks and to preserve the finish during installation.
Best for: Buyers who want a visual, sport-oriented upgrade for their Tacoma and are willing to have the tip permanently welded for a clean, factory-quality look.
Less Ideal for: If you prefer a no-weld, easily removable clamp-on tip or plan frequent changes to your rear styling, this permanent weld-on design is not the best choice.
- Distinct angle-cut outlet creates a sporty, aggressive rear appearance
- Electroplated PVD finish resists high-temperature fading better than spray paint
- Expands a 2.5" tailpipe to a 4" outlet while remaining low-restriction to exhaust flow
- Weld-on design yields a secure, permanent fit when professionally installed
- Requires welding for installation rather than a simple clamp-on fit
- Finish can show fingerprints and surface oils
Verdict: The best angle-cut black exhaust tip emphasizes a sporty, aggressive outlet profile and clean finish for buyers seeking a distinct visual upgrade to their vehicle's rear end.
Choosing the Right Toyota Tacoma Black Exhaust Tip: Key Factors to Consider
Fitment and Inlet Diameter
Accurate fitment is critical because Tacoma tailpipe diameters vary by model year and exhaust configuration. Measure the outside diameter of your tailpipe and compare it to the tip s inlet range. A snug slip-on fit reduces the need for welding, while an adapter or clamp can bridge small size differences.
Choosing the correct inlet diameter affects sealing and alignment. If the inlet is too large you risk movement and rattling. If it is too small you may need an adapter or sleeve that can complicate installation and create corrosion points over time.
Mounting Method
Black exhaust tips are commonly secured with clamp-on hardware, set screws, or welded connections. Clamp-on and bolt-on options are generally easiest for Tacoma owners because they require basic tools and are reversible. Set screws can bite into the tailpipe to lock the tip, but they must be installed carefully to avoid creating stress points.
Welded tips provide the most permanent attachment and can eliminate potential movement, but welding requires a professional or welding skills and makes future removal more difficult. Consider how permanent you want the installation to be and whether you may change the tip later.
Material and Coating Durability
Materials like stainless steel resist rust and last longer under exposure to moisture and road chemicals. Black finishes are typically applied as powder coat, ceramic coat, or PVD. Each finish type behaves differently with heat and abrasion: powder coat can chip over time, while PVD and ceramic finishes often offer better heat resistance and longer-lasting color retention.
For Tacoma owners who see winter salt or frequent off-road use, prioritize coatings and base metals that resist corrosion. Also check whether the finish extends to the inner lip and mounting areas, as exposed raw metal can rust and undermine the appearance and attachment.
Clearance and Styling Proportions
The tip s length, diameter, and exit angle affect both looks and function. A tip that protrudes too far can scrape on steep driveways or off-road obstacles, while one that is too short may look undersized on larger Tacoma trims. Consider how far you want the tip to extend past the bumper and whether a turned-down exit or angled cut complements your truck s rear bumper profile.
Styling choices also interact with practical clearance. Larger, conical tips make a bolder statement but can trap mud and debris more easily. Measure bumper cutouts and ground clearance before selecting a bulky design.
Heat and Soot Management
Exhaust tips see high temperatures and exposure to soot. A finish that tolerates thermal cycling will maintain color and adhesion over time. Designs with rolled lips or inner liners reduce direct exposure of the finish to hot exhaust flow and soot accumulation.
Consider inner liners that are stainless or thicker-gauge metal to limit discoloration. Regular cleaning routines will also help preserve the black finish, so factor in how easy the tip is to reach and wipe down when planning long-term maintenance.
Installation Complexity and Tools Required
Some tips are truly bolt-on and install with basic hand tools and a torque wrench. Others may require cutting the existing pipe, welding, or special adapters. Confirm whether the product requires drilling, set-screw tightening, or welding before making a decision.
If you want a quick DIY upgrade, favor clamp-on or bolt-on designs that match your inlet size. If you have access to welding or professional installation and prefer a permanent look, a weld-on tip can be considered, but remember this increases labor and makes future swaps more difficult.
Common Tailpipe Sizes on the Toyota Tacoma
Toyota Tacoma tailpipes commonly fall into a few diameter ranges depending on engine and exhaust setup. Identifying whether your truck uses a smaller single outlet or a larger outlet helps narrow compatible tip styles quickly.
Measure the outside diameter of the existing tailpipe where a tip would slide on. When in doubt, bring measurements to a parts supplier or compare them to the inlet ranges listed by manufacturers to avoid adapters or modifications.
- Measure outside diameter near the exit for best fit accuracy
- Account for any bends or rolled lips that change the effective diameter
- If you have a dual outlet setup, measure both pipes since they may differ slightly
Bolt-On Vs Slip-On Installation: Pros and Cons
Bolt-on designs use plated bolts or clamps to secure the tip while slip-on styles rely on the inlet fit plus clamps or set screws. Bolt-on options typically offer more positive retention with less risk of rotation or movement over time.
Slip-on tips are often faster to install and remove, and they are more forgiving of minor diameter mismatches when used with a clamp. However, ensure clamp hardware is corrosion-resistant and that the clamp area is covered by the finish to avoid aesthetic issues later.
- Bolt-on: secure, less movement, may require access for tightening
- Slip-on: quicker install, may need adapter if diameter mismatch exists
- Set-screw designs: simple but can damage the tailpipe if over-tightened
Maintaining a Black Finish on Exhaust Tips
To keep a black tip looking its best, clean it regularly with mild detergents and non-abrasive cloths. Avoid steel wool or harsh scrubbing pads that can scratch the finish and accelerate corrosion.
If soot builds up, use products designed for exhaust cleaning or degreasers that do not strip protective coatings. Inspect mounting areas for trapped moisture and salt after winter driving and rinse thoroughly when necessary.
- Regular wipe-downs prevent buildup that degrades coatings
- Use heat-tolerant cleaners for soot removal
- Inspect and touch up edges where finish wear first appears
Matching Tip Shape to Tacoma Rear Styling
Tip shapes range from straight-cut cylinders to angled or rolled designs. A compact straight-cut black tip often reads as understated and suits trucks with minimal rear trim, while an angled or turned-down exit can echo more aggressive rear bumper lines.
Consider whether a single larger tip or a dual-tip appearance better matches your Tacoma s bumper opening. Visual balance matters more than absolute size when creating a proportional rear-end look.
- Straight-cut: subtle and functional
- Angled or rolled: adds visual motion and can complement bumper angles
- Dual-look tips: provide symmetry for split outlets
Tools and Prep for a Smooth Installation
Prepare basic tools like torque wrenches, clamps, penetrating oil, and a tape measure. If the installation requires cutting, have a proper cutoff tool and a plan for deburring. For weld-on jobs, schedule time with a qualified technician and plan for heat-affected finish changes.
Protect surrounding bumper surfaces with masking to avoid marring the paint during installation. Keep spare hardware on hand in case bolts or clamps seize or thread incorrectly during fitting.
- Tape measure and calipers for accurate diameter checks
- Clamps, torque wrench, and thread locker for secure bolt-on installs
- Cutting and deburring tools if pipe modification is required
Still looking for the perfect fit?
Select your Toyota Tacoma configuration to see the most relevant Exhaust Tips recommendations
How We Chose the Best Toyota Tacoma Black Exhaust Tip
We shortlisted offerings that meet common Tacoma owner needs by applying specific, vehicle-focused filters. First we prioritized finish durability, looking for black coatings or PVD finishes that resist chipping and corrosion under typical driving conditions. Fitment and sizing were next: we checked inner diameter ranges, inlet styles, and whether a slip-on or bolt-on approach was provided to ensure straightforward installation on common Tacoma tailpipe sizes.We also evaluated mounting security and hardware quality, favoring designs that prevent rattling and maintain alignment over time. Thermal tolerance and material construction were considered so the tip retains its appearance when exposed to exhaust heat. Ease of installation was weighed, including whether the design requires cutting, welding, or only basic hand tools. Finally, we excluded items that only offer cosmetic coatings with poor corrosion protection or that require extensive modification to the exhaust system. The result is a list focused on real-world fit, durability, and straightforward installation for the Toyota Tacoma.
Our full evaluation process is outlined in our review methodology.
FAQ
Will any black exhaust tip fit my Tacoma without modification?
Not always. Fit depends on the tailpipe s outside diameter and the tip s inlet specification. Some tips are adjustable or come with adapters, but others require a specific inlet size or welding. Measure your tailpipe and check inlet ranges before purchasing.
How long does a black finish typically last on an exhaust tip?
Longevity depends on the underlying material and finish type. PVD and ceramic finishes usually resist heat and abrasion better than basic powder coat, but exposure to road salt, high temperatures, and off-road debris will eventually wear any finish. Regular cleaning extends life.
Can I install a slip-on tip myself?
Yes, many slip-on or clamp-on tips install with basic hand tools and a torque wrench. Ensure the inlet matches your tailpipe and tighten clamps to the recommended torque. If welding or cutting is required, consider professional help.
Will a larger exhaust tip affect performance or sound?
A simple cosmetic tip typically has minimal impact on exhaust flow or sound. Significant changes in diameter or adding resonated components can alter backpressure and tone, but standard slip-on tips sized for appearance do not usually change driving performance.
How do I prevent a tip from rotating or rattling?
Choose a tip with a reliable mounting method like a quality clamp or bolt-on flange. Properly torque fasteners and consider using anti-seize or thread locker on hardware to keep bolts secure. Set screws can help stop rotation but should be used carefully to avoid damaging the tailpipe.
Is welding required for a durable installation?
Welding provides the most permanent attachment and reduces the chance of movement, but it is not required for a durable installation. High-quality clamp-on or bolt-on designs can remain secure if installed correctly and inspected periodically.
Final Verdict
When choosing a black exhaust tip for your Toyota Tacoma, prioritize correct inlet fit, a durable base material, and a finish that resists heat and corrosion. Decide whether you want a reversible bolt-on or slip-on solution for easy changes, or a welded installation for permanence. Balance styling with practical clearance and maintenance needs so the tip complements your Tacoma without introducing fitment or durability issues. With these tradeoffs in mind, pick the option that matches your desired look, how permanent you want the change to be, and the real-world conditions your Tacoma faces.
Explore More:
- Check out all Toyota Tacoma parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
