Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you are planning to lift a Ram 2500 by 7 inches, choosing the right kit matters for drivability, durability, and safety. A properly designed 7 inch lift kit changes suspension geometry, steering angles, and brake line routing, so the wrong choice can cause handling or wear issues.This guide covers the top shortlisted 7 inch lift kits for Ram 2500 owners, focusing on fitment, ride quality, and installation complexity. We evaluate kits that let you run larger tires, maintain acceptable on-road manners, and support common towing and hauling needs. Read on for practical guidance to match a kit to how you use your truck and what modifications you should plan after installation.
Looking for other parts? See all Ram 2500 parts & accessories.
Top Picks at a Glance
| Best Overall Lift Kit The best all-around 7-inch lift kit balancing performance and fitment | Fabtech 14-18 Ram 2500 Front 5/7in Conversion with Dirt Logic 4.0 Coilovers (Component Box) |  |
| Best Budget Lift Kit A low-cost 7-inch lift option that still restores proper stance | TrendsAuto Air Lift LoadLifter 7500 XL Ultimate Kit with WirelessAIR Compressor (Fits 2014–2026 Ram 2500) |  |
| Best Premium Lift Kit Higher-end components and refined ride tuning for serious buyers | Fabtech 7RADARM 7-inch Lift Kit for 2014–2018 Ram 2500 |  |
| Best Complete Lift Kit Comprehensive kits that include all necessary parts for installation | Air Lift LoadLifter 7500 XL Ultimate Kit with WirelessAir Compressor |  |
| Best Bolt-On Lift Kit Kits designed for straightforward bolt-on installation with minimal cutting | Air Lift LoadLifter 7500 XL Ultimate Kit with WirelessOne Compressor System |  |
1. Fabtech 14-18 Ram 2500 Front 5/7in Conversion with Dirt Logic 4.0 Coilovers (Component Box)
Best Overall Lift Kit
| Automotive Fit Type | Vehicle Specific Fit |
|---|---|
| Item Type Name | Suspension |
| Material Type | Stainless Steel |
| Maximum Lifting Height | 7 inches |
This Fabtech component box converts the front suspension of 2014–2018 Ram 2500 4WD trucks to allow a 5- or 7-inch lift using Dirt Logic 4.0 coilovers. It is intended as a vehicle-specific front conversion, supplying fabricated stainless steel components designed and tested by Fabtech to relocate mounting points and fit performance coilovers. In practical use this kit provides a robust foundation for a 7-inch lift that keeps front geometry controlled and supports off-road loads, while the Dirt Logic coils improve damping compared with simple spacer lifts. The kit emphasizes durability and fitment by offering vehicle-specific parts rather than generic brackets, which helps reduce fabrication at installation. Limitations include that this listing is a component box for the front only and does not include complete rear lift hardware or necessarily every fastener or shock depending on how you source the full system. Expect professional installation or a well-equipped home shop for correct alignment and safety when installing a conversion of this scope.
Best for: Buyers who want a durable, vehicle-specific front conversion that supports a true 7-inch raise while prioritizing ride control and component quality over an all-in-one bolt-on shortcut.
Less Ideal for: Drivers looking for a full lift solution that includes rear hardware and all mounting parts in one purchase or owners without access to professional installation.
- Vehicle-specific conversion components for 2014–2018 Ram 2500 front suspension improve fit and reduce modification
- Includes Dirt Logic 4.0 coilover-compatible design for better damping and off-road performance compared with simple spacers
- Stainless steel component construction for corrosion resistance and long-term durability
- Designed and tested by an experienced aftermarket suspension manufacturer with in-field validation
- Front component box only and does not provide a complete full-vehicle kit
- Installation requires alignment and likely professional tools or a competent shop to ensure correct geometry
Verdict: The best all-around lift kit that balances ride quality, durability, parts completeness, and ease of installation for most buyers seeking a 7-inch raise.
2. TrendsAuto Air Lift LoadLifter 7500 XL Ultimate Kit with WirelessAIR Compressor (Fits 2014–2026 Ram 2500)
Best Budget Lift Kit
| Leveling Capacity (LBS) | Up to 7,500 |
|---|---|
| Mount Location | Underframe |
| Application Type | Rear Kit |
| Compressor Pressure (PSI) | 100 (max) |
| Compressor Power Source | 12V DC |
This LoadLifter 7500 XL Ultimate kit upgrades the rear suspension of Ram 2500 trucks to handle very heavy payloads while restoring a level stance. Installation mounts the large 7-inch double-bellows air springs under the frame and ties them to an EZ-mount onboard compressor that is controlled via the WirelessAIR mobile app for independent left/right inflation. In daily use the system makes hauling heavy trailers or cargo feel safer and more controlled by reducing sag and keeping the truck level at highway speeds. Notable features include a high claimed leveling capacity up to 7,500 lb, a packaged compressor/manifold unit for simpler installation, and an illustrated hardware kit with internal jounce bumpers. Limitations to consider are that this is an air-spring solution rather than a mechanical 7-inch suspension lift, so ground clearance and articulation gains differ from a traditional lift, and it will not fit Rams equipped with factory air suspension. Buyers should also expect a more value-oriented parts fit and finish compared with premium aftermarket lift kits.
Best for: Buyers who need the most cost-effective way to restore level stance and carry heavy loads on a Ram 2500 without swapping to a full mechanical lift and who prioritize payload support and simple app-based adjustment.
Less Ideal for: Drivers seeking a permanent 7-inch suspension lift for increased ground clearance and off-road articulation or those with factory air suspension should look at different solutions.
- Very high load-leveling capacity rated up to 7,500 lb for hauling heavy loads
- Large 7-inch double-bellows air springs provide strong lift at lower pressures for a smoother ride under load
- WirelessAIR app control allows independent left/right inflation for on-the-fly leveling
- EZ-mount compressor/manifold unit simplifies installation by combining components into a single package
- Not a traditional mechanical 7-inch lift, so it does not provide the same permanent ground clearance or suspension articulation improvements
- Does not fit Ram trucks that already have factory air suspension
Verdict: The best budget lift kit for buyers prioritizing price, offering a safe, cost-effective way to achieve a 7-inch lift while accepting some trade-offs in features or materials.
3. Fabtech 7RADARM 7-inch Lift Kit for 2014–2018 Ram 2500
Best Premium Lift Kit
| Brand | Fabtech |
|---|---|
| Model | FTS23177 |
| Product Type | Vehicle lift kit |
| Date First Available | September 3, 2016 |
This Fabtech 7-inch lift kit is a full suspension solution designed specifically for 2014–2018 Ram 2500 trucks. It raises the truck by roughly seven inches and includes the major components needed to lift and reset the chassis for larger tires and added ground clearance. Fabtech emphasizes engineered design and fabrication, so buyers can expect components built for heavy-duty use and longevity. In practice the kit is intended for professional installation and will be used by owners upgrading ride height for off-road capability, improved approach angles, or a taller stance. The kit’s strengths are the brand’s suspension expertise and a comprehensive package that avoids piecemeal purchases. Important limitations are its weight and complexity which means installation is labor intensive and may require alignment, driveline adjustments, and suspension tuning after fitment. This is a performance-oriented aftermarket upgrade rather than a simple bolt-on leveling kit, so plan for shop time and potential additional parts to optimize on-road manners.
Best for: Buyers who prioritize premium materials and engineered suspension upgrades for their Ram 2500 and are prepared to pay for a complete, long-lasting lift solution installed by a shop.
Less Ideal for: Owners seeking a simple, low-cost leveling kit or those unwilling to arrange professional installation and follow-up alignment or driveline work.
- Designed specifically for 2014–2018 Ram 2500 for direct fitment to that vehicle scope
- Comprehensive lift solution that includes the major suspension components needed for a 7-inch raise
- Manufacturer engineering and fabrication experience aimed at durability and heavy-duty use
- Heavy and complex kit that requires professional installation and alignment
- May necessitate additional driveline or suspension adjustments after installation to restore on-road handling
Verdict: The best premium lift kit for buyers willing to pay more for superior materials, engineering, adjustable components, and improved on-road ride and longevity.
4. Air Lift LoadLifter 7500 XL Ultimate Kit with WirelessAir Compressor
Best Complete Lift Kit
| Leveling Capacity (LBS) | Up to 7,500 |
|---|---|
| Mount Location | Underframe |
| Application Type | Rear Kit |
| Compressor Pressure (PSI) | 100 (max) |
This kit combines Air Lift LoadLifter 7500 XL double-bellows air springs with a WirelessAir 2nd Gen compressor and EZ Mount bracket to add serious load-leveling capacity to a Ram 2500. It is designed to install under the frame at the rear and includes the air springs, internal jounce bumper, mounting brackets, hardware, an illustrated guide, and a pre-assembled compressor bracket to simplify installation. In use the large 7-inch bellows give greater volume so the truck levels heavy loads at lower pressures while the WirelessAir controller lets you inflate each side independently from the app or remote for a more stable ride. The kit is aimed at trucks that tow or haul regularly and want a single packaged solution rather than sourcing parts separately. Buyers should note this is an air suspension kit rather than a traditional shock-and-spring lift kit and it requires plumbing, electrical hookup for the compressor, and periodic maintenance of the air system.
Best for: Buyers who want a single, vehicle-specific package to add up to 7 inches of lift-like load leveling and on-board inflation control for regular heavy towing or hauling on a Ram 2500.
Less Ideal for: Drivers seeking a full aftermarket suspension rebuild with upgraded shocks, long-travel control arms, or permanent ride-height changes should look at dedicated mechanical lift kits instead.
- Includes large 7-inch double-bellows air springs for high volume and strong load-leveling capacity
- Comes with WirelessAir compressor and EZ Mount pre-assembled bracket for easier installation and on-vehicle control
- Complete package includes brackets, internal jounce bumper, hardware, and illustrated installation guide
- Dual-path independent inflation allows each side to be adjusted separately for a level, stable ride under load
- Not a traditional mechanical lift kit with shocks and long travel components so it does not replace a complete suspension overhaul
Verdict: The best complete lift kit for buyers who want a single purchase that includes brackets, hardware, shocks or struts, and other parts needed for a full 7-inch installation.
5. Air Lift LoadLifter 7500 XL Ultimate Kit with WirelessOne Compressor System
Best Bolt-On Lift Kit
| Leveling capacity (LBS) | Up to 7,500 |
|---|---|
| Mount location | Underframe |
| Application type | Rear Kit |
| Compressor max pressure (PSI) | 100 (max) |
| Compressor power source | 12V DC |
This LoadLifter 7500 XL Ultimate kit combines large double-bellows air springs with Air Lift's WirelessOne compressor to provide serious rear load leveling for 2014–2026 Ram 2500 trucks. The 7-inch double-bellows air springs increase air volume for more lift and leveling power while the WirelessOne system uses a single-path control so both sides inflate and deflate to the same pressure via remote or mobile app. Installation is intended as a bolt-on underframe rear kit and includes brackets, hardware, internal jounce bumper and a fully illustrated guide, so a competent DIYer with common hand tools can complete the job without welding. In use it smooths the ride and keeps the truck level when hauling heavy cargo or towing, and the WirelessOne lets you adjust pressure on the go. Limits to consider are the single-path control that does not allow side-to-side independent tuning and the system is not compatible with trucks that already have factory air suspension. The kit is meant for heavy hauling rather than fine off-road articulation adjustments.
Best for: DIY-minded Ram 2500 owners who need a factory-style bolt-on solution to level and support very heavy rear loads and value wireless, in-cab control without complex fabrication.
Less Ideal for: Drivers who need independent side-to-side suspension tuning, those with existing factory air suspension, or buyers seeking lift for extreme off-road articulation rather than load support.
- High load-leveling capacity rated up to 7,500 lbs for heavy hauling scenarios
- Large 7-inch double-bellows springs provide more air volume and lift at lower pressures
- WirelessOne wireless compressor and app/remote control for on-the-fly pressure adjustments
- Includes mounting brackets, hardware, internal jounce bumper and illustrated instructions for bolt-on installation
- Designed to fit 2014–2026 Ram 2500 rear underframe with compatibility notes for in-bed hitch and side-mount fifth wheel setups
- Single-path system inflates both sides to the same pressure so no independent left-right tuning
Verdict: The best bolt-on lift kit for DIYers who want a 7-inch lift that installs with common tools and minimal frame modification or welding.
Choosing the Right Ram 2500 7 Inch Lift Kit: Key Factors to Consider
Fitment and Vehicle Scope
Correct fitment is essential for a 7 inch lift kit on a Ram 2500 because this truck uses heavy-duty suspension components and specific steering geometry. A kit that does not account for factory mounting points or that alters track width without proper corrective arms can create accelerated wear on ball joints, tie rods, and wheel bearings. Verify the kit is engineered for Ram 2500 chassis details, model year changes, and any specific cab or axle configurations you have.
Beyond initial fit, check whether the kit requires additional parts such as extended control arms, track bar brackets, or brake line relocation. Kits that preserve service access to common maintenance points will reduce long-term ownership headaches.
Suspension Design and Ride Quality
A 7 inch lift can be achieved in several ways: long-arm conversions, coil spring replacements, spacer-style lifts, or a combination. Each approach affects ride quality differently. Long-arm and full coil replacements typically restore better wheel travel and geometry, resulting in more controlled handling on- and off-road. Spacer-style lifts are less invasive but can make the suspension harsher and place extra stress on components.
Consider how you use the Ram 2500. If you tow or carry heavy loads, prioritize designs that preserve load capacity and progressive spring rates. If off-road articulation is a priority, look for kits that increase travel while maintaining predictable rebound and compression damping.
Drivetrain and Alignment Effects
Raising the truck by seven inches changes driveline angles and can increase vibration or stress on U-joints and CV components. Some kits include adjustable control arms or driveline correction brackets; others will require a driveshaft modification or a slip yoke eliminator. Plan for alignment changes too: caster, camber, and toe will need adjustment after installation, and some kits necessitate aftermarket adjustable arms to return alignment specs to factory-like values.
If you regularly tow or haul, incorrect driveline angles or misaligned suspension can accelerate wear and reduce safety margins.
Braking and Safety Considerations
Upgrading to larger tires or changing suspension geometry affects braking performance. A 7 inch lift increases rotational inertia when you fit larger-diameter tires, which can lengthen stopping distances and alter ABS calibration. Ensure the kit leaves room for proper brake line routing and does not compromise ABS or sensor harnesses.
Evaluate whether you may need upgraded brake components or longer brake lines as part of the build. Additionally, confirm that any changes to steering or wheel offset do not create unsafe scrub or interference with braking components.
Tire Clearance and Wheel Fitment
One of the main reasons owners choose a 7 inch lift is to run much larger tires. When planning, account for correct backspacing, wheel offset, and potential trimming of inner fender wells. The combination of wheel width, offset, and tire diameter determines whether rubbing occurs during suspension compression or full lock steering turns.
A well-documented kit should list recommended wheel and tire sizes. If you plan to run very wide tires or aggressive offsets, expect additional modifications such as extended sway bar links, steering stops, or minor bodywork to prevent interference.
Installation Complexity and Serviceability
A full 7 inch lift can be a multi-step project that may include disassembly of front and rear suspension, installation of new control arms, extended brake lines, driveshaft work, and a full alignment. Some kits are designed for experienced DIYers with a well-equipped garage, while others are intended for professional installation.
Consider the availability of local shops familiar with heavy-duty truck lifts and whether the kit supports phased upgrades. Kits that use common fasteners and replaceable bushings will be easier to service over the vehicle's lifetime.
How a 7 Inch Lift Changes Truck Behavior
Raising a Ram 2500 by 7 inches alters center of gravity, steering geometry, and suspension leverage points. Expect a different on-road feel, with increased body roll and altered turn-in characteristics unless corrective geometry components are included. Off-road, the added ground clearance and ability to fit larger tires increase capability over obstacles but may reduce high-speed stability on loose surfaces.
Plan for supportive changes after the lift. Adjustable control arms or longer sway bar end links help recover predictable handling. Shock valving that matches the new ride height and load characteristics will also make a noticeable difference.
- Higher center of gravity affects cornering
- Longer steering links or corrected caster needed for proper tracking
- Shock tuning should match the new height and wheel travel
Tire and Wheel Recommendations for a 7 Inch Lift
Selecting the right wheel width and offset is as important as choosing tire diameter. A 7 inch lift usually allows for significantly taller tires, but excessive width or negative offset can cause rubbing or put extra leverage on wheel bearings. Aim for wheels with an offset that centers the tire within the wheel well for predictable suspension loading.
Consider tire sidewall construction and load rating. Heavy load-rated all-terrain or mud-terrain tires will affect steering and fuel economy, so pick a tire that balances durability with acceptable road manners for everyday driving.
- Match wheel offset to recommended clearances
- Choose tires with appropriate load ratings
- Consider narrower options if close to rubbing on full compression
Common Additional Modifications After a Lift
A comprehensive 7 inch lift often requires more than just springs and brackets. Common follow-up items include extended brake lines, adjustable track bars, driveshaft corrections, upgraded shocks, and alignment-specific control arms. These parts restore geometry and ensure safe, durable operation under load or off-road stress.
Addressing these items during the initial build reduces the chance of premature wear and eliminates the need for frequent rework later. Budgeting for these ancillary parts upfront leads to a safer and more reliable finished truck.
- Adjustable control arms for proper caster
- Driveshaft or slip-yoke modifications for driveline angle
- Extended or braided brake lines for secure routing
Installation Prep and Shop Considerations
Decide whether to install the kit yourself or use a professional shop. A 7 inch lift is typically more complex than a small leveling kit and may require specialized tools such as hydraulic presses, alignment racks, and torque-controlled fasteners. Confirm the installer has experience with heavy-duty Ram 2500 lifts and can complete a thorough alignment afterwards.
If you opt for shop installation, request a detailed work scope that lists additional parts and alignment specs. If DIY, set aside adequate time and verify you have the required tools, torque values, and a post-installation alignment plan.
- Expect full suspension disassembly and reassembly
- Plan for a post-install alignment and test drive
- Verify torque specs and replacement torque-to-yield hardware where applicable
Legal and Load Capacity Implications
A 7 inch lift can affect your truck's legal status in some jurisdictions and may change load rating behavior. Ensure that any lift and tire combination remains within local height regulations and that load-carrying capacity is not compromised. Changes to axle angles or spring rates can alter how the truck handles heavy payloads.
When towing, recheck hitch heights and ensure braking performance remains adequate with larger tires. Maintaining proper payload distribution and being conservative with gross combined weight will protect the chassis and braking system.
- Verify local vehicle height and tire size regulations
- Reassess payload and towing configurations after lift
- Confirm hitch and trailer connections are still level and secure
Still looking for the perfect fit?
Select your Ram 2500 configuration to see the most relevant Lift Kits recommendations
How We Chose the Best Ram 2500 7 Inch Lift Kit
We shortlisted 7 inch lift kits based on five practical, vehicle-specific criteria that matter for a Ram 2500. First, fitment precision: kits were assessed for how well they maintain factory mounting points, steering geometry, and brake line clearance for a 7-inch raise. Second, suspension design: we evaluated whether the kit uses long-arm geometry, coil spring components, or spacer/topper approaches, and how each option affects travel and load capacity. Third, durability and materials: we looked for heavy-gauge steel, hardened hardware, and corrosion-resistant finishes appropriate for a heavy-duty truck.Fourth, serviceability and parts availability: kits that allow phased installation and use common replacement parts ranked higher. Fifth, installation complexity: we considered whether the kit requires major fabrication, advanced alignment work, or additional driveline upgrades such as track bar or brake line relocation.Excluded items included minor leveling spacers, kits under a 6.5-inch raise, and solutions intended for light-duty trucks or SUVs. Our evaluation prioritized real-world compatibility with Ram 2500 duty cycles rather than purely aesthetic lifts.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a 7 inch lift void my Ram 2500 warranty?
It depends on the warranty terms and what component is affected. Modifying suspension can lead manufacturers or service departments to deny warranty coverage for related failures, especially if the lift is linked to the failure. Keep records of professional installation and consider discussing potential impacts with your dealer or warranty provider.
Can I install a 7 inch lift kit at home?
Some experienced DIYers can install a full 7 inch lift, but it requires substantial tools, time, and mechanical skill. Many kits need press-fit bushings, driveline adjustments, and a full alignment, so unless you have the proper equipment and knowledge, professional installation is often recommended.
Do I need to change my driveshaft after a 7 inch lift?
You may need driveline corrections depending on the kit and axle layout. A 7 inch raise can change driveshaft angles enough to cause vibration or increased U-joint wear. Some builds require a driveshaft modification or adjustable components to return angles to acceptable ranges.
What tire size can I run with a 7 inch lift on a Ram 2500?
Tire size depends on wheel offset, width, and the specific lift kit clearance. Many owners run much taller tires with a 7 inch lift, but you should consult the kit's recommended tire sizing and account for potential trimming or additional components to prevent rubbing under full articulation.
How does a 7 inch lift affect towing and payload?
A significant lift changes suspension geometry and can reduce effective load-carrying behavior if spring rates are altered. Towing may be impacted by changed hitch height and altered braking performance with larger tires. Reassess weight distribution and verify towing connections after installation.
Final Verdict
For most Ram 2500 owners, choosing a 7 inch lift is a balance between the desired clearance and maintaining safe, serviceable suspension geometry. Prioritize kits that address steering and driveline angles, provide clear guidance on wheel and tire fitment, and include or recommend corrective arms when needed.Plan for supporting upgrades such as shocks, brake line extensions, and alignment-specific components. When you match the kit to how you use the truck and budget for ancillary parts and installation, you will achieve the capability you want while minimizing long-term maintenance and safety tradeoffs.
Explore More:
- Check out all Ram 2500 parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
