Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading your Scion xB 6×8 speakers can noticeably improve clarity, bass response, and overall listening enjoyment in daily driving. You want units that fit the vehicle's door openings, handle the output from your head unit or amplifier, and survive the cabin environment. This guide highlights our shortlisted picks for the Scion xB 6×8 speakers and explains the evaluation criteria used to choose them. Read on to see which features and specifications matter most when fitting replacement 6×8 speakers to a Scion xB.
Looking for other parts? See all Scion xB parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | Alphasonik AS268P 6×8 3-Way Car Speakers (2 Pairs) | ![]() |
| Best Quality Built to a higher standard if you want something more solid | Rockford Fosgate Punch P1683 6×8 3-Way Coaxial Car Speakers (Pair) | ![]() |
| Best Value The sweet spot between price and what you get | JBL Club 8620 6×8 2-Way Coaxial Car Speakers (pair) | ![]() |
| Best budget The cheapest option that still gets the job done reliably | Orion Cobalt Series CB683 6×8" 3-Way Coaxial Car Speakers (Pair) | ![]() |
| Highest Rated A top-rated pick with lots of positive feedback | JBL GX8628 6×8" 2-Way Coaxial Car Speakers (Pair) | ![]() |
| Most popular A crowd favorite that many people choose with confidence | MB Quart FKB168 6×8" 200W Coaxial Car Speakers (set of 4) | ![]() |
| Best Seller A high-volume bestseller chosen again and again | Pioneer A-Series TS-A6881F 6×8 4-Way Car Speakers (Pair) | ![]() |
1. Alphasonik AS268P 6×8 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92 dB |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws, Installation Manual |
| Power Handling | 350 Watts Max / 35 Watts RMS each |
The Alphasonik AS268P kit supplies two pairs of 6×8 3-way coaxial speakers intended to replace factory door or deck speakers in a Scion xB. Each speaker is rated 350 watts peak (35 watts RMS each per stated packaging) and runs at 4 ohms, with a claimed frequency range down to 28 Hz and 92 dB sensitivity. The kit includes mounting screws, basic coaxial cables and installation manual so typical use is direct bolt-in or wired replacement with minimal fabrication when the Scion xB has standard 6×8 openings. In practice these speakers give noticeably clearer mids and highs compared with many stock units and add more perceived volume driven by the head unit alone. They are best paired with modest equalizer adjustment or a small subwoofer for fuller low end since bass extension and true power handling are limited by the stated RMS figures. Build quality is reasonable for the price but magnet size and materials suggest these are value-oriented rather than high-end components. Expect straightforward installation and a clear upgrade from factory sound, but not audiophile-level bass or long-term durability under heavy power without an external amp.
Best for: Balanced all-round buyers looking for an affordable, straightforward speaker upgrade that improves clarity and volume from the stock Scion xB system without adding an amplifier or major installation work.
Less Ideal for: Audiophiles chasing deep bass or high-power systems and drivers that will be pushed by aftermarket amplifiers should consider higher-end speakers and a dedicated sub instead.
- Includes two pairs and basic mounting hardware for a near-complete stock replacement in one purchase.
- 3-way coaxial design improves midrange and treble clarity over typical factory speakers.
- High sensitivity (92 dB) makes them responsive to deck power without requiring an amplifier.
- Shallow enough mounting depth for many door locations in compact cars like the Scion xB.
- Advertised peak power is much higher than RMS rating so headroom for sustained loud listening is limited.
- Not water resistant so exposure to moisture in door locations could reduce lifespan.
- Construction and magnet size indicate value-tier performance rather than premium fidelity under high power.
Verdict: A budget-friendly 6×8 3-way kit that noticeably improves clarity and volume for a Scion xB factory replacement but stops short of high-power bass performance.
2. Rockford Fosgate Punch P1683 6×8 3-Way Coaxial Car Speakers (Pair)
| Speaker Type | Coaxial |
|---|---|
| Power (Max) | 130 Watts |
| Impedance | 4 Ohms |
| Frequency Response | 65 Hz |
| Speaker Size | 8 Inches |
The Punch P1683 delivers a performance-focused 6×8 coaxial speaker option for Saturn Vue owners looking to upgrade factory sound without major modifications. Each pair combines a 6-inch woofer with an integrated PEI dome tweeter and built-in crossover to produce clearer highs and tighter mids than typical stock speakers. The mineral-filled polypropylene cone and butyl rubber surround resist cone flex at higher volumes so the speakers maintain definition up to their 130 watt peak power rating. The FlexFit basket helps align the speaker to factory mounting points for easier install into many 6×8 openings. In real-world use the P1683s provide noticeably more presence and cleaner treble for modern music, and they pair well with a small amplifier if you want extra headroom. Expect improved clarity and louder, punchier sound compared with stock units, but keep in mind they are not weatherproof and require proper mounting and wiring to avoid distortion at extreme volumes.
Best for: Performance-oriented buyers who prioritize clearer highs and stronger midbass from a direct-fit 6×8 replacement and want a durable, factory-style upgrade for daily driving and spirited listening.
Less Ideal for: Users seeking weatherproof or marine-rated speakers or those who need a plug-and-play wireless audio solution should consider other options.
- 3-way coaxial design with PEI dome tweeter for clearer high frequencies
- Mineral-filled polypropylene cone and butyl rubber surround for controlled midbass output
- 65 Watts RMS (130 W peak) provides higher output than typical factory speakers
- FlexFit basket eases alignment with factory mounting holes for simpler installation
- Not waterproof so not suited for exposed or heavily humid installations
Verdict: The P1683 pair gives Saturn Vue owners a high-quality, direct-fit 6×8 upgrade that delivers clearer highs and punchier midbass with easy factory-style installation.
3. JBL Club 8620 6×8 2-Way Coaxial Car Speakers (pair)
| Speaker size | 6 x 8 inches |
|---|---|
| Power (per speaker) | 55 watts RMS / 165 watts peak each |
| Impedance | 3 ohms |
| Frequency response | 65 Hz – 20 kHz |
The JBL Club 8620 is a 6×8 two-way coaxial speaker pair aimed at replacing factory midwoofers in cars. Each speaker pairs a polypropylene woofer with an edge-driven balanced dome tweeter and includes passive crossovers, so installation restores midrange clarity and delivers stronger bass than most stock units. Practical features include a relatively high sensitivity and 55 watts RMS per speaker, which lets them play cleanly from a factory head unit or benefit noticeably when driven by a small amp. Reviewers report punchy, well-rounded sound and straightforward top-mount installation in tight locations. Limitations to expect are minimal installation hardware and short tweeter leads, so plan to add wiring and proper mounting foam or brackets for a sealed fit in Scion xB door or rear locations. Also these are not high-end audiophile drivers, so listeners seeking ultra-refined detail or extreme power handling will want to upgrade further.
Best for: Practical optimizers who want a clear, punchy upgrade for their Scion xB without spending on a full component system and who prioritize measurable improvements per dollar spent.
Less Ideal for: Audiophiles chasing studio-grade detail or owners planning to push very high amplifier power who need higher-end component speakers and dedicated enclosures.
- Balanced 2-way design with dedicated tweeter improves clarity over stock speakers.
- 55 watts RMS per speaker provides clear output from a factory head unit or small amp.
- High sensitivity yields good loudness without large power increases.
- Includes passive crossovers to protect the tweeter and simplify wiring.
- Minimal installation hardware and short tweeter leads require purchasing or fabricating additional wiring and mounting accessories.
- Not intended for high-power, audiophile systems where ultra-low distortion and extreme power handling are required.
Verdict: A cost-effective, easy-to-install 6×8 speaker pair that gives a clear, punchy upgrade for a Scion xB while requiring a little extra hardware for the best fit.
4. Orion Cobalt Series CB683 6×8" 3-Way Coaxial Car Speakers (Pair)
| Speaker Type | 3-Way Coaxial |
|---|---|
| Speaker Size | 6×8 inches |
| Impedance | 4 Ohms |
| Power Handling | 70W RMS / 280W Peak |
| Frequency Response | 75Hz – 20kHz |
The Orion CB683 are budget-focused 6×8-inch coaxial speakers that replace factory units to deliver louder, fuller sound without requiring a full component system. They use a 3-way design with woofer, midrange and tweeter to cover a wide frequency range and are rated for 70W RMS (280W peak), 4 ohm impedance and about 75Hz–20kHz frequency response. In practice they bring stronger bass and clearer highs compared with many stock Scion xB speakers, and the polypropylene cone with butyl rubber surround helps keep distortion down at higher volumes. Installation is straightforward for most 6×8 openings but some users report fitment tightness in certain door pockets, so trimming or adapters may be needed for a flush mount in older xB panels. They are not waterproof and will benefit from a decent head unit or amplifier to reach their best potential. For buyers on a budget these speakers offer a noticeable upgrade in punch and clarity but expect modest refinement compared with higher-end component sets.
Best for: Budget-conscious drivers who want a clear, louder upgrade over factory speakers in their Scion xB without replacing the entire audio system; good for DIYers who prioritize value over premium refinement.
Less Ideal for: Audiophiles seeking the most detail and separation or owners who need weather-resistant speakers for frequently wet door locations should consider higher-end or marine-rated alternatives.
- 3-way coaxial design provides improved midrange and treble clarity over typical stock speakers
- Higher peak and RMS power handling for louder, cleaner playback when paired with a stronger head unit or amp
- Polypropylene cone and butyl rubber surround resist distortion and deliver punchy bass for size
- Easy-to-follow connections and common 6×8 footprint make DIY installation feasible
- Good value for money for buyers seeking an affordable sound upgrade
- Not rated as waterproof so exposure to moisture or door-panel dampness may reduce longevity
- May require trimming or speaker adapters for a flush fit in some Scion xB mounting locations
Verdict: A budget-friendly 6×8 upgrade for Scion xB owners that delivers stronger bass and clearer highs but may need adapters or an amp to reach full potential.
5. JBL GX8628 6×8" 2-Way Coaxial Car Speakers (Pair)
| Peak power handling | 180W per speaker |
|---|---|
| Continuous power (RMS) | 60W per speaker |
| Frequency response | 50Hz – 21kHz |
| Sensitivity | 92 dB @ 2.83V |
| Nominal impedance | 2.3 ohms |
The JBL GX8628 are 6×8" two-way coaxial speakers intended as a direct-swap upgrade for factory units in vehicles that accept that size, including the Scion xB. They combine a Plus One polypropylene woofer cone and an edge-driven soft dome tweeter to extend frequency response up to about 21 kHz and produce articulate vocals and crisp highs. Rated for 180 watts peak and 60 watts continuous per speaker, these handle higher head unit output and can be driven harder if you later add a small amplifier. Installation is straightforward for standard 6×8 openings and buyers will appreciate JBLs factory-quality reliability testing and consistent voicing across pairs. Expect noticeably better clarity and tighter mid-bass compared with aged stock speakers, though they are not a substitute for a dedicated subwoofer if you want deep, room-shaking bass. Also the low nominal impedance can draw more current from weak factory amplifiers so a stronger head unit or amp may be needed to reach maximum loudness without distortion.
Best for: Reliability-focused buyers who prioritize a durable, factory-quality speaker upgrade for everyday driving and want clear, consistent sound from their Scion xB without frequent replacements.
Less Ideal for: Buyers seeking extreme bass output or a full audio overhaul; choose a separate subwoofer or component system instead of relying solely on coaxials.
- Factory-level reliability testing and consistent voicing across the pair for dependable long-term use
- Plus One polypropylene woofer delivers clearer mids and stronger bass than typical stock 6×8 speakers
- Edge-driven soft dome tweeter and 21 kHz frequency response produce detailed highs and vocals
- Handles higher power (180W peak / 60W RMS) so it pairs well with upgraded head units or a small amp
- Nominal impedance is low which can stress weak factory amplifiers and reduce available volume before distortion
- Does not provide deep sub-bass, so you will still need a subwoofer for very low-frequency impact
Verdict: A reliable, factory-quality 6×8" upgrade that brings clearer mids and detailed highs to the Scion xB but needs a sub or amp for heavy bass.
6. MB Quart FKB168 6×8" 200W Coaxial Car Speakers (set of 4)
| Speaker Type | Coaxial, Tweeter |
|---|---|
| Impedance | 4 Ohms |
| Speaker Maximum Output Power | 200 Watts |
| Tweeter Diameter | 1 Inches |
| Woofer Diameter | 8.6 Inches |
These MB Quart FKB168 6×8 coaxial speakers are intended as an affordable, plug-in upgrade for factory sound in vehicles like the Scion xB. Each speaker combines a polypropylene cone, aluminum dome tweeter and an internal 6 dB crossover to deliver clearer highs and tighter midrange than many stock units. They are commonly used as direct replacements in factory speaker locations and benefit noticeably when paired with even a modest external amp or a head unit that supplies higher RMS power. Practical features such as butyl rubber surrounds, Kapton voice-coil formers and a stamped-steel frame help durability for door installations. You will get decent mid-bass presence and crisp treble, but sensitivity and the quoted power handling mean these speakers sound best when driven by a stronger source rather than a weak factory radio. They do not include grilles and some users report a need for additional bass support from a subwoofer to reach deep low frequencies. For a convenience-focused Scion xB owner these speakers offer a straightforward, measurable step up from stock.
Best for: Convenience-driven buyers who want a straightforward, bolt-in sound upgrade for a Scion xB without complex installation or major system changes.
Less Ideal for: Audiophiles seeking reference-level bass extension or users who want a complete high-power component system without adding an amplifier or subwoofer.
- Designed as drop-in 6×8 replacements for easy installation in factory locations
- Aluminum dome tweeters provide clear, durable high-frequency response
- Butyl rubber surrounds and stamped-steel frames improve durability for door mounting
- Internal crossover simplifies integration and smooths mid-to-high transitions
- Modest sensitivity means weak factory head units may not drive them to their potential
- No speaker grilles included
- Limited deep-bass output; a subwoofer is recommended for full low-end extension
Verdict: A convenient, affordable 6×8 drop-in upgrade that sharpens highs and mids for a Scion xB but benefits from a stronger head unit or amp for best performance.
7. Pioneer A-Series TS-A6881F 6×8 4-Way Car Speakers (Pair)
| Product Dimensions | 3 x 8 x 5.38 inches |
|---|---|
| Item Weight | 1.4 pounds |
| Manufacturer | Pioneer Corporation |
| Item model number | TS-A6881F |
| Date First Available | October 10, 2023 |
The Pioneer TS-A6881F 6×8 4-way speakers are a direct replacement-style coaxial pair aimed at improving in-car sound without an amplifier. They use separate drivers for highs, mids, and lows to produce clearer vocals, smoother treble, and stronger low-end compared with typical factory speakers. With 350 watts peak and 80 watts RMS power handling and 90 dB sensitivity these speakers can reach high volume levels with minimal distortion from a factory head unit, and their 30 Hz to 32 kHz frequency range helps preserve both bass impact and detail in the highs. Installation follows the same process as most 6×8 replacements and fits common mounting locations for vehicles like the Saturn Vue. Limitations include the usual expectations for coaxial speakers: you will not get the same bass extension or imaging as a component system or a dedicated subwoofer, and true high-power performance benefits from a stronger aftermarket amplifier.
Best for: Risk-averse mainstream buyers looking for a reliable, factory-style speaker upgrade to improve clarity and bass without complex installation or major electrical changes.
Less Ideal for: Audiophiles seeking the deepest bass or the widest soundstage and buyers planning extensive high-power custom systems should consider component speakers and a subwoofer instead.
- 4-way coaxial design separates frequency duties for clearer vocals and smoother highs
- High sensitivity (90 dB) makes them loud and clear with factory head units
- Good power handling (80W RMS, 350W peak) supports louder playback without immediate distortion
- Wide frequency range (30 Hz to 32 kHz) preserves bass punch and high-frequency detail
- Coaxial format cannot match the soundstage or bass depth of component speakers plus subwoofer
- Best sonic results require an aftermarket amplifier for full power potential
Verdict: A dependable, high-sensitivity 6×8 coaxial upgrade that noticeably improves clarity and bass over stock speakers while remaining easy to install.
Choosing the Right Scion xB 6X8 Speakers: Key Factors to Consider
Mounting Depth and Fitment
Mounting depth determines whether a 6×8 speaker will physically fit in the Scion xB door location. Measure the available depth including grille and rear clearance to avoid contact with window mechanisms or door panels. An adapter or spacer can help, but greater mounting depth may require modifications. Proper fitment also affects sealing and acoustic coupling. A speaker that does not sit flush or leaves gaps can lose low-end response and introduce rattles. Verify bolt pattern and mounting holes to reduce the need for drilling or cutting.
Power Handling and Sensitivity
Power handling, usually given as RMS and peak watts, indicates how much continuous power the speaker can handle before distortion or damage becomes likely. Match the RMS rating to the output of your head unit or amplifier to prevent underpowering or overdriving the speaker. Sensitivity affects how loud a speaker will play with a given input. Higher sensitivity speakers will sound louder at the same power level, which matters if you plan to use the factory radio without an amplifier. Consider both ratings together to balance loudness and clean headroom.
Frequency Response and Tonal Balance
Frequency range specs show the low and high endpoints the speaker can reproduce, but real-world tonal balance depends on cone design and crossover implementation. For door-mounted 6×8 speakers, aim for units that deliver a solid midrange and usable bass since they will handle a wide portion of the audible band. A speaker with strong midrange will improve vocal clarity and instrument separation. If you need extra low-end, plan to pair the speakers with a dedicated subwoofer or an amplifier that provides clear control at low frequencies.
Speaker Type: Coaxial Vs Component
Coaxial 6×8 speakers include tweeters mounted to the woofer assembly, providing an all-in-one replacement that is simpler to install. They are often the easiest route for repeatable upgrades without running separate tweeter wiring. Component setups separate tweeters and crossovers from the woofer, offering better imaging and more precise crossover slopes. For a Scion xB installation, components can improve stage and clarity but require additional mounting locations and wiring, which may complicate the install.
Build Quality and Weather Resistance
Door speakers face temperature swings, moisture, and vibration. Materials like treated cones, robust surrounds, and corrosion-resistant hardware increase longevity. Look for speakers with sealed or coated tweeter assemblies to resist cabin moisture. Solid construction also reduces distortion at higher volumes and helps maintain consistent performance over time. Consider the warranty and stated durability features when evaluating long-term value.
Installation Ease and Included Hardware
Speakers that include mounting adapters, gaskets, or specific screws reduce installation time and the chance of fitment issues. Pre-attached wiring pigtails or clear terminal access help maintain polarity and simplify connections. If the speaker requires special brackets or custom trimming, factor that into labor time and complexity. Easy-to-follow instructions and standard mounting patterns are especially valuable for DIY installs in the Scion xB.
How We Chose the Best Scion xB 6X8 Speakers
We focused on factors that matter specifically when replacing 6×8 speakers in the Scion xB. Key evaluation criteria included mounting depth and adapter compatibility to ensure a proper fit, nominal and peak power handling to match typical factory and aftermarket stereo systems, frequency range and sensitivity for perceived loudness and clarity, build quality and materials for durability in a car environment, and ease of installation including mounting hardware and wiring access. We also considered the balance between bass output and midrange detail so drivers could get full-range sound without excessive distortion. We excluded options that required extensive dashboard or structural modification, speakers with unclear specifications, or products that do not provide adequate fitment information for the Scion xB. The final list emphasizes speakers that offer reliable performance, clear spec sheets, and realistic installation requirements for this vehicle.
Our full evaluation process is outlined in our review methodology.
FAQ
Will any 6×8 speaker fit my Scion xB?
Not every 6×8 speaker will fit without checking dimensions. You need to confirm mounting depth, bolt pattern, and overall frame size. Some speakers require adapters or spacers to clear window hardware or achieve a flush fit in the door.
Should I choose coaxial or component 6×8 speakers for the Scion xB?
Coaxial speakers are usually simpler to install and work well as a direct upgrade, while component speakers can offer improved imaging and clarity if you have room to mount separate tweeters and crossovers. The best choice depends on how much installation complexity you accept and whether you prioritize convenience or soundstage precision.
How important is sensitivity when upgrading to 6×8 speakers?
Sensitivity affects how loudly a speaker plays for a given power input, so it matters if you plan to use the factory head unit without an amplifier. Higher sensitivity helps achieve louder, cleaner sound with limited power. If you plan to add an amplifier, sensitivity is less critical than power handling and impedance matching.
Can I install high power 6×8 speakers without an amplifier?
You can install speakers rated for higher power on a factory system, but you may not gain the speaker's full potential without an amplifier. High power ratings provide headroom and durability, but the factory radio might not deliver enough clean power to drive them loudly without distortion.
What should I watch for when replacing 6×8 door speakers?
Check mounting depth, bolt pattern, connector type, and whether the speaker includes a gasket or seal to prevent air leaks. Also inspect door panel clearance for tweeters and ensure wiring polarity is correct to maintain proper sound staging.
Conclusion
When choosing Scion xB 6×8 speakers, prioritize fitment, power handling, and the type of speaker that matches your installation goals. Mounting depth and bolt pattern determine whether a speaker will install cleanly, while sensitivity and RMS ratings influence loudness and headroom. Decide early whether you want the simplicity of coaxial replacements or the performance potential of component systems, and factor in build quality and installation hardware to minimize surprises. Balancing these factors will help you pick 6×8 speakers that deliver the sound and durability you expect in the Scion xB.
Explore More:
- Check out all Scion xB parts & accessories
- Explore Electronics
- Browse all Accessories






