Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the speakers in your Lincoln MKX can dramatically improve in-car audio clarity, imaging, and bass response. The right pair of 6×8 speakers will address common limits of factory units, like muddied mids, thin highs, or weak low-end impact, and make music sound more natural at everyday listening levels. This guide presents the top shortlisted 6×8 speakers chosen for the Lincoln MKX. We evaluated candidates on power handling, sound character, and installation fitment to help you pick the best option for your driving habits and audio goals. Read on to compare the main strengths and considerations before the product list.
Looking for other parts? See all Lincoln MKX parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | JBL GX8628 6×8" 2-Way Coaxial Car Speakers (Pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | Alphasonik AS268P 6×8 3-Way Car Speakers (2 Pairs) |  |
| Best Quality Built to a higher standard if you want something more solid | KICKER 6×8" CS Series Coaxial Speaker Upgrade Kit with Harness for Ford F-150 (4-Pack) |  |
| Best Budget The cheapest option that still gets the job done reliably | Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (pair, 4-count set) |  |
| Most Sold A high-volume bestseller chosen again and again | UTV Stereo Kicker DS Series 6×8 Coaxial Speaker and Harness Kit for Ford F-150 (4-Pack) |  |
| Best Value for Money The sweet spot between price and what you get | JBL CLUB 8620 5×7/6×8 2-Way Coaxial Car Speakers (Pair) |  |
| Best Overall The best all-around choice for most situations | KICKER 46CSC684 6×8 Coaxial Speaker Bundle with Metra Harnesses and 50ft Speaker Wire |  |
1. JBL GX8628 6×8" 2-Way Coaxial Car Speakers (Pair)
| Speaker Type | Coaxial 2-way |
|---|---|
| Frequency Response | 50Hz – 21kHz |
| Power Handling (each) | 180W peak / 60W RMS |
| Sensitivity | 92dB @ 2.83V |
| Nominal Impedance | 2.3 ohms |
The JBL GX8628 pair are 6×8-inch 2-way coaxial speakers built for straightforward factory-style upgrades in vehicles like the Lincoln MKX. They combine a Plus One polypropylene woofer cone with an edge-driven soft dome tweeter and a proprietary tweeter deflector to extend response to about 21 kHz while maintaining clean mids. Rated for 180 watts peak (60 watts continuous each), they work well on factory head units and can handle more power if you add a small amplifier. Installation is typically plug-and-play into standard 6×8 openings and the speakers are voiced individually to match common vehicle acoustic profiles. Practical benefits include improved clarity, stronger mid-bass than many stock speakers, and proven JBL durability from consistent customer feedback. Limitations are modest bass output compared with dedicated subwoofers and a lower nominal impedance that may draw more current from older head units, so pairing with a proper amp or confirming electrical compatibility on the Lincoln MKX is advisable.
Best for: Reliability-focused buyers who want a durable, factory-quality sound upgrade for a Lincoln MKX without extensive electrical work or custom enclosures.
Less Ideal for: Users seeking deep, room-shaking bass or a full aftermarket system focused primarily on SPL and low-frequency performance should consider adding a subwoofer or choosing a different speaker type.
- Clear high-frequency detail from edge-driven soft dome tweeter and tweeter deflector
- Improved mid-bass response using Plus One polypropylene woofer cones over typical factory speakers
- Handles elevated power levels (180W peak) so it tolerates mild aftermarket amplification
- Individually voiced for consistent sound across left and right channels
- Not a substitute for a dedicated subwoofer for deep low bass
- Lower nominal impedance could stress very old factory head units without an external amp
Verdict A rugged, factory-friendly 6×8 speaker upgrade for the Lincoln MKX that improves clarity and mid-bass while remaining reliable for everyday use.
2. Alphasonik AS268P 6×8 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92 dB |
| Frequency Response | 28 – 22,000 Hz |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws |
The Alphasonik AS268P kit supplies two pairs of 6×8 3-way coaxial speakers intended to replace factory door speakers in a vehicle. Installers get mounting screws, coaxial leads and basic hardware so you can swap them into the door panels with minimal fuss. The speakers are rated for 350 watts peak and 35 watts RMS each and use a 3-way dynamic driver layout with a mid/woofer and integrated tweeter to extend highs up to 22 kHz. In practical use they boost clarity and volume compared with many stock systems and work well driven by a factory head unit; several buyers noted clearer vocals and fuller midrange. They are not high-end competition speakers so bass depth is limited without adding a subwoofer, and their ferrite-based drivers are bulkier than neodymium designs which can matter in tight mount locations. Fitment can require simple adapter plates or rotating the speaker in certain doors. Expect a significant, cost-effective sound upgrade for casual listening but plan a sub or amplifier if you want deep low end or louder, distortion-free output at high volumes.
Best for: Convenience-driven buyers who want a quick, affordable factory-replacement upgrade to improve clarity and volume without aftermarket amplifiers or complex installation.
Less Ideal for: Audiophiles seeking deep, punchy bass or competition-level clarity should look at higher-RMS speakers and add an amplifier and subwoofer rather than this all-in-one budget kit.
- Comes as two pairs with mounting hardware and pigtail leads for straightforward swap into door locations
- 3-way coaxial design provides clearer vocals and extended treble compared with many factory speakers
- Decent sensitivity (92 dB) for good volume from a factory head unit without an amp
- Affordable option that noticeably improves stock audio for casual listeners
- Low RMS power means limited clean headroom and shallow bass unless paired with a sub or amp
- Ferrite magnets and larger motor structure can complicate fitment in shallow door pockets
- Not weatherproof so exposure to moisture in door cavities may reduce longevity
Verdict A practical, low-cost 6×8 replacement that lifts stock Lincoln MKX sound quality for convenience-focused owners but needs a sub or amp for real bass impact.
3. KICKER 6×8" CS Series Coaxial Speaker Upgrade Kit with Harness for Ford F-150 (4-Pack)
| Speaker Type | Coaxial |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 90 dB |
| Peak Power | 225 watts |
| RMS Power | 75 watts |
These KICKER CS Series 6×8 coaxial speakers are sold as a four-piece upgrade kit with two plug-and-play harnesses to simplify swapping into a compatible truck. The CS design pairs a 2-way woofer and PEI tweeter for broad frequency coverage, with large magnets and an extended voice coil aimed at tighter bass and improved linear excursion. The zero-protrusion tweeters and shallow mounting depth make the speakers practical for tight door or panel locations, while UV-treated poly-foam surrounds and durable materials help resist heat exposure. Included harnesses plug directly into the factory speaker connectors to speed installation without cutting wires. In use these speakers deliver clearer highs and stronger mid-bass than typical stock units, and they handle moderate power peaks while remaining easy to set up. Limitations are that this listing is intended for Ford F-150 fitment and may require additional adapters or mounting tweaks for other vehicles, and bass depth will still be limited compared with adding dedicated subwoofers. For buyers prioritizing on-road clarity and louder, cleaner factory-location sound, these are a solid high-quality upgrade option.
Best for: Performance-oriented buyers who want a high-quality factory-location speaker upgrade that boosts clarity and mid-bass without complicated installation. Ideal for owners who prefer louder, more detailed on-road sound while keeping a mostly stock install approach.
Less Ideal for: Those seeking deep, sub-level bass as a primary goal or buyers who need guaranteed fitment for a Lincoln MKX without additional verification should consider alternative solutions.
- Vehicle-specific harnesses allow plug-and-play installation with no cutting required
- Coaxial 2-way design and PEI tweeters improve clarity across highs and mids
- Extended voice coil and larger motor for cleaner mid-bass response
- UV-treated poly-foam surrounds and durable materials resist heat and sunlight
- Product is listed for Ford F-150 fitment and not explicitly specified for Lincoln MKX without verifying compatibility
- Does not replace the effect of a subwoofer for deep low-frequency extension
Verdict A performance-focused, easy-to-install 6×8 coaxial kit that noticeably improves clarity and mid-bass for a factory-location upgrade, but it is not a substitute for a subwoofer.
4. Hifonics ZS5768CX 5×7/6×8 Coaxial Car Speakers (pair, 4-count set)
| Impedance | 4 Ohms |
|---|---|
| RMS Power Handling (CEA426B) | 90 W |
| Max Power | 250 W |
| Frequency Response | 46 Hz – 20 kHz |
| Sensitivity | 88 dB |
The Hifonics ZS5768CX speakers are an affordable coaxial replacement sold as two pairs that fit common 5×7 or 6×8 openings. They use alpha-cellulose cones with rubber surrounds, a neo-mylar soft-dome 1-inch tweeter, and a passive Butterworth crossover to deliver full-range sound from factory speaker locations. In practical use these speakers are a straightforward dash or door swap to improve clarity over worn factory units and they can be driven directly from a factory head unit at moderate volumes. Notable features include braided tinsel leads for durable connections, a Kapton voice-coil former for heat handling, and an anti-resonant stamped-steel basket to limit distortion. Limits are typical for budget coaxials: sensitivity is modest so the loudest, bass-heavy listening may require an amplifier, and they are not waterproof so mounting locations exposed to moisture should be avoided. Overall they represent a cost-effective way to revive an in-car stereo without major modifications, provided you keep listening levels realistic for the speaker’s power handling.
Best for: Budget-conscious owners who want an inexpensive, direct-fit speaker upgrade to restore clarity and improve everyday listening from the factory system in a Lincoln MKX.
Less Ideal for: Audiophiles seeking deep bass or maximum volume without adding an amp should look at amplified or higher-end component options instead.
- Sold as two pairs so you can replace front and rear locations in one purchase
- Alpha-cellulose cone and rubber surround balance midbass punch with durability
- Neo-Mylar soft-dome tweeter and passive crossover deliver clearer highs without external DSP
- Stamped-steel basket and Kapton former help control distortion and heat during normal use
- Modest sensitivity and RMS rating mean high-volume, bass-heavy listening will likely need an external amplifier
- Not rated waterproof so unsuitable for exposed or moisture-prone mounting locations
Verdict A wallet-friendly, direct-fit coaxial set that noticeably upgrades factory sound in a Lincoln MKX for everyday listening but may need an amp for loud, bass-heavy use.
5. UTV Stereo Kicker DS Series 6×8 Coaxial Speaker and Harness Kit for Ford F-150 (4-Pack)
| Speaker Maximum Output Power | 200 Watts |
|---|---|
| Speaker Type | Coaxial |
| Connectivity Technology | Coaxial |
| Audio Driver Size | 6 Inches |
This bundle replaces stock 6×8 door speakers with DS Series 2-way coaxial drivers and includes vehicle-specific harnesses to simplify installation. Designed as a direct replacement package, it is intended to plug into a factory speaker connector so you can swap speakers without cutting or splicing. The speakers pair polypropylene cones, acoustic-foam surrounds, and a 1/2" dome tweeter to deliver clear midrange and crisp highs with a quoted 50 watts RMS (200 watts peak) and 90 dB sensitivity. In practice that makes music sound more detailed and vocal-centric compared with many aging factory units, though bass extension is limited by the small midrange cone. The included harnesses and trim tools make the job quick for a DIYer or technician, and UV-treated components help resist sun exposure in door locations. A notable limitation is that these are coaxial replacements optimized for clarity and ease of fit rather than deep bass, so buyers who want pronounced low-end will need an additional subwoofer or larger speakers. Fit and wiring depend on matching the vehicle's connector, so verify compatibility before installation.
Best for: Risk-averse mainstream buyers who want a factory-style, easy-to-install speaker upgrade that improves clarity and fidelity without complex wiring or modification.
Less Ideal for: Audiophiles seeking strong bass or owners wanting a high-power system without adding an external amplifier should consider alternative speaker and subwoofer combinations.
- Bundle includes four speakers plus harnesses and trim tools for a straightforward replacement
- Coaxial 2-way design with dome tweeter delivers clear highs and articulate midrange
- Plug-and-play harnesses avoid cutting and simplify installation
- UV-treated, thin-profile parts resist sun exposure in door locations
- Limited low-frequency output compared with larger speakers or a subwoofer
- Power rating is modest at 50 watts RMS per pair which may require a stronger head unit or amp for louder listening
Verdict A risk-averse, no-fuss replacement kit that brings clearer highs and mids to a factory system but will not deliver deep bass without added components.
6. JBL CLUB 8620 5×7/6×8 2-Way Coaxial Car Speakers (Pair)
| Speaker Type | 2-way coaxial |
|---|---|
| Woofer Diameter | 6 inches |
| Impedance | 3 Ohms |
| Peak Power | 165 watts each |
| RMS Power | 55 watts each |
The JBL CLUB 8620 is a 2-way coaxial speaker pair aimed at upgrading factory car sound without adding an amplifier. Each speaker uses a polypropylene woofer and a balanced dome tweeter with a supplied crossover, offering a frequency range that covers typical music playback and a sensitivity that helps them play loud from a stock head unit. Installation is the usual top-mount swap for 5×7/6×8 openings and the package includes multiple mounting adapters to fit different locations in the car. In practice these speakers provide clearer treble and noticeably tighter midbass compared with many stock MKX speakers, and reviewers report good performance when driven by modest head unit power or a small amp. Limitations are that small accessories like extra speaker lead wire are not provided and the 3 ohm impedance means some factory radios will push more current than 4 ohm speakers, so check compatibility. If you want a solid, affordable upgrade for your Lincoln MKX that improves clarity and punch without a full system overhaul, these are a practical pick.
Best for: Practical optimizers who want a cost-effective, noticeable sound upgrade for routine daily driving in a Lincoln MKX without committing to a full aftermarket system.
Less Ideal for: Audiophiles seeking reference-level detail or owners wanting a plug-and-play upgrade with every installation accessory included should look at higher-end kits or more complete packages.
- Balanced dome tweeter plus polypropylene woofer for clearer highs and solid midbass.
- Supplied crossovers make hooking up the coaxial components straightforward.
- Multiple mounting adapters included to fit 5×7 and 6×8 openings common in many vehicles.
- High sensitivity helps them play louder from a factory head unit without an amp.
- No extra speaker lead wires or spade connectors included, so you may need to source installation hardware.
- 3 ohm nominal impedance can present a heavier load for some stock radios compared with 4 ohm speakers.
Verdict A budget-friendly 6×8 upgrade that brings clearer highs and stronger midbass to a Lincoln MKX without needing a major system overhaul.
7. KICKER 46CSC684 6×8 Coaxial Speaker Bundle with Metra Harnesses and 50ft Speaker Wire
| Speaker Type | 6×8 coaxial |
|---|---|
| Tweeter | 1/2 PEI balanced dome |
| Impedance | 3.5 Ohms |
| Included Components | 4 speakers, Metra 72-5600 adapters, 50 ft 16‑gauge wire |
This kit combines KICKER 6×8 coaxial speakers with Metra 72-5600 wiring adapters and 50 feet of 16-gauge speaker wire to simplify replacing factory speakers in a Lincoln MKX. The KICKER drivers use polypropylene cones, a 1/2 PEI balanced dome tweeter and UV-treated surrounds to deliver clearer highs and improved low-end compared with many stock units; they are rated for modest RMS power and a high sensitivity that lets them play loudly from a factory radio. Metra harnesses make the physical swap straightforward without cutting vehicle wiring, and the included wire gives you extra length for routing or adding rear connections. Expect noticeably better vocal clarity and punchy mid-bass, especially when paired with an external amp or factory sub. Limitations include modest bass depth for listeners who want deep thump and some reports of harness polarity issues that require verification during install. Build and longevity are typical for value-oriented aftermarket speakers rather than premium pro-grade components.
Best for: A balanced all-round buyer who wants a straightforward, factory-style sound upgrade for their Lincoln MKX without needing extra parts or advanced tuning; good for owners who value clear mids and vocals from a stock radio.
Less Ideal for: Audiophiles seeking deep, amp-driven bass or users planning a high-power competition system should look to higher-end component speakers and a dedicated subwoofer instead.
- Complete kit includes four KICKER coaxial speakers plus vehicle-specific Metra harnesses and 50 ft of 16 AWG speaker wire for an easy one-purchase upgrade.
- Polypropylene woofer cones and PEI dome tweeters provide clear vocals and improved midrange over typical factory speakers.
- High sensitivity makes them play loud and clean from a factory head unit without needing immediate amplification.
- Metra 72-5600 adapters let you plug into Lincoln MKX speaker connectors without cutting factory wiring, speeding installation.
- Not engineered for deep, chest‑thumping bass—expect mid‑bass improvement but limited low‑end extension without a subwoofer.
- Some units and harness batches have reported reversed polarity on adapter leads so polarity should be checked during installation.
Verdict A convenient, factory-style 6×8 speaker upgrade for Lincoln MKX owners who want clearer vocals and louder playback from their stock system without a complex install.
Choosing the Right Lincoln MKX 6X8 Speakers: Key Factors to Consider
Mounting Dimensions and Fitment
Correct mounting dimensions are critical because they determine whether a 6×8 speaker will physically install in the Lincoln MKX doors or locations without major modification. Measure both the speaker cutout diameter and the mounting depth, and account for obstructions behind the panel such as window mechanisms or wiring. A speaker with a shallower depth can avoid trimming or adapter plates, while one that matches the factory bolt pattern simplifies reusing stock hardware.
Fitment matters for vibration control and accurate imaging. A speaker that sits flush and uses secure mounting points will seal better against the door panel, improving bass response and reducing rattles. Confirming fit before purchase reduces installation time and the need for custom fabrication.
Power Handling and Sensitivity
Power handling tells you how much amplifier power a speaker can accept without failure, while sensitivity indicates how loudly it plays from a given input level. For Lincoln MKX installations, match speaker RMS ratings with your head unit or amplifier output to avoid distortion or damage. If you plan to use the factory radio, choose speakers with higher sensitivity to get more volume without adding an amp.
Conversely, if you intend to add an aftermarket amplifier, prioritize speakers with higher power handling to take advantage of increased clean power. Balancing sensitivity and power handling affects dynamics, headroom, and reliability during demanding listening.
Sound Character and Frequency Response
Frequency response and the speaker's design determine tonal balance, including bass presence, midrange clarity, and treble extension. For in-door 6×8 speakers, look for models that offer controlled low-end without boominess and clear midrange for vocals and instruments. Tweeter quality and crossover integration influence detail and imaging, especially on coaxial designs where the tweeter is mounted on the woofer.
Consider your listening priorities: if you value punchy bass, emphasize a speaker with stronger low-frequency output or plan for a subwoofer. If vocal clarity matters, prioritize models with focused midrange response. Aim for balanced reproduction across the range to suit mixed music genres.
Coaxial Versus Component Options
Coaxial 6×8 speakers combine the woofer and tweeter in one assembly, offering simpler installation and a compact footprint. They are often the easiest upgrade for direct replacements in the Lincoln MKX and provide improved high-end detail over stock units. Component 6×8 setups separate tweeters and crossovers, which can yield more precise imaging and improved dispersion if you can locate the tweeters optimally within the cabin.
Choose coaxial speakers for straightforward swaps and limited mounting space, and consider component solutions if you prioritize sound staging and are willing to invest more installation effort. Both approaches can yield significant improvements when properly integrated with the vehicle’s acoustics.
Durability and Materials
Materials such as polypropylene, mica-filled cones, or woven composites affect both sound and longevity. Durable cones and treated surrounds resist humidity and heat inside a vehicle, extending service life. Metal baskets and corrosion-resistant hardware help maintain structural integrity over years of use.
Inspecting build features like reinforced mounting plates, weather-resistant tweeters, and quality crossovers can indicate a speaker designed for automotive conditions. Durable materials reduce the risk of voice-coil failure and deformation from temperature cycles and road vibration.
Installation Ease and Accessories
Installation complexity influences overall cost and time. Speakers that include mounting brackets, a selection of screws, and clear instructions reduce the need for additional parts. Plug-and-play connectors or compatibility with common automotive harnesses simplify wiring and help preserve factory wiring harnesses.
Also consider whether the speaker requires adapter plates, spacers, or custom grilles. If professional installation is not desired, pick models with straightforward mounting patterns and minimal disassembly. Planning for trim removal and wire routing ensures a clean, secure installation with minimal rattles.
FAQ
Will 6×8 speakers fit directly into my Lincoln MKX?
Many 6×8 speakers are designed to fit common vehicle openings, but fitment can vary by year and door configuration. Check mounting depth, bolt pattern, and cutout dimensions against the Lincoln MKX mounting points. If dimensions differ, adapters or shallow-mount options can avoid cutting or heavy modification.
Do I need an amplifier for Lincoln MKX 6×8 speakers?
It depends on the speakers and your audio expectations. Higher-sensitivity 6×8 speakers can perform well on a factory head unit, while lower-sensitivity, higher-power models will benefit from an amplifier to reach clean levels without distortion. Consider your listening habits and whether you value headroom and dynamic range.
Are coaxial 6×8 speakers a good upgrade over factory units?
Coaxial 6×8 speakers often provide a substantial improvement in clarity and high-frequency detail compared with many stock units because they include a dedicated tweeter and improved cone materials. They are a practical choice when you want noticeable gains with minimal installation complexity.
How important is mounting depth for 6×8 replacements?
Mounting depth is critical because inadequate clearance can prevent proper installation or cause interference with window mechanisms. Measure from the mounting surface to any obstacles behind the panel. Choosing a speaker with compatible depth avoids trimming or the need for custom spacers.
Can I improve bass response without changing to a larger speaker?
Yes, you can improve perceived bass by selecting a 6×8 speaker with stronger low-frequency extension and by sealing the speaker properly to the door panel. Adding damping materials to reduce panel resonance and, if needed, adding a subwoofer will further enhance low-end performance without changing speaker size.
How We Chose the Best Lincoln MKX 6X8 Speakers
We filtered options based on several automotive-audio specific criteria relevant to Lincoln MKX owners. First, we prioritized speakers that match common 6×8 mounting dimensions and depth constraints to ensure straightforward door or rear deck fitment. Second, we evaluated power handling and sensitivity to ensure compatibility with a range of factory and aftermarket amplifiers. Third, we assessed frequency response and cone materials to gauge expected tonal balance and durability in a vehicle environment. Fourth, we considered build quality features such as weather-resistant surrounds and robust baskets for long-term reliability. Fifth, we checked ease of installation including connector compatibility and included mounting hardware or adapters. We excluded products that require extensive custom modification, unusual mounting brackets, or that lacked clear automotive fitment information. We did not consider speakers engineered exclusively for marine or home audio use. The final selections balance practical fitment, dependable performance, and durability for routine driving conditions.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing Lincoln MKX 6×8 speakers, prioritize fitment and power compatibility first to ensure a straightforward installation and reliable performance. Balance sensitivity and power handling depending on whether you will use the factory head unit or add an amplifier. Next, evaluate sound character, materials, and whether you prefer coaxial convenience or component separation for improved imaging. Consider durability and included installation accessories to minimize extra work. Weigh these factors against your listening priorities to select the right 6×8 speakers for your Lincoln MKX.
Explore More:
- Check out all Lincoln MKX parts & accessories
- Explore Electronics
- Browse all Accessories
