Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the audio in your Infiniti QX60 starts with choosing the right 6×8 speakers for the factory locations. The right speakers improve clarity, tonal balance, and overall listening enjoyment while fitting the door and dash mounting constraints. This guide covers a shortlist of the top options that meet common fitment needs and performance goals. We evaluated candidates for sound quality, power handling, and installation practicality to help you pick speakers that match your listening preferences and your vehicle's space. Read on to see the top picks and key factors to weigh before you buy.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Kenwood KFC‑C6866S 6×8 2‑Way Car Speakers (Pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | Kicker KS-Series 6×8 Coaxial Car Speakers (Pair) |  |
| Best Quality Built to a higher standard if you want something more solid | KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Bundle with Harness for Ford F-150 (4-Pack) |  |
| Best Budget The cheapest option that still gets the job done reliably | JENSEN JS-Series JS6804 4-Way 5×7/6×8 Car Speakers (Pair) |  |
| Most Sold A high-volume bestseller chosen again and again | Alphasonik AS268P 6×8 inch 3-Way Car Speakers (2 Pairs) |  |
| Best Value for Money The sweet spot between price and what you get | JBL Club 8620 5×7/6×8 2‑Way Coaxial Car Speaker Pair |  |
| Best Overall The best all-around choice for most situations | ORION Cobalt CM6854 5×7/6×8 Mid-Range Bullet Loudspeakers (Pair) |  |
1. Kenwood KFC‑C6866S 6×8 2‑Way Car Speakers (Pair)
| Speaker Type | Coaxial |
|---|---|
| Speaker Size | 6×8 Inches |
| Impedance | 4 Ohms |
| Tweeter Diameter | 1 Inches |
| Maximum Power | 250 watts |
The Kenwood KFC‑C6866S pair replaces factory 6×8 speakers with a straightforward coaxial setup that emphasizes clear mids and crisp highs rather than deep bass. Installation is typical for a 6×8 retrofit and the low mounting depth helps them fit behind many factory grilles. The polypropylene/paper woofer and 1" PEI balanced-dome tweeter deliver a balanced sound that improves clarity over many aging OEM speakers when driven by a factory head unit. Included hardware and speaker cord make a basic swap simpler, though you may need speaker adapters or harnesses specific to the Infiniti QX60 to avoid extra modifications. These are not designed as high-power competition speakers so expect limited low-end punch unless paired with a dedicated amp or subwoofer. For a reliability-focused upgrade they offer consistent, predictable performance and sturdy construction, but audiophiles seeking big bass or extreme output should plan on additional amplification or a separate subwoofer to reach those goals.
Best for: A reliability-focused buyer who wants a straightforward, factory-style 6×8 speaker replacement for their Infiniti QX60 that improves clarity and holds up over time.
Less Ideal for: Not the best choice for listeners who want strong bass or very high output from door speakers alone without adding an amp or separate subwoofer.
- Balanced two-way design improves vocal clarity and treble detail compared with typical aging factory speakers
- Shallow mounting depth increases likelihood of fitting behind factory grilles in constrained QX60 door pockets
- Includes basic mounting hardware and speaker cord for a simpler swap
- 4 ohm impedance matches factory head unit outputs for reliable use without extra electronics
- Modest RMS power handling so bass and maximum volume are limited without an amplifier
- May require vehicle-specific adapters or harnesses for a clean plug-and-play install in the QX60
Verdict A dependable, easy-to-fit 6×8 factory-style replacement that improves clarity in the QX60 but needs an amp or sub for serious bass.
2. Kicker KS-Series 6×8 Coaxial Car Speakers (Pair)
| Rated Impedance | 4 ohm |
|---|---|
| Tweeter Size | 0.75" |
| Speaker Size | 6×8 |
| Manufacturer | Kicker |
The Kicker KS-Series 6×8 coaxial pair replaces factory speakers to deliver clearer highs and stronger mid-bass without an amplifier in many installs. Designed as a direct-fit style coaxial, these speakers use internally damped polypropylene cones and rubber surrounds to improve midrange detail and provide punchier low end compared with typical factory units. The 0.75" tweeter offers crisp highs and minimal protrusion so the speakers fit into many stock mounting locations without modification. Typical use is as a front or rear door upgrade driven by a factory or aftermarket head unit; they also respond well when paired with an amplifier or modest crossover tuning. Practical benefits include easier installation thanks to supplied brackets and wiring, robust construction for road use, and frequency extension that makes EQ changes meaningful. Limitations are predictable for a coaxial: while fuller than stock, they cannot match a dedicated component set for imaging or the deepest bass of a subwoofer, and very high-power amplification will require proper gain control to avoid damage.
Best for: Convenience-driven buyers who want an easy, noticeable sound upgrade over factory speakers with straightforward bolt-in installation and minimal door modification.
Less Ideal for: Audiophiles seeking the last word in soundstage or bass extension and owners planning heavy amplification or custom component systems should consider component speakers and a subwoofer instead.
- Direct-fit design with minimal tweeter protrusion works with most stock speaker openings
- Internally damped polypropylene cone and rubber surround for improved midrange clarity and durability
- Supplied hardware and spliced connectors simplify installation
- Handles higher volume without obvious distortion when properly powered and crossovers are used
- Coaxial design cannot match separate component systems for stereo imaging
- Limited low-bass extension compared with a dedicated subwoofer
Verdict A convenient, well-built 6×8 coaxial upgrade that noticeably improves clarity and punch over factory speakers without complicated installation.
3. KICKER 43DSC6804 6×8" DS Series Coaxial Speaker Bundle with Harness for Ford F-150 (4-Pack)
| Impedance | 4 Ohms |
|---|---|
| Sensitivity | 90 dB |
| Frequency Response | 45-20,000 Hz |
| Power (RMS/Peak) | 50 W RMS / 200 W Peak |
This KICKER bundle packages four 6×8" DS Series coaxial speakers with two vehicle harness pairs to simplify a direct-replacement install. The DS design pairs polypropylene woofers with a 1/2" dome tweeter and a ribbed surround to deliver clear mids, improved high-end detail, and stronger output than typical factory speakers; the spec sheet lists 50 watts RMS and 200 watts peak per pair with a 90 dB sensitivity. The included harnesses plug into factory wiring to avoid cutting and speed installation on supported vehicles. In practical use these speakers make the factory radio sound louder and cleaner, especially at higher volumes, and reviewers note noticeably better clarity and bass for casual listening without an external amp. Limitations: they are coaxial budget-performance speakers not intended for high-power aftermarket amplification or critical audiophile setups, and users should confirm wiring polarity during install since mismatches can affect midbass response. For a performance-oriented upgrade that stays close to factory fit and requires minimal modification, this kit is a straightforward option.
Best for: Performance-oriented buyers who want a noticeable, hassle-light sound upgrade that prioritizes louder, clearer playback from the factory stereo and quick installation.
Less Ideal for: Audiophiles seeking top-tier component separates or owners planning a high-power amplified system should consider higher-end component speakers and dedicated crossovers instead.
- Direct-fit harnesses included for plug-and-play installation without cutting on supported vehicles
- Polypropylene cone and ribbed surround deliver improved midbass and durability over paper stock speakers
- Built-in 1/2" dome tweeter improves high-frequency detail for clearer vocals and instruments
- Higher sensitivity (90 dB) yields louder output from factory head units without adding an amp
- Rated power and design are aimed at powered factory systems and are not ideal for use with high-power aftermarket amplifiers or serious component upgrades
- Bundle lists fitment for Ford F-150 which may not directly match Infiniti QX60 factory mounting or wiring without verification
Verdict A practical, performance-focused 6×8" coaxial bundle that gives a clear, louder factory-style upgrade with easy installation but is not meant for high-power audiophile systems.
4. JENSEN JS-Series JS6804 4-Way 5×7/6×8 Car Speakers (Pair)
| Speaker Design | 4-Way |
|---|---|
| RMS Power | 40 Watts |
| Peak Power | 160 Watts |
| Impedance | 4-Ohm |
| Frequency Response | 70Hz – 20kHz |
The Jensen JS6804 is a value-focused 4-way speaker pair sold as a direct-fit option for vehicles that accept 5×7 or 6×8 sizes, including the Infiniti QX60 when using compatible mounting locations. These speakers combine a 30mm Mylar balanced dome midrange and 15mm piezo tweeters with a polypropylene woofer cone to produce cleaner mid frequencies and crisp highs compared with many low-cost stock units. Rated for 40 watts RMS (160 watts peak) and 87 dB sensitivity, they work well on factory head units or modest aftermarket amplifiers without demanding extra power. Moisture-resistant polypropylene cones and butyl rubber surrounds help durability in door environments. Limitations are modest bass extension because the frequency response starts at 70 Hz and sensitivity is average, so they will not replace a subwoofer or higher-end component systems. Fitment requires checking the QX60 mounting depth and cutout for a proper installation and possibly adapter brackets for a secure fit. For a budget swap that improves clarity and treble detail, the JS6804 is a practical choice.
Best for: Budget-conscious owners looking to noticeably improve in-car clarity and treble detail on the Infiniti QX60 without adding amplifiers or expensive component sets.
Less Ideal for: Audio enthusiasts who want deep low-frequency output or high-power handling should consider component speakers plus a subwoofer or higher-end aftermarket options instead.
- 4-way design with dedicated midrange and tweeters for clearer vocals and highs
- Polypropylene woofer cone and butyl surround resist moisture and reduce distortion in door locations
- Works acceptably on factory head units thanks to moderate 40W RMS rating and 87 dB sensitivity
- Direct fit for 5×7/6×8 openings which simplifies replacement in compatible locations
- Frequency response begins at 70 Hz so bass is limited without a subwoofer
- No grilles included which may require additional parts for a finished install
Verdict A wallet-friendly, direct-fit 4-way speaker pair that improves midrange and treble for the QX60 but offers limited bass unless paired with a subwoofer.
5. Alphasonik AS268P 6×8 inch 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92 dB |
| Frequency Response | 28 – 22,000 Hz |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws |
The Alphasonik AS268P package supplies two pairs of 6×8, 3-way coaxial speakers intended as a direct-swap upgrade for factory door speakers. Typical installation replaces worn or weak factory 6x8s and uses the vehicle head unit for power; the kit includes pigtail leads, mounting screws, and basic hardware to simplify fitment. Notable features on paper are a quoted 350W peak (35W RMS each), 92 dB sensitivity, a broad 28–22,000 Hz frequency range, and a polypropylene cone with a separate tweeter for clearer highs. In real-world use these speakers reliably raise volume and clarity over many stock systems and are a good match when you want better vocal detail and midrange without adding an amplifier. Limitations are expected: the RMS power is modest so bass extension and headroom are limited unless paired with a subwoofer or amp, and build quality and long-term durability can vary compared with higher-end brands. Fitment may require minor orientation or adapter use on some vehicles. For a risk-averse buyer wanting an affordable, straightforward replacement, these are a practical upgrade with predictable results.
Best for: A risk-averse mainstream buyer looking for an inexpensive, factory-style speaker replacement to noticeably improve clarity over stock speakers without modifying the vehicle electrical system.
Less Ideal for: Audiophiles seeking deep bass, large dynamic headroom, or long-term premium durability should consider higher-end speakers and adding an amplifier or subwoofer instead.
- Includes two pairs plus pigtail leads and mounting screws for easier installation
- Quoted 92 dB sensitivity and wide frequency range for clearer highs and vocal detail
- Shallow 2.32 inch mounting depth helps fit many factory speaker locations
- Good value for replacing weak or failed factory speakers without adding an amp
- Low RMS power per speaker limits bass output and headroom under heavy listening
- Not water resistant so may be less durable in high-humidity or exposed locations
- Build and long-term reliability are below premium aftermarket speakers
Verdict A budget-friendly 6×8 3-way kit that improves clarity over factory speakers but needs a sub or amp for strong bass.
6. JBL Club 8620 5×7/6×8 2‑Way Coaxial Car Speaker Pair
| Speaker size | 5×7 / 6×8 |
|---|---|
| Power (RMS per speaker) | 55 W |
| Peak power (pair) | 330 W |
| Impedance | 3 Ohms |
| Frequency response | 65 Hz – 20 kHz |
The JBL Club 8620 is a budget-friendly 2‑way coaxial speaker pair intended as a direct replacement for common 5×7 or 6×8 car locations. It combines a polypropylene woofer with an edge‑driven PEI dome tweeter and a small external crossover to deliver a broad frequency response from about 65 Hz up to 20 kHz. In real use these speakers produce clear mids and crisp highs with respectable punch when driven by a factory head unit and notably better dynamics if paired with a small amp. Installation is typical for retrofit sizes and users report they fit many nonstandard openings with the supplied adapters, though you may need additional mounting hardware and speaker wire that are not included. The 3 ohm impedance and 55 W RMS per speaker means they can draw more current than higher impedance designs, so expect improved performance with a modest amplifier. If you want a clean, value‑oriented upgrade for cabin sound without a major system rebuild, these deliver good sound for the price but are not aimed at audiophile refinement or deep subbass reproduction.
Best for: Practical optimizers who want the most audio improvement for their money and prefer straightforward upgrades that improve everyday listening without a full aftermarket overhaul for their Infiniti QX60.
Less Ideal for: Buyers seeking high-end, critical listening or very deep bass should look at component systems with a dedicated subwoofer and higher-end drivers instead.
- Designed to fit 5×7 and 6×8 factory locations for easy retrofitting in many vehicles
- Balanced midrange with a PEI dome tweeter for clear highs and vocal detail
- Relatively high sensitivity and power handling for stronger output with a small amp
- Includes adapters and crossovers to support different mounting configurations
- No speaker wire or mounting screws included so you may need extra hardware to complete installation
- 3 ohm impedance can demand more current from a factory head unit, potentially benefitting from an external amplifier
- Not intended to deliver deep subwoofer-level bass or audiophile-grade detail
Verdict A cost‑effective way to upgrade Infiniti QX60 factory 6×8 locations for clearer mids and highs, best paired with a small amp for full performance.
7. ORION Cobalt CM6854 5×7/6×8 Mid-Range Bullet Loudspeakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| Power handling (RMS) | 250W RMS |
| Power handling (Max) | 1000W Max |
| Voice coil | 1.5" high-temperature |
| Efficiency | 92 dB |
The ORION Cobalt CM6854 is a midrange bullet speaker pair intended to upgrade a vehicle sound system where clearer mids and stronger high-frequency output are needed. Typical use is as door or rear-deck midrange replacements in cars, driven by a factory head unit or an amplifier for best results. Notable features include 250W RMS (1000W max) handling, a 1.5 inch high-temperature voice coil, 4 ohm impedance, and a bullet tweeter design that extends high-frequency response without severely impacting mid response. In practice these speakers produce loud, detailed vocals and crisp highs and they scale well when paired with an external amp. Caveats to plan for are the large magnet and overall size that can create fitment challenges in some factory openings and the lack of wireless or grille accessories included. They are best paired with proper speaker adapters or shallow-mount considerations on the Infiniti QX60 to avoid fit/clearance issues and to realize their power potential with a compatible amplifier.
Best for: Balanced buyers wanting a noticeable sound upgrade without committing to component crossovers, who prioritize clear mids and loud, energetic playback in daily driving and weekend listening.
Less Ideal for: Drivers seeking a drop-in, plug-and-play replacement for tight factory 6×8 openings without modifications should consider shallower or vehicle-specific speakers instead.
- High power handling (250W RMS, 1000W max) for loud, dynamic playback
- 1.5" high-temperature voice coil designed for heat tolerance under heavy use
- Bullet tweeter design extends high-frequency clarity while preserving mids
- Solid efficiency (92 dB) which helps volume with factory head units
- Large magnet and depth can cause fitment problems in some factory speaker locations
- No grills or mounting hardware specific to the Infiniti QX60 are included
Verdict A loud, clear midrange upgrade that delivers big-sounding mids and highs if you can accommodate the size and plan for proper mounting or amplification.
Choosing the Right Infiniti QX60 6X8 Speakers: Key Factors to Consider
Physical Fit and Mounting Depth
Correct physical fit is essential because the 6×8 speakers must sit properly in the Infiniti QX60’s factory locations without hitting internal door components or interfering with trim. Measure mounting depth and compare it to the space available behind the grille and inside the door to avoid clearance issues.
A speaker that fits cleanly will simplify installation and maintain factory aesthetics. If a deeper magnet or thicker basket is required, plan for spacers, shallow-mount options, or minor trim adjustments. Knowing the exact mounting bolt pattern and grille clearance reduces the chance of needing unexpected modifications.
Power Handling and Sensitivity
Power handling determines how much amplifier power a speaker can accept without damage, while sensitivity affects how loudly a speaker plays from a given amplifier or head unit. Choose speakers whose RMS power rating aligns with your factory or aftermarket amplifier to ensure efficient, distortion-free output.
Higher sensitivity speakers perform better with lower-powered factory head units, whereas lower sensitivity, higher power-handling speakers are better matched to dedicated amplifiers. Balance these specs to get clean dynamics and avoid clipping, which can cause damage and poor sound quality.
Coaxial Versus Component Configuration
Coaxial 6×8 speakers integrate a tweeter with the woofer in a single unit for a compact, straightforward upgrade. They are easier to install and require fewer adjustments. Component setups separate the tweeter and woofer for improved imaging and more precise crossover control, but they need more planning for tweeter placement and wiring.
Choose coaxial speakers if you want a direct swap with minimal work. Opt for component speakers if you are focused on soundstage, can accommodate tweeter placement in the cabin, and are comfortable with a slightly more involved installation.
Frequency Response and Tonal Balance
A speaker’s frequency response affects how it reproduces bass, mids, and highs, which shapes the overall tonal balance in the QX60’s cabin. Look for speakers that offer a wide and smooth response through the midrange and treble to preserve vocals and instrument detail, with sufficient low-end extension for fuller sound.
Avoid speakers with overly accentuated peaks that can sound harsh in close-quarters listening. Consider how cabin acoustics and door panels will influence perceived tone and choose a speaker whose response complements the vehicle’s interior.
Build Quality and Materials
Durable materials for cones, surrounds, and tweeters contribute to consistent performance and longer life in the variable conditions of a vehicle interior. Materials like treated polypropylene, polypropylene blends, or well-damped composites resist moisture and temperature changes, while robust surrounds maintain cone control.
High-quality tweeters and reliable crossover components also reduce distortion and maintain clarity over time. Prioritizing build quality reduces the likelihood of failure and preserves sound quality through daily use.
Installation Ease and Hardware
Installation considerations include the availability of vehicle-specific mounting brackets, grille clearance, connector compatibility, and whether adapters are needed for the Infiniti QX60. Speakers that include hardware for common installations or align with factory bolt patterns reduce installation time and complexity.
Also consider whether the speaker’s terminal design accommodates factory wiring without splicing. Clear installation instructions and readily available mounting accessories make upgrades more approachable for DIYers and reduce the need for professional installation.
FAQ
Will any 6×8 speaker fit the Infiniti QX60?
Not every 6×8 speaker will fit without checking measurements. You should verify mounting depth, bolt pattern, and grille clearance against the Infiniti QX60’s factory locations. Some speakers designed with deeper magnets or larger baskets may require spacers or minor trim adjustments.
Should I choose coaxial or component 6×8 speakers for the QX60?
Choose coaxial speakers if you want a simple, direct replacement with minimal installation work. Component speakers can offer better imaging and clarity if you are willing to plan tweeter placement and handle a more involved installation. The right choice depends on your desired soundstage and willingness to modify the vehicle.
How important is power matching between my head unit and new speakers?
Power matching matters because an underpowered speaker with low sensitivity may sound quiet, while driving a speaker beyond its RMS rating can cause distortion and damage. Match the speaker’s RMS power handling with the output capability of your head unit or amplifier to achieve cleaner sound and reliable performance.
Do I need new mounting hardware for replacing door speakers?
You may or may not need new hardware depending on the speaker’s design and the Infiniti QX60’s factory mounting points. Some speakers are made to match common bolt patterns and include installation brackets or adapters. Check the product specs for included hardware and confirm compatibility with the vehicle’s mounting locations.
Can upgraded 6×8 speakers improve bass in the QX60?
Upgraded 6×8 speakers can improve mid-bass clarity and punch compared with worn or low-quality factory units, but large low-frequency extension is limited by the small woofer size and vehicle cabin acoustics. For deeper bass you may need to consider complementary upgrades such as a dedicated subwoofer or amplifier to support lower frequencies.
How We Chose the Best Infiniti QX60 6X8 Speakers
We focused on speakers that are suitable specifically for the Infiniti QX60 and prioritized components that address common fitment and acoustic challenges for this vehicle. Key evaluation criteria included physical fit and mounting depth to ensure compatibility with the QX60’s factory locations, measured power handling and sensitivity to match typical factory and upgraded head units, and frequency response characteristics that influence clarity and bass presence in an SUV cabin. We also assessed build quality and materials for long-term reliability, installation ease including connector compatibility and required adapters, and the availability of coaxial and component configurations to suit different upgrade approaches. Products that lacked clear fitment guidance for the Infiniti QX60, did not provide mounting specifications, or used low-quality materials were excluded. We did not include items that require extensive custom fabrication or modifications beyond common installation steps. Our final list reflects options that balance acoustic performance with practical installation and vehicle-specific fit considerations.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing Infiniti QX60 6×8 speakers, prioritize physical fit and matching power handling to your source equipment. Consider whether you want the simplicity of coaxial units or the superior staging of component setups, and factor in frequency response to achieve the tonal balance you prefer. Tradeoffs include installation complexity versus sonic improvements and sensitivity versus power requirements. Focus on speakers that fit the QX60’s mounting constraints, use durable materials, and match your amplification to get reliable, high-quality audio.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Electronics
- Browse all Accessories
