Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the speakers in an Infiniti G37 can make the cabin sound more detailed, with cleaner mids and tighter bass. Choosing the right 6×8 speakers matters because fit, power handling, and mounting depth all affect installation and long-term performance. This guide covers a short list of top picks for the G37 with attention to real installation factors and listening goals. You will find products shortlisted for their fit and sound qualities, and we explain the criteria used to evaluate them before the product list.
Looking for other parts? See all Infiniti G37 parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | ORION Cobalt CM6854 6×8 Midrange Bullet Loudspeakers (Pair) |  |
| Best Quality Built to a higher standard if you want something more solid | Kicker KS-Series 6×8 Coaxial Car Speakers (Pair) |  |
| Best Value The sweet spot between price and what you get | JBL Club 8620 5×7/6×8 2-Way Coaxial Car Speakers (pair) |  |
| Best Budget The cheapest option that still gets the job done reliably | Jensen JS6804 4-Way 5×7/6×8 Car Speakers (Pair) |  |
| Highest Rated A top-rated pick with lots of positive feedback | Kenwood KFC‑C6866S 6×8 2‑Way Car Speakers (Pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | KICKER DS 6×8-Inch Coaxial Car Speakers (Pair) |  |
| Best Seller A high-volume bestseller chosen again and again | Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs) |  |
ORION Cobalt CM6854 6×8 Midrange Bullet Loudspeakers (Pair)
| Speaker Size | 7.81 Inches |
|---|---|
| Impedance | 4 Ohms |
| Power (RMS) | 250W RMS |
| Voice Coil | 1.5" High-temperature voice coil |
| Sensitivity | 92 dB |
The ORION Cobalt CM6854 pair are 6×8 midrange bullet loudspeakers built to deliver loud, clear midrange and upper frequencies in a vehicle audio system. They are typically used as direct replacements or upgrades in factory speaker locations and perform best when paired with at least modest amplification thanks to a 250W RMS handling and 1000W max rating. Notable features include a 1.5" high-temperature voice coil, 4 ohm impedance, and a bullet-style tweeter that extends high frequencies without sacrificing mid response. In practice they offer high sensitivity and punchy, forward mids that make vocals and lead instruments stand out, and many users report they stay clean at high volume. Limitations for an Infiniti G37: their large magnet and overall frame can cause fitment challenges in some door pockets and rear deck openings, and you may need adapter plates or longer fasteners to install them neatly. Also they are optimized for impact and loudness rather than ultra-transparent audiophile neutrality, so they benefit from some EQ or an external amp for best balance.
Best for: Balanced all-round buyers who want a noticeable, reliable upgrade to their Infiniti G37 sound system without chasing audiophile perfection and who prefer a product that emphasizes clarity and volume.
Less Ideal for: Audiophiles seeking the most neutral, studio-like reproduction or owners unwilling to modify mountings or buy adapter hardware should consider more conservative, factory-fit replacements.
- High power handling (250W RMS) and 1000W peak for loud, distortion-resistant output when amplified
- Bullet-style mid/tweet design extends high frequencies while keeping mids present
- High sensitivity and efficient voice coil deliver strong output from factory head units or amps
- Shallow mounting depth (listed 2.57") helps installation in tighter speaker locations
- Large magnet and frame can obstruct fitment in some factory speaker cutouts without adapters or modification
- Not aimed at the most neutral hi-fi sound; favors punch and loudness over ultra-accurate tonal balance
Verdict: A loud, efficient 6×8 midrange upgrade that delivers clear, powerful mids for the Infiniti G37 but may require adapters or minor fitment work to install.
Kicker KS-Series 6×8 Coaxial Car Speakers (Pair)
| Speaker size | 6×8 |
|---|---|
| Tweeter size | 0.75 inch |
| Impedance | 4 Ohm |
| Design | 2-way coaxial |
| Recommended amp power | 15-75 W |
The Kicker KS-Series 6×8 coaxial pair is a direct-replacement-style speaker set built to deliver clearer highs and tighter midbass than typical factory units. Designed for door or rear deck installation, these speakers use damped polypropylene cones and robust rubber surrounds to push louder, cleaner midrange and chesty bass without needing heavy equalization. The .75 inch tweeters and updated crossovers give defined highs that stay smooth at higher volumes, while the 4-ohm impedance pairs well with most factory or aftermarket amplifiers. Practical installation features include minimal tweeter protrusion for an easy fit and included mounting brackets and wiring pigtails that simplify swapping into existing openings. Limitations to consider are that these are coaxials rather than component speakers, so imaging and extreme high-frequency detail will not match a separated tweeter setup, and very low bass remains limited compared with adding a subwoofer. For a performance-minded upgrade in a compact speaker size, these balance power handling and clarity without requiring complex installation or DSP tuning.
Best for: Performance-oriented buyers who want a noticeable upgrade over factory speakers without a full component overhaul and prefer direct-fit, track-capable improvements.
Less Ideal for: Audiophiles seeking top-tier staging with separate tweeters or buyers who need strong low-end output without adding a subwoofer should look at component systems or add a dedicated woofer instead.
- Updated polypropylene cone and rubber surround improve midrange detail and durability
- .75" tweeter with crossover yields clearer, non-shrill high frequencies at higher volumes
- Minimal tweeter protrusion makes for straightforward drop-in installation into many factory locations
- 4-ohm impedance works well with common factory and aftermarket amplifiers
- Coaxial design limits ultimate imaging and high-frequency separation compared with component systems
- Does not produce deep sub-bass on its own so a separate subwoofer is needed for very low frequencies
Verdict: A performance-focused, direct-fit 6×8 coaxial that significantly improves clarity and loudness over factory speakers while keeping installation simple for the Infiniti G37.
JBL Club 8620 5×7/6×8 2-Way Coaxial Car Speakers (pair)
| Power (peak per pair) | 330 watts per pair |
|---|---|
| Power (RMS per speaker) | 55 watts each |
| Impedance | 3 Ohms |
| Sensitivity | 93 dB |
| Frequency response | 65 Hz – 20 kHz |
The JBL Club 8620 is a 5×7/6×8 two-way coaxial speaker pair intended as an affordable upgrade for factory car sound systems. In practice you replace the factory rear or front 6×8 locations in an Infiniti G37 with these speakers to gain stronger midbass and clearer highs from the PEI dome tweeters. The speakers are built around a polypropylene woofer cone with a rubber surround and include compact crossovers to protect the tweeter. Measured specs list 55 watts RMS per speaker and a 93 dB sensitivity, which explains why they play loud enough from a factory head unit and respond well when paired with a small amplifier. Practical advantages are good midrange clarity, punchy low end for the price, and a compact tweeter with multiple mounting options. Limitations include minimal wiring supplied and basic mounting hardware that may require adapters or extra foam sealing to avoid air leaks and optimize bass. Installation on a G37 is straightforward but expect to supply speaker wire and some small fasteners for a clean fit.
Best for: A practical optimizer seeking the most sound improvement for their Infiniti G37 without overspending, who values straightforward upgrades that noticeably improve everyday listening.
Less Ideal for: Audiophiles chasing extreme fidelity, precise imaging, or those who prefer a full component speaker and matched amplifier solution should look elsewhere.
- Designed for 5×7/6×8 openings so fits common G37 speaker locations
- Polypropylene woofer with rubber surround for durable, punchy midbass
- Edge-driven PEI tweeter offers clear high frequency detail
- Reasonable sensitivity (93 dB) that performs well on factory head units and small amps
- No speaker wire included so you must supply your own leads and connectors
- Mounting adapters and foam tape in the box are minimal which can lead to imperfect seals and reduced bass
- 3 ohm impedance may draw more current than some factory outputs without an amp
Verdict: A budget-friendly 6×8 replacement that delivers punchy, clear sound in an Infiniti G37 but requires extra wiring and mounting prep for best results.
Jensen JS6804 4-Way 5×7/6×8 Car Speakers (Pair)
| Speaker Design | 4-Way |
|---|---|
| RMS Power | 40 Watts |
| Peak Power | 160 Watts |
| Impedance | 4-Ohm |
| Frequency Response | 70Hz – 20kHz |
The Jensen JS6804 pair is a budget 4-way speaker set built to replace 5×7 or 6×8 factory speakers and deliver a noticeable improvement over basic stock units. In a typical installation into the Infiniti G37’s 6×8 door locations, the 4-way design with a Mylar balanced dome midrange and a polypropylene woofer brings clearer mids and controlled highs while maintaining decent low-end for day-to-day listening. The speakers are moisture-resistant and use a butyl rubber surround for longevity in a car environment. With a nominal impedance of 4 ohms and 40 watts RMS handling per pair, they run well on the G37’s factory amplifier or a modest aftermarket head unit without needing additional power. Limitations include a modest sensitivity and a frequency response that does not extend deep into sub-bass, so listeners who want strong low-frequency punch will want a dedicated woofer or more powerful amplification. Fitment is aimed at direct replacement of 5×7/6×8 openings and follows a straightforward install process.
Best for: Budget-conscious drivers who want a clear, affordable upgrade from factory speakers in their Infiniti G37 without adding an external amp or swapping to a component system.
Less Ideal for: Audiophiles seeking deep bass or high-output systems for SPL testing should consider component speakers plus a subwoofer or higher-powered alternatives instead of this pair.
- 4-way design with dedicated midrange and tweeter for clearer vocals and highs
- Polypropylene woofer cone and butyl surround resist moisture and reduce distortion
- Compatible with 4-ohm factory amps so it works with the G37’s stock system without extra power
- Compact mounting depth for direct replacement into 6×8 door openings
- Limited low-frequency extension compared with larger or component systems
- 87 dB sensitivity is modest so maximum loudness is constrained on low-power head units
Verdict: A cost-effective, factory-friendly 4-way replacement that improves clarity in the G37 but will not satisfy buyers chasing deep bass or high-volume output.
Kenwood KFC‑C6866S 6×8 2‑Way Car Speakers (Pair)
| Speaker Type | Coaxial |
|---|---|
| Impedance | 4 Ohms |
| Power (Max) | 250 watts |
| Tweeter Diameter | 1 Inches |
| Woofer Diameter | 8 Inches |
The Kenwood KFC‑C6866S set replaces factory 6×8 speakers with a straightforward coaxial upgrade that emphasizes clear mids and crisp highs. Installation is typical for 6×8 replacements and the shallow 5/16" mounting depth helps with fitment in vehicles that have limited speaker clearance. The polypropylene cone woofer provides solid midbass presence without requiring an external amp while the 1" PEI balanced‑dome tweeter lifts the high end for improved clarity over many stock speakers. Kenwood also enlarged the magnet circuit and added a sound field enhancer to sharpen imaging. Expect reliable day‑to‑day performance and easy driveability from OEM head units, but do not expect deep bass from this coaxial pair; they are not a substitute for a subwoofer or a powered component system. Overall, these are a sensible, dependable replacement that improves clarity and midrange punch without complicated tuning or amp upgrades.
Best for: Reliability‑focused buyers who want a durable, no‑fuss 6×8 replacement that improves clarity and midrange on a factory system while keeping installation simple.
Less Ideal for: Audiophiles seeking deep bass or component separation or buyers who want a powered solution without adding a subwoofer or amplifier.
- Shallow 5/16" mounting depth for easier fitment into tighter 6×8 openings
- Polypropylene woofer offers solid midbass and durability for daily driving
- 1" PEI balanced‑dome tweeter improves high‑frequency clarity over typical stock speakers
- Simple wired coaxial design works with factory head units without extra amplification
- Not designed for strong low‑bass output so a subwoofer is required for deep bass
- No vehicle‑specific wiring harness included which may require adapter or splicing
Verdict: A dependable, easy‑to‑fit 6×8 coaxial upgrade that improves clarity and midrange for everyday use but will not replace a subwoofer for deep bass.
KICKER DS 6×8-Inch Coaxial Car Speakers (Pair)
| Speaker Type | Coaxial |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 90 dB |
| Peak Power Handling | 200W |
| Frequency Response | 45-20k hz |
The KICKER DS 6×8 coaxial speakers are a straightforward drop-in upgrade intended to replace factory door speakers with minimal modification. They pair an 8-inch polypropylene woofer with a zero-protrusion PEI dome tweeter to deliver clearer highs and stronger mid-bass than typical factory units. Installation is usually simple in vehicles that accept 6×8 replacements and the speakers are tuned for high sensitivity so they play loud from a factory head unit without needing an amp. Notable touches include ribbed foam surrounds for durability and a motor design focused on output. Practical benefits are improved clarity, punchier sound, and wide vehicle fitment among cars that use 6×8 openings. Limitations are that they are not waterproof and some doors may require mounting tape or minor trimming to seal perfectly; they also do not replace a dedicated subwoofer for deep bass. For an Infiniti G37 these speakers provide an easy path to noticeably better door-level sound while keeping installation simple.
Best for: Convenience-driven buyers who want a simple, factory-style sound upgrade that installs quickly and improves clarity without adding amplifiers or complex wiring.
Less Ideal for: Audiophiles seeking deep bass or fully weatherproof speakers, and owners who plan to build a high-power aftermarket system around large amplifiers should look elsewhere.
- Drop-in design fits common 6×8 openings for quick installation
- High-sensitivity motor delivers louder output from a factory head unit
- PEI dome tweeter provides clear, non-intrusive highs
- Ribbed UV-treated foam surrounds enhance durability in door environments
- Not waterproof so exposure to moisture can be a concern in poorly sealed door assemblies
- May not fully seal to some door panels without additional mounting tape or shims
- Does not deliver deep sub-bass; a separate subwoofer is needed for low-end extension
Verdict: A convenient, drop-in 6×8 upgrade that gives the Infiniti G37 clearer highs and stronger mid-bass without extra amps, but not a substitute for a subwoofer or waterproof speaker.
Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Frequency Response | 28 – 22,000 Hz |
| Sensitivity | 92dB |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws |
The Alphasonik AS268P ships as two pairs of 6×8 three-way coaxial speakers intended as a direct-swap upgrade for factory door units. In real-world use they replace weak factory speakers to deliver clearer mids and more presence up top thanks to the three-way design and separate tweeter, while the woofer provides acceptable mid-bass for deck-powered systems. The kit includes pigtail leads, mounting screws, and basic hardware to simplify installation into compatible doors. Performance is best with a factory head unit or a modest aftermarket deck; bass depth is limited so buyers who want full low-end should add a powered sub or an amplifier. Build quality and materials are typical for a value-priced speaker: installation is straightforward but some vehicles may need adapter plates or shallow mounts to clear window mechanisms. Overall these are a practical, low-cost replacement for factory speakers on vehicles that accept 6×8 units and where a full amplifier and subwoofer are not part of the plan.
Best for: Risk-averse mainstream buyers looking for an affordable, straightforward factory-replacement upgrade for their Infiniti G37 who prioritize reliability and a clear, noticeable step up from stock sound without complex amplification.
Less Ideal for: Audiophiles seeking deep bass or competitive sound quality and owners planning a high-power amplified system should look at higher-end component speakers and a dedicated subwoofer instead.
- Sold as two pairs so you can replace all four door speakers at once
- Three-way coaxial design improves midrange and treble detail over many factory speakers
- Includes pigtails and mounting screws to simplify direct replacement installs
- Limited low-frequency output without a sub or external amplifier
- Not water resistant so not suited for exposed or wet mounting locations
Verdict: A budget-friendly, full-set 6×8 replacement that noticeably improves clarity over factory speakers on the Infiniti G37 but needs a sub or amp for stronger bass.
Choosing the Right Infiniti G37 6X8 Speakers: Key Factors to Consider
Physical Fit And Mounting Depth
Confirming the speaker's physical dimensions and mounting depth is critical because limited clearance behind the door panel can prevent proper installation. Measure the available depth in the G37 door cavity, including any factory wiring harness and vapor barrier, and compare that to the speaker's specified mounting depth to avoid rubbing or the need for extensive modification.
Mounting pattern and bolt spacing determine whether an adapter or custom bracket is required. Speakers that match the OEM mounting holes save time and maintain a secure fit, while those requiring large modifications can increase installation time and risk of rattles if not properly secured.
Power Handling And Sensitivity
Power handling, given as RMS and peak values, indicates how much continuous power a speaker can accept without damage. Choose speakers with RMS ratings that match your head unit or amplifier output to avoid underpowering or overpowering, which can lead to distortion or failure. Sensitivity, measured in decibels at 1 watt/1 meter, shows how efficiently a speaker converts power into volume; higher sensitivity helps achieve louder sound from a lower-powered source.
Balancing RMS and sensitivity helps you achieve consistent volume and headroom. If you plan to use an external amplifier, prioritize speakers with higher power handling and robust motor structures to handle increased output without distortion.
Frequency Response And Sound Character
A speaker's frequency response range provides a general idea of how it reproduces bass, mids, and highs. For 6×8 speakers in the G37, aim for models that deliver clear midrange and controlled low end because these drivers often cover much of the vocal and instrument range in a door-mounted configuration. Extended high-frequency response or a dedicated tweeter can improve clarity and imaging.
Sound character also depends on cone material and design. Stiffer cones tend to be more accurate and reduce breakup at higher volumes, while more compliant surrounds can enhance perceived bass. Consider the type of music you listen to and whether you prefer a neutral, balanced presentation or a warmer, bass-forward sound.
Crossover Design And Tweeter Integration
For coaxial units, the built-in crossover and tweeter placement determine how well the speaker handles highs and the overall tonal balance. Look for crossovers that provide a smooth handoff between the woofer and tweeter to avoid a gap or overlap in the critical midrange. Good coaxial designs keep the tweeter aligned to preserve imaging and stage clarity from a door-mounted position.
If using component speakers, consider the quality of the included external crossover network and tweeter mounting options. Component systems allow more flexibility in placement, which can improve sound staging, but they require more planning during installation.
Durability And Materials
Car interiors are subject to temperature swings, humidity, and UV exposure, so materials matter for longevity. Look for cones made from treated paper, polypropylene, or composite materials that resist warping and moisture. Surround materials such as rubber or treated foam affect both longevity and excursion capability; rubber surrounds typically offer longer service life in a vehicle environment.
Also check the magnet and basket construction for corrosion resistance and rigidity. A solid basket reduces resonance that can muddy sound, and corrosion-resistant components help maintain performance over years of use.
Installation Ease And Compatibility
Consider how the speaker integrates with the Infiniti G37's factory wiring and mounting hardware. Speakers that use standard connector types or include common adapters will simplify a plug-and-play installation. Also evaluate whether the speaker requires new grills, spacers, or modifications to the door panel; less invasive installs reduce the chance of trimming errors or interior damage.
Access to installation guides, clear specification sheets, and community feedback on fitment can speed up the process. If you are not doing the install yourself, factor in how accessible the speakers are for a professional installer to minimize labor time and potential fitment issues.
Why Upgrade the Infiniti G37 6X8 Speakers
The factory 6×8 speakers in the Infiniti G37 are designed around cost, packaging, and general usability rather than musical fidelity. Replacing them can deliver clearer vocals, tighter bass, and a more open midrange without changing the head unit or adding large subwoofers. Upgrading is one of the highest-impact improvements you can make to the car audio experience for relatively little cost and effort.
An aftermarket set of 6×8 speakers tailored to the G37 resolves common factory limitations such as limited cone excursion, basic tweeter integration, and low sensitivity. If you spend time driving with music at realistic listening levels, a focused upgrade will reduce distortion at mid and high volumes and reveal details that the stock speakers tend to bury.
When planning an upgrade, think about realistic goals. Do you want cleaner daily listening, louder sound for road trips, or the foundation for a future amplifier and subwoofer? The answers will shape whether you prioritize sensitivity, power handling, or a speaker set with component-level crossovers.
- Noticeable step-up in clarity and imaging with minimal changes to the car
- Improved dynamic range and reduced distortion at moderate volumes
- A good first upgrade before investing in amplifiers or subwoofers
Fitment and Mounting Specifics for the G37
The Infiniti G37 accepts 6×8 speakers in several locations depending on the body style and trim. Before buying, confirm the exact mounting location, bolt pattern, and available depth in the door or rear panel where you plan to install new 6x8s. Some G37s have shallow mounting pockets that limit how deep a woofer magnet or basket can be, so measure with the factory speaker removed.
When selecting 6×8 car speakers for the G37, check whether adapters or spacers are needed to clear window mechanisms, door braces, or tweeter pods. A thin polymer spacer can solve many clearance problems without modifying the door structure. If the new speaker sits further into the cabin than stock, verify that the trim and grille still fit and that the speaker does not contact any internal parts during window operation.
Retaining the factory wiring and connector is often possible, but confirm terminal polarity and connector type before final installation. If you need to solder or crimp new connectors, use heat-shrink tubing and corrosion-resistant terminals to ensure a durable electrical connection.
- Measure mounting depth and bolt pattern before purchasing
- Use spacers or adapter plates to maintain factory fit when needed
- Protect wiring connections with proper terminations and heat shrink
Coaxial Versus Component Options for the G37 Interior
Coaxial 6×8 speakers provide a convenient, all-in-one upgrade that includes a mid/bass cone and a mounted tweeter. They are generally easier to install and require no additional crossovers, making them a practical choice for a straightforward replacement. In the G37, coaxial installations typically deliver a significant improvement over stock while keeping installation time and complexity low.
Component 6×8 speaker systems separate the tweeter from the woofer and use an external or inline crossover to route frequencies. This allows more precise placement of the tweeter for improved imaging and soundstage in the relatively compact G37 cabin. Component setups can produce a clearer high end and better stereo focus when tweeters are mounted higher in the dash or sail panels.
Deciding between a 6×8 coaxial speakers arrangement and a 6×8 component speakers setup depends on your priorities. Choose coaxials for quick, cost-effective gains and limited interior modification. Choose components if you want improved staging and are willing to spend more time on placement and tuning.
- Coaxials: simpler, faster install, good all-round improvement
- Components: better imaging and treble clarity with deliberate tweeter placement
- Consider door sealing and speaker baffles to maximize performance for either option
Power Handling, Amplification, and Sound Tuning
Matching the speaker to the available power is key to both longevity and sound quality. Many quality 6×8 drivers for the G37 are designed to handle more power than the factory radio can supply. Adding a modest amplifier unlocks cleaner dynamics, tighter bass, and lower distortion. For drivers marketed as high-power 6×8 speakers, confirm nominal and peak power ratings and choose an amp that provides clean power within the speaker's recommended RMS range.
Sensitivity ratings influence how loud a speaker will play with a given wattage. If you prefer loud, efficient systems without an external amp, favor higher-sensitivity 6×8 inch car speakers. If you plan to add an amplifier, prioritize power handling and low distortion over raw sensitivity.
Once installed, spend time on basic tuning. Set gains conservatively so the amp does not clip, and use high-pass filters to protect the mids from excessive low-frequency content. Small adjustments to the source unit's EQ and time alignment, where available, will help the speakers integrate and improve clarity in the G37 cabin.
- Pair high-power drivers with an amp sized to the speaker's recommended RMS
- Choose higher sensitivity for amp-free upgrades; choose power handling for amplified systems
- Use conservative gain staging and a high-pass filter to protect mids and improve clarity
Installation Best Practices and Long-term Reliability
A reliable installation extends speaker life and preserves sound quality. Use corrosion-resistant screws and avoid overtightening to prevent basket warping. Seal the door baffle or speaker flange with a thin layer of butyl or closed-cell foam to prevent air leaks that cause muddiness in the low mids.
For 6×8 speaker replacement in the G37, consider adding a simple foam baffle or gasket behind the speaker cone to isolate the driver from moisture and road noise. Weather exposure and door moisture can accelerate cone and adhesive degradation. Proper sealing also improves low-frequency response by preventing midrange cancellation from cabinet leaks.
Wire management matters. Route speaker wire away from power cables and moving parts, and secure it with clips or zip ties. If you upgrade to 6×8 aftermarket speakers that include separate tweeters, plan wiring runs and mounting points before finalizing the speaker positions. Test the system at low volume to confirm correct polarity and then gradually increase listening levels to validate the installation.
- Seal speaker flanges to prevent air leaks and improve low-mid response
- Use corrosion-resistant hardware and avoid overtightening
- Protect wiring from moisture and moving parts; confirm polarity before final mounting
How We Chose the Best Infiniti G37 6X8 Speakers
We focused on factors that matter specifically when replacing the factory speakers in an Infiniti G37. Selection began with products that physically fit the G37 door openings or require minimal modification, and that offer documented mounting depth and mounting pattern details. We prioritized speakers with clear specifications for RMS and peak power handling, frequency response that preserves vocals and midrange clarity, and durable cone and surround materials suited to a car environment.We also considered ease of installation, including compatibility with common wiring and whether adapters or brackets are typically required. Reliability and build quality were judged by material choice and construction features rather than brand claims. We excluded options that lack clear fitment data, ambiguous specifications, or designs intended only for non-automotive use. The final shortlist emphasizes fit, power handling, sound character, and installation practicality for the Infiniti G37.
Our full evaluation process is outlined in our review methodology.
FAQ
Will 6×8 speakers fit in the Infiniti G37 without modification?
Often, 6×8 speakers will fit the G37 door openings but fitment depends on mounting depth and bolt pattern. Check the speaker's mounting depth against the clearance behind the door panel and compare the mounting hole spacing to your vehicle. Some speakers require a simple adapter or spacer, while others may need minor trimming of the door panel or a custom bracket.
Should I choose coaxial or component 6×8 speakers for the G37?
Coaxial 6×8 speakers typically offer easier installation because the tweeter is integrated, which is practical for door mounting. Component 6×8 speaker systems provide better flexibility for tweeter placement and can improve imaging, but they require more installation work and planning. Your choice depends on how much effort you want to invest in installation versus the desired sound staging.
How much power handling do I need for reliable performance?
Aim for speakers with RMS ratings that match or slightly exceed the continuous output of your head unit or amplifier. If you plan to use a factory head unit, moderate RMS and higher sensitivity can produce good results. For use with an external amplifier, prioritize higher RMS ratings and robust construction to handle increased power without distortion.
Will upgrading to aftermarket 6×8 speakers improve bass in the G37?
Upgrading door speakers can tighten and clarify the mid-bass response, but doors have limited low-frequency extension. For deeper bass, a subwoofer is usually necessary. Choose door speakers with controlled excursion and good cone stiffness to reduce distortion and improve the perceived bass quality within the door-mounted frequency range.
Do I need adapters or wiring harnesses for installation?
It depends on the speaker and the G37's factory connectors. Some aftermarket 6×8 speakers come with common connectors or mounting hardware that fits OEM openings, while others require harness adapters or spade terminals. Verify the connector type and include any necessary adapters to avoid cutting factory wiring.
How can I reduce door rattles after installing new speakers?
Use proper mounting hardware and ensure the speaker sits flush against a rigid surface. Adding damping material to the door skin and around the speaker mounting area can reduce vibrations. Tighten mounting screws evenly and avoid over-tightening, which can deform the speaker basket and cause noise.
Final Verdict
When choosing Infiniti G37 6×8 speakers, prioritize physical fit, mounting depth, and power handling to ensure a trouble-free installation and reliable performance. Balance frequency response and materials to match your listening preferences, and consider whether coaxial ease or component flexibility better suits your goals.Tradeoffs often involve installation complexity versus sound staging and power requirements. Focus first on speakers that clearly document fitment and specifications, then match those specs to your head unit or amplifier to achieve the best in-car listening experience.
Explore More:
- Check out all Infiniti G37 parts & accessories
- Explore Electronics
- Browse all Accessories
