Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Ram 2500 and want a modest lift to improve front clearance or correct rake, a 1 inch leveling kit is a common, low-impact option. The right kit can level the truck�s stance, preserve factory ride characteristics, and free up a bit more room for larger tires without major suspension changes.This guide covers our shortlisted top 1 inch leveling kits for the Ram 2500. We focus on fitment, installation considerations, and how each option affects ride quality and handling so you can pick the one that matches your needs. Read on for practical factors and installation notes before the product list.
Looking for other parts? See all Ram 2500 parts & accessories.
Top Picks at a Glance
| Best Overall Leveling Kit The best all-around 1-inch leveling kit balancing features and quality | ReadyLIFT 1" Rear Coil Spring Spacer Kit for Ram 2500 4WD (2019) |  |
| Best Budget Leveling Kit A low-cost 1-inch kit that covers the basics without extras | ECCPP 1" Rear Leveling Lift Kit for Ram 2500 (2014–2022) |  |
| Best Premium Leveling Kit A higher-end 1-inch kit with superior materials and engineering | J2 Engineering 1" Rear Leaf Spring Leveling Blocks with U-Bolts |  |
| Best 1-Inch Leveling Kit A purpose-built kit that reliably achieves a one-inch front lift | SCITOO 1" Rear Leveling Kit for Ram 2500 (2014–2022) |  |
| Best Complete Leveling Kit Includes all necessary hardware and components for full installation | Auto Dynasty Set of 2 Leaf Spring Leveling Lift Blocks Kit, 1" Rear Lift for Dodge Ram 1994-2002 |  |
| Best Heavy-Duty Leveling Kit Built from thicker, reinforced parts for rugged or towing use | YHTAUTO 1 Inch Rear Leveling Lift Kit for Ram 2500 / ProMaster 2500 (Set of 2) |  |
| Best Easy-Install Leveling Kit Designed for fast, DIY-friendly installation with minimal tools | AINTIER 1-inch Rear Leveling Lift Kit for Ram 2500 (2014–2022) | |
1. ReadyLIFT 1" Rear Coil Spring Spacer Kit for Ram 2500 4WD (2019)
Best Overall Leveling Kit
| Automotive Fit Type | Vehicle Specific Fit |
|---|---|
| Material Type | Steel |
| Auto Part Position | Rear |
| Maximum Lifting Height | 1 inches |
This ReadyLIFT rear coil spring spacer kit provides a simple, vehicle-specific 1-inch rear lift for 2019 Ram 2500 4WD trucks. The kit installs onto the factory rear coil springs and uses an internal collar to keep the spacer seated and tight between the chassis and spring, making it a straightforward option for DIY installation. Made from heavy-duty fabricated steel, the spacers are built to withstand towing and hauling loads while restoring a level stance when the truck is carrying weight. Because they are a rear-only solution that mounts to the existing springs, ride quality remains close to factory for everyday driving and loaded conditions, and there is no need to replace springs or shocks. The main limitation is that this kit only provides one inch of rear lift and does not address front ride height or suspension geometry changes, so those wanting a matched front level or larger lift will need additional components. For owners who want a quick, durable way to correct rear sag under load, this kit is a practical choice.
Best for: Ram 2500 owners who want a durable, easy-to-install rear lift to level a truck under load and prioritize a simple bolt-on solution they can fit themselves.
Less Ideal for: Drivers seeking a full front-to-rear leveling solution, larger lifts, or who need adjustments to ride height that affect suspension geometry should consider more comprehensive kits.
- Vehicle-specific fit for 2019 Ram 2500 4WD simplifies installation and fitment accuracy
- Heavy-duty fabricated steel construction designed for towing and hauling loads
- Internal collar design keeps spacers seated and reduces movement after installation
- Easy bolt-on installation suitable for competent DIY mechanics
- Only raises the rear by 1 inch and does not correct front ride height or suspension geometry
Verdict: The best all-around 1-inch leveling kit that balances fitment accuracy, durability, ride quality, and ease of installation for most DIY mechanics.
2. ECCPP 1" Rear Leveling Lift Kit for Ram 2500 (2014–2022)
Best Budget Leveling Kit
| Fitment | Ram 2500 2014-2022 |
|---|---|
| Lift height | 1 inch |
| Material Type | Aluminum (6061-T6) |
| Auto Part Position | Rear |
This ECCPP rear 1" leveling lift kit is a simple bolt-on solution to reduce factory rake and level the rear of Ram 2500 trucks from 2014 through 2022. Made from 6061-T6 aircraft-grade aluminum with anodized finishing and supplied with hardened 10.9 grade bolts, the kit is engineered to be lightweight, corrosion resistant, and strong enough for everyday driving. Installation is straightforward and does not require cutting, strut pre-loading, or modification of factory parts, so a competent DIYer or a basic shop install can complete it quickly using the provided hardware. In use it provides the intended visual correction and extra clearance for slightly larger tires while maintaining original ride and steering characteristics when installed as directed. Limitations are that this is a rear-only 1" spacer kit so it does not change front suspension geometry and the actual lift achieved can vary due to suspension geometry, so expect a slightly different measured height than the spacer thickness.
Best for: Buyers who want the cheapest reliable way to level a Ram 2500 rear end for a cleaner look and a modest tire clearance increase without complex installation.
Less Ideal for: Drivers seeking a full front-to-rear lift, larger lift heights, or those who need heavy-duty off-road suspension upgrades should look at full lift kits or suspension components.
- Constructed from 6061-T6 aircraft-grade aluminum for strength and light weight
- Anodized finish and hardened 10.9 grade bolts improve corrosion resistance and durability
- Bolt-on design with included hardware requires no cutting or strut modification
- Maintains factory ride and steering feel when installed as intended
- Rear-only 1" spacer does not alter front suspension, so overall vehicle stance change is limited
Verdict: The best low-cost 1-inch leveling kit for buyers who prioritize price and simple lift capability while still needing reliable, safe components for straightforward installs.
3. J2 Engineering 1" Rear Leaf Spring Leveling Blocks with U-Bolts
Best Premium Leveling Kit
| Fitment | Dodge Ram 1500 1994-2001; Ram 2500/3500 1994-2002 (2WD, 2.56" rear axle) |
|---|---|
| Maximum Lifting Height | 1 inches |
| Material Type | T6-6061 Aluminum |
| Included Components | Set of 2 lift blocks and 2 U-bolts |
This kit raises the rear of compatible 1994–2002 Ram 2WD trucks by one inch using billet T6-6061 aluminum lift blocks paired with two u-bolts. It is intended as a simple bolt-on solution to correct factory rake, add modest ground clearance, and free up room for slightly larger tires. Installation is straightforward for a shop or experienced DIYer since it replaces the existing block under the leaf spring and secures with the included u-bolts, though no printed instructions are provided and professional installation is recommended. The use of machined aluminum and a powder-coated finish gives it corrosion resistance and lighter weight compared with steel blocks while maintaining strength for street and light-duty use. Limitations are its vehicle-specific fit to 2.56" rear axle 2WD Rams and a modest 1" lift height, so it is not intended for heavy off-road lifting or load-carrying compensation on heavily modified trucks.
Best for: Buyers who want a higher-end, durable 1-inch rear leveling solution for an older Ram 2WD and prioritize upgraded materials and a clean, factory-style installation.
Less Ideal for: Do not choose this if you need larger lifts, heavy-duty load leveling, or if your truck is 4WD or outside the listed model years and axle specification.
- Billet T6-6061 aluminum construction for corrosion resistance and strength
- Includes necessary u-bolts for a complete rear block install
- Simple bolt-on design that corrects rake and adds modest ground clearance
- Powder-coated finish improves durability against the elements
- Limited to a 1-inch lift which is not suitable for major leveling or large tire clearance needs
- Fitment restricted to specific 1994–2002 Ram 2WD axle configurations
Verdict: The best premium 1-inch leveling kit for buyers willing to pay more for upgraded materials, tighter tolerances, and longer-lasting performance under heavier use.
4. SCITOO 1" Rear Leveling Kit for Ram 2500 (2014–2022)
Best 1-Inch Leveling Kit
| Fitment | 2014–2022 Ram 2500 2WD/4WD |
|---|---|
| Maximum Lifting Height | 1 inches |
| Auto Part Position | Rear |
| Material Type | iron |
| Included Components | 1set leveling kit |
This SCITOO 1" rear leveling kit is a vehicle-specific lift block solution for Ram 2500 models from 2014 through 2022 that raises the rear by one inch to reduce factory rake and better match front and rear ride heights. Installation is a simple bolt-on procedure using the included hardware and is intended to be completed without cutting or modifying factory components. The kit is made from iron and sized to provide an accurate one-inch lift at the rear, which gives extra clearance for slightly larger tires and a more balanced stance. Practical benefits include preserved steering and ride feel since the kit only changes ride height rather than suspension geometry, and the parts list includes bolts preinstalled for faster fitment. Limitations are that it is rear-only so front ride height is unaffected, it is not compatible with trucks that have the rear auto-level air suspension, and iron construction adds durability but increases component weight compared with aluminum spacer options.
Best for: Buyers who want a straightforward, reliably sized one-inch rear raise for a 2014–2022 Ram 2500 to level the truck and gain modest tire clearance without changing suspension components.
Less Ideal for: Drivers seeking a full front-and-rear leveling solution, owners with rear air suspension, or those prioritizing the lightest possible spacer materials should consider other options.
- Vehicle-specific fit for 2014–2022 Ram 2500 rear to ensure correct alignment with factory mounts
- Simple bolt-on installation with included hardware and preinstalled bolts
- Provides a precise 1" rear raise to reduce factory rake and allow slightly larger tires
- Durable iron construction suited for heavy-duty truck use
- Not compatible with trucks equipped with rear auto-level air suspension
- Rear-only kit so front height is unchanged unless paired with a front spacer
Verdict: The best 1-inch leveling kit when your priority is an accurate, consistent one-inch front lift with components sized specifically for that rise.
5. Auto Dynasty Set of 2 Leaf Spring Leveling Lift Blocks Kit, 1" Rear Lift for Dodge Ram 1994-2002
Best Complete Leveling Kit
| Vehicle Compatibility | Dodge Ram 1500 1994-2001; 2500/3500 1994-2002 (2WD, 2.56" rear axle) |
|---|---|
| Lift Height | 1 inch |
| Included Components | Set of 2 lift blocks, set of 2 U-bolts, hardware |
| Material | T6 6061 billet aluminum |
This kit provides a ready-to-install 1-inch rear lift for the specified Dodge Ram trucks using a pair of billet T6 6061 aluminum lift blocks and included U-bolts and hardware. It is intended as a straightforward bolt-on solution to reduce factory rake, increase ground clearance, and allow slightly larger tires without complex suspension changes. The T6 6061 billet construction and powdercoated finish offer corrosion resistance and a durable mounting surface compared with inexpensive cast blocks, and the kit uses a 9/16" diameter pin for secure attachment. Installation is typical for leaf-block kits and can be completed by a competent DIYer or a local shop with basic tools since the necessary U-bolts and hardware are supplied. The main limitation is that this is a modest 1-inch lift, so buyers seeking more height or a full suspension overhaul will need different components, and it only fits the listed Dodge Ram rear axle and 2WD configurations rather than multiple vehicle applications.
Best for: Buyers who want a single-purchase, out-of-the-box rear leveling solution for older Dodge Ram trucks and prefer a durable, DIY-installable kit that includes all necessary hardware.
Less Ideal for: Owners seeking larger lifts, full suspension upgrades, or who need fitment for other vehicles or drivetrain configurations should look elsewhere.
- Complete kit includes lift blocks, U-bolts, and hardware for a single purchase install
- T6 6061 billet aluminum blocks resist corrosion and offer higher strength than basic cast alternatives
- Powdercoated finish adds extra protection against wear and the elements
- 9/16" diameter pin provides a secure, robust connection to the leaf spring
- Only provides a 1-inch lift which may be insufficient for buyers wanting larger lift heights
Verdict: The best complete 1-inch leveling kit for buyers who want a full, out-of-the-box solution that includes spacers, hardware, and any required brackets for a single purchase install.
6. YHTAUTO 1 Inch Rear Leveling Lift Kit for Ram 2500 / ProMaster 2500 (Set of 2)
Best Heavy-Duty Leveling Kit
| Vehicle fit | Ram 2500 / ProMaster 2500 2014-2022 |
|---|---|
| Lift height | 1 inch rear |
| Material | Solid steel |
| Included components | Installation guide and mounting hardware |
This YHTAUTO rear leveling kit uses solid steel spring spacers to lift the rear of Ram 2500 and ProMaster 2500 models by roughly 1 inch. It installs as a direct bolt-on solution with the supplied mounting hardware and basic tools, so you can add a small rear lift without swapping springs or shocks. The powder-coated steel construction resists moisture and rust and is designed to withstand heavier loads and rough-road use without bending. In practice the kit creates a bit more room for larger tires and produces a slightly taller driving angle while aiming to preserve factory ride quality and damping. Important limitations are that the lift is modest at one inch, the actual vehicle lift may differ due to suspension leverage, and this set is only rear spacers so front-end leveling or full suspension upgrades are not addressed. Expect straightforward installation but plan for a post-install check of alignment and load-specific performance when carrying heavy payloads frequently.
Best for: Buyers who prioritize reinforced, load-capable rear leveling for Ram 2500 or ProMaster 2500 and want a simple bolt-on spacer to increase clearance and tire room without a full suspension overhaul.
Less Ideal for: Drivers seeking larger lifts, full suspension upgrades, or complete front-to-rear height correction should look at multi-component kits or heavy-duty suspension systems instead.
- Solid steel spacers for enhanced strength under load
- Powder-coated finish improves corrosion resistance for durability
- Direct bolt-on design with included mounting hardware simplifies installation
- Maintains near-factory ride damping while adding rear clearance
- Only provides a modest 1 inch rear lift and does not address front ride height or shocks
Verdict: The best heavy-duty 1-inch leveling kit for users who need stronger components and reinforced designs to handle heavier loads, frequent off-road use, or more demanding conditions.
7. AINTIER 1-inch Rear Leveling Lift Kit for Ram 2500 (2014–2022)
Best Easy-Install Leveling Kit
| Fitment | 2014–2022 Ram 2500 (2WD and 4WD) |
|---|---|
| Lift height | 1 inch rear |
| Material | 6061-T6 aluminum |
| Mount type | Top-of-strut bolt-on spacer |
| Bolts grade | 10.9–12.9 |
This 1-inch rear leveling kit is designed specifically for 2014–2022 Ram 2500 trucks and uses CNC-machined 6061-T6 aluminum spacers that mount on top of the strut to add ride height. Installation is bolt-on: you fit the spacer to the strut, secure it with the supplied high-strength bolts, and avoid coil removal or extensive disassembly. The aluminum construction and powder-coated finish aim to resist corrosion and keep the spacer looking factory-quality over time. Practical benefits include restoring a level stance when running heavier loads or larger tires in the front, and the simple installation reduces shop time and tools required for a DIY mechanic. Important limitations are that this product only provides a 1-inch rear lift and the actual ride height change depends on the vehicle's current suspension; it does not replace springs or shock components so load-carrying or ride-quality changes are modest. Fitment is limited to Ram 2500 2014–2022 models and both 2WD and 4WD are listed as compatible.
Best for: DIY mechanics who want a quick, mostly bolt-on solution to correct rear rake on a 2014–2022 Ram 2500 and prioritize a straightforward installation process over major suspension upgrades.
Less Ideal for: Drivers seeking significant lift, comprehensive suspension upgrades, or improved load-carrying performance should consider full spring or shock replacements instead.
- Bolt-on spacer design enables installation without removing coil assemblies or cutting/drilling
- CNC-machined 6061-T6 aluminum construction for strength and corrosion resistance
- Powder-coated finish improves durability and appearance
- Includes high-strength grade 10.9–12.9 bolts for secure attachment
- Only provides a 1-inch rear lift and will not address front ride height or heavy-duty load support
Verdict: The best easy-install 1-inch leveling kit for DIY mechanics who want a straightforward, time-saving installation process with clear instructions and minimal specialized tools.
Choosing the Right Ram 2500 1 Inch Leveling Kit: Key Factors to Consider
Fitment and Model-Year Specifics
Correct fitment is vital because steering geometry and mounting points can change between model years and trim configurations. Confirming that a kit is specified for the Ram 2500 avoids surprises during installation and reduces the chance of interference with brake lines, sensors, or sway bar links.
A good-fit kit will list the exact year range and any necessary sub-model notes. If your truck has factory options such as adaptive dampers or air suspension components, verify compatibility up front. Misfit components can cause binding, uneven tire wear, or require additional brackets or hardware that add time and expense.
Ride Quality and Handling Tradeoffs
A modest 1 inch lift can change front-end geometry and alter steering feel if not engineered to retain original geometry. Consider whether the kit uses tapered spacers, strut extensions, or new upper mounts; each approach affects control-arm angles and shock travel differently.
Kits that maintain factory mounting points and use precision-machined spacers tend to preserve ride comfort better. Conversely, heavy-handed designs or poor-quality materials can introduce noise or a harsher ride. Think about how you use the truck daily and whether you want to prioritize comfort or a firmer, utility-focused setup.
Materials and Corrosion Resistance
Materials affect longevity, especially in climates that expose components to road salt or moisture. Steel components should have robust coatings such as powder coat or zinc plating, while aluminum or billet parts should be anodized to resist corrosion.
Inspect fastener quality and whether the kit includes grade-rated hardware. Cheap bolts or inadequate surface protection can lead to seized parts or premature failure. Durable materials also help maintain consistent fitment over time and reduce the need for re-torquing after seasonal use.
Installation Complexity and Required Tools
Some 1 inch leveling kits are simple spacer-and-bolt installs that a competent DIYer can complete in a few hours with basic tools. Others require partial disassembly of the strut or spring and specialized tools like spring compressors or torque wrenches with higher capacity.
Consider whether installation instructions are clear and whether the kit provides all necessary hardware. Factor in the need for a wheel alignment after installation. If you do not have a lift or proper tools, plan for a professional install to ensure safety and correct torque values.
Impact on Warranty, Sensors, and Safety Systems
Even a modest lift can shift sensor positions or change how advanced driver assistance systems operate. Verify that components like wheel speed sensors, parking sensors, and ABS harnesses will not be strained by the new ride height.
While a 1 inch kit is unobtrusive compared with larger lifts, improper installation or incompatible kits could void parts of a warranty or necessitate recalibration. Check manufacturer guidance for any implications and keep documentation of the kit and install in case inspection is required.
Future Upgrades and Tire Clearance
One reason owners choose a 1 inch kit is to provide just enough room for slightly larger tires while maintaining stock handling. Think about whether you might add larger tires later because some kits will limit maximum tire size or require additional trimming or rubbing solutions.
Select a kit that balances current needs with possible future changes so you do not have to replace components later. Confirm recommended maximum tire diameters and wheel offset ranges to avoid fitment surprises after upgrading wheels or tires.
Why Choose a 1 Inch Leveling Kit for Your Ram 2500
A 1 inch kit addresses modest front-to-rear rake and provides incremental clearance without the handling compromises of larger lifts. For Ram 2500 owners who want a cleaner stance or a bit more room for slightly taller tires, this size is a practical middle ground.
Because the lift is small, many kits can be installed without replacing control arms or shocks. That reduces complexity while still delivering visible alignment of the truck�s profile.
- Subtle stance correction with minimal impact on factory geometry
- Often compatible with factory shocks and steering linkages
- Useful for fitting slightly larger tires while maintaining ride comfort
Installation Tips and Alignment Considerations
Even for simple spacer-style kits, follow the manufacturer torque sequence and specifications. Always re-torque fasteners after a short break-in period and get a professional wheel alignment to restore toe and camber to factory specs.
If the kit requires compressing coil springs or disassembling struts, use a suitable spring compressor and work on one side at a time. Keep track of hardware and replace any worn or stretched bolts with grade-rated replacements when specified.
- Plan for a post-install wheel alignment
- Inspect sway bar links and brake line routing during installation
- Retorque after 100 to 200 miles to ensure fasteners settle correctly
Common Compatibility Questions for Ram 2500 Owners
Verify whether your truck has factory options such as load leveling or electronic damping that might affect compatibility. Some kits are explicitly designed to work only with standard coil and shock setups, while others include adaptors or spacers to accommodate optional hardware.
Match wheel offset and tire diameter to the kit recommendations to prevent rubbing. If you plan to add accessories such as bumper-mounted winches or heavy-duty bumpers, consider how the slight height change affects approach angles.
- Confirm compatibility with factory electronic features
- Check tire and wheel specifications against kit limits
- Consider accessory fitment after leveling is complete
Maintenance and Long-Term Care
After installation, periodically inspect mounting points, fasteners, and spacer surfaces for corrosion or loosening. Routine checks during oil changes or seasonal inspections can catch issues early.
If the kit uses polyurethane components, lubricate per the manufacturer recommendations. For metal parts, touch up any chipped coatings to prevent rust from forming and spreading.
- Inspect hardware and coatings regularly
- Follow any lubrication intervals for non-metallic components
- Address corrosion spots promptly to preserve fitment and safety
How a 1 Inch Kit Interacts With Tire Choices
A small lift is primarily intended to provide clearance for slightly taller or wider tires without changing gearing or load capacity. Choosing a tire that stays within the kit�s recommended maximum diameter helps maintain handling and prevents fender rub.
If you plan to use more aggressive tire sizes later, budget for proper wheel offsets and consider whether additional lift or trimming will be required.
- Stay within recommended tire diameters to avoid rubbing
- Consider wheel offset adjustments before changing tire size
- Small lifts are best matched with modest tire upgrades
Still looking for the perfect fit?
Select your Ram 2500 configuration to see the most relevant Leveling Kits recommendations
How We Chose the Best Ram 2500 1 Inch Leveling Kit
We prioritized candidates that provide a true 1 inch front lift while preserving the Ram 2500�s factory suspension geometry and ride characteristics. Key evaluation criteria included fitment accuracy to model-year variations, construction quality and corrosion resistance, hardware completeness, and whether the kit required additional alignment or suspension modifications after installation.We also assessed installation complexity and whether the design uses OEM-style mounting points versus aftermarket relocation brackets. Ride quality and durability considerations were inferred from material specs and design (for example, whether components are billet, steel, or polyurethane). Noise, vibration, and harshness potential was a factor for owners who prioritize daily drivability.Excluded items included kits that provide less than 1 inch of lift, multi-inch lift conversions, or products that require major suspension overhauls. We filtered out options lacking clear fitment information for the Ram 2500 or those without necessary hardware to complete a safe installation.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a 1 inch leveling kit affect my truck�s warranty?
A 1 inch kit is small and often does not trigger warranty issues on its own, but effects can depend on the specific warranty terms. If a failure occurs that can be traced to the aftermarket component or its installation, the related repair may not be covered.
Do I need an alignment after installing a 1 inch leveling kit?
Yes, you should get a wheel alignment after installation. Even modest changes in ride height can alter toe and camber enough to cause uneven tire wear or handling changes, so an alignment restores factory geometry.
Can I install a 1 inch kit myself?
Many kits are designed for DIY installation with basic tools, but some require spring compression or partial strut disassembly. If you do not have proper tools or experience, a professional install is safer and ensures correct torque values.
Will a 1 inch kit let me run much larger tires?
A 1 inch lift typically allows only modest increases in tire diameter. For significantly larger tires you may need a taller lift, different wheel offsets, or trimming to avoid rubbing.
Are spacer-style kits less durable than full replacement components?
Spacer-style kits can be durable if made from quality materials and properly coated, but they rely on existing suspension components. Full replacement components may offer different longevity characteristics, though they are more invasive to install.
How does a 1 inch leveling kit affect towing or load capacity?
A minor front lift usually has negligible impact on towing and payload capacity, but any suspension modification can change load distribution slightly. For heavy towing use, verify that suspension changes do not conflict with the truck�s load-carrying specifications.
Final Verdict
For most Ram 2500 owners seeking a subtle stance correction or a small clearance increase, a 1 inch leveling kit offers a practical balance between appearance and drivability. Prioritize kits with verified fitment for your model year, durable materials, and designs that preserve factory geometry to maintain predictable handling.Factor in installation complexity and plan for a post-install alignment. If you keep those tradeoffs in mind, you can confidently select a 1 inch kit that achieves the stance and clearance you want without compromising daily comfort or safety.
Explore More:
- Check out all Ram 2500 parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
