Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a 2007-2013 GMC Sierra 1500 you know the center console takes a lot of daily abuse from gear, drinks, and keys. A properly fitting console cover protects the armrest surface from tears, fades, and stains while adding padding where you rest your arm on long drives. This guide focuses on console covers and armrest protection made for the Sierra 1500 from 2007 through 2013, and it presents our top shortlisted options that balance fit, durability, and ease of cleaning. Below you will find the key performance criteria we used to evaluate each cover, plus practical advice for installation, material tradeoffs, and maintenance. Use the quick sections to match a cover to how you use your truck, then check the product blocks for the specific picks we shortlisted.
Looking for other parts? See all GMC Sierra 1500 parts & accessories.
Top Picks at a Glance
| Best Overall Console Cover The all-around top pick balancing fit, materials, and features | LCWRGS Center Console Lid Replacement for 2007–2014 Chevy/GMC Full Floor Consoles |  |
| Best Premium Console Cover Higher-end materials and finish for buyers willing to spend more | BDFHYK Center Console Lid Armrest Cover for 2007–2014 Chevrolet/GMC Trucks |  |
| Best Leather Console Cover Genuine or high-quality faux leather for a refined interior look | Muslogy Center Console Armrest Cover for 2007-2013 Chevy Silverado/GMC Sierra (Jump Seat Only) |  |
| Best Heavy-Duty Console Cover Reinforced construction and rugged fabrics for maximum durability | VeCarTech Center Console Lid Kit with Latch (Black) |  |
| Best Compact Console Cover Slim, low-profile covers that preserve console clearance and space | KBH Center Console Armrest Cover for 2007-2014 Chevy Silverado & GMC Sierra, Vinyl Leather |  |
| Best Complete Console Cover Covers that include armrest, lid, and adjacent pocket protection | UMISHI Center Console Lid Replacement Kit (fits 2007–2014 GM trucks) |  |
1. LCWRGS Center Console Lid Replacement for 2007–2014 Chevy/GMC Full Floor Consoles
Best Overall Console Cover
| Compatible years/models | 2007–2014 Chevy; 2007–2013 GMC (full floor consoles only) |
|---|---|
| Includes | Lid, front push button, tray assembly |
| Material | Leather-like, waterproof surface |
| OEM part numbers replaced | 15217111, 15941534, 19328718 |
This LCWRGS center console lid is a direct replacement assembly intended for trucks with the full center floor console. It replaces the lid, latch, and inner tray so you get a ready-to-install unit rather than just a cover. The surface uses a factory-style grain and leather-like material that resists wear and wipes clean, while the soft padded top restores arm comfort on long drives. Installation is straightforward for a DIYer: reuse the factory mounting points and screws with minimal tools, though a few users report the screw bosses need a bit of persuasion to start. The lid includes the front push button and tray assembly so small items stay tidy. Expect near-factory looks and function at a fraction of dealer cost, but the screw receptacles are not as robust as OEM and may require careful tightening. Overall this is a practical, cost-effective replacement for worn or damaged console lids on compatible GMC Sierra trucks.
Best for: Buyers who need a near-factory replacement that restores comfort and storage without paying dealer prices and who are comfortable doing a straightforward DIY swap.
Less Ideal for: Shoppers who want an exact OEM part with factory-grade mounting hardware or who prefer professional installation for guaranteed fitment.
- Full replacement assembly includes lid, latch, and tray for simple installation
- Factory-style grain and leather-like material for a close visual match
- Padded top improves arm comfort on long drives
- Waterproof surface that wipes clean for easier maintenance
- Screw mounting pillars can be slightly misaligned or less robust than factory parts
Verdict: The best all-around console cover that balances durable materials, accurate fit, useful features, and reasonable price for most buyers.
2. BDFHYK Center Console Lid Armrest Cover for 2007–2014 Chevrolet/GMC Trucks
Best Premium Console Cover
| Applicable brands | Chevrolet, GMC |
|---|---|
| Material | PU and ABS plastic |
| Compatible part numbers | 15217111, 15941534, 19328718, 924-875 |
| Exterior | Textured |
This BDFHYK center console lid replaces the factory armrest cover on compatible Chevrolet and GMC trucks and aims to deliver a refreshed, more comfortable surface. It pairs a rigid ABS/PU base with a microfiber leather pad that provides a soft, padded feel for your elbow and a smooth surface that is easy to wipe clean. Installation is generally straightforward for homeowners with basic tools but some buyers report the hinge holes are not threaded and that smaller or different screws may be required. The lid includes cut and fit references for part numbers used on Silverado and Sierra consoles so it can drop in for many model years in the 2007–2014 range when the OE number matches. The textured exterior and stitched leather pad lift the cabin look compared with a worn original, and the materials promise better tear resistance than thin vinyl. Limitations: fit is not universal across every trim or crew cab variation, and mounting hardware may need to be sourced separately during installation.
Best for: Buyers who want a visibly upgraded, longer-lasting armrest surface and are willing to prioritize material quality and finish over saving on cost.
Less Ideal for: If you need a guaranteed bolt‑in replacement for every trim or a kit that includes exact original hardware, this may not be the best choice.
- Microfiber leather pad offers a noticeably softer, more premium feel than stock vinyl.
- Rigid PU and ABS base provides structural support and a factory-style appearance.
- Surface is easy to clean and maintains a neat look that upgrades the interior.
- Listed compatible part numbers make it easier to verify fit for many 2007–2014 Chevy and GMC consoles.
- Mounting holes are not threaded and the original screws may not fit, so replacement hardware is often required.
Verdict: The best premium console cover for customers who prioritize upscale materials, refined fit, and long-term durability over cost.
3. Muslogy Center Console Armrest Cover for 2007-2013 Chevy Silverado/GMC Sierra (Jump Seat Only)
Best Leather Console Cover
| Fitment | 2007–2013 Chevy Silverado/GMC Sierra jump-seat lid |
|---|---|
| Material | Vegan leather with cotton padding |
| Thickness | About 1.5 inches extra padding |
| Installation | Elastic straps, no tools required |
This Muslogy armrest cover slips over the center console jump-seat lid to add about an inch and a half of padding and a vegan leather surface that cleans easily. It is made from stitched vegan leather with an inner cotton layer, so it feels softer than many stock armrests and hides scuffs, pet paws, and sticky fingers. Installation is tool-free: the cover secures with elastic straps and is intended specifically for the jump-seat style lid used in 2007–2013 Silverado and Sierra models. In real-world use it noticeably improves comfort on longer drives and gives the cabin a neater, more premium look. Expect some visible fold creases from packaging at first and occasional forward shifting under hard pressure; several owners noted that the elastic straps keep it in place most of the time but heavier movement can make it slide. The cover does not fit bucket-seat consoles and is designed only for the jump-seat lid configuration.
Best for: Buyers who want a refined, easy-to-clean upgrade that improves comfort and protects the factory center console jump-seat lid on a 2007–2013 Sierra.
Less Ideal for: Drivers with bucket-seat center consoles or those who need a wraparound cover that secures under the lid should look for a different style.
- Made from thick padded vegan leather for a premium look and easy cleaning
- Designed from 3D scan data for a snug fit on 2007–2013 Silverado/Sierra jump-seat consoles
- Adds noticeable cushioning for improved elbow comfort on long drives
- Simple, tool-free installation with elastic straps
- Only fits the jump-seat style center console lid and will not fit bucket-seat consoles
- May arrive with fold creases from packaging that take time to relax
- Can shift forward under heavy pressure or when pets jump
Verdict: The best leather console cover for shoppers who want a refined, easy-to-clean surface and a premium appearance in the cabin.
4. VeCarTech Center Console Lid Kit with Latch (Black)
Best Heavy-Duty Console Cover
| Fits models | 2007–2013 GMC Sierra 1500 (front split bench) |
|---|---|
| Includes | Lid assembly and latch (screws not included) |
| Manufacturer | VeCarTech |
| Item model number | VE-002-Black |
This VeCarTech replacement console lid is a full armrest assembly that swaps into the front split bench seat console on 2007–2013 GMC Sierra 1500 trucks. It includes the lid and a separate latch piece that you install during the swap; original screws are reused so no special hardware is required. In daily use it restores a solid closing action and a like-new appearance for worn or damaged factory lids. Reviewers report straightforward installation, a close match to the factory cut and texture, and a secure latch that stays shut under normal use. The kit does not include screws and the latch ships detached to save transport space, so you will need to retain or reuse existing fasteners and spend a few minutes fitting the latch. Build quality is consistent with aftermarket replacements rather than premium OEM materials, so expect good function and appearance without upgrading to heavier-duty upholstery or reinforced interiors.
Best for: Truck owners wanting a straightforward, factory-style replacement to restore a worn or broken console lid on a 2007–2013 GMC Sierra 1500 with a front split bench seat and who prioritize fit and reliable latching over premium heavy-duty upholstery.
Less Ideal for: If you need a heavy-duty, abrasion- and spill-resistant upholstery upgrade designed for extreme commercial use, consider products specifically marketed as reinforced or marine-grade covers instead.
- Complete lid assembly including latch for direct replacement on split bench consoles
- Designed to match factory cut and texture for a near-original appearance
- Easy, no-modification installation using original mounting points
- Restores secure closing and latching function for worn or damaged lids
- Aftermarket materials are not heavier-duty upholstery and may show wear faster than upgraded heavy-duty covers
Verdict: The best heavy-duty console cover for users who need tough, abrasion- and spill-resistant materials that stand up to heavy use.
5. KBH Center Console Armrest Cover for 2007-2014 Chevy Silverado & GMC Sierra, Vinyl Leather
Best Compact Console Cover
| Fit Type | Custom Fit |
|---|---|
| Material Type | Vinyl |
| Has Seat Belt Accessibility | Yes |
| Automotive Fit Type | Vehicle Specific Fit |
This KBH center console armrest cover slips over the factory lid to protect it from scratches and add a modest layer of cushioning. Designed as a vehicle-specific fit for 2007–2014 Chevy/GMC bucket-seat consoles, it uses vinyl leather over a sponge core and secures with elastic bands so it stays put without tools. The cover is water resistant and resists pet claws, keys, and daily wear while keeping access to the console latch and seat belt unobstructed. Its 0.39" thickness gives a low-profile boost in comfort without significantly raising your elbow height, which is ideal when you need to preserve clearance around shifters or arm movements. Because the surface is vinyl the feel is more synthetic than genuine leather and very heavy, prolonged sun exposure may accelerate wear, so expect typical lifespan of an aftermarket vinyl cover rather than long-term upholstery. Fit is precise when matched to the listed models, but double-check your console style before buying.
Best for: Buyers who want a slim, low-profile console cover that preserves clearance and restores comfort on a 2007–2013 GMC Sierra bucket-seat center console while protecting the lid from scratches.
Less Ideal for: Drivers seeking a premium leather replacement or a heavy-duty long-term upholstery solution should consider higher-end materials or a professional reupholstery instead.
- Vehicle-specific custom fit for 2007–2014 GM bucket-seat center consoles
- Low-profile 0.39" sponge padding increases comfort without adding bulk
- Water-resistant vinyl surface protects against sweat and spills
- Elastic band attachments make installation tool-free and keep the cover secure
- Vinyl material has a synthetic feel and may not age as well as higher-end upholstery
Verdict: The best compact console cover for buyers who prefer a slim, low-profile fit that preserves clearance and doesn’t add bulk.
6. UMISHI Center Console Lid Replacement Kit (fits 2007–2014 GM trucks)
Best Complete Console Cover
| Fits | 2007–2014 GM trucks and SUVs (listed models) |
|---|---|
| Material | PU leather + ABS plastic |
| Includes | Lid assembly with top padded lid and bottom cover |
| Replaces part numbers | 20864154, 20864151, 20864153, 924835 |
This UMISHI center console lid kit replaces the factory lid, providing a padded top, bottom cover, and inner mounting piece as a coordinated assembly. It is used as a direct swap for worn or broken console lids on compatible 2007–2014 GM trucks and large SUVs and includes built-in foam for a softer, higher armrest. The kit is made from PU leather over a plastic base with foam padding to reduce noise and improve elbow comfort, and it is designed to accept the factory latch and mounting hardware so installation is a straightforward screw swap. Practical benefits include a refreshed interior appearance, quieter operation thanks to the snug fit, and a softer resting surface than many original covers. Limitations to keep in mind are that the surface material is synthetic and some users report it can tear if stressed, and matching exact factory grain or color may vary slightly between vehicles.
Best for: Shoppers who want a single, coordinated replacement that restores the entire console lid and armrest area in one step and prioritize a quick install and improved comfort.
Less Ideal for: Buyers seeking exact factory-material originals or those who need a heavy-duty, upholstery-grade surface for extreme daily abuse should look at other options.
- Direct replacement for listed GM part numbers for a near-factory fit
- Padded top with built-in foam reduces elbow pressure and cabin noise
- Coordinated lid and mounting pieces included so you replace the whole assembly at once
- PU leather surface is stain-resistant and easier to clean than cloth
- Synthetic PU cover can be prone to tearing under heavy wear
- Color and grain may not be a perfect match to every factory interior
Verdict: The best complete console cover for shoppers who want full coverage—lid, armrest, and surrounding panels—in a single, coordinated piece.
Choosing the Right 2007-2013 GMC Sierra 1500 Console Cover: Key Factors to Consider
Fit and Compatibility
A cover that fits the Sierra 1500 console precisely matters because gaps and loose edges trap dust and reduce protection. An accurately shaped cover preserves access to storage compartments, latches, and cupholders while maintaining a clean factory appearance. Consider whether the cover is labeled specifically for the 2007-2013 Sierra 1500 console shape and armrest height. Fit also affects retention: tailored covers tend to stay in place while driving, while overly large or universal designs can shift and require frequent adjustment.
If you plan to remove the cover periodically, check how it fastens and whether removal is quick and nondestructive. Poorly fitting covers may cause wear on the console surface from rubbing, so a correct fit reduces the risk of causing the very damage you want to prevent.
Material and Durability
Material choice determines how well the cover resists abrasion, UV fading, and punctures from keys or tools. Common options include synthetic leather, heavy-duty nylon, neoprene, and reinforced fabric. Synthetic leather provides a dressier look but can crack over time if it lacks UV-resistant treatment. Nylon and neoprene offer strong tear resistance and are more forgiving of rough use.
Inspect stitch quality and edge binding because weak seams are a leading point of failure. Reinforced stitching at stress points extends life in high-contact zones. Also consider backing materials and any foam or padding inside the cover; high-density foam maintains shape better and resists compression from repeated use.
Water Resistance and Cleanability
Trucks often see wet or dirty gear, so a cover that resists liquids helps protect the console from stains and moisture damage. Waterproof coatings or closed-weave fabrics prevent liquids from seeping through to the original armrest. Even water-resistant surfaces vary in how they react to oils, grease, and sun-exposed stains.
Cleanability goes hand-in-hand with water resistance. Look for covers that wipe clean with a damp cloth or tolerate mild soap without losing color or texture. Covers with removable tops or machine-washable layers simplify deep cleaning. If you frequently carry food or work gear in the cab, prioritize materials that repel stains and are quick to dry.
Padding and Comfort
The armrest is one of the most-contacted surfaces while driving, so padding affects long-ride comfort and wrist support. Some covers add a thin layer of foam for a subtle cushion, while others include thicker padding for softer support. Thicker padding can improve comfort but may change armrest height and reach, so ensure the added thickness does not interfere with shifting, controls, or ergonomics.
Also consider how the padding holds up over time. Low-quality foam compresses and loses support, whereas denser padding maintains shape. Breathability is another factor; non-breathable layers can trap heat and feel sticky on long summer drives.
Retention and Installation
How a cover attaches determines whether it will stay put through daily use. Common retention methods include elastic hems, hook-and-loop straps, snap fasteners, and integrated straps that tuck under the console. For the Sierra 1500, you want a solution that secures the cover without blocking access to storage or requiring permanent modification.
Installation should be straightforward and reversible. Evaluate whether the cover needs trimming, whether fasteners are corrosion-resistant, and if installation requires tools. Covers that offer clear installation instructions and straightforward fastening methods result in fewer fit issues and less risk of scratching the factory surfaces.
Aesthetics and Interior Integration
While protection is primary, the cover should complement the Sierra 1500 interior. Choose a color and texture that match or tastefully contrast factory materials. A well-integrated cover looks factory-installed rather than an add-on and helps maintain vehicle resale appeal.
Consider visible seam work and whether logos or decorative stitching are tasteful and low-profile. Subtle design choices, such as piping that follows the console lines, improve the finished appearance. Also think about how the cover affects interior lighting and whether it creates glare from sunlight that could be distracting while driving.
Why a Sierra-Specific Console Cover Matters
Console covers designed for the 2007-2013 Sierra 1500 account for the unique armrest shape, storage access, and latch locations found in this generation. A vehicle-specific cut ensures secure retention, preserves full use of the console, and reduces the risk of abrasion where the cover rubs against trim.
Universal or generic covers can work in a pinch, but they often require trimming or constant adjustment. When the cover follows the factory contours, it looks and functions more like an integrated component instead of an obstructive add-on.
- Maintains access to latches and compartment openings
- Reduces gaps where dirt and debris accumulate
- Provides a more stable fit that resists shifting during use
Materials Explained: Pros and Cons
Understanding material differences helps match a cover to how you use your truck. Synthetic leather offers a premium look but needs UV-stable finishes to avoid cracking. Neoprene and heavy-duty nylon stand up better to abrasion and are easier to clean after muddy or greasy tasks.
For waterproof performance, look for sealed seams or laminated backings. Breathable fabrics reduce heat buildup during summer, but fully waterproof laminates may trap heat. Choose based on whether you prioritize water protection or breathability.
- Synthetic leather: attractive, may require UV protection
- Nylon/neoprene: durable, easy to clean
- Laminated waterproof: best for spill protection but less breathable
Installation Tips for a Secure Fit
Prepare the factory console by cleaning and drying the surface to remove grit that could cause abrasion under the cover. Follow the manufacturer instructions for fastening, but in general begin by aligning the front edge, then work the rear and sides into place. Tuck straps under the console where indicated and avoid over-tightening fasteners that could warp the armrest.
If trimming is necessary for a slightly better fit, mark cut lines with a removable marker and trim conservatively. Test fit before finalizing any permanent changes. Periodically check fasteners for loosening, especially after heavy use or seasonal temperature shifts.
- Clean the console surface before installing
- Align front edge first, then secure sides
- Trim carefully only if absolutely needed
Maintaining Your Console Cover
Regular maintenance extends the life of the cover and the underlying console. Wipe spills promptly with a damp cloth and a mild detergent when necessary. For synthetic leather, avoid harsh solvents that strip protective coatings; for fabrics, vacuum seams to remove trapped dirt that accelerates wear.
If the cover is removable, schedule deeper cleaning sessions monthly or as needed based on use. Allow any washed covers to dry completely before reinstalling to prevent mildew and odor buildup.
- Wipe spills quickly to prevent staining
- Vacuum seams and crevices regularly
- Air dry removable covers completely before reinstalling
Matching Cover Features to How You Use the Truck
Think about typical cabin activity when selecting features. If you carry tools, work gloves, or loose hardware often, prioritize abrasion resistance and reinforced stitching. For drivers who transport children or frequent food and drink, waterproof or highly cleanable surfaces reduce staining and odor issues.
If you spend long hours on the road, thicker padding and softer cover textures improve comfort. Conversely, if you want a low-profile look that preserves original ergonomics, choose a thinner cover with a snug fit that does not alter armrest height significantly.
- Work trucks: prioritize abrasion resistance and secure retention
- Family or food transport: prioritize water resistance and cleanability
- Long-distance drivers: prioritize padding and comfort
Common Mistakes to Avoid
Avoid assuming all universal covers will fit the Sierra 1500 without modification. Ill-fitting covers can obstruct latches or leave edges exposed to dirt. Do not over-pad the armrest without checking ergonomics because excessive height can change reach and control feel.
Do not neglect ventilation and drying. Trapping moisture under a non-breathable cover can promote mildew or speed deterioration of factory materials. Finally, avoid covers that require permanent alterations to the console unless you are prepared to accept those changes.
- Do not rely on one-size-fits-all covers without testing fit
- Avoid excessive padding that changes ergonomics
- Do not trap moisture under non-breathable materials
How We Chose the Best 2007-2013 GMC Sierra 1500 Console Cover
We prioritized covers that deliver a secure, vehicle-specific fit for the 2007-2013 GMC Sierra 1500, resisting movement during normal use while preserving access to latches and cupholders. Fit accuracy was a primary filter because a loose or ill-fitting cover creates gaps that collect dirt and reduce protection. Material durability was evaluated with an emphasis on abrasion resistance, UV stability, and stitch quality. We looked for fabrics or leathers that withstand repeated contact from keys, tools, and clothing without tearing or excessive wear. Ease of cleaning was another core criterion, favoring surfaces that shed liquids or can be wiped clean without special care. Comfort and padding were measured by how much cushion a cover adds to the armrest and whether that padding maintains shape over time. Installation and retention methods were considered next, including how tightly covers attach and whether they require trimming or permanent alterations. We also screened for features that match real-world truck use: waterproofing or water resistance to protect against spills, low-bulk designs that do not impede arm movement, and design choices that do not block storage compartments. Exclusions included generic, one-size-fits-all covers that need extensive modification to fit and products lacking clear material specifications or fastening methods.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a universal console cover fit my 2007-2013 Sierra 1500?
A universal cover may fit loosely but often needs trimming or additional fastening to stay secure. For the best fit and to preserve access to latches and compartments, a Sierra-specific cover is usually a better choice.
Can I clean a synthetic leather console cover with regular household cleaners?
Many synthetic leather covers tolerate mild soap and water, but harsh solvents can damage coatings. Test a small inconspicuous area first and follow the manufacturer care instructions for best results.
Will adding padding change the armrest height or ergonomics?
Yes, thicker padding can raise the armrest and slightly alter your reach to controls. Choose a padding thickness that balances comfort with maintaining comfortable hand and arm positioning while driving.
How do I prevent mold or mildew under a non-breathable cover?
Allow the console and cover to fully dry after cleaning before reinstalling. Periodically remove the cover to air out the console and avoid long-term moisture exposure to prevent mildew.
Are there installation steps to avoid scratching the factory console?
Clean the console surface before installing to remove grit, and avoid using sharp tools during trimming. Work gently when tucking straps and use protective cloths if needed to prevent incidental scratches.
How often should I replace a console cover?
Replacement depends on use and material quality but often ranges from a few years for low-cost fabrics to many years for high-quality synthetic leather or reinforced materials. Replace the cover when padding compresses, seams fail, or visible wear compromises protection.
Final Verdict
When choosing a console cover for the 2007-2013 GMC Sierra 1500, prioritize a precise fit, durable materials, and a fastening method that stays secure without blocking access to compartments. Balance padding for comfort against changes in armrest height and choose water-resistant surfaces if you regularly face spills or wet gear. Your ideal pick depends on how you use the truck: favor abrasion-resistant, reinforced materials for heavy-duty work and waterproof, easy-clean surfaces for family or food transport. Focus first on fit and material durability, and you will protect the factory console while improving daily comfort and functionality.
Explore More:
- Check out all GMC Sierra 1500 parts & accessories
- Explore Interior Accessories
- Browse all Accessories
