Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading to a black exhaust tip is one of the quickest ways to change the rear-end appearance of your GMC Sierra 1500 while protecting the tailpipe from corrosion and road debris. The right black tip should match your truck s exhaust diameter, resist rust and fading, and install cleanly without interfering with ground clearance or the bumper cutout. This guide shortlists the top black exhaust tips available for the Sierra 1500 and explains the practical tradeoffs to consider. Below you will find our top picks for black exhaust tips and a clear explanation of the criteria we used to evaluate fitment, finish, and ease of installation.
Looking for other parts? See all GMC Sierra 1500 parts & accessories.
Top Picks at a Glance
| Best Overall Exhaust Tip Our top pick balancing fit, finish, and long-term durability | FITIPICI Pair Gloss Black Exhaust Tip Bezels for Silverado/Sierra 1500 (2019–2023) |  |
| Best Budget Exhaust Tip An inexpensive black tip that upgrades appearance without breaking the bank | Richeer 3" Inlet x 5" Outlet Stainless Steel Exhaust Tip, 12" Long, Black Powder Coat |  |
| Best Direct-Fit OEM Exhaust Tip Replacement bezels made to match OEM part numbers and bumper cutouts | FEXON 2-Pack Exhaust Tip Bezels for Silverado/Sierra 2019–2024, Black |  |
| Best Bolt-On Universal Exhaust Tip Universal black tips with clamp or bolt-on mount for quick installs | AUTOSAVER88 2.75" Inlet x 3.5" Outlet 12" Stainless Steel Bolt-On Exhaust Tip, Black Powder Coat |  |
| Best Black‑Chrome Coated Exhaust Tip Black-chrome or powder-coated finishes that resist fading and corrosion | shitoubaihuo Dual Black Chrome Exhaust Tip for GMC Sierra 1500 (2020–2026) |  |
| Best Weld‑On Heavy‑Duty Exhaust Tip Thicker stainless or welded tips built for permanent, heavy-duty installs | TMOFMS Weld-On Stainless Steel Exhaust Tip, 2.5" Inlet x 4" Outlet, 18" Length, Black (2-Pack) |  |
1. FITIPICI Pair Gloss Black Exhaust Tip Bezels for Silverado/Sierra 1500 (2019–2023)
Best Overall Exhaust Tip
| Compatible models | Chevy Silverado / GMC Sierra 1500 2019-2023 |
|---|---|
| Part number | 2253506 (L:84434641, R:84434642) |
| Exterior | Brushed / Gloss Black |
These gloss black exhaust tip bezels replace the factory bezels on 2019–2023 Sierra 1500 trucks and are sold as a left/right pair. They are manufactured to match the bumper recesses so installation is straightforward and uses the truck's existing mounting points with no drilling required. The finish closely matches GM onyx black and reviewers report a durable painted surface that holds up in wet and winter conditions. Because they are a direct replacement, the parts keep the factory appearance while swapping chrome for a blacked-out look. Installation can be fiddly because access to some bolts requires removing the recessed bumper steps or using an extended ratchet, so plan for an hour and basic hand or powered tools. The product does not include replacement clips, so reuse original hardware or purchase new body clips if needed. Overall, this set is a practical way to get a factory-fit, corrosion-resistant black finish without cutting or modifying the bumper.
Best for: Buyers who want a factory-style blacked-out look on a 2019–2023 Sierra 1500 and value a direct-fit, corrosion-resistant replacement that keeps the truck’s original appearance.
Less Ideal for: Drivers looking for a plug-and-play swap without any disassembly or those who prefer a dramatic aftermarket tip shape or larger diameter outlet.
- Direct replacement design that lines up with bumper recesses for a factory fit
- Gloss black finish that closely matches GM onyx black for a cohesive appearance
- Durable materials and finish reported to resist weather and road conditions
- No drilling or bumper modification required when installed with existing mounting points
- Accessing the mounting bolts can be difficult and may require removing bumper step pieces or special tools
- Does not include new mounting clips or body hardware
Verdict: Choose this when you want a reliably finished black exhaust tip that balances OEM-like fit, corrosion resistance, and easy installation for everyday truck use.
2. Richeer 3" Inlet x 5" Outlet Stainless Steel Exhaust Tip, 12" Long, Black Powder Coat
Best Budget Exhaust Tip
| Inlet outside diameter | 3" |
|---|---|
| Outlet diameter | 5" |
| Overall length | 12" |
| Finish | Black powder coated |
| Material | Stainless steel |
This Richeer exhaust tip is a simple bolt-on styling piece that slips over a 3" outside-diameter tailpipe to produce a larger 5" outlet and a more aggressive rear look. Installation is straightforward for a driveway job: clean the pipe, slide the tip on, then tighten the included clamp hardware or weld the joint for a permanent fit. The stainless body and black powder coat resist corrosion better than cheap chrome, and the rolled, slanted cut gives a finished appearance. Real-world users report it deepens the exhaust note slightly and holds up well to road grime when cleaned occasionally. Fit can be picky because the tip expects a 3" O.D. tailpipe; the clamp locations may limit how far some pipes slide in, and minor trimming or grinding of interference points is sometimes needed. The piece is primarily cosmetic and will not affect power or emissions, and buyers wanting an exact factory-style match may prefer a different finish or OE-style tip.
Best for: Someone restoring or refreshing the Sierra 1500's rear styling on a budget who prioritizes an aggressive black finish and an easy DIY install over exact factory matching.
Less Ideal for: Drivers who need a precise factory-style replacement, exact color match to other trim, or a performance exhaust upgrade should consider other options.
- Bolt-on design with included clamp hardware for quick installation
- Stainless steel construction with black powder coat offers improved corrosion resistance over cheap chrome
- 5" outlet and slanted rolled edge deliver a noticeably more aggressive rear appearance
- Comes with basic installation tools and instructions for a DIY fit
- Fit is sensitive to actual tailpipe outer diameter and clamp hole placement which can limit insertion depth
Verdict: Pick this option if you need a low-cost black exhaust tip or bezel that improves rear styling while keeping parts and installation expenses minimal.
3. FEXON 2-Pack Exhaust Tip Bezels for Silverado/Sierra 2019–2024, Black
Best Direct-Fit OEM Exhaust Tip
| Compatible models | Silverado 1500 and Sierra 1500 2019–2024 |
|---|---|
| Included components | 2pcs Exhaust Tips Bezels |
| Installation type | Bolt-On |
| Replaces part numbers | 2253506, 84434641, 84434642, 84667764 |
| Shape | Round |
These FEXON exhaust tip bezels are a direct-fit replacement designed to swap into the bumper openings on 2019–2024 Silverado and Sierra 1500 trucks without cutting or drilling. The kit includes two round bezels that match the original mounting holes and list several factory part numbers they replace, so installation is mostly bolt-on and intended to restore a factory look or refresh damaged trim. Buyers will appreciate the black finish that tidies the tailpipe area and the advertised fitment to specific model years, which simplifies shopping for a like-for-like replacement. Some users report an easy, OEM-like fit and improved appearance, while a few noted fitment tightness or light spot welds on the pieces that required minor adjustment. Expect this to be a cosmetic repair rather than a performance upgrade; if exact factory metal thickness or long-term corrosion resistance is essential, confirm material and mounting condition before installing. Overall it suits owners wanting a straightforward bezel swap to regain a stock appearance quickly.
Best for: Buyers who want a like-for-like, factory-style exterior repair or refresh for the exhaust outlets on a 2019–2024 Silverado or Sierra 1500 and prioritize a seamless, stock appearance with minimal modification.
Less Ideal for: If you need a heavy-duty metal long-term corrosion solution or are modifying the exhaust for performance or custom styling, choose a specialized performance or stainless steel option instead.
- Direct bolt-on design that uses original mounting holes for straightforward installation
- Made to replace listed factory part numbers for an OEM-style fit
- Includes two bezels so both left and right outlets are refreshed
- Black finish improves the rear bumper appearance and hides discoloration
- Not a performance part; intended only for cosmetic replacement
- Some units may need light bending or adjustment for a perfect fit
Verdict: Use a direct-fit OEM-style bezel when you want a straight swap that matches factory dimensions and mounting points for a seamless, stock-looking repair or refresh.
4. AUTOSAVER88 2.75" Inlet x 3.5" Outlet 12" Stainless Steel Bolt-On Exhaust Tip, Black Powder Coat
Best Bolt-On Universal Exhaust Tip
| Inlet Diameter | 2.75 Inch |
|---|---|
| Outlet Diameter | 3.5 Inch |
| Overall Length | 12 Inch |
| Material Type | Stainless Steel |
| Finish Type | Black Powder Coated |
This AUTOSAVER88 exhaust tip is a simple bolt-on way to dress up the rear of a Sierra 1500 without welding or replacing the factory pipe. It slips over 2.75-inch outside diameter tailpipes and secures with included fasteners so installation is quick and reversible if you want to swap or reposition the tip. The stainless steel construction and powder coat help resist corrosion and give a stealth black look that matches dark bumpers and trim. The angled cut and thicker inner wall alter the exhaust tone, adding a deeper rumble without major volume increase. Because it is a universal bolt-on part you must measure the Sierra tailpipe carefully for a proper fit and tighten the clamp correctly to avoid movement; some buyers report coating wear under heavy heat. This tip is best for owners who want an easy visual upgrade and a modest sound change while keeping the truck largely stock, but expect the finish to require occasional touch-ups with high-heat paint if it sees heavy use or high exhaust temperatures.
Best for: Someone who wants an easy, non-weld cosmetic upgrade and modest sound change for a GMC Sierra 1500, prioritizing fast installation and the option to remove or reposition the tip later.
Less Ideal for: Drivers seeking a permanent, high-heat professional finish or custom-fit factory-replacement tips should consider welded or vehicle-specific options instead.
- Bolt-on design installs quickly with an M6 Allen key, no welding required.
- Stainless steel body resists deformation and corrosion under normal use.
- Black powder coat provides a stealth look that suits darker Sierra trim.
- Angled cut and thicker inner wall add a deeper, sportier exhaust tone.
- Coating can discolor or burn off under prolonged high heat, requiring touch-up.
- Fits only 2.75-inch outside diameter tailpipes so precise measurement is required.
Verdict: Opt for a bolt-on universal tip when you need a fast, non-weld installation that fits common tailpipe diameters and is easy to swap or adjust.
5. shitoubaihuo Dual Black Chrome Exhaust Tip for GMC Sierra 1500 (2020–2026)
Best Black‑Chrome Coated Exhaust Tip
| Inlet diameter | 63mm |
|---|---|
| Outlet diameter | 76mm per outlet |
| Material | T304 stainless steel |
| Finish | Black chrome electroplating |
This dual exhaust tip is a bolt-on styling accessory that slides over a 63mm factory tailpipe and secures with built-in clamp bolts for a vibration-resistant fit. Made from T304 stainless steel with a black chrome electroplated finish and a thickened wall, it is intended to resist heat and corrosion better than ordinary painted tips while giving the rear a sportier, dual-outlet look. Installation is straightforward: clean the stock pipe, slide the tip on, align the outlets with the bumper cutout, then tighten the fasteners. The wide-diameter dual outlets and beveled double-wall edge give a more finished appearance and may slightly alter exhaust resonance toward a cleaner, deeper tone without adding noise. Important limitations are fitment and orientation: you must verify your truck’s tailpipe outer diameter matches the 63mm inlet and confirm whether the factory pipe is straight or curved, since the tip is not universally adaptable and may require adjustment to sit flush in the bumper opening.
Best for: Buyers who want a darker, longer-lasting coated tip to upgrade the rear appearance of a GMC Sierra 1500 or HD truck without welding and who prioritize corrosion resistance and a factory-style bolt-on installation.
Less Ideal for: Drivers who need a one-size-fits-all accessory or who have nonstandard or modified exhaust piping that does not match the specified inlet diameter and shape.
- Black chrome electroplated finish offers stronger heat and corrosion resistance than plain paint
- T304 stainless steel construction with thicker walls for improved durability
- Bolt-on clamp design installs without welding and resists vibration at speed
- Dual wide outlets and beveled double-wall edge deliver a sporty, finished appearance
- Requires matching a 63mm inlet and correct pipe curvature so it may not fit every factory tailpipe
Verdict: Select a black-chrome or professionally coated tip if you prioritize a darker, longer-lasting finish that holds up better to heat and road salt than plain paint.
6. TMOFMS Weld-On Stainless Steel Exhaust Tip, 2.5" Inlet x 4" Outlet, 18" Length, Black (2-Pack)
Best Weld‑On Heavy‑Duty Exhaust Tip
| Inlet size | 2.5 inch |
|---|---|
| Outlet size | 4 inch |
| Overall length | 18 inch |
| Material | Stainless Steel |
| Installation type | Weld-On |
This TMOFMS weld-on exhaust tip is built for a permanent, heavy-duty upgrade: constructed from stainless steel with a matte black wear-resistant coating and a rolled angle cut for a clean finished look. It installs by welding to a 2.5 inch tailpipe and the long 18 inch body helps the tip sit well clear of the bumper on full‑size trucks. Practical touches include a bottom drainage hole to shed condensation and rolled edges to avoid sharp burrs during installation. In real-world use the tip changes the tailpipe appearance to a deep, sporty look and should resist corrosion better than plain steel thanks to the stainless core and coating. Expect welding skill and tools to be required for a secure fit; this is not a clamp-on cosmetic piece. The main limitation is the inlet size requirement and universal fit claim — you must confirm your Sierra 1500 tailpipe measures 2.5 inches or plan to adapt the pipe, and welding is needed to realize the heavy‑duty attachment advertised.
Best for: GMC Sierra 1500 owners who want a permanent, heavy-duty visual upgrade and are comfortable having a technician weld the tip for a secure, long-lasting fit.
Less Ideal for: If you prefer a no-weld, reversible installation or your Sierra already has a larger or differently sized tailpipe, a bolt-on or clamp-on tip is a better choice.
- Weld-on design for a permanent, secure attachment
- Stainless steel construction with matte black coating for improved corrosion and scratch resistance
- Bottom drainage hole reduces water buildup and potential rust
- Rolled edge and angle cut for a polished, burr-free finish
- Requires welding skills and tools for proper installation
Verdict: Choose a weld-on heavy-duty tip when you want a permanent, robust upgrade with thicker material and secure attachment for demanding use or custom exhaust work.
Choosing the Right GMC Sierra 1500 Black Exhaust Tip: Key Factors to Consider
Fitment and Outlet Diameter
Correct fitment is the single most important factor for the GMC Sierra 1500. Tailpipe diameters vary between engine and exhaust packages, so matching the tip s inlet to your truck s outlet ensures a secure attachment and prevents wobble or rubbing. An inlet that is too large may require shims or aftermarket adapters, while an inlet that is too small risks poor engagement and eventual loosening.
Beyond inlet size, check the tip s overall length and how it aligns with the bumper cutout and rear overhang. A protruding tip can catch on obstacles or violate local regulations, while an overly recessed tip looks unfinished and can trap soot against the bumper. Measuring from the exhaust outlet to the bumper edge before buying reduces guesswork and helps you choose a tip that centers properly and maintains safe ground clearance.
Mounting Style and Hardware
Mounting style determines how easy the installation is and how secure the tip remains under daily use. Bolt-on and clamp-on options are popular because they avoid cutting or welding the factory exhaust; good-quality models include corrosion-resistant clamps and sufficient overlap to prevent slippage. Some tips use internal setscrews that bite into the pipe for extra security, but these can make removal more difficult and risk deforming thinner factory pipes.
Weld-on tips offer the most permanent fit but require professional welding and add complexity to future exhaust work. Also consider whether the tip includes anti-rattle sleeves or rubber grommets to damp vibration. For dual exhaust setups or offset outlets, confirm the tip s mounting geometry so both sides sit symmetrically and clear the bumper.
Material and Finish Durability
Material choice affects longevity and how well the finish holds up against road chemicals and heat. Stainless steel substrates resist corrosion and are common even when a black finish is applied. Coating quality matters for black tips because cheap finishes can blister, flake, or fade with heat exposure and road salt. Powder-coated finishes typically offer good initial appearance, but high-heat ceramic or PVD-style finishes are more resistant to discoloration over time.
Also assess whether the interior of the tip is treated or left raw. Untreated interiors can develop surface rust that spreads to edges and mounting hardware. Look for tips that specify heat-resistant finishing and include hardware with matching corrosion resistance to avoid premature failure.
Shape, Outlet Profile, and Styling
The shape and profile of a black exhaust tip define the visual impact at the rear of a Sierra 1500. Round, angled-cut, slash-cut, and rolled-edge styles each give a distinct look. Consider how the chosen profile complements the truck s bumper lines and whether it aligns with other trim on the vehicle. Larger-diameter or dual-exit tips convey a performance aesthetic, while compact rolled-edge designs read more subtle and factory-like.
Pay attention to outlet orientation as well. Slash-cut or angled tips should be positioned to avoid directing soot onto the bumper. If your Sierra has a specific bumper recess or chrome trim, choose a profile that centers cleanly within that space to maintain symmetry and avoid interference with sensors or parking assist equipment.
Impact on Exhaust Sound and Backpressure
A simple tailpipe tip generally has minimal effect on overall exhaust flow, but certain shapes and internal designs can influence perceived sound. Tips with large resonant chambers, internal baffles, or reverse cones may slightly alter tone at cruising RPMs. For a stock Sierra 1500, opt for a tip designed to preserve factory flow characteristics unless your goal is a marked change in exhaust note.
Excessively restrictive inlets or internal inserts can increase backpressure, which is undesirable for turbocharged or high-output variants. Choose a tip with a smooth internal diameter and an inlet at least as large as the factory outlet to avoid introducing measurable restriction.
Ease Of Installation And Maintenance
Consider how much time and effort you are willing to invest. Bolt-on tips that include all necessary hardware typically install in under an hour with basic tools and require occasional tightening. If the tip requires bumper removal, trimming, or welding, budget extra time and, if needed, professional labor.
Maintenance also matters for a black finish. Some coatings need specific cleaning methods to preserve appearance, such as avoiding abrasive polishes. Choose a finish you can maintain with the products you already use or are willing to buy and follow the manufacturer s care guidance to keep the tip looking new.
Measuring Your Sierra S Exhaust Before You Buy
Measure from the end of the factory tailpipe to the bumper edge and record the outlet diameter before ordering a tip. Also note any bumper recess, parking sensor locations, and heat shield position that could affect tip placement.
- Measure outlet diameter with calipers or a tape measure across the widest point.
- Record the gap between the outlet and bumper to choose proper tip length.
- Note any asymmetry or dual-exit layout so both sides match visually.
Bolt-On Versus Weld-On: Which Suits Your Skill Level
Bolt-on tips are ideal for owners who want a reversible, low-effort upgrade. They typically clamp over the existing pipe and use set screws or clamps for retention. Weld-on tips deliver a permanent, factory-integrated look but need welding skills or shop time and make future exhaust changes harder.
- Bolt-on: fast install, reversible, suitable for DIY.
- Weld-on: permanent, seamless appearance, requires professional work if you lack welding experience.
Maintaining a Black Finish in Harsh Climates
Road salt and frequent winter driving accelerate finish wear. Rinse the tip regularly to remove salt and grit, and use mild, non-abrasive cleaners to preserve coatings. If the finish shows surface deposits, use manufacturer-recommended products rather than aggressive polishes that can strip protective layers.
- Rinse after salty or sandy drives.
- Avoid abrasive pads that can scratch the finish.
- Apply a high-temperature polish or protective spray approved for coated metals if recommended.
Sizing Tips for Dual-Outlet or Offset Exhausts
For trucks with dual outlets or offset pipes, ensure matching tips are chosen in pairs so the rear stance looks balanced. Small mismatches in length or angle become obvious once both sides are installed, so buy paired components or confirm the product listing supports matched sets.
If one side requires a different offset, measure both outlets independently and select tips that allow sufficient inlet overlap for secure clamping.
- Measure both outlets separately before ordering.
- Choose matched pairs to ensure symmetry.
- Verify inlet overlap for secure clamp engagement.
Tools and Basic Steps for a Typical Installation
Most bolt-on installations only require basic hand tools: a ratchet or wrench set, tape measure, and possibly a file to clean burrs on the factory pipe. Work on a cool exhaust and use jack stands or ramps when needed to access the outlet safely.
Follow manufacturer torque guidance for clamps and set screws and check fitment after a short drive because thermal cycling can cause initial settling.
- Basic tools: ratchet, wrenches, tape measure, penetrating oil if removing old hardware.
- Work on a cool exhaust and use proper supports for safety.
- Re-check hardware after initial drive to ensure no loosening.
Still looking for the perfect fit?
Select your GMC Sierra 1500 configuration to see the most relevant Exhaust Tips recommendations
How We Chose the Best GMC Sierra 1500 Black Exhaust Tip
We focused on features and real-world fitment that matter to GMC Sierra 1500 owners. Selection began by filtering options that match common Sierra 1500 tailpipe diameters and mounting styles so each candidate provides reliable, repeatable fitment. We prioritized corrosion resistance and finish durability, giving weight to coatings or materials designed to withstand road salt, heat cycling, and UV exposure. Mounting method and adjustability were evaluated next, with attention to bolt-on stability, clamp coverage, and whether a tailpipe trim requires welding for secure installation. We evaluated ease of installation for DIYers, looking at whether hardware is included and how much trimming or disassembly of the rear bumper or heat shield is typically required. Sound and flow impacts were considered to ensure the tip does not create unwanted drone or backpressure risks on stock exhaust systems. Finally, we excluded options that require modifying the vehicle s exhaust system, that do not list compatible outlet diameters, or that lack corrosion-resistant finishes. The remaining picks reflect durability, fitment confidence, and straightforward installation for Sierra 1500 owners.
Our full evaluation process is outlined in our review methodology.
FAQ
Will adding a black exhaust tip change my Sierra 1500 s engine performance?
Most basic exhaust tips are cosmetic and have negligible impact on engine performance when matched to the factory outlet size. Only tips with internal baffles or extremely restrictive inlets can affect backpressure enough to matter, which is uncommon on stock Sierra setups.
Can I install a black exhaust tip myself or do I need a shop?
Many bolt-on black tips are designed for DIY installation with hand tools and clear instructions. Weld-on tips or those requiring bumper trimming are best handled by a shop if you lack welding experience or the tools to safely remove bumper components.
How do I prevent the black finish from peeling or fading?
Regular cleaning to remove road salt and grit helps. Use mild cleaners and avoid abrasive pads. Choose tips with high-heat-rated coatings and, where recommended, apply protective sprays designed for coated metal finishes.
What should I measure on my Sierra 1500 before buying a tip?
Measure the tailpipe outlet diameter, the distance from the outlet to the bumper edge, and note any bumper recesses or sensor locations. For dual outlets measure both sides to ensure matched fitment.
Are clamp-on tips secure enough for daily driving and light off-road use?
Quality clamp-on tips with sufficient overlap and corrosion-resistant hardware are generally secure for everyday driving and light off-road use. Ensure clamps are properly torqued and periodically inspect for loosening after off-road trips.
Final Verdict
Prioritize fitment, mounting style, and finish durability when choosing a black exhaust tip for your GMC Sierra 1500. Correct inlet diameter and sufficient overlap reduce the risk of loosening, while higher-quality coatings and stainless steel substrates extend visual life in wet or salty conditions. Balance the visual effect you want with installation complexity: bolt-on tips give a fast, reversible change, while weld-on options are more permanent but require professional work. With careful measurement and attention to finish materials, you can select a tip that enhances your truck s look without creating installation headaches or premature wear.
Explore More:
- Check out all GMC Sierra 1500 parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
