Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you drive a Honda Pilot, choosing the right oil filter housing affects engine cleanliness, leak prevention, and how straightforward routine service will be. A well-made housing helps the engine maintain consistent oil pressure, minimizes the chance of seepage, and makes filter changes less messy and faster. This guide highlights the top shortlisted oil filter housings for the Honda Pilot and explains the evaluation criteria we used, including build quality and sealing performance. Use the guide to understand tradeoffs and find a housing that matches your priorities for durability and ease of maintenance.
Looking for other parts? See all Honda Pilot parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | ULZOZN Oil Filter Housing with 2 Sealing O-rings (Replace 15310R40A00) |  |
| Best Quality Built to a higher standard if you want something more solid | DriveFix Oil Filter Housing for Honda CR-V 2007–2009 (15310-RZA-000) |  |
| Best Budget The cheapest option that still gets the job done reliably | EMIHO 2-Pack Oil Filter Base Housing Gasket (fits Honda Pilot 2013–2021) |  |
| Most Sold A high-volume bestseller chosen again and again | INFINAUTO Engine Oil Filter Housing Assembly (Aluminum) |  |
| Best Value for Money The sweet spot between price and what you get | NewYall Engine Oil Filter Housing Case for L4 2.4L Honda |  |
| Best Overall The best all-around choice for most situations | A-Premium Oil Filter Housing with 2 O-Rings for Honda 2.4L Engines |  |
1. ULZOZN Oil Filter Housing with 2 Sealing O-rings (Replace 15310R40A00)
| Fitment | Honda 2.4L L4 (CR-V 2010-2014, Civic 2012-2015, Accord 2008-2012, Crosstour 2012-2015) |
|---|---|
| Material | Metal housing; cellulose/synthetic filter media referenced |
| Includes | 1 housing and 2 sealing O-rings |
| Replacement Part Number | Replace 15310R40A00 |
This oil filter housing is a vehicle-specific replacement for Honda 2.4L four-cylinder engines and comes with two sealing O-rings for a plug-and-play swap. It replaces part 15310R40A00 and is intended for routine repairs or when the original housing shows leaks or damage. The housing is metal with a high-strength base and uses corrosion-resistant materials, which helps it withstand engine bay heat and road conditions. The included seals and claimed sealing design aim to prevent oil leaks and keep contaminants out of the oil circuit. Installation is straightforward for a competent DIYer or tech because it is a direct fit and ships with the necessary O-rings. Limitations to keep in mind are typical of aftermarket parts: finish and tolerances can vary between batches and long-term durability depends on installation torque and gasket seating; the product listing does not include an individual filter element so that remains a separate purchase. For reliability-focused buyers this housing offers a practical, factory-replacement style fix when the original unit fails.
Best for: A reliability-focused buyer who prioritizes a factory-style replacement to fix leaks or a damaged oil filter housing on a Honda Accord with a 2.4L engine and wants a straightforward, repair-oriented solution.
Less Ideal for: Buyers looking for a complete oil change kit with filter media included or those who prefer parts with extended manufacturer-backed warranties should consider alternatives.
- Vehicle-specific design for direct replacement on compatible Honda 2.4L engines
- Metal housing and corrosion-resistant materials for improved durability in the engine bay
- Includes two sealing O-rings so you can replace the housing and seals together
- High-strength base construction to resist impacts and internal pressure changes
- Does not include an oil filter cartridge so additional parts may be required
- Long-term durability depends on correct installation and seal seating which can vary with user technique
Verdict A practical, metal, vehicle-specific oil filter housing with seals included that suits reliability-minded Honda Accord owners needing a direct replacement.
2. DriveFix Oil Filter Housing for Honda CR-V 2007–2009 (15310-RZA-000)
| Fitment | Honda CR-V 2007-2009 |
|---|---|
| Replace Part Number | 15310-RZA-000 |
| Product Grade | Replacement Part |
| Number of Items | 1 |
This DriveFix oil filter housing is a direct replacement designed to eliminate leaks and restore the factory-style oil filter mount on compatible Honda CR-V models. It installs in place of the original housing and is typically used during a repair when the filter base or its seals have failed; swap time is short for anyone comfortable under the hood. The listing specifies the matching part number and includes one housing, so technicians can replace the whole base rather than chasing individual O-rings. Practical benefits include a simple, bolt-on fix that stops oil seepage and avoids an expensive dealer part bill, and user photos and reviews report straightforward fitment and quick leak resolution. Limitations are that this is an aftermarket replacement rather than a branded factory part and the listing does not include additional seals or fasteners, so you should confirm and have any necessary O-rings or mounting hardware on hand before starting the job.
Best for: Performance-oriented buyers who prioritize restoring reliable, leak-free operation quickly and prefer a high-quality replacement part that lets them get the engine back to peak condition without dealer downtime.
Less Ideal for: Buyers who require an exact factory-branded part or a repair kit that includes all seals and fasteners should consider sourcing from a dealer or a full kit option.
- Vehicle-specific fit for Honda CR-V 2007–2009 matching part 15310-RZA-000
- Simple bolt-on replacement that can stop oil leaks quickly
- Sold as a single complete housing for a one-part repair
- Lower-cost alternative to dealer-sourced replacement parts
- Aftermarket part rather than factory-branded component
- Does not explicitly include O-rings or mounting hardware in the package
Verdict A cost-effective, vehicle-specific replacement housing that fixes oil leaks quickly for performance-minded Honda CR-V owners, but plan to source seals separately.
3. EMIHO 2-Pack Oil Filter Base Housing Gasket (fits Honda Pilot 2013–2021)
| Manufacturer | EMIHOus |
|---|---|
| Fits | Honda Pilot 2013-2021 |
| Package | 2 pieces |
This 2-piece gasket set replaces the oil filter base housing seal on compatible Honda Pilot engines and is aimed at a simple, budget-friendly repair. The gaskets are molded from treated rubber intended to resist heat and oil exposure so they maintain a tight seal at the filter housing and prevent leaks that can affect engine lubrication. Installation is straightforward — the kit includes two gaskets and you swap the old seal for the new one with basic hand tools while changing the oil filter. The product emphasizes durability and high-temperature resistance, which matters when the engine runs hot or under towing loads. Limitations are typical for aftermarket seals: fitment must be checked against your vehicle and the factory part number, and these are a direct replacement rather than an upgraded OEM-style component, so long-term lifespan may vary by driving conditions. For an inexpensive, do-it-yourself fix to stop oil seepage at the filter housing on a Pilot, this set covers the basics without extras.
Best for: Budget-conscious owners who want a low-cost, DIY repair to stop oil leaks at the filter housing on a Honda Pilot and prioritize immediate, affordable maintenance.
Less Ideal for: Owners seeking a high-end or performance upgrade to the factory seal or those who prefer parts that come with extended manufacturer support should consider OEM or dealer-sourced replacements.
- Sold as a two-piece set so you have a spare or can service two vehicles.
- Molded rubber construction treated for high temperature and oil resistance to maintain sealing under heat.
- Simple direct-replacement design allows installation with basic tools during a filter change.
- Aftermarket fit requires verifying compatibility with the Pilot’s specific engine and part number before installation.
- Not marketed as a premium or improved design over factory-spec parts, so longevity may vary.
Verdict A low-cost, straightforward gasket set that gets a leaking Pilot filter housing sealed again without the expense of dealer parts.
4. INFINAUTO Engine Oil Filter Housing Assembly (Aluminum)
| Manufacturer | INFINAUTO |
|---|---|
| Position | Front |
| Manufacturer Part Number | IFN240318a001050 |
| ASIN | B0D3QLJ444 |
This aluminum oil filter housing replaces a factory-style plastic housing to reduce the chance of heat-related cracking and oil leaks. It is installed in place of the original housing and is secured with the same mounting bolts and hoses after draining the oil and cleaning the gasket surface. The housing’s aluminum construction offers improved heat and corrosion resistance compared with plastic originals, which can extend service life and lower the risk of sudden failure. Users will appreciate that it comes as a single complete housing ready for direct swap-in when the fitment matches. Caveats are that correct fitment must be confirmed for the vehicle and installation requires oil draining and basic mechanical work, including torqueing bolts to spec and replacing any seals or gaskets. There is no filter cartridge included and compatibility is listed for specific Audi and Volkswagen applications rather than Honda Pilot, so buyers should verify fit before purchasing for other models.
Best for: Risk-averse mainstream buyers who prioritize a durable, less failure-prone replacement part and want a direct replacement they can fit or have a shop install with confidence.
Less Ideal for: Buyers seeking a plug-and-play replacement specifically for Honda Pilot without confirming fitment should look for housings listed for that model, and DIYers who want a complete service kit with filter and seals included may prefer a different listing.
- Aluminum construction reduces heat-related cracking compared with plastic housings.
- Corrosion resistant finish helps prevent oil leaks over time.
- Sold as a complete housing for a direct swap when fitment is correct.
- Compatibility is specified for Audi and Volkswagen models, so fitment for other vehicles is not guaranteed.
- Does not include oil filter element or new gaskets, which must be purchased separately.
Verdict A more durable aluminum replacement housing that cuts the plastic-housing failure risk, but confirm Honda Pilot fitment and buy seals and a filter separately.
5. NewYall Engine Oil Filter Housing Case for L4 2.4L Honda
| Compatible engines | L4 2.4L Petrol |
|---|---|
| Compatible vehicles | Honda models using 2.4L L4 engine |
| Manufacturer | NewYall |
This NewYall oil filter housing is a direct-replacement style assembly designed for Honda L4 2.4L petrol engines and is used where the factory housing is cracked, leaking, or the mounting surfaces are damaged. It installs in place of the original housing and accepts the factory filter and related seals, so it is typically used during oil system repairs to stop leaks or when performing a full housing swap. The listing highlights compatibility with several Honda models that use the 2.4L L4 engine; for the article focus on the Honda Pilot, confirm your Pilot has the 2.4L engine before purchasing. Buyers report it resolves leaks and can save significant labor and dealer costs, though some users found the included gaskets or O rings did not fit precisely and machining quality varied. In practice this part is a cost-effective option if you need a full housing replacement and are prepared to reuse OEM seals or source correct gaskets when necessary. Expect savings over dealership parts but allow time to verify seal fitment during installation.
Best for: Practical optimizers who prioritize cost savings and are willing to verify or replace seals during installation to keep maintenance affordable.
Less Ideal for: Buyers seeking a perfect drop-in, factory-identical part without any post-purchase verification or those who prefer dealer-supplied assemblies with guaranteed gasket fitment.
- Direct-replacement housing designed for Honda 2.4L L4 engines to address leaks or housing damage
- Accepts factory oil filter and can be installed as a one-for-one swap
- Lower-cost alternative to dealer replacement parts that can reduce repair bills
- Included gaskets or O rings may not match factory fit and sometimes require OEM seals
- Some buyers reported uneven machining and a plasticky feel compared with factory parts
Verdict A budget-friendly full housing replacement for Honda 2.4L engines that can save money if you confirm seal fitment or reuse OEM gaskets.
6. A-Premium Oil Filter Housing with 2 O-Rings for Honda 2.4L Engines
| Fitment | Designed for Honda 2.4L engines |
|---|---|
| Replaces | OEM 15310-R40-A00 / 15310R40A00 |
| Package contents | 1 oil filter base + 2 seals |
| Manufacturer | PremiumpartsWhosale |
This oil filter housing replaces the factory housing for Honda 2.4L engines and is supplied as a ready-to-install unit with two thickened seals. It is intended for straightforward DIY or shop replacement and the listing claims a plug-and-play fit that should let most installations finish within 15 minutes. The package includes the housing and two o-rings so you do not need to source extra seals when changing the assembly. Real-world buyer feedback shows many users achieved an exact fit and leak-free service after installation, though a few reported machining imperfections and gasket fit issues that required light filing or adhesive to seat the seal correctly. The manufacturer also advertises a one-year unlimited-mileage warranty. For routine maintenance on compatible Honda 2.4L models this housing offers a practical way to replace a worn or cracked base without modifying the engine, but some units may need minor finishing or careful gasket seating before final torque to ensure a perfect seal.
Best for: Balanced buyers who want a practical, ready-to-install replacement housing to restore a Honda 2.4L engine's oil filter assembly without paying for dealer parts.
Less Ideal for: Drivers seeking guaranteed factory-quality finish or those unwilling to inspect and prep a replacement part before installation should consider an alternative from a dealer or higher-end supplier.
- Direct replacement designed for Honda 2.4L engine housings so it aligns with factory mounting points.
- Includes two thickened seals so you get the housing and necessary o-rings in one kit.
- Advertised as plug-and-play which enables quick DIY installation or fast shop service.
- Many buyers report leak-free operation after installation when the mating surfaces are clean and seals are seated properly.
- Some units show machining imperfections inside the housing which can require light filing or inspection before use.
- A few customers reported that the supplied gasket/o-ring required adjustment or adhesive to fit the carb-shaped channel perfectly.
Verdict A convenient, cost-effective direct replacement for Honda 2.4L oil filter housings that usually fits and seals well but may need light prep on some units.
Choosing the Right Honda Pilot Oil Filter Housing: Key Factors to Consider
Fitment and Compatibility
Correct fitment ensures the housing aligns with the engine’s oil passages, mounting bosses, and sensor ports. A housing that matches the Pilot’s dimensions prevents stress on bolts and mating surfaces, reducing the chance of leaks or premature failure. Compatibility also covers integration with stock oil filters and any pressure or temperature sensors. Choosing a housing designed for the vehicle avoids aftermarket workarounds and keeps service simple, since standard filters and seals can be used without modification.
Material Strength and Resistance to Cracking
Materials and wall thickness determine how well a housing tolerates heat cycling and mechanical stresses. Durable alloys or reinforced composites resist warping and cracking over time, especially in areas around bolt holes and the filter mounting face. A housing prone to cracking can cause sudden oil loss and engine damage. Evaluate manufacturing methods and look for parts designed to withstand the Pilot’s thermal and vibration environment to reduce the risk of failure.
Sealing Design and Gasket Quality
The sealing interface is where most leaks originate, so housing designs that support a proper gasket or o-ring seal are essential. A generous gasket seat, even compression surfaces, and reliable retainer features all contribute to a leak-resistant assembly. Gasket material selection matters too. Elastomers that tolerate oil, heat, and time maintain sealing force longer. Consider how easy it is to access and replace the housing gasket during routine maintenance to keep the engine leak-free.
Serviceability and Maintenance Access
Serviceability affects how quickly you can change the oil filter and replace seals. Housings that provide clear access to bolts, use standard fasteners, and minimize trapped oil during removal make routine work faster and cleaner. Design features such as integrated drain paths, convenient bolt patterns, and clearances for tools reduce shop time and lower the chance of damaging sealing surfaces during service.
Thermal and Corrosion Resistance
The engine bay exposes parts to temperature extremes and corrosive agents. Materials and finishes that resist corrosion extend service life and maintain sealing surfaces. Thermal stability prevents distortion that can break seals or change mating geometry. Consider coatings, anodizing, or corrosion-resistant alloys that maintain structural integrity and appearance through years of heat cycles and environmental exposure.
Compatibility With Sensors and Oil Lines
Many housings incorporate ports for pressure or temperature sensors and connection points for oil cooler lines. Ensuring these ports are present, correctly sized, and located reduces the need for adapters and preserves system reliability. A housing that integrates sensors and line fittings in the correct locations prevents routing complications and potential leak points, keeping the engine’s lubrication monitoring and cooling subsystems functioning properly.
FAQ
What are common symptoms of a failing oil filter housing?
Common signs include visible oil leaks around the housing, a drop in oil pressure, and oil on nearby engine components. You may also notice a burning oil smell if leaking oil contacts hot surfaces. These symptoms often indicate a compromised seal, a cracked housing, or loose fasteners and should be inspected promptly.
Can I replace only the gasket or should I replace the entire housing?
If the housing body is intact and free of cracks or warping, replacing the gasket or o-ring often resolves leaks. However, if there is visible damage, corrosion, or repeated seal failures, replacing the entire housing is usually the safer long-term option. Assessment of the housing surface and sealing boss should guide the decision.
How do I tell if the housing is cracked versus just leaking at the seal?
A seal leak usually shows oil concentrated at the gasket joint and may appear after oil changes. A cracked housing often leaves oil trails or distinct wet spots away from the gasket interface. Cleaning the area and running the engine briefly can help pinpoint the origin. If in doubt, inspect for hairline cracks or consult a technician.
Are aftermarket housings as reliable as original equipment?
Aftermarket housings vary widely in quality. Well-made aftermarket options can match OE performance if they use suitable materials and accurate manufacturing tolerances. Important factors are fitment accuracy, material strength, and sealing design. Verify that any aftermarket part is intended for the Honda Pilot and meets the durability needs for engine service.
How often should I inspect the oil filter housing and seals?
It is practical to inspect the housing during every oil change and whenever you notice oil spots under the vehicle. Regular visual checks for seepage, loose fasteners, or deteriorating gasket material help catch issues early. More frequent inspection is wise if the vehicle operates in harsh climates or sees heavy use.
What should I do if the housing port for a sensor is damaged?
A damaged sensor port can cause leaks or incorrect readings. If threads or sealing surfaces are compromised, repair options are limited and often involve replacing the housing. Temporary repairs can risk further damage and are not recommended for a critical lubrication monitoring port.
How We Chose the Best Honda Pilot Oil Filter Housing
We focused on components engineered specifically for the Honda Pilot and evaluated candidates across several category-specific criteria. Primary filters were for fitment and compatibility with the Pilot engine layout, ensuring correct mounting points and oil flow paths. We assessed material and manufacturing quality because brittle or low-grade housings are prone to cracking and long-term degradation. Sealing performance was critical; we looked for designs that minimize leak paths and provide reliable gasket or o-ring interfaces. Serviceability was another key factor, favoring housings that make routine filter changes and seal replacement straightforward. Finally, we considered corrosion resistance and thermal stability to ensure parts withstand engine bay heat cycles. We excluded items that required vehicle-specific modification, generic universal housings, or components not intended for long-term engine service. The resulting list prioritizes housings that meet fitment requirements, resist cracking, and provide strong sealing characteristics.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing an oil filter housing for a Honda Pilot, prioritize correct fitment, strong material construction, and a sealing design that resists leaks. Serviceability and thermal resistance are important secondary considerations that influence long-term reliability. Balance the tradeoffs between ease of maintenance and long-term durability. Inspect housings and seals regularly, and opt for parts that match the Pilot’s mounting and sensor requirements to reduce the chance of future issues.
Explore More:
- Check out all Honda Pilot parts & accessories
- Explore Engine
- Browse all Auto Parts
