Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Upgrading the speakers in your Mercedes-Benz GLA can make the factory audio sound fuller, clearer, and more enjoyable on daily drives. Choosing the right 6×8 speakers matters because fitment, power handling, and mounting depth affect both sound and installation ease. This guide covers a short list of top picks for the Mercedes-Benz GLA that meet common fit and performance needs. We evaluated options based on sound quality, installation compatibility, and build quality to help you identify the best match for your priorities. Read on for concise guidance before you view the shortlisted products.
Looking for other parts? See all Mercedes-Benz GLA parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs) |  |
| Best Quality Built to a higher standard if you want something more solid | Mercedes‑Benz Genuine Tweeter Speaker 231-906-22-00 |  |
| Best Value The sweet spot between price and what you get | JBL Club 8620 5×7/6×8 2-Way Coaxial Car Speakers (pair) |  |
| Best budget The cheapest option that still gets the job done reliably | ORION Cobalt Series CB683 6×8” 3-Way Coaxial Car Speakers (Pair) |  |
| Highest Rated A top-rated pick with lots of positive feedback | Kenwood KFC‑C6866S 6×8 2‑Way Car Stereo Speakers (Pair) |  |
| Most popular A crowd favorite that many people choose with confidence | MB Quart FKB168 6×8" 200W Coaxial Car Speakers (4-pack) |  |
| Best Seller A high-volume bestseller chosen again and again | Rockford Fosgate Punch P1683 6×8 3-Way Coaxial Car Speakers (Pair) |  |
1. Alphasonik AS268P 6×8-inch 3-Way Car Speakers (2 Pairs)
| Speaker Type | 3-Way Speaker |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92 dB |
| Frequency Response | 28 – 22,000 Hz |
| Included Components | 4x Speakers, Coaxial Cables, Mounting Screws |
The Alphasonik AS268P is a four-piece 6×8-inch 3-way speaker kit intended as a direct-swap upgrade for factory door or rear speakers. It includes two pairs of 6×8 speakers, mounting screws and pigtail leads so installation in a vehicle with 6×8 locations is straightforward. The speakers advertise 350W max (35W RMS each), a 28–22,000 Hz frequency range and 92 dB sensitivity, which translates to noticeably clearer mids and highs compared with many stock units when driven by a factory head unit. Because they are three-way coaxials, they integrate a woofer, mid and tweeter to deliver fuller frequency coverage without separate components. Practical benefits are improved vocal clarity and louder overall output on a stock system, plus shallow mounting depth for tighter door fitments. Limitations are modest RMS power handling and limited low-bass response, so drivers seeking deep punch will want a dedicated subwoofer and possibly an amp for headroom. Build quality is acceptable for the price but not premium, and some fitment or wiring adaptors may be needed depending on factory connectors.
Best for: Balanced buyers who want a clear, affordable upgrade to their factory 6×8 speakers on a Mercedes‑Benz GLA and value improved day-to-day listening without major system changes.
Less Ideal for: Audiophiles seeking deep, punchy bass or owners wanting a factory-quality, long-term waterproof solution should consider component speakers plus a subwoofer or higher-end options instead.
- Includes two pairs and basic installation hardware for a near plug-and-play swap in vehicles with 6×8 openings
- 3-way coaxial design provides improved midrange and treble clarity over typical factory speakers
- High sensitivity (92 dB) makes them louder with a stock head unit without an amp
- Shallow mounting depth helps fit into tighter door pockets
- Low RMS power per speaker limits clean bass output at high volumes
- Not water resistant so longevity may be reduced in high-humidity door locations
- Build and materials are budget-level compared with higher-end aftermarket speakers
Verdict: A cost-effective 6×8 3-way kit that meaningfully improves clarity and volume for everyday listening in a Mercedes‑Benz GLA but will need a sub or amp for robust bass.
2. Mercedes‑Benz Genuine Tweeter Speaker 231-906-22-00
| Speaker Type | Tweeter |
|---|---|
| Mounting Type | Bracket Mount |
| Enclosure Material | Metal, Silk |
| Connectivity Protocol | RCA |
| Power Source | Corded Electric |
This genuine Mercedes‑Benz tweeter (231-906-22-00) is a factory replacement part intended to restore or maintain the vehicle's premium high-frequency performance. It installs using a bracket mount and is built with a metal enclosure and silk diaphragm typical of automotive tweeters, so it reproduces detail and crisp highs when paired with the rest of the factory sound system. The speaker is a stereo-capable tweeter that connects through standard RCA-type audio interfaces and runs from the vehicle's corded electrical audio system, making it suitable for use in the center or upper coupe/convertible locations indicated by the part diagram. Because it is a genuine manufacturer part, fitment and voicing match factory audio calibration, which benefits listeners who want accurate high-frequency response without aftermarket tuning. Limitations are that this is a single tweeter sold as one item and it is not a full coaxial or multi-driver speaker, so upgrading overall system output will require complementary midrange and woofer components or additional factory-matching parts.
Best for: Performance-oriented owners who prioritize accurate, factory-voiced high-frequency detail and want a direct replacement to preserve the Mercedes premium audio character.
Less Ideal for: Buyers looking for a full 6×8 upgrade package or higher overall system output should consider complete component sets rather than this single tweeter.
- Factory-quality fit and voicing for Mercedes‑Benz premium audio systems
- Silk diaphragm tweeter design yields smooth, detailed high frequencies
- Bracket mount makes installation in factory locations straightforward
- Designed specifically for in-car audio placement identified in the OEM diagram
- Sold as a single tweeter rather than a matched pair or full speaker set
- Not a full-range or coaxial speaker so it cannot replace midrange/woofer duties
Verdict: A factory Mercedes‑Benz tweeter that restores accurate, premium high-frequency detail in compatible vehicle premium audio systems.
3. JBL Club 8620 5×7/6×8 2-Way Coaxial Car Speakers (pair)
| RMS power (each) | 55 watts |
|---|---|
| Peak power (each) | 165 watts |
| Impedance | 3 Ohms |
| Frequency response | 65Hz – 20kHz |
| Sensitivity | 93 dB |
The JBL Club 8620 is a two-way coaxial speaker pair aimed at replacing factory woofers in vehicle doors or rear panels. In use you wire them into the car audio system and mount them with the supplied brackets or adapters; they are commonly driven by the head unit or a small amplifier. Notable features include a polypropylene woofer cone with rubber surround, an edge-driven PEI dome tweeter, 55 watts RMS per speaker (165 watts peak each), and a 3 ohm impedance that helps extract more power from modest factory radios. Practical benefits are stronger bass response and clearer high end versus many factory GLA speakers, plus a compact tweeter and included crossovers to protect the drivers. Limitations include no speaker wiring provided and adapter gaps that can reduce bass unless sealed, and they will benefit noticeably from additional amp power or door sealing for best low-frequency performance. Installation may require small hardware and trimming for a perfect fit in some factory openings.
Best for: Practical optimizers looking for the best sound-per-dollar improvement in their Mercedes‑Benz GLA who prioritize measurable gains over high-end audiophile fidelity.
Less Ideal for: Audiophiles seeking reference-level clarity or users who want a fully plug-and-play kit with all installation hardware and wiring included should consider higher-tier component systems or amplified solutions.
- Balanced two-way design with PEI dome tweeter for clear highs
- Polypropylene woofer with rubber surround for punchy midbass and durability
- Includes crossovers and mounting adapters for a straightforward replacement install
- Relatively high sensitivity (93 dB) for good output from factory head units
- No speaker wire or installation screws included
- Adapter fitment can leave gaps that reduce bass unless sealed properly
- 3 ohm impedance may demand careful matching with some factory amplifiers
Verdict: A cost-effective speaker upgrade that delivers noticeably better bass and clarity in the GLA when paired with proper sealing or modest amplification, but plan to source small installation parts separately.
4. ORION Cobalt Series CB683 6×8” 3-Way Coaxial Car Speakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| Power Handling (Peak) | 280W |
| Power Handling (RMS) | 70W |
| Frequency Response | 75Hz-20kHz |
| Sensitivity | 87.5 dB |
The Orion CB683 is a budget-focused 3-way coaxial speaker pair built to upgrade factory sound without a complicated install. Each speaker combines a polypropylene cone, butyl rubber surround and a dedicated tweeter and midrange to cover 75Hz–20kHz; Orion rates them at 70W RMS and 280W peak with 4 ohm impedance. In practice these elements give stronger mid-bass and clearer highs than many stock 6×8 units, and the claimed 87.5 dB sensitivity helps them play loudly with a factory head unit or modest amplifier. Installation is aimed at DIYers — marked connections and a bracket-mount design make fitment straightforward in many rear or door locations, though some vehicles may need minor trimming or adapters to sit flush. On the downside they are not waterproof and larger than some stock speakers, so fitment can be tight in certain GLA mounting pockets and an amp may be required for consistently cleaner sound at high volume. For a budget replacement they deliver punch and clarity that punches above their price class.
Best for: Budget-conscious drivers who prioritize loud, fuller sound for daily driving and want an affordable, DIY-friendly speaker upgrade for their GLA.
Less Ideal for: Audiophiles seeking reference-level clarity or owners who need weatherproof, direct-fit replacements without any modification should look at higher-end or vehicle-specific options.
- 3-way coaxial design provides improved highs and midrange compared with basic factory speakers
- Polypropylene cone with butyl rubber surround for durability and reduced distortion
- Rated sensitivity and power handling allow loud output with a stock head unit or small amp
- Bracket-mount design and marked connections simplify DIY installation
- Not waterproof so exposure to moisture can shorten lifespan
- Physical size may require trimming or adapters to fit some vehicle mounting pockets
Verdict: A wallet-friendly 3-way 6×8 speaker that delivers stronger bass and clearer highs than typical stock units but may need space or an amp to reach its full potential.
5. Kenwood KFC‑C6866S 6×8 2‑Way Car Stereo Speakers (Pair)
| Impedance | 4 Ohms |
|---|---|
| Max Power | 250 Watts |
| RMS Power | 30 Watts |
| Tweeter Diameter | 1 Inches |
These Kenwood 6×8 two-way speakers serve as a direct replacement option for vehicles that accept 6×8 drivers. They combine a polypropylene paper cone woofer with a 1-inch PEI balanced-dome tweeter to improve midbass punch and high-frequency clarity compared with many factory speakers. Typical installation is as a door or rear parcel shelf replacement where you retain a factory head unit and wiring; the speakers are low-profile to fit shallow mounting locations. Practical benefits include improved vocal detail and cleaner highs at modest power levels and straightforward wired connectivity that keeps the system simple. Limitations are that they are not tuned for deep bass so they will not replace a subwoofer, and they require proper mounting or adapters for a perfect fit in some vehicles. Expect reliable, everyday performance rather than audiophile-level output.
Best for: A reliability-focused buyer who wants a straightforward factory-quality speaker upgrade that improves clarity and midrange performance while keeping installation and system complexity low in their Mercedes‑Benz GLA.
Less Ideal for: People seeking deep bass or high-power, show-level output who prefer component systems and external amplification should look at component speakers and subwoofers instead.
- Balanced-dome 1-inch tweeter for improved high-frequency clarity
- Polypropylene paper cone woofer that delivers solid midbass and midrange detail
- Shallow mounting height designed to fit tighter factory locations
- Wired coaxial design keeps installation and integration simple
- Not designed to produce strong low-frequency bass without a separate subwoofer
- No vehicle-specific mounting hardware included, which may necessitate adapters or extra wiring work
Verdict: A dependable, low-profile 6×8 factory-replacement speaker that sharpens vocals and highs for everyday driving but will need a subwoofer for strong bass.
6. MB Quart FKB168 6×8" 200W Coaxial Car Speakers (4-pack)
| Speaker Type | Coaxial, Tweeter |
|---|---|
| Impedance | 4 Ohms |
| Speaker Maximum Output Power | 200 Watts |
| Tweeter Diameter | 1 Inches |
| Frequency Response | 20 KHz |
These MB Quart FKB168 6×8 coaxial speakers are a bolt-in upgrade intended to replace factory units and deliver clearer highs and stronger midrange than typical stock speakers. They are supplied as a four-pack and use aluminum dome tweeters, polypropylene cones, butyl surrounds and a ferrite motor to balance clarity and durability for daily driving. Practical features include an internal 6 dB crossover for smoother tweeter integration and a Kapton voice-coil former for better heat dissipation during longer listening sessions. In real-world use they perform best when paired with a modest aftermarket head unit or an amplifier; the speakers can sound tight and articulate at moderate power but will reveal limited low-bass without a subwoofer or added power. Installation is straightforward for standard 6×8 openings and the build materials aim for weather resistance in door locations, though no grilles are included. If you want a convenient, drop-in way to sharpen your Mercedes-Benz GLA factory soundstage these provide a noticeable step up, but do expect to add amplification or a sub for full-range performance.
Best for: Convenience-driven buyers who want a straightforward, factory-style speaker upgrade to improve clarity and detail in their Mercedes-Benz GLA without complex installation or tuning.
Less Ideal for: Audiophiles who expect deep bass from coaxials or drivers looking for a complete high-power system without adding an external amplifier or subwoofer should consider component speakers or a powered bass solution instead.
- Designed as a direct 6×8 replacement for simple drop-in installation in standard openings
- Aluminum dome tweeters deliver clear, reliable highs
- Butyl rubber surrounds and stamped steel frames improve durability in door installations
- Internal crossover included for smoother midrange-to-tweeter transition
- Limited low-frequency extension without a dedicated sub or amplifier
- No speaker grilles or mounting hardware included in the package
Verdict: A convenient, drop-in 6×8 upgrade that sharpens highs and midrange for the Mercedes-Benz GLA but benefits from added amplification or a sub for full bass impact.
7. Rockford Fosgate Punch P1683 6×8 3-Way Coaxial Car Speakers (Pair)
| Speaker Type | Coaxial |
|---|---|
| Power (Max) | 130 Watts |
| Impedance | 4 Ohms |
| Frequency Response | 65 Hz |
| Speaker Size | 8 Inches |
The Punch P1683 delivers a performance-focused 6×8 coaxial speaker option for Saturn Vue owners looking to upgrade factory sound without major modifications. Each pair combines a 6-inch woofer with an integrated PEI dome tweeter and built-in crossover to produce clearer highs and tighter mids than typical stock speakers. The mineral-filled polypropylene cone and butyl rubber surround resist cone flex at higher volumes so the speakers maintain definition up to their 130 watt peak power rating. The FlexFit basket helps align the speaker to factory mounting points for easier install into many 6×8 openings. In real-world use the P1683s provide noticeably more presence and cleaner treble for modern music, and they pair well with a small amplifier if you want extra headroom. Expect improved clarity and louder, punchier sound compared with stock units, but keep in mind they are not weatherproof and require proper mounting and wiring to avoid distortion at extreme volumes.
Best for: Performance-oriented buyers who prioritize clearer highs and stronger midbass from a direct-fit 6×8 replacement and want a durable, factory-style upgrade for daily driving and spirited listening.
Less Ideal for: Users seeking weatherproof or marine-rated speakers or those who need a plug-and-play wireless audio solution should consider other options.
- 3-way coaxial design with PEI dome tweeter for clearer high frequencies
- Mineral-filled polypropylene cone and butyl rubber surround for controlled midbass output
- 65 Watts RMS (130 W peak) provides higher output than typical factory speakers
- FlexFit basket eases alignment with factory mounting holes for simpler installation
- Not waterproof so not suited for exposed or heavily humid installations
Verdict: The P1683 pair gives Saturn Vue owners a high-quality, direct-fit 6×8 upgrade that delivers clearer highs and punchier midbass with easy factory-style installation.
Choosing the Right Mercedes-Benz GLA 6X8 Speakers: Key Factors to Consider
Physical Fit and Mounting Depth
Speaker dimensions and mounting depth determine whether a 6×8 speaker will install cleanly into the Mercedes-Benz GLA mounting locations. Accurate measurements prevent interference with window mechanisms, door panels, and factory brackets. A speaker that is too deep may require trimming or adapter plates, which adds installation time and potential for rattle. A proper fit reduces the need for enclosures or custom work and preserves factory appearance.
Always compare the speaker's cutout size and mounting bolt pattern to the vehicle specifications, and allow for grille clearance. If you plan to reuse factory grilles, confirm that the aftermarket speaker's frame and grille mounting are compatible.
Power Handling and Amplifier Compatibility
Power handling, expressed as RMS and peak ratings, indicates how much continuous power the speaker can accept without damage. Matching speaker RMS to the output of your head unit or amplifier helps avoid distortion and premature failure. Speakers with higher RMS ratings usually pair well with external amplifiers, while lower-power speakers are often suitable for factory head units.
Consider sensitivity alongside power handling. A higher-sensitivity 6×8 speaker will produce louder output from the same power level, which matters if you plan to keep the stock head unit. Ensure the speaker can tolerate short-term peaks without clipping when driven hard.
Sensitivity and Efficiency
Sensitivity measures how effectively a speaker converts amplifier power into audible sound, typically shown in decibels at 1 watt/1 meter. A more efficient 6×8 speaker will sound louder at a given power level, benefiting vehicles that rely on factory head units with limited output. Lower-sensitivity speakers can still sound excellent but often require more amplifier power to reach the same volume and dynamics.
Balance sensitivity with desired sound character; highly efficient speakers can be paired with modest power for spirited listening, while lower-efficiency designs may aim for richer tone at the cost of requiring amplification.
Frequency Response and Sound Balance
Frequency response describes the range of frequencies a speaker can reproduce and indicates tonal balance. For 6×8 speakers used in door locations, a broad, even midrange is critical because mids carry vocals and instruments. Extended low-frequency performance helps with perceived bass, though true deep bass may still require a subwoofer.
Look for speakers that present a neutral midrange and natural treble without harsh peaks. Consider whether you prefer a warmer sound with emphasized midbass or a more neutral, accurate presentation; that choice will influence which 6×8 speaker character suits your listening style.
Driver Materials and Build Quality
Cone and surround materials affect durability, sound character, and resistance to cabin humidity and temperature changes. Polypropylene and treated paper cones are common for balanced performance, while woven composites and mica-reinforced cones can offer additional stiffness and detailed reproduction. Surround materials influence excursion and damping, which affects bass response and control.
Robust motor structures, quality voice coils, and corrosion-resistant terminals improve long-term reliability in a car environment. Prioritizing solid construction reduces the chance of voice coil overheating or mechanical failure under sustained use.
Crossover Design and Tweeter Integration
For coaxial or component 6×8 speakers, the quality of the crossover and how the tweeter integrates with the midrange determines imaging and high-frequency clarity. A well-implemented crossover ensures smooth transition between drivers and reduces phase issues that can smear detail.
Component-style setups that separate tweeters allow more flexible placement and potentially better soundstage, while coaxial designs offer simpler installation. Evaluate whether the crossover provides adjustable levels or high-pass options to tailor treble balance to your vehicle acoustics.
How We Chose the Best Mercedes-Benz GLA 6X8 Speakers
To assemble this list we focused on factors that matter for replacing factory speakers in the Mercedes-Benz GLA. Our primary criteria included physical fit and mounting depth to ensure proper installation in GLA door locations, and audio performance characteristics such as frequency response and sensitivity to deliver a noticeable improvement in clarity and bass. We also evaluated power handling and recommended amplifier compatibility so speakers work well with typical factory or aftermarket head units. Build quality and materials were considered to ensure longevity in the vehicle environment, and we checked for reliable terminal and grille design to simplify installation. We excluded options that required extensive custom fabrication or that did not offer clear fitment guidance for the Mercedes-Benz GLA. The resulting shortlist emphasizes sensible balance between sound, durability, and straightforward installation.
Our full evaluation process is outlined in our review methodology.
FAQ
Will any 6×8 speaker fit my Mercedes-Benz GLA?
Not every 6×8 speaker will fit without modification. While the nominal size matches, differences in mounting depth, bolt pattern, and frame thickness can affect installation. Check the speaker's cutout dimensions, mounting hole spacing, and overall depth against the GLA's specifications before purchasing.
Do I need an amplifier for upgraded 6×8 speakers?
It depends on the speakers' sensitivity and power handling and on your head unit's output. Many modern 6×8 speakers work acceptably with a factory head unit, but lower-sensitivity or higher-power models benefit from an external amplifier to achieve cleaner dynamics and higher volume without distortion.
Are coaxial or component 6×8 speakers better for a GLA?
Coaxial 6×8 speakers simplify installation because the tweeter is mounted to the same frame, which is helpful when mounting options are limited. Component setups can offer better imaging and treble detail if you can place the tweeters and run separate wiring. The right choice depends on your installation constraints and desired soundstage.
How important is mounting depth for replacement speakers?
Mounting depth is crucial because shallow door cavities, window regulators, or wiring channels can interfere with deep speakers. A speaker that is too deep may rub or prevent the door panel from reattaching properly. Measuring the available depth and comparing it to the speaker specification avoids these issues.
Can upgraded 6×8 speakers improve bass without a subwoofer?
Upgraded 6×8 speakers can improve perceived bass through better midbass response and cleaner cone control, but they have physical limits compared with a dedicated subwoofer. For fuller, lower bass, adding a subwoofer remains the most effective solution, while better 6x8s enhance punch and clarity in the lower midrange.
Conclusion
When selecting Mercedes-Benz GLA 6×8 speakers, prioritize physical fit, mounting depth, and sensitivity to match your installation and head unit. Balance power handling with the amplification you plan to use and consider driver materials and crossover quality for long-term performance.Tradeoffs are inevitable: coaxial convenience versus component performance, or higher power capacity versus the need for an amplifier. Focus on the factors that match your listening goals and installation constraints to find the right 6×8 speakers for your GLA.
Explore More:
- Check out all Mercedes-Benz GLA parts & accessories
- Explore Electronics
- Browse all Accessories
