Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
When you drive a Toyota Corolla, having a compact, secure way to carry extra fuel can be reassuring for long trips or unexpected detours. The right Toyota Corolla jerry can fits your vehicle, stows neatly, and makes refueling simpler when stations are scarce. This guide presents six shortlisted jerry cans chosen for compact fitment, safe handling, and practical capacity. Below you will find concise evaluations focused on capacity, material, mounting and spill prevention to help you pick the best option for your Corolla.
Looking for other parts? See all Toyota Corolla parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Racewill 2-Pack Lockable Jerry Can Mounts for 5-Gallon Cans |  |
| Best Quality Built to a higher standard if you want something more solid | Mayouko Lockable 20L Steel Jerry Can Holder Rack |  |
| Best Budget The cheapest option that still gets the job done reliably | WINMAX Tools Automotive 5-Gallon Steel Jerry Can Holder |  |
| Most Sold A high-volume bestseller chosen again and again | SPARKWHIZ Jerry Can Holder 2-Pack — Steel Mount Brackets for 20L Jerry Cans |  |
| Best Value for Money The sweet spot between price and what you get | SPARKWHIZ Jerry Can Holder — Lockable Steel Mount for 20L Jerry Can |  |
| Best Overall The best all-around choice for most situations | Wavian USA 20L NATO-Style Jerry Can with Spout |  |
1. Racewill 2-Pack Lockable Jerry Can Mounts for 5-Gallon Cans
| Mounting Type | Wall Mount, Corner Mount |
|---|---|
| Set Name | 2 Pack |
| Finish Type | Powder Coated |
| Compatible Can Size | 5 Gallon jerry can |
These Racewill jerry can mounts are steel brackets intended to hold standard 5-gallon metal or Scepter-style cans and secure them with a lockable top strap. You typically bolt the frames to a flat surface in a trunk, hatch area, or truck bed and slide the can into the cradle where the top strap locks over the filler neck. The powder coated cold-rolled steel construction gives a sturdy feel and the pair includes two identical mounts so you can carry two cans side by side. Practical benefits include theft deterrence thanks to the hasp for a padlock and a compact footprint that keeps cans upright and organized while driving. Limitations are that the kit does not include mounting hardware and some buyers report variation in fit with certain can brands, so test fitment before permanent installation; thin sections and exposed bolt holes can make alignment tricky in tight vehicle spaces. These mounts work best when fastened to a flat, reinforced surface and when you plan for modest modification or additional fasteners to prevent vibration loosening.
Best for: Reliability-focused buyers who prioritize secure, repeatable storage for extra fuel on longer trips and want a lockable, factory-style mounting solution for their Corolla.
Less Ideal for: Buyers seeking a bolt-on solution that requires no drilling or adjustment or those who prefer a universal, tool-free quick-release can mount.
- Lockable top strap adds theft deterrence and secures the can while driving
- Powder coated cold-rolled steel construction offers corrosion resistance for outdoor use
- Sold as a two-pack so you can mount a pair of 5-gallon cans together for extended range
- Compact design holds cans upright to reduce spillage risk during transport
- No mounting hardware included so bolts and lock(s) must be sourced separately
- Fit can vary between jerry can brands and some metal cans may require modification to fit properly
- Some thin stamped areas and closed bolt holes make on-vehicle installation and hole alignment more difficult
Verdict A sturdy, lockable two-pack for securing 5-gallon cans in a Corolla, but plan to supply hardware and check can fit before final installation.
2. Mayouko Lockable 20L Steel Jerry Can Holder Rack
| Capacity | 20 Liters |
|---|---|
| Manufacturer | Mayouko |
| Batteries required | No |
This Mayouko holder is a welded cold-rolled steel rack that secures a 20L NATO-style steel jerry can and accepts a padlock for theft protection. It installs using the pre-drilled mounting points and stainless steel screws and can be fastened to Toyota Corolla-compatible mounts or cargo accessories where space and load allow. In use it keeps cans upright and reduces rattling during transit, and the top bar aligns with standard jerry can handles so insertion and removal are straightforward. Notable features include a lock-ready design, upgraded stainless fasteners to reduce rust at attachment points, and multiple mounting holes for flexible positioning. The holder is strictly a metal frame so buyers must supply a compatible 20L steel can and mounting hardware for the Corolla’s cargo area or roof-rack adapters. Some users report the outer ring can bow under heavy off-road stress, so it is best for secure road hauling and occasional rough roads rather than extreme off-road rock crawling.
Best for: Performance-oriented owners who prioritize a secure, lockable mounting solution for carrying an extra steel fuel can on a Toyota Corolla for long trips or emergency range extension.
Less Ideal for: Buyers wanting a freestanding carrier, a complete can-and-holder combo, or a vibration-isolated mounting system for intensive off-road use should consider other options.
- Solid cold-rolled steel construction for a secure mount
- Lockable design provides theft deterrence when paired with a padlock
- Pre-drilled mounting points and supplied stainless screws simplify installation
- Fits standard 20L NATO-style steel jerry cans and holds them upright during transport
- Does not include the gas can so a compatible 20L steel can must be purchased separately
- Frame can deform under sustained heavy off-road abuse according to some users
- No built-in straps or cushioning to prevent metal-on-metal contact with the can
Verdict A sturdy, lock-ready steel holder that gives performance-focused Corolla owners a secure way to carry a 20L steel jerry can, but you must supply the can and avoid extreme off-road use.
3. WINMAX Tools Automotive 5-Gallon Steel Jerry Can Holder
| Material | Alloy Steel |
|---|---|
| Capacity | 5 Gallons |
| Fit type | Universal Fit |
| Finish | Powder coated |
This steel jerry can holder is a basic, budget-friendly mounting solution for carrying a 5-gallon steel fuel can. It is full metal construction with a powder-coated finish to resist corrosion and arrives assembled with a top strap that locks the can in place. Typical use is mounting it to a rear bumper, trailer, or custom rack to carry an extra can for longer trips. The pre-drilled base and universal-fit design make installation straightforward, though some buyers report having to trim or modify the strap tab or re-drill holes to match their specific can or mounting points. The unit is heavy enough to feel robust and holds NATO and common 5-gallon cans tightly, but welding and fit tolerances vary part to part so occasional filing or adjustment may be required. If you want a no-frills, low-cost way to carry an extra steel can on a Corolla-mounted rack or trailer hitch carrier, this holder does the job with modest DIY work rather than plug-and-play perfection.
Best for: Budget-conscious buyers who prioritize a low-cost, durable way to carry an extra steel fuel can on short trips or emergency use and who are comfortable making minor fitment tweaks.
Less Ideal for: Buyers seeking a refined, bolt-on factory-style mount or those who want perfect out-of-the-box fitment without any modification should look for a higher-end, vehicle-specific carrier.
- Solid all-metal construction for rugged daily use
- Powder-coated finish helps resist surface corrosion
- Pre-drilled mounting base for common bumper or rack attachment
- Lockable top strap secures a 5-gallon steel can during transport
- Fit and alignment tolerances can require drilling or trimming during installation
- Top strap may not close cleanly on all can lid designs without modification
- Some units show uneven welds or loose hinge fit that need adjustment
Verdict A sturdy, inexpensive steel can holder that secures a 5-gallon jerry can well if you accept occasional installation tweaks.
4. SPARKWHIZ Jerry Can Holder 2-Pack — Steel Mount Brackets for 20L Jerry Cans
| Recommended Can Type | 20L steel jerry can |
|---|---|
| Mounting | Multi-surface, pre-drilled holes |
| Finish Type | Powder Coated |
| Included Components | Hardware |
These SPARKWHIZ brackets are a two-pack of steel jerry can mounts designed to hold a 20L (5-gallon) steel can. Each bracket features pre-drilled screw holes on the bottom and sides for flexible mounting positions and a top retention strap that can be padlocked. The powder-coated finish helps resist rust for outdoor use and the kit includes mounting hardware for straightforward assembly. In practice you would bolt a bracket to a rack, cargo basket, or a fixed point in a vehicle trunk and seat the can into the cradle, then secure the strap. The adjustable design and rubber padding on contact points reduce rattling and protect the can. Limitations to note are that the retention strap and locking hook are basic and not highly tamper-proof, and one-off quality issues have been reported with the bands; some buyers chose to reinforce welds or hardware. These mounts are best for securely carrying a standard steel jerry can when you need a compact, bolt-on solution rather than an integrated OEM-style fuel carrier.
Best for: A risk-averse mainstream buyer who wants a simple, durable aftermarket mount to carry an extra steel jerry can on trips in a Toyota Corolla without modifying the vehicle heavily.
Less Ideal for: Not suitable for users seeking a high-security, tamper-proof fuel system or for those who need mounts for non-steel Scepter-style fuel containers.
- Pre-drilled multi-surface mounting holes for flexible installation locations
- Powder-coated steel resists rust and extends outdoor service life
- Includes hardware and rubber contact pads to reduce noise and protect the can
- Adjustable top strap accepts a padlock for basic theft deterrence
- Lock strap and hook are basic and can be manipulated despite a padlock
- Some units show quality inconsistencies such as broken bands or weak welds
- Not compatible with Scepter-style plastic cans
Verdict A compact, powder-coated steel mounting kit that reliably carries a 20L steel jerry can for Corolla owners who want a straightforward, bolt-on solution but not maximum theft protection.
5. SPARKWHIZ Jerry Can Holder — Lockable Steel Mount for 20L Jerry Can
| Material | standard version |
|---|---|
| Special Feature | Lockable |
| Mounting Type | Floor Mount |
| Recommended Uses For Product | Fuel Storage for Outdoors, Garage Fuel Organization |
This SPARKWHIZ jerry can holder is a simple steel mounting bracket designed to hold a 20 liter (5 gallon) NATO-style jerry can securely to a vehicle or rack. It installs with screws through pre-drilled holes on the bottom and sides so you can position it vertically or horizontally depending on where you mount it. The top retention strap accepts a padlock for theft deterrence and the black powder coat helps resist corrosion in outdoor use. For a Toyota Corolla it is most useful on a trunk-mounted or rear carrier setup where space is tight and a compact, lockable mount is needed. The bracket will not accept Scepter-style plastic cans and mounting hardware is not included, so plan to buy bolts or adaptors appropriate for your Corolla-specific carrier. Some buyers report surface rust on included hardware and occasional weld defects, so inspect welds and use stainless or galvanized fasteners if you need longer-lasting corrosion resistance.
Best for: Practical optimizers who want an affordable, compact, lockable mount to secure a steel 20L jerry can on a Corolla where space and budget matter.
Less Ideal for: Anyone who plans to carry non-NATO plastic fuel cans or needs a fully corrosion-proof, off-road rated carrier without replacing hardware should consider other options.
- Lockable top strap for theft deterrence with padlock compatibility
- Pre-drilled mounting holes for flexible mounting positions
- Powder-coated steel construction for basic corrosion resistance
- Sized for NATO/20L steel jerry cans for a close, stable fit
- Does not fit Scepter-style plastic gas cans
- Mounting hardware is not included
- Some users report rusting of supplied bolts and occasional weld quality issues
Verdict A budget-friendly, lockable steel mount that securely holds 20L NATO jerry cans but requires your own hardware and occasional corrosion-proofing to last outdoors.
6. Wavian USA 20L NATO-Style Jerry Can with Spout
| Capacity | 20 Liters |
|---|---|
| Fuel Type | Gasoline |
| Exterior | Powder coat paint |
This Wavian 20L jerry can is a heavy-duty, NATO-style metal gas can built for long-term fuel storage and secure transfer. Constructed from 0.9 mm cold-rolled steel with a powder-coat finish, it is intended for rough use and resists corrosion better than plastic alternatives. The bayonet-style quick-release nozzle and safety lock make spills unlikely when pouring into a vehicle tank, and the included self-venting spout lets fuel flow faster without glugging. For Toyota Corolla owners this can serve as a reliable emergency reserve to keep in the trunk or mounted on a roof rack when heading to remote areas. Expect professional-grade durability and a tight seal that prevents leaking even when laid on its side, but be aware the short plastic pour adapter and storage clip are finicky and some users find the nozzle length limiting for tight filler necks. Also the can can build pressure; open slowly to avoid spurting. Overall it trades lighter weight and low cost of plastic cans for longevity and airtight performance.
Best for: Practical, balanced buyers who want a rugged, long-lasting emergency fuel reserve for a Toyota Corolla and prioritize reliability over the lowest upfront cost.
Less Ideal for: Avoid this can if you need an ultra-lightweight, low-cost plastic container for occasional short trips or if you require a very long pouring spout without buying accessories.
- Durable 0.9 mm cold-rolled steel construction for long service life
- Powder-coat exterior and anti-corrosive coating enhance weather resistance
- Bayonet-style quick-release nozzle with safety lock minimizes spills during transfer
- Self-venting pour spout allows smooth, faster filling without glugging
- Designed to seal tightly so it will not leak when laid on its side
- Included plastic pour adapter and storage clip are flimsy and may not hold the spout securely
- Standard spout length can be short for some filler necks or tight access points
- Can develop internal pressure so it must be opened slowly to prevent spurting fuel
Verdict A professional-grade metal jerry can that delivers durable, leak-resistant gasoline storage for Corolla owners who want a dependable emergency fuel solution.
Choosing the Right Toyota Corolla Jerry Can: Key Factors to Consider
Capacity and Physical Size
Capacity determines how much fuel you can carry and directly affects weight and storage. For a small sedan, a moderate capacity that fits in the trunk or a designated cargo area without obstructing the spare tire or emergency tools is usually best. Consider how full weight will impact handling and whether the can’s dimensions allow upright storage to minimize sloshing.
Choose a size that balances added range with manageable weight and footprint. If you plan to store the can long term, smaller capacities reduce evaporative losses and maintenance needs.
Material and Corrosion Resistance
Materials affect durability, permeability to fuel vapors, and resistance to corrosion. Metal cans offer robustness and puncture resistance but can rust if coatings fail. Plastic cans resist corrosion and are often lighter, though they can degrade with prolonged exposure to certain fuels or UV light.
Look for high-density plastics rated for fuel contact or metal cans with protective linings. Material choice also influences long-term storage safety and maintenance requirements.
Nozzle, Venting, and Spill Prevention
A well-designed nozzle and venting system make filling and pouring safer and faster while reducing spills and vapor release. Short, rigid spouts are good for controlled pours, while flexible spouts can reach awkward filler necks. Vent features help maintain steady flow and prevent glugging, which reduces splash and overfill risk.
Consider how the can’s dispensing system interfaces with common vehicle filler necks and whether it includes caps or seals to prevent leaks during transport.
Mounting and Securing Options
How you secure a jerry can affects safety during travel and convenience of access. For a Toyota Corolla, look for cans that fit trunk-mounted brackets, cargo tie-downs, or compact carriers that do not require permanent vehicle modification. Secure fastening reduces movement, prevents damage, and limits spill risk in the event of sudden stops.
Evaluate whether mounting hardware is included, if the can can be easily removed for use, and how it will affect trunk space and accessibility.
Compatibility With Fuel Type
Confirm that the can’s materials and seals are compatible with the fuel you intend to store, whether gasoline or diesel. Some plastics absorb fuel or degrade faster with certain additives, while metal liners may be required for long-term diesel storage.
Knowing your intended fuel type helps you choose the right construction and labeling to avoid contamination or premature wear.
Safety Labels and Regulatory Features
Clear labeling, child-resistant caps, and built-in pressure relief can improve safe handling and transport. Look for cans with compliant markings or design elements that address common regulatory concerns about portable fuel containers. These features help reduce accidental misuse and simplify safe storage practices.
Prioritize designs that make it easy to identify contents and reduce ignition or vapor risks during normal use and transport.
FAQ
Is a jerry can safe to store in my Corolla trunk?
Storing a properly sealed jerry can in the trunk is usually safe if the can is designed for fuel storage and is secured to prevent movement. Keep the can upright, avoid storing it in direct sunlight for long periods, and ensure the cap and vent are closed. Regularly inspect the can for leaks or degradation to maintain safety.
What size jerry can is best for a compact sedan?
For a compact sedan, moderate sizes that fit upright in the trunk and do not exceed handling comfort when full are typically best. These sizes add meaningful range without occupying excessive cargo space or creating heavy handling changes. Think about how often you will need the extra fuel and how much trunk space you can spare.
Should I choose metal or plastic construction?
Both metal and fuel-rated plastic cans have pros and cons. Metal cans tend to be more puncture resistant, while plastic options resist corrosion and are often lighter. Consider durability, fuel compatibility, and how you will store the can when deciding between materials.
How can I minimize spills when refueling from a jerry can?
Select a can with a well-designed spout and venting to enable steady, controlled flow. Use a funnel or fitted spout when needed, pour slowly, and support the can to reduce wobble. Make sure the recipient filler neck is accessible and that the vehicle is on level ground to avoid overfilling.
Do I need special mounting hardware for a Corolla?
Specialized mounting hardware is not always necessary, but a secure method to fasten the can in the trunk or cargo area is important. Use existing tie-down points or compact carriers that do not require permanent modification. The goal is to prevent movement and protect both the can and the vehicle interior.
How often should I inspect a stored jerry can?
Inspect a stored jerry can before each trip and perform a more thorough check every few months if it remains unused. Look for signs of leaks, degraded seals, or material fatigue. Regular checks reduce the risk of unexpected failure and help maintain safe emergency fuel storage.
How We Chose the Best Toyota Corolla Jerry Can
We focused on features that matter for fitting and using a jerry can with a compact sedan like the Toyota Corolla. Key evaluation criteria included capacity relative to trunk and mounting space, material and corrosion resistance for long-term storage, nozzle and vent design to reduce spills and vapor loss, and secure mounting or stowage options for safe transport. We also considered ease of refueling, weight when full, and compliance with common safety and labeling recommendations for fuel storage. Products were excluded if they were clearly designed only for heavy-duty offroad rigs or required extensive vehicle modification to install. We omitted options that lacked basic safety features such as a secure cap or a venting system. The final shortlist prioritizes cans that balance compact dimensions, safe handling, and practical capacity for everyday Corolla owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Toyota Corolla jerry can means balancing capacity, material, and secure mounting so the can fits your trunk and meets your travel needs. Prioritize cans that offer safe dispensing, fuel-compatible construction, and mounting options that prevent movement during transport. Remember that tradeoffs are inevitable: larger capacity increases range but adds weight and space demands, while compact cans are easier to store but hold less fuel. Focus on the factors that matter most for your driving patterns and storage constraints.
Explore More:
- Check out all Toyota Corolla parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
