Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you own a Chrysler Town & Country and plan to carry skis or snowboards, choosing the right ski rack matters for safety, convenience, and vehicle fit. The wrong rack can lead to poor aerodynamics, insecure loads, or difficult installation. This guide covers seven shortlisted ski racks that fit the Town & Country, each evaluated for mounting compatibility, load capacity, and ease of use. Below you will find clear guidance on what to look for and why these options made the list.
Looking for other parts? See all Chrysler Town & Country parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Gravity Grabber The OG Ski & Snowboard Wall Mount (3-Pack) |  |
| Most Popular A crowd favorite that many people choose with confidence | Rhino-Rack Ski and Gear Carrier, Lockable Dual Arms (Set) |  |
| Best Quality Built to a higher standard if you want something more solid | Skifavs 6-Pack Ski & Snowboard Wall Rack — Adjustable Rubber Grip Mounts |  |
| Best Budget The cheapest option that still gets the job done reliably | Tuwelvana Wall-Mount Ski Rack — Metal 10-Pair Capacity |  |
| Most Sold A high-volume bestseller chosen again and again | Ultrawall Wall-Mounted Ski Rack — 10-Pair Garage Ski and Snowboard Organizer |  |
| Best Value for Money The sweet spot between price and what you get | Skifavs Ski & Snowboard Wall Rack — 2-Pack Heavy-Duty Wall Mount |  |
| Best Overall The best all-around choice for most situations | Yakima PowderHound 6 Ski & Snowboard Roof Rack |  |
1. Gravity Grabber The OG Ski & Snowboard Wall Mount (3-Pack)
| Shelf Type | Hanging Shelf |
|---|---|
| Number of Shelves | 3 |
| Mounting Type | Wall Mount |
| Recommended Uses For Product | Skis, Snowboards |
| Material Type | Metal, Plastic, TPE |
The Gravity Grabber is a wall-mounted storage system that hangs skis, snowboards and poles using a gravity-locking arm and anti-slip rubber pads. Installation uses the included screws and drywall anchors or can be mounted to a board for extra strength; interlocking corners let you add additional units side by side. In daily use the swivel arms make it quick to pop gear in and out, the silicone-like grip prevents slipping and integrated pole hooks keep everything together for a single grab-and-go spot. The minimal wood-look design is intended to improve a garage or basement appearance while freeing floor space and safely supporting other items up to 20 pounds. Limitations to note are that each grabber is sized to accept a single snowboard and the supplied drywall anchors are basic quality, so heavier or repeated loading is best secured into studs or a mounted backing board. A small strap or bungee is not included for extra retention if you prefer that security.
Best for: A reliability-focused buyer who values secure, damage-free storage and a tidy garage and wants a durable, easy-access system for seasonal ski and snowboard gear.
Less Ideal for: If you need high-capacity commercial storage, vertical multi-board racks, or intend to hang very heavy tools frequently, consider a heavy-duty shelving system or purpose-built commercial racks instead.
- Gravity-locking swivel arm and anti-slip pads hold skis and boards securely without damaging bases or edges
- Integrated pole hangers keep poles with skis for quick grab-and-go organization
- Interlocking corners let multiple units be arranged to store several pairs neatly
- Minimal, wood-style design improves garage or basement aesthetics while saving floor space
- Designed to hold one snowboard per unit so it may not support back-to-back snowboard storage
- Included drywall anchors are basic and may not be sufficient for long-term heavy loads without mounting into studs or a backing board
Verdict A secure, attractive wall hanger that makes skis and boards easy to store and access, but for heavier loads mount into studs or a backing board for maximum reliability.
2. Rhino-Rack Ski and Gear Carrier, Lockable Dual Arms (Set)
| Load Capacity | 8 skis |
|---|---|
| Mounting Type | U-Bolt / C-Channel |
| Automotive Fit Type | Universal Fit |
| Included Components | 2 Ski Arms, Mounting Hardware, Universal Bracket |
This Rhino-Rack carrier is a simple, purpose-built roof-mounted clamp set that secures skis, snowboards, fishing rods and similar long gear using two lockable arms and universal mounting brackets. Install it on the Town & Country’s crossbars or factory roof racks using the supplied U-bolt and C-channel hardware; once tightened the rubber-lined arms clamp gear quietly and protect surfaces during highway drives. The carrier is aluminum, corrosion resistant, and rated to carry multiple skis or boards while keeping the cabin clean and dry. Loading is straightforward thanks to a glove-friendly release and included keys for locking when parked. Limitations: the locks are deterrent-level rather than theft-proof and some users report the rear arm can freeze in extreme winter conditions, and taller handles or large reels can reduce usable capacity. Expect to remove long rods or boards before opening the liftgate on smaller vehicles, so check clearance on the Town & Country before loading.
Best for: Convenience-driven buyers who prioritize quick, low-fuss gear transport and want a versatile roof solution they can lock and use seasonally on their Chrysler Town & Country.
Less Ideal for: People needing high-security racks or those who regularly carry very bulky single-piece rods or oversized boards that interfere with the liftgate should consider a different heavy-duty or fully enclosed carrier.
- Universal mounting brackets fit standard crossbars and channel mounts on roof racks
- Lockable, glove-friendly release mechanism for easy winter use
- Rubber grip profile protects skis, boards and rods and reduces rattling at speed
- Aluminum construction resists rust and is suitable for year-round outdoor use
- Lock cylinders are basic deterrents and not highly tamper resistant
- Rear lock or mechanism can seize in extreme cold if moisture freezes
- Larger rod handles or reel assemblies can limit the number of pieces that fit
Verdict A convenient, lockable roof clamp that makes seasonal ski and rod transport easy on a Town & Country but is best for users who accept basic security and occasional cold-weather fiddliness.
3. Skifavs 6-Pack Ski & Snowboard Wall Rack — Adjustable Rubber Grip Mounts
| Material | Rubber |
|---|---|
| Special Feature | Adjustable |
| Number of Shelves | 6 |
| Shelf Weight Capacity | 25 Pounds |
| Mounting Type | Wall Mount |
The Skifavs 6-pack is a wall-mounted system that holds skis, snowboards, poles and similar gear using soft rubber-clad arms that grip the ski body to prevent scratches and slipping. Each mount swivels and locks automatically, making one-handed loading and removal quick when you are preparing gear for a trip. The staggered, vertical layout saves floor space and keeps pairs organized together with included pole hooks. Installation requires mounting the brackets to a stud or a mounted board for reliable support since the included drywall anchors and screws are basic. The powder-coated finish resists garage wear and the adjustable clamp action accommodates different snowboard and ski thicknesses. Practical limitations are the 25 lb per shelf rating, which may constrain very heavy snowboards or loaded setups, and occasional reports of minor hardware defects mean checking components before installation is wise. For use with a Chrysler Town & Country, these racks let you keep seasonal ski gear tidy in the vehicle's garage or storage area and speed loading gear into the van.
Best for: Performance-oriented buyers who prioritize secure, low-damage storage and fast access to gear for regular ski trips; ideal for owners who want a compact, organized system for their garage or Town & Country loading area.
Less Ideal for: If you need to store very heavy snowboards or prefer a freestanding rack for frequent vehicle-mounted storage, consider a heavy-duty or mobile alternative instead.
- Soft rubber arms protect skis and snowboards from scratches and reduce slipping
- Swivel arms with automatic locking let you load and remove gear quickly one-handed
- Staggered vertical layout maximizes storage density for a garage or van storage area
- Powder-coated finish improves durability in a garage environment
- Includes hooks and basic mounting hardware for immediate installation
- Manufacturer-supplied screws and anchors are lightweight and many users prefer sturdier fasteners
- 25 pound capacity per mount limits use with very heavy snowboards or overloaded setups
- Occasional minor defects reported in pole hooks or single mounts requiring replacement
Verdict A durable, performance-oriented wall rack that protects skis and speeds access but requires solid mounting and is best for moderate-weight gear.
4. Tuwelvana Wall-Mount Ski Rack — Metal 10-Pair Capacity
| Number of Shelves | 2 |
|---|---|
| Shelf Type | Cantilever Rack |
| Mounting Type | Wall Mount |
| Material Type | Metal |
| Recommended Uses For Product | Sports Equipment, Tools |
This Tuwelvana wall-mount ski rack is a simple, budget-focused storage solution that mounts to a vertical surface and holds up to 10 pairs of skis using two 16-inch rails and five removable double hooks. Install involves drilling and driving the included anchors and screws into a garage or shed wall; for secure attachment to drywall or the interior panels of a Chrysler Town & Country it is best mounted into studs or with heavy-duty anchors and stronger screws than those supplied. The powder-coated metal construction resists rust and the hooks slide along the rails so you can space skis, boards, or long-handled tools for neat storage. Practical benefits include large capacity, modular hook placement, and a slim profile that frees floor space in a garage or large minivan storage area when mounted on a workshop wall. Limitations are the cheap mounting hardware in the box and the need for proper anchoring on vehicle interior panels if attempting any non-standard installation inside the Town & Country; this product is primarily intended for fixed-wall mounting rather than vehicle-integrated setups.
Best for: Budget-conscious buyers who want a high-capacity, no-frills wall storage solution to free floor space in a garage or shed and prefer practical, low-cost organization.
Less Ideal for: People seeking a factory-quality, vehicle-specific ski mounting system for the Chrysler Town & Country or anyone who needs a ready-to-install vehicle-integrated rack.
- Holds up to 10 pairs of skis with five double hooks for high-capacity storage
- Sliding hooks allow adjustable spacing to fit different ski or tool sizes
- Powder-coated metal construction resists rust and feels sturdy
- Detachable hooks and simple design keep a low-profile on the wall
- Included screws and plastic anchors are low quality and often replaced for secure installs
- Intended for wall mounting; not designed for factory-style integration inside a vehicle
Verdict A very affordable, heavy-capacity wall rack that clears floor clutter but requires better mounting hardware for secure installation.
5. Ultrawall Wall-Mounted Ski Rack — 10-Pair Garage Ski and Snowboard Organizer
| Material | Alloy Steel, Plastic |
|---|---|
| Mounting Type | Wall Mount |
| Number of Shelves | 5 hooks and 2 rail |
| Shelf Weight Capacity | 42.86 Pounds |
This Ultrawall wall-mounted ski rack is a simple garage organizer designed to hold up to 10 pairs of skis or several snowboards using two 32-inch rails and five adjustable hooks. It installs on a wall with pre-drilled holes spaced for stud mounting and includes anchors for drywall, so you can secure it in a garage, shed, or basement. The powder-coated alloy steel frame and rubber-sleeved hooks protect gear from scratches while supporting heavy loads; the listing states a combined capacity up to 300 pounds. In use the adjustable hook spacing helps accommodate different ski lengths, but several reviewers note modern wide/parabolic skis may not fit two per arm as pictured, so you will likely group pairs or use straps for stability. Installation is straightforward for a DIYer comfortable finding studs, though concrete or masonry will need appropriate fasteners. For Chrysler Town & Country owners who want to keep winter gear stored when not in the vehicle, this rack frees up floor space and keeps skis accessible, but check your ski widths and plan mounting location so tips are supported and not under tension.
Best for: A risk-averse mainstream buyer seeking a dependable, no-frills way to store winter gear off the floor and keep a Chrysler Town & Country clutter-free during off-season months.
Less Ideal for: If you need a dedicated snowboard-only solution or must hang very wide modern skis two-per-arm, consider alternative racks designed specifically for wide skis or boards.
- Heavy-duty powder-coated steel construction for corrosion resistance and durability.
- Adjustable 11-inch hooks and 32-inch rails let you change spacing to fit different ski lengths.
- Rubber sleeves on hooks protect skis from scratches and reduce slipping.
- Pre-drilled mounting holes and included hardware simplify wall installation for typical garage walls.
- May not comfortably hold two modern wide/parabolic skis per hook arm, so marketed 10-pair capacity can be optimistic.
- Not optimized for hanging snowboards without modification or straps.
- Requires appropriate anchors/fasteners for concrete or masonry walls which are not included.
Verdict A sturdy, easy-to-install wall rack that reliably frees garage space for Chrysler Town & Country owners, but verify ski width before counting on the full 10-pair capacity.
6. Skifavs Ski & Snowboard Wall Rack — 2-Pack Heavy-Duty Wall Mount
| Material | Metal |
|---|---|
| Special Feature | Wall-Mounted, Heavy Duty |
| Indoor/Outdoor Usage | Indoor |
| Shelf Weight Capacity | 22 Pounds |
| Size | 2 pack |
These Skifavs wall-mounted holders turn vertical garage or basement walls into compact ski and snowboard storage for a Chrysler Town & Country owner who needs to free up interior cargo space when gear is not in use. Each bracket secures boards or skis with soft rubber grip pads and an anti-slip design so edges and bases are protected while gear is stored upright. Installation is straightforward with the included hardware and the brackets lock around the ski for a tidy, grab-and-go setup; users can hang poles and small accessories on the hooks as well. The metal construction and a listed 22 lb shelf capacity mean the mounts are sturdy enough for most recreational skis and single boards, but the supplied screws have mixed reviews so swapping in stronger fasteners for drywall or masonry is advisable. The rack is an affordable, space-efficient option when you want to move bulky winter equipment out of the minivan and into organized wall storage, though it is not a ceiling system and does not provide covered protection from dust or moisture.
Best for: Practical optimizers who prioritize affordable, space-saving garage storage and want a reliable way to free up a Chrysler Town & Country’s cargo area when not transporting winter gear.
Less Ideal for: People who need weatherproof enclosed storage or a ceiling-mounted system; also not suited for those seeking a quick one-handed insertion mechanism.
- Soft rubber grips protect ski and snowboard bases from scratches while holding gear securely.
- Simple wall-mounted design saves floor and in-vehicle cargo space by storing gear vertically.
- Includes mounting hardware and accessory hooks for poles and small items.
- Metal construction provides a sturdy, long-term storage solution for seasonal gear.
- Included screws are reported as low quality and may need replacement for secure mounting on some walls.
- Holds individual skis or boards but does not offer full enclosure from dust or moisture.
Verdict A budget-friendly, space-saving wall rack that protects skis and boards while freeing up your Chrysler Town & Country’s cargo space, but consider upgrading the provided screws for durable installation.
7. Yakima PowderHound 6 Ski & Snowboard Roof Rack
| Mounting Type | Clamp Mount,Roof Mount |
|---|---|
| Capacity | 6 pairs of skis or 4 snowboards |
| Material | Alloy Steel |
| Fit Type | Universal Fit |
| Locking | Integrated SKS locks |
The Yakima PowderHound 6 is a roof-mounted ski and snowboard carrier designed to clamp onto factory-quality crossbars and carry up to six pairs of skis or four snowboards. It installs without tools and uses a large, glove-friendly release button to open the carrier for quick loading and unloading in cold conditions. Integrated Yakima SKS locks secure gear during stops and the alloy steel construction gives the rack a confidence-inspiring feel on long drives. In practice it is simple to fit to standard crossbars on a Chrysler Town & Country, holds gear tightly at highway speeds, and is straightforward to remove for off-season storage. Expect some wind noise compared with more aerodynamic covers, and a few users report occasional lock or hardware frustrations, so check keys and fasteners during installation. For a balanced buyer looking for dependable capacity, the PowderHound offers a reliable, easy-to-use solution with proven durability for seasonal use.
Best for: Balanced buyers who want a dependable, no-fuss roof solution for regular ski trips and value straightforward installation and secure on-road transport.
Less Ideal for: Buyers who prioritize minimal wind noise or the most aerodynamic, low-drag roof carriers should consider purpose-built low-profile alternatives.
- Carries up to 6 pairs of skis or 4 snowboards for family or group trips.
- Glove-friendly one-button access speeds loading and unloading in cold weather.
- Integrated locking (SKS) provides theft deterrence during stops.
- Tool-free clamp mounting fits standard roof crossbars for easy install and removal.
- Less aerodynamic design can produce noticeable wind noise at high speeds.
- Some users report intermittent lock or hardware issues requiring inspection or company support.
Verdict A practical, easy-to-install roof rack that balances capacity, security, and durability for routine ski trips on a Chrysler Town & Country.
Choosing the Right Chrysler Town & Country Ski Rack: Key Factors to Consider
Mounting Type
Mounting type determines how the rack attaches to your Chrysler Town & Country and affects compatibility, installation time, and stability.
Racks mount to roof rails, crossbars, a hitch, or the factory attachment points. Choose the style that matches your vehicle s existing hardware. Roof-mounted carriers keep the hatch accessible and avoid hitch wiring, while hitch-mounted options reduce wind noise and may be easier to load. Confirm the Town & Country s roof or hitch class supports the chosen system to prevent overloading and ensure safe mounting.
Load Capacity
Load capacity tells you how many skis or snowboards the rack can carry and whether it suits your typical group size.
Capacity varies by model and is often listed in pairs of skis or number of boards. Consider the combined weight of skis, bindings, and boards when evaluating limits. Choosing a rack with a modest margin above your usual needs reduces strain during long trips and helps maintain safe handling and braking performance.
Profile and Aerodynamics
A low-profile rack reduces wind resistance, noise, and fuel penalty while improving stability at highway speeds.
Slim, streamlined carriers tuck closely to the roof or hitch and are less likely to catch gusts. If you frequently drive long distances or at high speeds, prioritize designs that minimize protrusion. Low-profile options also make garage storage and parking under height restrictions easier.
Security and Locking
Integrated locks or the ability to add a lock help protect expensive skis and boards when parked away from you.
Look for racks with keyed locks for the carrier and for attachment points to the vehicle. Even simple locking mechanisms can deter opportunistic theft and prevent accidental opening. Consider whether replacement keys are available and how the lock interacts with your Town & Country s existing locking systems.
Ease of Use and Loading
How quickly and safely you can load gear affects everyday usability, especially in cold, windy, or crowded parking areas.
Features such as one-hand openers, tilt-away designs, or cushioned cradles reduce fuss while loading heavy skis or boards. Evaluate whether the rack height and clearances make rooftop loading realistic for you, or if a hitch-mounted unit would be more practical. Simple, repeatable attachment steps cut time at trailheads and reduce the chance of improper installation.
Materials and Weather Resistance
Durable materials and protective finishes prevent corrosion and wear from salt, snow, and UV exposure.
Aluminum and coated steel are common choices offering a balance of strength and rust resistance. Look for rubber or foam padding where gear contacts the rack to protect equipment and reduce vibration. Weather-resistant hardware and well-sealed locking components extend service life in winter conditions.
FAQ
Will a roof-mounted ski rack fit a Chrysler Town & Country?
Many roof-mounted ski racks are designed to work with factory rails or aftermarket crossbars on the Chrysler Town & Country. You should confirm the rack s clamp or channel dimensions match your vehicle s roof rails or crossbar profile. Installation instructions typically list compatible rail widths and crossbar types.
Is a hitch ski rack better than a roof rack for convenience?
A hitch-mounted rack often makes loading easier because gear sits lower and you do not need to lift items overhead. However, a roof rack can keep the rear hatch fully accessible and may be preferable if you frequently tow or use a hitch-mounted cargo carrier. The best choice depends on your loading comfort and the Town & Country s available hitch class.
How many pairs of skis can a typical ski and snowboard carrier hold?
Capacity varies by model but many carriers hold between two and six pairs of skis or a mix of skis and snowboards. Consider the width and mounting orientation of your skis and boards when estimating fit, and check the manufacturer s stated capacity to ensure safe transport for your usual group size.
Do lockable ski racks prevent theft effectively?
Integrated locks reduce the risk of casual theft by securing the carrier and sometimes the attachment to the vehicle. They are not foolproof against determined thieves, but lockable racks provide a meaningful layer of deterrence for most situations. Combine locks with situational awareness and secure parking to lower theft risk.
Can I mount a ski rack to crossbars on my Town & Country?
Many ski racks are designed to clamp onto common crossbar shapes and spacing. Verify the clamp range and mounting hardware are compatible with your Town & Country crossbars before purchase. Proper tightening and periodic checks during a trip help maintain safe attachment.
What is the lowest profile ski rack option for reduced wind noise?
Low-profile carriers that sit close to the roof or hitch and use slim cradles typically generate less wind noise and drag. When prioritizing a low-profile solution, compare how the rack attaches and whether it still offers the capacity and security features you need for the Chrysler Town & Country.
How We Chose the Best Chrysler Town & Country Ski Rack
We focused on racks that are compatible with the Chrysler Town & Country and that address the common ways owners mount ski gear on that vehicle. Our editorial filters prioritized secure attachment methods appropriate for the Town & Country s roof and hitch configurations, durable materials that resist corrosion in winter conditions, and designs that simplify loading and unloading. We evaluated load capacity to ensure multiple skis or boards can be carried safely, and we checked for integrated locking or secure fastenings to deter theft and prevent shift during transit. Ease of installation and whether the rack works with common crossbars or factory attachment points were also important. We excluded mounts that require vehicle-specific drilling or permanent modification, and we did not include models designed exclusively for commercial or heavy-duty utility use. The resulting selection highlights practical, user-friendly racks that suit passenger-vehicle needs and Town & Country mounting options.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right ski rack for a Chrysler Town & Country comes down to matching mounting type, capacity, and ease of use with your typical trips. Prioritize a rack that fits your vehicle s mounting points, offers enough capacity with a safety margin, and includes practical features like locks or low-profile design. Balance convenience against aerodynamic impact and installation complexity. Focusing on compatible mounting, secure attachment, and weather-resistant construction will give you reliable ski transport throughout the season.
Explore More:
- Check out all Chrysler Town & Country parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
