Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
A properly functioning parking brake is essential for holding your Ford Fusion securely when parked on inclines or during maintenance. Choosing the right parking brake cable affects safety, pedal or lever feel, and long-term reliability. This guide highlights seven shortlisted parking brake cables that meet typical Ford Fusion fitment requirements and strong durability expectations. We evaluated each option for fit, corrosion resistance, and ease of installation to help you pick a cable that gets your vehicle back to safe operation. Read on for the factors that matter and our top picks.
Looking for other parts? See all Ford Fusion parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Dasbecan Universal Rear Disc/Drum Parking Brake Cable Kit (330-9371) |  |
| Most Popular A crowd favorite that many people choose with confidence | Dorman C660183 Front Parking Brake Cable |  |
| Best Quality Built to a higher standard if you want something more solid | LoloWheat Electric Parking Brake Actuator Motor (left & right) |  |
| Best Budget The cheapest option that still gets the job done reliably | Dorman Front Parking Brake Cable C94507 |  |
| Most Sold A high-volume bestseller chosen again and again | Shtuomoland Electric Parking Brake Actuator Motor Kit (Left & Right) |  |
| Best Value for Money The sweet spot between price and what you get | Dorman C93527 Rear Passenger Parking Brake Cable |  |
| Best Overall The best all-around choice for most situations | Farpida SLY-10500 Parking Brake Cable Coupler Removal Tool (14") |  |
1. Dasbecan Universal Rear Disc/Drum Parking Brake Cable Kit (330-9371)
| Model | Parking Brake Cable Kits |
|---|---|
| Manufacturer Part Number | 330-9371 |
| Inner Cable Length | 110" |
| Sheath Length | 97" |
This Dasbecan kit provides a universal solution for replacing or fabricating rear parking brake cables on a Ford Fusion when the factory cables are worn or unavailable. It includes 110 inch inner cables with a 97 inch sheath, an equalizer assembly, clevises and mounting hardware so you can cut and fit the cable and housing to the exact routing required. The braided stainless steel inner cables resist corrosion and run smoothly through trimmed housing, which helps maintain reliable handbrake engagement after installation. Installation requires cutting the housing and inner cable to length and securing the U-shaped clamp ends with the supplied screws, so you will need basic hand tools and some cable-fitting experience to achieve a proper, straight run and correct pedal travel. This kit is best when a direct-fit replacement is not sold or you need extended cable length for custom routing; it is not a plug-and-play OEM replacement and may require fabrication to match Fusion-specific end fittings.
Best for: Ford Fusion owners who need to replace a damaged rear parking brake cable or fabricate a custom-length cable when a factory-style replacement is unavailable.
Less Ideal for: Owners who want a plug-and-play OEM replacement with vehicle-specific end fittings and exact factory fitment without any modification.
- Includes long 110" inner cables and 97" sheath for custom routing or longer runs
- Braided stainless steel inner cable offers improved corrosion resistance and smooth operation
- Complete kit includes equalizer, clevises and mounting hardware for one-stop fabrication
- Not a vehicle-specific direct-fit kit so some modification and trimming are required
- Does not include cable swaging tools or ferrules which may be needed for a professional finish
Verdict A versatile stainless braided cable kit good for custom repairs on a Ford Fusion but not a direct OEM plug-and-play replacement.
2. Dorman C660183 Front Parking Brake Cable
| Manufacturer | Dorman Products |
|---|---|
| Model | C660183 |
| Exterior | Machined |
| OEM Part Number | 51005; 51036; 51047; 51089; BC140731; BC351840; BC95743; C914394; F140731; 1C3Z-2853-AA; F81Z-2853-AA |
This Dorman front parking brake cable is built as a direct replacement to restore handbrake function on compatible Ford vehicles. It is typically used when the factory cable frays, corrodes, or snaps and needs a like-for-like swap to regain parking brake engagement. The cable features corrosion-resistant zinc-plated fittings, lubricated inner cables and a conduit-covered flexible casing to reduce wear and keep the inner cable moving smoothly. In practice this means easier installation and a restored feel at the handbrake with reduced risk of sticking in corrosive environments. Several owners report simple bolt-in installs and reliable fitment when the correct cable is selected for the vehicle. Limitations to expect are that aftermarket cables can vary in long-term durability versus factory parts and some users have reported premature failures at high-stress points, so plan for inspection after initial miles. Also confirm the exact trim and end fittings before purchase since fit depends on specific vehicle configurations.
Best for: Ford Fusion owners looking for a factory-quality replacement parking brake cable to restore handbrake function after a failure or corrosion-related problem.
Less Ideal for: Drivers who prefer OEM-direct parts from the dealer or who need a universal cable solution that fits multiple vehicle types.
- Engineered to match original fit and function on specified Ford models
- Corrosion-resistant zinc-plated fittings for better life in wet conditions
- Inner cable is lubricated and sheathed to improve smooth operation
- Flexible conduit covering protects the inner cable from abrasion during use
- Long-term durability has mixed reports with some users experiencing breakage within a year
- Fitment depends on selecting the correct end style and vehicle trim
Verdict A practical, corrosion-resistant replacement cable that restores parking brake function when you pick the exact fit for your Ford Fusion, but inspect for long-term durability.
3. LoloWheat Electric Parking Brake Actuator Motor (left & right)
| Brand | LoloWheat |
|---|---|
| Model | Electric Parking Brake Actuator Motor |
| Manufacturer Part Number | DG9Z2B713A , DG9C2B713AA |
| Item Weight | 2.9 pounds |
These LoloWheat actuator motors replace the electric parking brake units that sit near the rear brakes and apply clamping force to hold the car when the parking brake is engaged. For a Ford Fusion with a failed actuator, these units are used in place of the factory motors and connect to the existing brake caliper cables or wiring to restore parking-brake function. The listing includes left and right motors with sealing rings and claims quality inspection before shipping. In practice the parts appear to provide the core function you need: reestablishing an operable electric parking brake and preventing rollback on slopes. Expect a direct-replacement style installation that requires basic mechanical access to the rear calipers and reconnection of the parking-brake electrical plug or cable. Important limitations are typical of aftermarket actuators: fit and connector details can vary by year and trim so verify exact part numbers or compare to your original units before ordering, and professional installation may be needed if programming or brake adjustment is required.
Best for: Ford Fusion owners who need to replace a failed electric parking brake actuator and want a ready pair to restore rear parking-brake operation.
Less Ideal for: Drivers who prefer dealership parts with guaranteed fitment or those who want a plug-and-play unit without any possibility of calibration or connector differences.
- Includes both left and right actuator motors for a complete rear-axle replacement
- Designed to restore electric parking brake function so the vehicle holds on slopes
- Ships with sealing rings to help protect the actuator from road contaminants
- Aftermarket fit may require verification against the Fusion's original part numbers and connectors
- May require professional installation or brake system calibration on some Fusion model years
Verdict A complete left/right aftermarket actuator pair that can restore a Fusion's electric parking brake affordably, but confirm part numbers and be prepared for possible installation or calibration needs.
4. Dorman Front Parking Brake Cable C94507
| Brand | Dorman |
|---|---|
| Material | Zinc |
| Model | C94507 |
This Dorman front parking brake cable is a direct-fit replacement intended to restore handbrake operation by replacing a worn or broken driver-side cable. It is used where the factory cable has frayed, stretched, or seized and you need a straightforward swap to return proper parking-brake engagement. The cable is engineered to match original fit and routing, with zinc-plated fittings to resist corrosion and a fully covered conduit to protect the inner lubricated cable from wear. In practice that means installation should restore smooth actuation and longer service life compared with a bare or heavily corroded original. Expect a straightforward repair when the correct application is selected, but double-check vehicle fitment carefully because incorrect selection is a common source of mismatch. Some installations can be tight and require wheel removal or negotiation of the under-dash mechanism, so plan for basic hand tools and a little patience during routing and connection.
Best for: Ford Fusion owners looking for an affordable, factory-style replacement to restore a failing front parking brake cable for routine repairs.
Less Ideal for: Drivers who want a universal or adjustable cable solution or those without basic mechanical skills and tools who prefer professional installation.
- Direct-fit replacement engineered to match factory fit and function
- Zinc-plated fittings reduce corrosion at connection points
- Inner cables are sheathed and lubricated for smoother long-term operation
- Conduit-covered casing protects inner cable from abrasion during use
- Requires careful fitment selection to avoid ordering the wrong cable
- Installation can be physically demanding on some vehicles and may require additional disassembly
Verdict A budget-friendly, factory-style front parking brake cable that restores function when you pick the correct fitment, but confirm application and be prepared for a hands-on install.
5. Shtuomoland Electric Parking Brake Actuator Motor Kit (Left & Right)
| Compatible models | Fusion 2013-2018 (as listed) |
|---|---|
| Quantity | Pair (left and right) |
| Replaces part numbers | DG9Z2B712A, DG9Z2B713A |
This pair of electric parking brake actuator motors replaces the left and right rear actuator units and restores electronic parking brake function. They are intended to mount at the rear brakes and, when the parking brake switch is used, apply pressure through the caliper linkages to hold the car stationary. Typical use is a direct replacement for failed actuators that cause parking brake warnings, inability to engage the brake, or uneven rear brake application. Notable features include included sealing rings and fitment for a range of Ford models listed by the manufacturer. For a Ford Fusion owner the most relevant benefit is that the kit covers Fusion year ranges specified by the maker, providing a like-for-like replacement that can return normal parking-brake operation without modifying the car. Limitations are that these are aftermarket parts so fit and long-term durability can vary by unit, and installation requires basic brake access and mechanical familiarity or professional fitment. Expect to test the system and clear any fault codes after installation.
Best for: Ford Fusion owners who need a direct replacement for failed rear electric parking brake actuators and want a paired kit to fix both sides at once.
Less Ideal for: Drivers who prefer OEM factory parts or want a plug-and-play warranty-backed module from the vehicle manufacturer should consider factory-sourced replacements instead.
- Sold as a complete left and right pair so both sides are renewed at once
- Includes sealing rings to help protect the actuator from moisture and contamination
- Direct replacement for the listed Fusion model years so no aftermarket adjustment should be required
- Restores electronic parking brake function and can prevent parking-related fault messages
- Aftermarket quality and long-term reliability may vary compared with factory-quality parts
- Installation requires access to the rear brake area and may need a scan tool to reset parking brake faults
Verdict A cost-effective paired aftermarket actuator kit to restore parking-brake function on listed Ford Fusion years, but expect variable long-term durability compared with factory parts.
6. Dorman C93527 Rear Passenger Parking Brake Cable
| Manufacturer Part Number | C93527 |
|---|---|
| Model | Dorman C93527: Parking Brake Cable |
| Exterior | Machined |
| Manufacturer | Dorman Products |
The Dorman C93527 is a direct-replacement rear passenger parking brake cable intended to restore a vehicle's parking brake operation. It is used in place of a worn or broken cable when the parking brake fails to hold or the lever feels loose. Dorman reports corrosion-resistant zinc-plated fittings, a lubricated inner cable and a fully covered flexible casing to reduce internal wear and extend service life. For routine repairs this means easier installation and a part that resists rust in areas exposed to road salt and moisture. The cable is engineered and tested to match original fit and function for specific applications, so it should line up with factory mounting points and hardware without major modification. Limitations are that compatibility must be confirmed for your trim and year and installation still requires basic brake knowledge and tools; the listing does not include additional hardware beyond the cable itself. For a Fusion owner seeking a straightforward replacement that focuses on durability and fit, this addresses the essentials without extras.
Best for: Ford Fusion owners needing a direct parking brake cable replacement who want a durable, factory-style part for routine repairs.
Less Ideal for: Shoppers looking for a full parking brake kit with multiple cables or extra hardware should consider complete kits instead.
- Engineered to match original fit and function for specific vehicle applications
- Corrosion-resistant zinc-plated fittings improve longevity in wet or salted conditions
- Inner cable is lubricated and sheathed to reduce internal wear and binding
- Flexible casing fully covered with conduit to protect the inner cable from abrasion
- Compatibility depends on exact model year and trim so fit must be verified before purchase
- Does not include additional parking brake hardware or fasteners that some repairs may require
Verdict A practical factory-style replacement cable that prioritizes corrosion resistance and fit for owners replacing a failing parking brake on compatible Ford vehicles.
7. Farpida SLY-10500 Parking Brake Cable Coupler Removal Tool (14")
| Brand | Farpida |
|---|---|
| Model | Parking Brake Cable Coupler Removal Tool |
| Item model number | SLY-10500 |
The Farpida SLY-10500 is a 14-inch plier-style tool made to eject and reinstall the end of parking brake cables without cutting brackets or improvising with improvised hooks. It is used by sliding the jaws over the cable coupling and compressing to release the retaining spring, which makes disconnecting and reconnecting cable intermediates significantly easier compared with makeshift methods. The long handles give strong leverage for stubborn or corroded connectors, and the maker says the steel is heat-treated for corrosion resistance. In practice the tool shines when you can raise the vehicle and work with room to maneuver, and many users find it speeds a rear cable replacement or adjustment. The main limitations are a small learning curve in tight wheel-well spaces and occasional reports of parts failing under heavy use, so it is best for occasional shop work rather than constant commercial use. For Ford Fusion owners doing DIY parking brake cable work, it simplifies the most fiddly step of the job and reduces the risk of damaging the cable or spring.
Best for: Ford Fusion owners who perform DIY parking brake cable repairs or replacements and want a dedicated tool to speed removal and reinstallation of cable couplers.
Less Ideal for: Professional shops that will use the tool daily or on heavy-duty trucks should consider a heavier-duty or branded commercial tool instead.
- Designed specifically to release and reconnect parking brake cable couplers without cutting or bending brackets
- 14-inch length provides substantial leverage for stubborn or corroded connectors
- Heat-treated steel construction intended to resist corrosion and provide durable torque
- Can be awkward to use in very tight wheel-well or underbody spaces
- Some users report durability problems under heavy or repeated commercial use
Verdict A simple, levered coupler plier that makes removing and reinstalling parking brake cables on Ford Fusion models much easier, provided you do light to moderate DIY work rather than heavy commercial use.
Choosing the Right Ford Fusion Parking Brake Cable: Key Factors to Consider
Fitment and Vehicle Compatibility
Ensuring the cable is designed for the exact make, model, year, and trim of your vehicle matters because parking brake cable routing, attachment points, and lengths vary. A proper-fit cable reduces the risk of improper tension, rubbing against other components, or stretching prematurely, all of which can lead to reduced braking effectiveness or premature failure.
When buying, verify that the part is specified for your Ford Fusion and its production year. Choosing a cable that matches factory mounting hardware and end fittings simplifies installation and helps maintain correct cable alignment. Fitment also affects safety inspections and roadside reliability, so accurate compatibility checks are essential.
Material Quality and Corrosion Resistance
Cables operate in a harsh environment where moisture, road salt, and debris can accelerate wear. Higher-quality inner cables and outer housings that resist corrosion and fraying last longer and maintain smoother operation. Materials such as galvanized or stainless steel for the inner cable and durable, sealed outer sheaths prevent binding and performance loss.
Durability reduces the frequency of parking brake cable replacement and lowers the chance of sudden failures. Inspect product descriptions for corrosion-resistant features and protective coatings, since these features directly impact longevity, especially in regions with winter road treatments.
Construction and Design Features
Build details such as cable core diameter, number of strands, end fitting designs, and sheath construction affect strength and performance. A thicker core and multiple strand construction provide better tensile strength and resistance to stretching, which preserves hold force over time. End fittings that match OE geometry ensure the cable interfaces properly with the lever, equalizer, and brake hardware.
Consider features that simplify installation, like pre-formed bends, integrated brackets, or adjustable ends. Well-designed cables reduce the likelihood of kinks and provide reliable motion transfer from the handbrake or foot pedal to the rear brakes, which matters for consistent parking brake engagement.
Performance and Adjustability
How well a cable transmits force and how easily it can be adjusted are central to effective parking brake operation. A cable that stretches or binds will need frequent adjustment and can yield a weak hold. Look for designs that allow straightforward tensioning so you can achieve the recommended pedal or lever travel and holding force.
Adjustability matters during installation and as the brake shoes or pads wear. A cable with accessible adjustment points helps maintain correct tension without extensive disassembly. Reliable performance and easy adjustment contribute directly to safety and usability.
Installation and Maintenance Considerations
Some cables are straightforward to install with common tools, while others require partial disassembly of underbody components or special tools. Evaluate whether the cable comes with necessary hardware or if additional clips, bolts, or retainers are needed. Simpler installations reduce labor time and the chance of installation error that can impair brake performance.
Maintenance factors include the ability to lubricate or inspect the cable without major removal and whether replacement intervals are likely based on local conditions. Choosing a cable that is accessible and serviceable makes long-term upkeep easier and reduces overall ownership effort.
Warranty and Manufacturer Support
A warranty signals confidence in materials and workmanship and provides recourse if the cable fails prematurely. Warranties vary in length and coverage, so consider what is protected, whether labor is included, and how claims are handled. Good manufacturer support can also provide installation guidance and parts clarification.
Reliable support matters when you need assistance confirming fitment, obtaining replacement hardware, or addressing defects. A clear warranty coupled with accessible customer service reduces risk and can save time and expense if problems arise after purchase.
FAQ
How do I know if my Ford Fusion parking brake cable needs replacement?
Common signs include the parking brake feeling loose or requiring excessive travel to engage, visible fraying or corrosion on the cable, or the vehicle rolling slightly when the brake is set. It often depends on driving conditions and age, so inspect the cable and linkage regularly and consult a mechanic if you notice reduced effectiveness.
Can I replace a Ford Fusion parking brake cable myself?
Many people with basic mechanical skills can replace the cable using common tools, a jack, and stands to access the underside. The job usually involves detaching the old cable from the lever and rear assemblies, routing the new cable correctly, and adjusting tension. If you are unsure about safety or alignment, it is usually best to seek professional help.
What should I look for when choosing a replacement emergency brake cable for a Ford Fusion?
Focus on build quality, corrosion-resistant materials, correct length and end fittings, and compatibility with the Ford Fusion model year. Look for components that match the factory routing and attachment points to avoid fitting issues. Durable coatings and properly formed terminals often lead to longer service life.
How is a parking brake cable adjusted after installation on a Ford Fusion?
Adjustment is typically done at the handbrake lever or an inline adjuster on the cable by tightening until the lever has the correct travel and the brakes hold the vehicle securely. The goal is balanced tension so the brake engages without excessive lever travel and without dragging the rear brakes. Follow vehicle-specific guidance or a repair manual for precise adjustment steps.
What causes premature failure of a handbrake cable on a Ford Fusion?
Premature failure often results from corrosion, water and road salt exposure, damage from debris, or improper routing that causes excessive bending. Lack of lubrication at moving points can also accelerate wear. Regular inspection and timely replacement when wear appears can reduce the risk of sudden failure.
Will replacing the parking brake cable fix a parking brake that does not hold on a slope?
Replacing a worn or damaged cable often restores proper function if the cable was the primary issue. However, the problem can also involve worn rear brake components, seized linkages, or improper adjustment. A thorough inspection of the entire parking brake system usually provides a clear diagnosis.
How We Chose the Best Ford Fusion Parking Brake Cable
To create this list we focused on the specific needs of Ford Fusion owners who need a direct-replacement parking brake cable. Primary evaluation criteria included correct fitment and OEM-equivalent routing so the cable installs without modification; corrosion resistance in exposed sections to prevent premature failure; cable strength and sheath durability to maintain consistent braking action; and ease of installation including available hardware or end fittings that match factory connections. We also considered manufacturing quality control and user feedback on long-term performance. Exclusions: we excluded universal or adjustable cables that require significant modification, and any options that did not clearly specify Ford Fusion compatibility. The result is a curated set of cables that prioritize safe, reliable operation and straightforward installation for the Ford Fusion platform.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing a parking brake cable on a Ford Fusion, prioritize correct fitment, corrosion resistance, and construction quality to ensure reliable parking-brake operation. Consider sheath durability and whether the replacement includes compatible hardware to simplify installation. Balancing ease of installation with long-term durability will usually result in the best ownership experience and reduce the chance of repeat repairs.
Explore More:
- Check out all Ford Fusion parts & accessories
- Explore Brake System
- Browse all Auto Parts
